“22 Plinkster” is an avid shooter who has produced a number of entertaining videos for his YouTube Channel. In the video below, he tackles the question “Why Do Misfires Occur in .22 LR Rimfire Ammunition?” This is the most common question posed to 22 Plinkster by his many viewers. He identifies four main issues that can cause .22 LR misfires or faulty ignition:
1. Damaged Firing Pin — The dry firing process can actually blunt or shorten the firing pin, particularly with older rimfire firearms. Use of snap caps is recommended.
2. Poor Ammunition — Some cheap brands have poor quality control. 22 Plinkster recommends using ammo from a manufacturer with high quality control standards, such as CCI and Federal.
3. Age of Ammunition — Rimfire ammo can function well for a decade or more. However the “shelf life” of rimfire ammunition is not infinite. You ammo’s “lifespan” will be shortened by heat, moisture, and humidity. You should store your rimfire ammo in a cool, dry place.
4. Mishandling of Ammunition — Tossing around ammunition can cause problems. Rough handling can cause the priming compound to be dislodged from the rim. This causes misfires.
Preventing misfires is essential if you want to succeed in NRL22 competition and other rimfire competition disciplines run “on the clock”.
The National Shooting Sports Foundation (NSSF) has prepared tips for gun owners transporting firearms in their vehicles. Whenever you are driving with guns (of any kind), the firearms should be transported securely. In some states, the firearms must be in locked cases inside the vehicle. And, with the rise of break-ins on parked vehicles, it’s important to keep gun cases out of sight if possible. This article has tips on safe and secure gun transport.
HERE Are Key Guidelines for Safe, Secure Handling of Firearms in Vehicles:
• Take note of and safely control the muzzle direction of firearms in vehicles. This is one of the main rules of gun safety and applies to the inside of vehicles as well as any other location.
• When finished using your firearm outside your vehicle, unload it before you re-enter your vehicle.
• Even after a long hunt or a day in the sun at the range, always check, and then double check, that guns are unloaded before placing them in a car or truck.
• Be very careful if you must unload a firearm in the confined space of a vehicle so as not to have an accidental discharge. If your location allows, it is safer and easier to unload the firearm outside the vehicle.
• Never leave firearms in parts of the vehicle accessible to children or pets.
• Keep firearms and ammunition out of sight to avoid tempting thieves.
• Use secure temporary storage for firearms in vehicles.
• A lockable gun case or a lock box may be the most practical choice to securely store a gun in a vehicle. These come in a range of prices and models.
• If you’re concerned about quick access to your firearm, many types of lockable safes allow for extremely fast access of your gun while at the same time helping to prevent unauthorized access.
• Secure the lock box to the vehicle, if possible. Some companies make custom concealed compartments for specific model vehicles.
Storing Firearms in Vehicles to Prevent Theft and Misuse
Unfortunately, thefts of firearms from vehicles are on the rise. Thieves commonly steal cars and trucks even when they don’t obviously contain firearms — a reminder that vehicle door locks are not totally secure. And there are major issues now with the electronic key fobs — criminals have ways to detect and copy the key fob signal, allowing them to open your vehicle, start the motor, and then drive away.
When you are not in your vehicle, all firearms should be placed in locked storage and out of sight. Locking the doors on your vehicle does not constitute secure firearm storage. As one writer put it: “Cars and trucks aren’t safes. And they’re not holsters. They’re not storage containers.”
It’s now Day 3 at SHOT Show 2026. There are impressive new offerings from hundreds of manufacturers. In today’s story we feature some notable new rifles, pistols, and suppressors. To learn more about new-for-2026 products, check out the SHOT Show Blog which had these recent features:
SHOT Show is one of the biggest trade shows of the year among ALL industries. This year there are thousands of exhibitors spread out over two exhibit halls the combined size of 14 football fields (19 acres)! This is the 9th largest trade show in the USA, promoting an industry that supports over 380,000 jobs and generates over $26 billion in wages.
Savage Revamps Multiple Rifle Models
As displayed at SHOT Show 2026, Savage Arms has updated its rifle line-up, including the Savage 110, signaling a major refresh across multiple platforms. While specifics are still limited, these changes point toward improved features and modern refinements throughout the lineup. This video features GunsAmerica Media Editor True Pearce, who recently tested many new firearms at Industry Day at the Range.
New CZ Rimfire Match Rifle for Position Shooting Competitions
The new CZ 457 Target is a break-through. This is the first high-end rimfire rifle CZ has crafted for high-level 3P competition. Purpose-built for ISSF 3-position and 3P Olympic competition, the new CZ 457 Target in .22 LR features a fully-adjustable aluminum chassis, fully-adjustable trigger and a longer, 26-inch Match barrel with 12 grooves and a target crown.
New Rifle Builder PRO Platform
At SHOT Show 2026 our friend Gavin Gear has introduced an impressive new software/info system for gunsmiths and gun-building operations. RifleBuilderPro.com provides key specifications and data for smithing operations. But it is more than just about machine controls — Rifle Builder PRO will be a comprehensive platform for precision gunsmiths including: Comprehensive cartridge and rifle action information, Integrated tooling solutions, Digital machining companion, Training for seasoned machinists and newcomers, and Online community. Stay tuned for a more complete report in the weeks ahead.
New Trends in Suppressors — Elimination of NFA Tax Stamp Fee
Thanks to the Trump Administration, the expensive cost of a Tax Stamp for a Silencer/Suppressor has been eliminated. You still have to fill out paperwork, but suppressors are now MUCH more affordable. The $200 NFA tax stamp for suppressors (silencers) and other items like Short-Barreled Rifles (SBRs) was eliminated effective January 1, 2026, meaning the monetary fee is now $0, but the registration process through the ATF (forms, background checks, fingerprints) remains mandatory. The change significantly lowers the cost barrier to owning these items, making them more accessible, but does not remove them from National Firearms Act (NFA) oversight.
The elimination of NFA fees is creating a huge growth in the suppressor markets. At SHOT Show 2026 several suppressor makers have showcased innovative designs and affordable options. This video reviews Dead Air Silencers and the cutting-edge technology behind their most innovative suppressor designs with lightweight titanium construction. Highlighted in this video are the RXD910Ti and RXD22Ti, highlighting their advanced materials, impressive sound suppression, and multi-platform versatility. Also featured is the Nomad Ti OTB, an over-the-barrel design.
Evolution of SIG Sauer’s M7 Military Rifle — Updates
In this video, TFBTV’s James Reeves chats with SIG Sauer about the SIG M7 rifle and what has changed since the M7’s adoption by the U.S. Army. While the M7 has already entered service, SIG explains that the platform is still evolving through the Army’s Product Improvement Effort, driven by real soldier feedback rather than a ground-up redesign. Updates focus on reducing weight, shortening the system with an 11-inch barrel, refining the suppressor, and improving handling without walking back the performance goals of the 6.8×51 cartridge. This conversation breaks down what was changed, why it was changed, and how the M7 continues to mature as the Army\s next-generation service rifle.
New High-BC Sierra MatchKings and New GameKing Bullets
Sierra has released a large selection of new match and hunting projectiles. There are new GameKings, 7 new tipped MatchKings, and two impressive new all-metal MatchKings — .22 Cal 77gr and 6mm 105gr. The new 105-grainer MK caught our attention. Sierra claims that its new 105gr MatchKing is the highest BC 105-grain bullet available, delivering an unmatched blend of speed and high BC. Sierra says the new 105gr SMK (non-tipped) offers the BC performance of heavier bullets while maintaining the velocity advantage of a lighter projectile.
Beretta B22 Jaguar .22 LR Pistol
The team at All4Shooters.com spotted a cool new rimfire handgun, the Beretta B22 Jaguar. This new blowback semi-auto handgun is an innovative chassis gun. Controls are ambidextrous and you can even choose left-side or right-side ejection. The mechanical system is Ruger-type, with a bolt that is cocked by operating the two rear serrated ears. The double-stack magazine has a capacity of 15 rounds. The standard B22 Jaguar pistol is priced at $699.00, while the B22 Jaguar Competition, featuring match barrel, compensator, and thumb rest, is $999.00.
SHOT Daily Magazines Feature New Guns, Optics, Products
Want more information on new firearms and gun gear? Then check out SHOT Daily Magazine. Shown below are the digital edition covers for the SHOT Daily Day 2 and Day 3 magazines distributed at SHOT Show. The Day 2 issue features new scopes and ammo products while the Day 3 issue features a variety of topics including notable shooters. Click either Day 2 or Day 3 cover pages below to launch the full digital versions which you can read online for free.
The Making of MatchKings — How Sierra Produces SMKs
All Sierra bullets begin life as a strip of gilding metal, an alloy consisting of 95% copper and 5% zinc. To meet Sierra’s strict quality requirements, the gilding metal requires three times more dimensional and quality control standards than is considered standard in the copper manufacturing industry.
A blanking press stamps out a uniform disc and forms the cup that will be drawn into the MatchKing jacket. The cup is then polished and sent to a draw press to be drawn into a jacket that is longer than needed for the future MatchKing, thus allowing for the trim process. Press operators constantly check concentricity to ensures jacket quality. The jackets then go to a trimmer where they are visually inspected again.
After being polished a second time, the jacket travels to the bullet press. In the meantime, 80-pound lead billets are being extruded into lead wire for the cores where great care is taken so that the core wire is not stretched. The core wire is lightly oiled before continuing to the bullet press to be swaged.
The lead core wire and trimmed jacket meet at the bullet press where the first stage forms a boattail on the jacket. The lead core is then formed on top of the bullet press and fed down into the jacket. In one stroke of the press, the MatchKing is formed.
Quality control technicians pull samples from each lot of MatchKings to make sure they meet Sierra’s stringent standards. Samples are then sent to Sierra’s 300-meter underground test range (shown below) to be shot for accuracy on mechanical mounts referred to as “unrestricted return to battery rests” that Sierra designed and built in-house.
After inspection, the bullets are placed in the familiar green box along with reloading labels. They are then shrink-wrapped and shipped all over the world.
The NSSF’s 5th Annual Governors’ Forum at SHOT Show 2026 was held on Wednesday, January 21, 2026, in the Lido Room at the Venetian Expo in Las Vegas. The event featured State Governors discussing Second Amendment rights, gun laws, and the firearm industry’s future. Confirmed speakers included Governors Sarah Huckabee Sanders (AR), Brad Little (ID), Greg Gianforte (MT), Jim Pillen (NE), Joe Lombardo (NV), and Mark Gordon (WY), moderated by Shermichael Singleton.
Topics: Legislative landscape, gun control challenges, and safeguarding lawful gun ownership.
This forum provided a platform for state leaders to speak directly with industry members and media about critical issues facing the Second Amendment. The annual Attorneys General and Governors Forums provided expert insight on what is being done to protect and promote Second Amendment rights. In the audience were nfluencers, TV hosts and journalist reporting on industry developments.
It is now Day Two of SHOT Show 2026 in Las Vegas. There are huge crowds visiting the thousands of display booths in the “miles of aisles” (19 acres to be precise). Over 52,000 people have registered for the event. This year’s SHOT Show encompasses two facilities — the Venetian Expo AND the new Caesars Forum. Combined, these facilities provide over 830,000 net square feet of exhibit space. The two trade show halls are connected by an elevated walking bridge.
CLICK HERE for the searchable database of all SHOT Show 2025 exhibitors.
Today, as part of our Day Two coverage of SHOT Show 2026, we feature videos and images of new rifles from Smith & Wesson, CZ, Century Arms and new chassis systems from MDT. Other major makers, including Beretta, Bushmaster, FN, Remington, Rossi, SIG Sauer, and Tikka have many new guns on display at SHOT Show 2026.
Interesting New Products at SHOT Show 2026
Century Arms ATA ALR — Affordable Precision Rifle
At SHOT Show, Century Arms showcased the new ATA ALR Tactical Rifle. Chambered in .308 Win or 6.5 Creedmoor, this modular rifle comes complete with adjustable aluminum chassis and muzzle brake. This could be a good starter rifle for PRS/NRL competition that does double duty as a hunting rig. And the ATA ALR is just $1099.99. That’s a great deal — you can pay that much just for an aftermarket chassis system.
Smith & Wesson New Metal-Frame Handguns
Smith & Wesson has many new products coming out in 2026. Many impressive new handguns have been seen at this year’s SHOT Show. This video covers some very impressive S&W handguns that feature aluminum and steel frames. The first pistol is the S&W SPEC VI with aluminum frame, ported barrel, and pre-installed Aimport optic. Next the reviewer covers the impressive steel-framed HD series pistols — both standard and competitor models. With good ergonomics and triggers, these are great for action pistol games.
MDT New Ultra-Light Chassis — Just 3.2 Pounds
In this video MDT Product engineer Josh Botha reviews the new MDT DRT lightweight chassis. This was designed for lighter weight for easier carry in the field by hunters. DRT stands for “Dead Right There” and this models was designed for “precision night hunting”. The chassis bare weight is just 3.2 pounds a significant reduction compared to previous MDT ACC chassis systems.
Ryan Cleckner — New Seekins SIC Multi-Caliber Sniper Rifle
Ryan Cleckner is a respected gun journalist and former Army Sniper marksman and Sniper Instructor. In this video, at the 1:00-minute mark, Ryan spotlights the innovative Seekins SIC rifle crafted specifically for U.S. Special Operations. This rifle is designed to allow quick and easy barrel/bolt/magazine swaps so you can shoot multiple cartridge types with the same rifle. The Seekins SIC rifle is built to withstand extreme environments while letting the operator rapidly select and swap calibers to meet mission criteria. The $8900.00 Seekins SIC is a “purpose-driven, modular system” — not a chassis retrofitted to accept a barreled action.
New Hunting Rifles — Many Rifles Reviewed
This video reviews multiple hunting rifles, many of which were introduced in the last 12 months. This employs manufacture-supplied video clips, but it’s a good starting point if you’re shopping for a new hunting and/or varmint rifle. The video covers the pros and cons of these hunting rigs. Note, there is considerable annoying commentary in this video, but it does have good footage of the rifles and shows the bolts working and the rifles cycling. In order, the featured rifles are:
0:55 Bergara Platinum Stalker
2:30 Weatherby Mark V Backcountry Capra
2:52 Bergera Premier Cima Pro
5:32 Henry SPD Predator
7:06 Ruger American Rifle Gen II Prairie
8:34 Marlin 1894 Trapper (10mm)
10:15 CZ 600+
11:10 Previous CZ Models
11:45 Weatherby Model 307 Alpine ST
13:28 Smith & Wesson Model 1894 Stealth Hunter
15:06 Christiansen Arms Evoke
16:36 Bergara BMR-X (rimfire)
Handgun Shorts — CZ and Walther
NEW Nightforce NX6 Scope Family for 2026
Nightforce’s new NX6 riflescopes offer lightweight configurations with an impressive 6X magnification range across the series. NX6 options include: NX6 1-6x24mm, 2-12x42mm, 3-18x50mm, 4-24x50mm, and 5-30x56mm. NX6 scopes are designed for wide field of view and good clarity. The FieldSet turret system provides great repeatability and tracking while offering ease of use and configurability, allowing shooters to convert from capped to exposed dials and custom Bullet Drop Compensating (BDC) dials.
SHOT Daily Magazines Feature New Firearms
Want more information on new firearms and gun gear? Then check out SHOT Daily Magazine. Shown below is the digital edition cover for the SHOT Daily Day 1 magazine distributed at SHOT Show. The Day 1 issue features new rifles, shotguns, and pistols (pp. 30-42), and there is a good feature article on suppressors (pp. 64-71). The Day 2 issue should be released later today. Click the Day 1 cover page below to launch the full version which you can read in full for free.
New Product Center
The New Product Center is a “must-see” offering at the Venetian EXPO. There are dozens of interesting and innovative new products all in one convenient location. On display were rifles, pistols, optics, electronics, gunsmithing tools, holsters, and dozens of other products.
Useful reloading gear does not have to be costly. Here are ten handy (and very inexpensive) items that belong on your loading bench or in your range kit.
• Magnifying Glass – We use a flat, 2″x2″ pocket 4x-8x magnifier. This folds up on itself. Very handy, we use it to inspect bullets and brass. Use this to check your flash holes for burrs, and check the meplats of your bullets before loading.
• Clear 35mm Film Cannister – Use this to transfer the thrown powder charge to the little measuring cup that sits on your scale. That way you don’t get any kernel splash. Also if the charge weight is obviously off, it’s easy to dump back in the measure. A film canister works pretty well as a trickler too.
• Compressed Air in a Can -- Get these at office supply stores. Use the can (with tube attached) to blow crud out of cases after cleaning the neck with a brush, and blast loose debris out of primer pockets.
• Pin Vise – A simple pin vise with a #53 bit is perfect for deburring small PPC and BR flash holes without reaming the flash-holes any larger. The Lapua PPC/BR flash-hole diameter is 1.5 mm, or 0.059″. Amazon.com sells a handy $8.29 pin vise kit with 10 bits, including the ideal 1.5mm bit. Other vendors offer a #53 pin vise bit that measures .0595″ or .060″ (depending or source). You can find pin vises and bits at hobby stores — here’s an example below with ten bits including 1.5mm. Pin vise sets can be found from $7 to $15.
• Bounce Dryer Sheets – The common dryer sheets eliminate “static cling” on your plastic reloading parts such as powder measure cylinders, powder funnels, and reloading press plastic bins. Thanks to Doc76251 for this tip.
• Ballistol Aerosol – Try using this versatile lubricant/solvent for full-length sizing. Spray some on a patch and you can wipe the carbon off your case necks. Then, continue to apply a very small amount of Ballistol on the case bodies — just thin sheen is all you need. Ballistol is super slippery, and easy to remove. For general full-length sizing (on small cases) it works great and doesn’t leave a gooey, waxy, or chalky residue. For heavier case-forming jobs, we recommend Imperial Die Wax.
• Shotgun Mop – Stick this in the chamber when using Wipe-Out foaming bore cleaner. This will seal off the chamber so the foam doesn’t flow into your action. For long chambers screw on one section of cleaning rod to aid extraction.
• Colored Sharpie Marking Pens – Mark your bullets ahead of the bearing surface, and the color transfers to the target. This way you can shoot multiple loads at the same point of aim and discern which load shoots the tightest. (Recommended for 300 yards and beyond). With colored bullet tips you can test multiple loads “round robin” to equalize wind effects. When testing seating depths for example, you can mark the longer-seated set of bullets red and the shorter-seated set green and shoot them during the same sequence. Just look at the colored marks on the target to see which grouped better.
• Thin Latex Gloves – You should keep a box of inexpensive, disposable latex gloves (the kind doctors use) in your loading room. These will prevent contamination of primers or powder kernels that you handle directly. Also, use the gloves when handling fine blued tools or firearms to prevent transfering body oils and salts that promote rust.
• Plastic Washers for Neck Mic – If you use a Sinclair Neck-wall Micrometer Gauge with integral stand, you can use thin plastic washers to adjust the height of the case on the mandrel. This makes it much easier to measure the same point on the case neck every time. Thanks to MikeCR for this tip (and photo).
Some years ago, the folks at TargetWorkz published a a handy set of plans for a 48-inch tall self-supporting target stand. This makes a great do-it-yourself project. To create a sturdy, self-supporting target frame, all you need are some 2x4s, 1x2x48 furring strips, plus fasteners. The target holder, which supports an 18×24 inch cardboard target backer, separates from the base for easy transport.
Note: There is no cross-piece shown in the plan, but we do recommend putting wood crosspieces at the top of the target stand and about 18″ up from the bottom. This will make the frame more rigid, and will allow the frame to work even if the cardboard is badly “shot up”. Use a T-square to set the crosspieces before attaching them with screws.
Alternative Target Stand May from ABS or PVC Pipe
If you like this kind of project, but want to build a frame that is taller, yet can break down into sections, we also have an article showing you how to build a nice frame with inexpensive ABS or PVC tubing. VIEW ABS/PVC Tubing Target Frame Plans.
The 2026 SHOT Show (Shooting, Hunting, and Outdoor Trade Show) is officially underway in Las Vegas, with the full opening this Tuesday morning, January 20, 2026. Thousands of new products are on display at SHOT Show 2026, hosted at the Venetian Expo/Convention Center and Caesars Forum in Las Vegas. Gunmakers from around the world will be introducing hundreds of new (and updated) rifles, pistols, and shotguns. Along with the new guns, SHOT Show will feature noteworthy new optics, electronics, reloading equipment, hunting gear, and accessories.
The 2026 SHOT Show combines exhibit space at Caesars Forum and The Venetian Expo with a bridge between the two facilities. This year more than 2,700 exhibitors will showcase their products on 830,000+ net square feet (19 Acres!) of floor space. SHOT Show is the largest trade show of its kind in the world. Total attendance at last year’s SHOT Show exceeded 54,000 exhibitors, buyers, media, and industry professionals from 50 states and over 115 countries.
Here are 4 interesting products from SHOT Show 2026. Click each Image for more details.
SHOT Show Supplier Showcase — Monday and Tuesday
The SHOT Week Supplier Showcase returns this year with 600+ suppliers and countless materials and solutions. After a great first day yesterday, the Supplier Showcase kicks off its second and final day in the 5th Floor Palazzo Ballroom of The Venetian Convention Center.
SHOT Show 2026 INFO Sources
SHOT Show TV and YouTube — For all SHOT Show TV product highlights, interviews and overall show coverage, visit the SHOT Show Youtube Channel. SHOT Show Daily News — The SHOT News Blog Page has multiple daily reports and links to key content. Social Media — For real-time highlights and breaking news from the show, the SHOT Show’s Facebook, Instagram, YouTube, and X (Twitter) feeds offer regular reports with interviews, photos, and videos. SHOT Show Mobile App — Download the SHOT Show 2026 Mobile App for real-time show announcements, interactive floor maps, meeting and scheduling functions, product-information downloads (including product scanning at the New Product Center), SHOT Show video feeds and more!
Here’s an inexpensive product that can make your case prep and loading tasks easier. We use and recommend the cleverly-designed Lyman Bleacher Blocks. These multi-level (stepped) cartridge holders save space on your bench AND make it easier to select a particular case/cartridge from a full block. Each row is a different height for convenience. With Bleacher Blocks it’s also easier to check for powder levels, or place bullets before the seating process.
Lyman’s Bleacher Block cartridge holders have many advantages over conventional, single-level blocks. Use the different levels for sorting brass. Or, migrate the brass from top to bottom as you proceed through case prep stages. If you are assembling loads with different bullets for load testing, you could arrange the loaded rounds on different levels for easy recognition. For example put V-Max loaded rounds on the top tier, and Berger Hybrid loaded rounds on the bottom tier. Or, if you are experimenting with neck tension, you can use different rows for cases processed with different bushings.
Made of durable orange polymer, Lyman Bleacher Blocks are now molded in five sizes — small pistol, large pistol, and three rifle sizes. The smallest rifle block (with 0.388″-diam holes) fits .223 Rem-size case heads. The middle size rifle block (with 0.485″-diam holes) fits .308 Win-size case heads. That works for 6mmBR/Dasher sized cases perfectly. The biggest rifle Bleacher Block has 0.565″-diameter recesses for magnum-size cases. There are also two pistol blocks — .445″ hole size for 9mm/.357 size and .565″ diameter for larger .44/.45 pistol cartridges.
Here’s what Lyman says about its innovative cartridge block design: “Our [stepped] loading blocks allow for easier handling of cases in and out of the loading block. Our stepped design allows you to easily grip a single case without jamming your fingers down into a group of cases like in traditional loading blocks, and allows for a smaller ‘footprint’ on your bench.”
Top Image courtesy Cheaper Than Dirt Shooters Log.
• Magnifying Glass – We use a flat, 2″x2″ pocket 4x-8x magnifier. This folds up on itself. Very handy, we use it to inspect bullets and brass. Use this to check your flash holes for burrs, and check the meplats of your bullets before loading.
• Ballistol Aerosol – Try using this versatile lubricant/solvent for full-length sizing. Spray some on a patch and you can wipe the carbon off your case necks. Then, continue to apply a very small amount of Ballistol on the case bodies — just thin sheen is all you need. Ballistol is super slippery, and easy to remove. For general full-length sizing (on small cases) it works great and doesn’t leave a gooey, waxy, or chalky residue. For heavier case-forming jobs, we recommend Imperial Die Wax.
