Here’s a nice do-it-yourself project for the winter. Simpson, maker of Strong-Tie fasteners, offers FREE Workbench Plans for a sturdy, 48″-wide bench with a pegboard backing and both upper and lower shelves. A complete list of fasteners and cut lengths is provided. For use as a loading bench with mounted presses, you can double-up the bench-top for extra ridigity. Without much difficulty, the plans can be adapted to build a wider bench if you prefer.
The same downloadable document also contains plans for an 80″-high 6-shelf unit, a 72″-high heavy-duty shelving unit (with 4 shelves), and a 48″-wide heavy-duty table.
Share the post "FREE Plans for Heavy-Duty Workbench"
Here’s a nice do-it-yourself project for the summer. Simpson, maker of Strong-Tie fasteners, offers FREE Workbench Plans for a sturdy, 48″-wide bench with a pegboard backing and both upper and lower shelves. A complete list of fasteners and cut lengths is provided. For use as a loading bench with mounted presses, you can double-up the bench-top for extra ridigity. Without much difficulty, the plans can be adapted to build a wider bench if you prefer.
The same downloadable document also contains plans for an 80″-high 6-shelf unit, a 72″-high heavy-duty shelving unit (with 4 shelves), and a 48″-wide heavy-duty table.
Share the post "Build Your Own Workbench–Free Plans"
Here’s a great do-it-yourself project for the winter. Texan Robert Lewis made himself a great portable reloading bench from plywood mounted to a Black & Decker Workmate. The bench, roughly 22″ x 19″ on top, folds up to fit easily in your car’s trunk or behind the seats in a pick-up truck cab. Four recessed bolts hold the wood top section to the collapsible B&D Workmate.The sides and back of the unit are attached to the base with small nails. There is a small shelf (also nailed in place) which can be used to clamp a powder measure or hold a scale. Shown in the photo is a Harrell’s Benchrest measure and Harrell’s single-stage “C” press.
The whole unit can be built for about $65.00 with pine, or $80.00 with oak (as shown). Robert explained: “The Workmate was $40. If someone bought a 2’x4′ sheet of 3/4″ oak plywood, I think it is around $30. Using pine plywood would be about half that. Fasteners were $3. Spar Urethane would be $5.”
Robert told us: “I used a couple ideas I found on the web. The Larry Willis website gave me the idea to use the Black and Decker Workmate as a base. I found the Workmate on sale for $40 and the top is made from oak plywood I had in my shop. I sealed the wood with three coats of Spar Urethane. The whole thing folds into a nice package for transportation to and from the range.” Click Here to view a set of plans.
Share the post "Portable Reloading Bench–Free Plans"
A while back, we featured a portable reloading bench built on a Black & Decker Workmate. That proved a VERY popular do-it-yourself project so we’re showing it again, in case you missed it the first time.
Texan Robert Lewis made himself a great portable reloading bench from plywood mounted to a Black & Decker Workmate. The bench, roughly 22″ x 19″ on top, folds up to fit easily in your car’s trunk or behind the seats in a pick-up truck cab. Four recessed bolts hold the wood top section to the collapsible B&D Workmate. The sides and back of the unit are attached to the base with small nails. There is a small shelf (also nailed in place) which can be used to clamp a powder measure or hold a scale. Shown in the photo is a Harrell’s Benchrest measure and Harrell’s single-stage “C” press.
Originally, the whole unit could be built for about $65.00 with pine, or $80.00 with oak (as shown). Robert explained: “The Workmate was $40. If someone bought a 2’x4′ sheet of 3/4″ oak plywood, I think it is around $30. Using pine plywood would be about half that. Fasteners were $3. Spar Urethane would be $5.” [Editor: We have seen major inflation — the Workmate is now $90+ and you’ll be spending more for the wood, so figure the whole project might be $150.00.]
Robert told us: “I used a couple ideas I found on the web. The Larry Willis website gave me the idea to use the Black and Decker Workmate as a base. I found the Workmate on sale for $40 and the top is made from oak plywood I had in my shop. I sealed the wood with three coats of Spar Urethane. The whole thing folds into a nice package for transportation to and from the range.”
NOTE: Since we first ran this story, the price of a Black & Decker Workmate WM225 has increased substantially. But good news — Amazon is currently selling WM225-A Workmates for $77.78, a decent price, particularly for Prime members who get FREE shipping. And for the same $77.78 price at Home Depot, you can get the Workmate WM225 with Local Store Pickup or home delivery (in most states).
One of the most unique and popular air rifle matches in the world takes place next week in Arizona. The Extreme Benchrest Championship, hosted by Airguns of Arizona, takes place October 6-9, 2022 in Phoenix, Arizona. This is the 11th annual Championship and Airguns of Arizona plans on making this the biggest and best one yet. NOTE: The event name is a bit of a misnomer. This is NOT just a benchrest match. In fact this event encompasses multiple airgun disciplines — Benchrest, Silhouette, Field Target, and Action Steel — with targets at 50, 75, and 100 yards.
About the Extreme Benchrest Championship in Arizona
Extreme Benchrest earns its name with airguns being shot as far as 100 yards outdoors where the elements will test the best in ammunition, air rifle, and shooter. With very few limitations on equipment, this all-inclusive match is exciting and truly a test of marksmanship. This multi-discipline event tests shooters in precision as well as speed and adaptability in the field. Along with traditional Benchrest shotoing, the event includes Speed Silhouette, Big Bore, Field Target, and Action Steel shooting. Manufacturers from across the globe are providing top level prizes and awards. Competitors will participate with some of the finest air-gunners in the country. CLICK HERE for more information.
This video is WORTH WATCHING — it shows multiple disciplines and many airgun types:
Sightron Will Be Major Sponsor of Extreme Benchrest Championship for Air Rifles
“We are very excited to be the official optics sponsor of this incredible championship,” said Mack Matsumoto, President of Sightron. “Sightron optics are made to compete at the highest level. The SII Blue Sky 20-60×85 HD spotting scope will definitely be a huge advantage for the competitors utilizing them. The new S6 series of riflescopes among others will be on display during the championship.” To learn more about the complete Sightron product line, go to Sightron.com or visit Sightron’s Facebook Page.
Sightron will be sponsoring the attendee goodie bag with several promotional items. Sightron is also providing a $2899.99 SVIII 5-40x56mm ED Illuminated LRM riflescope for the raffle. Sightron will bring multiple SII Blue Sky 20-60×85 HD angled spotting scopes for viewing by spectators. Several of these will be linked to televisions in the attendee shooting area.
Share the post "Extreme Benchrest Airgun Match in Phoenix October 6-9, 2022"
A while back, we featured a portable reloading bench built on a Black & Decker Workmate. That proved a VERY popular do-it-yourself project so we’re showing it again, in case you missed it the first time.
Texan Robert Lewis made himself a great portable reloading bench from plywood mounted to a Black & Decker Workmate. The bench, roughly 22″ x 19″ on top, folds up to fit easily in your car’s trunk or behind the seats in a pick-up truck cab. Four recessed bolts hold the wood top section to the collapsible B&D Workmate. The sides and back of the unit are attached to the base with small nails. There is a small shelf (also nailed in place) which can be used to clamp a powder measure or hold a scale. Shown in the photo is a Harrell’s Benchrest measure and Harrell’s single-stage “C” press.
The whole unit can be built for about $65.00 with pine, or $80.00 with oak (as shown). Robert explained: “The Workmate was $40. If someone bought a 2’x4′ sheet of 3/4″ oak plywood, I think it is around $30. Using pine plywood would be about half that. Fasteners were $3. Spar Urethane would be $5.”
Robert told us: “I used a couple ideas I found on the web. The Larry Willis website gave me the idea to use the Black and Decker Workmate as a base. I found the Workmate on sale for $40 and the top is made from oak plywood I had in my shop. I sealed the wood with three coats of Spar Urethane. The whole thing folds into a nice package for transportation to and from the range.”
NOTE: Since we first ran this story, the price of a Black & Decker Workmate WM225 has increased. However you can still pick a WM225 Workmate for under $75.00. Amazon is currently selling WM225 Workmates for $70.34. The next best price we found was $72.96 at Home Depot, still a good price (Lowe’s is charging $94.98).
A while back, we featured a portable reloading bench built on a Black & Decker Workmate. That proved a VERY popular do-it-yourself project so we’re showing it again, in case you missed it the first time.
Texan Robert Lewis made himself a great portable reloading bench from plywood mounted to a Black & Decker Workmate. The bench, roughly 22″ x 19″ on top, folds up to fit easily in your car’s trunk or behind the seats in a pick-up truck cab. Four recessed bolts hold the wood top section to the collapsible B&D Workmate.The sides and back of the unit are attached to the base with small nails. There is a small shelf (also nailed in place) which can be used to clamp a powder measure or hold a scale. Shown in the photo is a Harrell’s Benchrest measure and Harrell’s single-stage “C” press.
The whole unit can be built for about $65.00 with pine, or $80.00 with oak (as shown). Robert explained: “The Workmate was $40. If someone bought a 2’x4′ sheet of 3/4″ oak plywood, I think it is around $30. Using pine plywood would be about half that. Fasteners were $3. Spar Urethane would be $5.”
Robert told us: “I used a couple ideas I found on the web. The Larry Willis website gave me the idea to use the Black and Decker Workmate as a base. I found the Workmate on sale for $40 and the top is made from oak plywood I had in my shop. I sealed the wood with three coats of Spar Urethane. The whole thing folds into a nice package for transportation to and from the range.”
Editor’s NOTE: In the time that’s transpired since we first ran this story, the price of a Black & Decker Workmate has gone up. However you can still pick a WM225 Workmate for under $60.00. Amazon is currently selling WM225 Workmates for $59.58. The next best price we found was $69.61 at Home Depot, still a good price (Lowe’s is charging $94.98).
A while back, we featured a portable reloading bench built on a Black & Decker Workmate. That proved a VERY popular do-it-yourself project so we’re showing it again, in case you missed it the first time.
Texan Robert Lewis made himself a great portable reloading bench from plywood mounted to a Black & Decker Workmate. The bench, roughly 22″ x 19″ on top, folds up to fit easily in your car’s trunk or behind the seats in a pick-up truck cab. Four recessed bolts hold the wood top section to the collapsible B&D Workmate.The sides and back of the unit are attached to the base with small nails. There is a small shelf (also nailed in place) which can be used to clamp a powder measure or hold a scale. Shown in the photo is a Harrell’s Benchrest measure and Harrell’s single-stage “C” press.
The whole unit can be built for about $65.00 with pine, or $80.00 with oak (as shown). Robert explained: “The Workmate was $40. If someone bought a 2’x4′ sheet of 3/4″ oak plywood, I think it is around $30. Using pine plywood would be about half that. Fasteners were $3. Spar Urethane would be $5.”
Robert told us: “I used a couple ideas I found on the web. The Larry Willis website gave me the idea to use the Black and Decker Workmate as a base. I found the Workmate on sale for $40 and the top is made from oak plywood I had in my shop. I sealed the wood with three coats of Spar Urethane. The whole thing folds into a nice package for transportation to and from the range.”
Editor’s NOTE: In the time that’s transpired since we first ran this story, the price of a Black & Decker workmate has gone up. However you can still pick a WM225 Workmate for under $65.00. Target is currently selling WM225 Workmates for $64.99.
Building your own portable shooting bench is a great do-it-yourself project. You can build a sturdy bench for well under $100 in materials. Compare that to some deluxe factory-built benches which may cost $500.00 or more.
FREE Bench Plans on the Web
You’ll find a wide assortment of home-built shooting bench designs (both portable and fixed) on the internet. Renovation Headquarters has links to FREE Plans and building instructions for fourteen (14) different shooting benches. There are all-wood shooting bench designs as well as benches that combine a wood top with a metal sub-frame or legs.
Roy Bertalotto is an author, precision shooter, varmint hunter and part-time gunsmith. On his website, RVBPrecision.com, you’ll find many interesting feature stories, including “how-to” articles. One project that caught our eye was Roy’s clever rotating-top shooting bench. Simple to build from low-cost components, Roy’s bench design features a raised center section that traverses on rollers. This allows you to move your rifle through a wide arc without having to move your front rest or rear sand bag. Roy’s bench can be built for a fraction of the cost of the big, heavy carousel-style varmint benches. This would make a nice, winter project for anyone handy with simple tools. For a set of plans and list of materials, send email to Robert: RVB100 [at] comcast.net.
This picture shows a conventional front pedestal rest used with a benchrest type rifle. As you can see, the top swivels, allowing a tremendous sweep of the varmint fields.
The swiveling top moves on metal rollers. These roller devices are available from Trend Lines, or Woodworkers warehouse. Two are required at the front of the movable top.
Below is a close-up of the pivot point.
A conventional folding table leg (from Woodworkers Warehouse) is used in the front. In the rear, Roy’s table uses a single leg fabricated from tubing and aluminum angle iron. This creates a tripod. The three-legged design provides more room for the shooter, and is easier to set up on uneven ground.
Photos courtesy Roy Bertalotto.
Share the post "Build a Swivel-Top Shooting Bench"
Eurenco, current owner of the Vihtavuori Oy powder manufacturing facility in Finland, has been seeking a new owner for the facility for many months. Well it looks like there is a buyer, Nammo Group, parent company of Lapua. The acquisition is not final — “Due Diligence” must still be completed. However, if the deal goes through, this will be good news for fans of Vihtavuori rifle and pistol propellants such as the popular N133, N135, N140, N150, and N320. N133 is winningest modern powder in the short-range benchrest game and N320 is an outstanding pistol powder favored by many .45 ACP bullseye competitors. Here is the text of the notification issued Friday August 30, 2013 by the Nammo Group.
Share the post "Nammo Plans to Acquire Vihtavuori Powder Plant in Finland"
A while back, we featured a portable reloading bench built on a Black & Decker Workmate. That proved a VERY popular do-it-yourself project so we’re showing it again, in case you missed it the first time.
Texan Robert Lewis made himself a great portable reloading bench from plywood mounted to a Black & Decker Workmate. The bench, roughly 22″ x 19″ on top, folds up to fit easily in your car’s trunk or behind the seats in a pick-up truck cab. Four recessed bolts hold the wood top section to the collapsible B&D Workmate.The sides and back of the unit are attached to the base with small nails. There is a small shelf (also nailed in place) which can be used to clamp a powder measure or hold a scale. Shown in the photo is a Harrell’s Benchrest measure and Harrell’s single-stage “C” press.
The whole unit can be built for about $65.00 with pine, or $80.00 with oak (as shown). Robert explained: “The Workmate was $40. If someone bought a 2’x4′ sheet of 3/4″ oak plywood, I think it is around $30. Using pine plywood would be about half that. Fasteners were $3. Spar Urethane would be $5.”
Robert told us: “I used a couple ideas I found on the web. The Larry Willis website gave me the idea to use the Black and Decker Workmate as a base. I found the Workmate on sale for $40 and the top is made from oak plywood I had in my shop. I sealed the wood with three coats of Spar Urethane. The whole thing folds into a nice package for transportation to and from the range.”
Editor’s NOTE: In the time that’s transpired since we first ran this story, the price of a Black & Decker workmate has gone up. However you can still pick a WM225 Workmate for under $60.00. Target is currently selling WM225 Workmates for $59.99.
Here’s a great do-it-yourself project for the winter. Texan Robert Lewis made himself a great portable reloading bench from plywood mounted to a Black & Decker Workmate. The bench, roughly 22″ x 19″ on top, folds up to fit easily in your car’s trunk or behind the seats in a pick-up truck cab. Four recessed bolts hold the wood top section to the collapsible B&D Workmate.The sides and back of the unit are attached to the base with small nails. There is a small shelf (also nailed in place) which can be used to clamp a powder measure or hold a scale. Shown in the photo is a Harrell’s Benchrest measure and Harrell’s single-stage “C” press.
A while back, we featured a portable reloading bench built on a Black & Decker Workmate. That proved a VERY popular do-it-yourself project so we’re showing it again, in case you missed it the first time.
Eurenco, current owner of the Vihtavuori Oy powder manufacturing facility in Finland, has been seeking a new owner for the facility for many months. Well it looks like there is a buyer, 
