AccurateShooter’s Editor trains with .22 LR Anschutz model 64R back in 2008.
Rimfire Tactical Matches Aren’t Really New
NRL22 and PRS 22 rimfire shooting disciplines are fun, affordable forms of competition. We’re pleased to see the rapid growth of NRL22 and PRS rimfire. However, the concept of a rimfire tactical/practical match is not new — at least on the West Coast. Way before anyone every heard of PRS, California shooting clubs conducted “Rimfire Tactical” matches. These matches were first fired nearly two decades ago. CLICK HERE to read our comprehensive Rimfire Tactical report from way back in 2008. That article includes free targets, ballistics charts, and a complete run-down on suitable rimfire rifles.
The Concept Behind the Rimfire Tactical Match by Bill Erwin
Many guys who shoot long-range tactical matches practice with .22 LR rifles of similar configuration. Rimfire ammo is way more affordable than centerfire, you do not need a big range facility, and shooting rimfire saves wear and tear on your centerfire rifle. Further, for learning how to read the wind, there really is no better training tool than a 22 LR, even as close as 50 yards. Check out this table showing how a .22 LR ballistics compare to .308 Win:
.22 LR vs. .308, Distances for Equal 10 MPH Wind Drift
This table shows the corresponding distances at which a 10 mph full-value crosswind pushes a .22 LR bullet and .308 projectile the same amount. Values are based on 0.130 BC for a 40gr .22 LR bullet, and 0.496 BC for 175gr .308 bullet.
22 LR 40gr 1050 fps
50 yd Wind 1.0″
75 yd Wind 2.2″
100 yd Wind 3.8″
125 yd Wind 5.8″
150 yd Wind 8.2″
175 yd Wind 11.0″
200 yd Wind 14.3″
.308 Win 175gr 2650 fps
130 yd Wind 1.07″
180 yd Wind 2.15″
230 yd Wind 3.68″
280 yd Wind 5.63″
330 yd Wind 7.98″
380 yd Wind 10.71″
440 yd Wind 14.56″
This table shows how the .22 LR can be an effective substitute for a .308 Win during training. Because the smaller bullet drifts more in the wind, a .22 LR rimfire shooter will experience roughly the same crosswind effects as if he was shooting a 175gr .308 Win twice as far out. So, rimfire work can teach you to dope the wind like a .308 Win, but at less than half the distance. Shooting a .22 LR at 100 yards is like shooting a .308 Win (with 175gr SMK) at 230 yards.
SPECIAL BONUS–Rimfire Tactical Precision Targets
These FREE targets by DesertFrog are offered in Adobe Acrobat format for easy printing. CLICK HERE to download all six targets as a .ZIP archive.
Rimfire Training Target for Fun Matches
Here’s a rimfire training target with “big to small” target circles. Start with the largest circles, then move to the smaller ones in sequence. This systematic drill provides increasing challenge shot-by-shot. Novices often are quite surprised to see their accuracy improve as they move from bigger to smaller aiming points. That provides positive feedback — always a good thing.
Right Click and “Save as” to download printable PDF versions of target.
The 2025 F-Class Nationals took place recently at the Winnequah Range in Wisconsin. The match was run superbly with an excellent target system. Competitor John Masek, who finish 10th in F-Open, noted: “Congrats to all the winners in both Mid and Long Range — there were no ‘gimme’ matches the whole week. It was an awesome match and the folks at Winnequah put on a hell of a match. We had hundreds of devices on the Shotmarker system at one time and I don’t remember it ever going down because of it. Great weather and a tricky tricky range led to all kinds of shake-ups each day especially as long range went on.” The winds did become challenging on the final day said Winnequah staffer Kevin Liebetrau.
The Winnequah Gun Club in Lodi, Wisconsin, hosted the NRA F-Class National Championships from August 2nd to 9th, attracting top-tier competitors. This premier event has two main categories: F-Open and F-TR, each with specific equipment and caliber rules. The championship employed ShotMarker Electronic Target Systems for real-time scoring at both Mid-Range (600 yards) and Long-Range (1000 yards).
F-Class Long Range Nationals Top 10 Finishers, F-Open and F-TR
Congratulations to Ryan Mitchell for winning the 2025 F-Open Long-Range Nationals.
Congratulations to Keith Trapp for winning the F-TR Long-Range Nationals for the second time!
Team Competition at the F-Class Nationals
Here is a video from the Long Range Teams Match.
In Team Competition, the Bayou Boys won F-Open with a 1578-72X score with Team Lapua just six Xs behind with 1578-66X. In F-TR division, Team USA F-TR Berger took the title with a 1542-33X score. In second was Team USA F-TR Vihtavuori with a 1527-36X score.
SEE: F-Open Team Results; F-TR Team Results.
Keith Trapp Wins F-TR LR National Championship
Team Lapua’s Keith Trapp won the F-TR division of the USA F-Class Long Range National Championship, with an impressive 1558-58X Aggregate score. This marks Trapp’s second F-Class National Championship win. Trapp won his first F-Class Long Range title in 2022, and his first Mid-Range title in 2023.
“I’m incredibly proud of this win,” said Trapp. “The competition was fierce, but my equipment, particularly the Berger bullets, Vihtavuori powder, and Lapua cases, performed flawlessly, giving me the confidence I needed to perform at my best. It’s truly an honor to win this title for a second time.”
Keith Trapp’s confidence was significantly aided by his choice of ammunition. He relied on Berger 200.20X bullets, propelled by Vihtavuori N150 powder, loaded into Lapua .308 Win Palma cases. Trapp is set to compete this September on the international stage at the upcoming European F-Class Nationals.
Top F-TR finishers in the Long Range Competition. Dale Lucy on left, and Keith Conrad on right. First-place finisher Keith Trapp holds the trophy. Keith won the title the hard way, overcoming a crossfire on Day One. This was a great performance.
Dale Lucy’s F-TR Rifle with Barrel Tuner and SEB Joy-Pod front joystick-adjustable bipod.
Competitor Mike Cateena noted that there was “challenging weather this week for the 2025 US F-Class National Championship and amazingly the rain held off until the finish of the last day.” Mike added: “And congratulations to all the winners and a huge congratulations to the USA F-TR Rifle team — you guys absolutely crushed it at Nationals this year! And thank you Winnequah Gun Club for doing an amazing job at hosting this year’s F-Class Nationals and thank you Criterion Barrels, Inc., Krieger Barrels and Brux Barrels, LLC for supporting the match.”
Competitor F-Class John, who finished 10th in the Long Range event, said the match was run really well and the support services provided to competitors were excellent.
2025 Mid-Range F-Class Nationals Results
The 2025 F-Class Mid-Range Nationals were held August 2-5 at the Winnequah Range. Remarkably, the top five F-Open shooters all finished with 1796 points, dropping only 4 points in nine stages, earning 1796 out of 1800 possible points. Randy Snook won the F-Open Class shooting a 6BRA with a 1796-127X score, winning the title on X-count. Here are the scores for the top five Mid-Range F-0pen shooters: Randy Snook 1796-127X; Brad Johnson 1796-118X; Johnny Ingram 1796-117X; Andy Amber 1796-116X; Dave Lyons 1796-106X.
The top five Mid-Range competitors all finished with 1796 points, dropping just 4 points on 180 targets!
In the F-TR Division (limited to .223 Rem and .308 Win), Gabriel Gavrock secured the 2025 Mid-Range Title with a 1785-100X Score. In second was Lusty Leo Cebula with a 1782-94X score. Finishing third was David Schmidt with 1781-97X. It’s notable that Gabe Gavrock (below left in photo) is just 19 years old — so this is a great start to his marksmanship career. Gabe is a member of the Under-25 United States Rifle Team. He is the only junior to ever win a USA F-Class Nationals event.
A three-judge panel of the 10th U.S. Circuit Court of Appeals blocked New Mexico’s 7-day waiting period on firearm purchases. In the Ortega v Grisham case, the 10th Circuit panel ruled that the law infringes on Second Amendment rights. Judge Tymkovich, writing for the court, determined that the right to keep and bear arms necessarily includes the lawful acquisition of firearms and, therefore, “cooling off” waiting periods infringe on Second Amendment-protected conduct. The court noted that waiting periods are a modern invention that are unsupported by our nation’s historical tradition of firearm regulation. The case has been sent back to a lower court for injunction specifics. CLICK HERE for full 10th Circuit Decision.
Background: New Mexico enacted a law requiring a 7-day waiting period for firearm purchases. The law was challenged by the NRA and Mountain States Legal, arguing it infringed on the Second Amendment. The lawsuit cited concerns about delayed access to firearms for victims of domestic violence and other crimes.
After the Second Amendment victory in Ortega v. Grisham, John Commerford, NRA-ILA Executive Director, released the following statement:
“In courtrooms across America, the NRA is successfully leading the charge to protect law-abiding Americans’ Second Amendment rights. The 10th Circuit has sided with the NRA and held that radical waiting period laws are indeed unconstitutional. This decision not only impacts gun owners in New Mexico, Colorado, Utah, Wyoming, Kansas, and Oklahoma, but serves as a key piece in dismantling similar gun control laws across the country.”
History of the case
On May 15, 2024, the NRA, in coordination with the Mountain States Legal Foundation, filed Ortega v Grisham, a lawsuit challenging New Mexico’s radical seven-day waiting period law.
On Monday, July 22, 2024, the U.S. District Court for the District of New Mexico denied the plaintiffs’ motion for a temporary restraining order and preliminary injunction against New Mexico’s law requiring individuals to wait seven days before taking possession of any firearm they purchase.
Today, August 19, 2025, the 10th Circuit Court reversed and remanded this decision, ruling the law is unconstitutional and ordered a preliminary injunction to ensure the rights of law-abiding citizens are no longer infringed. The full ruling can be found HERE.
This ruling was based on the landmark NRA-backed Supreme Court case New York State Rifle & Pistol Association v. Bruen, which held that gun control laws are unconstitutional unless they are consistent with our nation’s historical tradition of firearm regulation.
August is officially National Shooting Sports Month, sponsored by NSSF, the National Shooting Sports Foundation. This month, head to the range, and bring a newbie to introduce him or her to the sport. NSSF’s +ONE Movement encourages experienced shooters to mentor newcomers, so bring a friend to the range, teach firearms safety, and have fun together. More than 63 million adults and youth participate in target shooting sports, and NSSF invites you to give shooting a try!
1. Rediscover Shooting
Haven’t shot in a while? Dust off your shooting gear. Always check to see if firearms are loaded when removing them from storage. And call an old shooting buddy or family member to join you.
2. Try a Drill or Competition
There are many ways to build shooting skills, but two of the most rewarding ways of self-improvement often come from timed drills, accuracy drills or competitions. Find a drill for you or a local pistol, rifle or shotgun competition. There many even be a multi-gun competition.
3. Take Your First Shots
Safety orientation, range rules, range officers… there are things you need to know about if you haven’t tried target shooting before. Learn about range safety and etiquette and consider taking an introductory class like First Shots.
4. Take a Date to the Range
Make it a date! Ask your spouse/partner to go target shooting with you. You’ll have a great time together. Don’t have someone to go with? Call the range and ask about shooting events and training classes.
5. Be a Mentor
The right teacher makes all the difference when learning a new activity. The +ONE initiative inspires experienced shooters and hunters to guide newcomers and novices on how to safely handle firearms and learn marksmanship skills.
6. Brush Up on Safety
Enroll in a firearm training course or review the rules of firearm safety. Responsible gun owners safely handle their firearms and securely store them when not in use. Check with your local retailer of range for in-person training opportunities.
7. Tune Up for Hunting Season
Hunting is fun and can provide the ability to harvest healthful food. A trip to a firearms retailer or range can help you prepare for hunting season. You can enroll in a hunter education course, find the right gear, and get your rifle sited properly for the fall hunting season.
8. Take Advantage of August Deals
Retailers and ranges will be offering specials during National Shooting Sports Month at thousands of events nationwide. Find a participating business near you to take advantage of these notable offers at ShootingSportsmonth.org.
9. Have A Fun Target Match with Friends
With pistols and rimfire rifles you can have fun shooting indoors, and many ranges are open after work. This is an opportunity to have funs with friends and co-workers. NSSF offers a variety of nice targets you can print out.
10. Share #LetsGoShooting with Friends and Social Media
#LetsGoShooting is the official theme of National Shooting Sports Month. Share your shooting experience on social media networds and encourage other to go to the range for fun, socializing, and training.
Whether you’re new to target shooting, a first-time gun owner or experienced, see what National Shooting Sports Month has to offer at your shooting range or firearm retailer. America’s firearm owners will find National Shooting Sports Month in August a great time to spend a day at the range enjoying their favorite target-shooting sports with friends and family members. It’s also a time for millions of first-time gun owners to check out all that the shooting sports have to offer.
Wind effects are complex. In trying to access wind speeds and angles, you’ll want to watch multiple indicators — mirage, dust, wind-flags, grass movement, and more. You’ll also need to be concerned about wind cycles. In the video below, Bryan Litz talks about variable wind speed along a bullet’s flight path. A respected ballistics guru, Bryan is the founder of Applied Ballistics and a designer of Berger’s Hybrid Match projectiles. He is also a past F-TR National Champion and a High Master Palma ace.
In this video, Bryan discusses how wind effects can vary in intensity at different points along the bullet’s flight path to the target. Sometimes the firing line is sheltered, and the strongest winds come into effect in the middle of the trajectory. Bryan concludes: “Wind matters everywhere … but the best thing you can do is try to get a handle on the wind [velocity and angle] where you are. That may or may not represent the wind down-range — that’s when you have to look downrange and make a judgment[.]”
Litz Competition Tip: Select your wind shooting strategy carefully. For beginners and veterans, most points are typically lost to wind. Successful shooters put a lot of thought into their approach to wind shooting. Sometimes it’s best to shoot fast and minimize the changes you’ll have to navigate. Other times it’s best to wait out a condition which may take several minutes. Develop a comfortable rest position so you have an easier time waiting when you should be waiting.
More Wind Tips from Wind Wizard Emil Praslick
In these two short videos, Emil Praslick III, former coach of the USAMU and USA National long range teams, explains how to find the wind direction and how to confirm your no-wind zero. Praslick is widely considered to be one of the best wind coaches in the USA.
When Winds Are EXTREME — Near Gale Force at Ben Avery
This video shows INSANE winds at NBRSA 100/200 Benchrest Nationals. This was filmed at the Ben Avery Range in Phoenix, AZ during the recent NBRSA 100/200 yard National Championships. Extreme to say the least. Based on what we’re seeing here, there are 20-25 mph crosswinds, with gusts to 35 mph — near Gale Force. Video by Hall-of-Fame Benchrest competitor Gene Bukys, whom we sadly lost to COVID last year. RIP Gene.
Texas gunsmith Mike Bryant reports: “This video shows the Unlimited Class 200 at the Nationals in Phoenix. I had three 10-shot groups in the low 2″ range with a 2.228″ being my big group and was glad they weren’t bigger. Thursday and Friday were the worst of the windy days. Unfortunately those were the days for the UL 200 and it was about as windy through most all of the Sporter 200.”
Excellent Wind Reading Resource
The Wind Book for Rifle Shooters covers techniques and tactics used by expert wind-readers. The authors provide a wind-reading “toolbox” for calculating wind speed, direction, deflection and drift. They explain how to read flags and mirage, record and interpret your observations, and time your shots to compensate for wind. Here are two reviews:
This is a must-have book if you are a long-range sport shooter. I compete in F-Class Open and when read it from cover to cover, it helped me understand wind reading and making accurate scope corrections. Buy this book, read it, put into practice what it tells you, you will not be disappointed. — P. Janzso
If you have one book for wind reading, this should be it. It covers how to get wind speed/direction from flags, mirage, and natural phenomenon. This is the best book for learning to read wind speed and direction. — Muddler
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Graf & Sons — Forster CO-AX Reloading Press, $334.79
⏺️ » Excellent versatile press with good discount
The Forster Co-Ax Reloading Press is one of our favorite presses. With an open front, the Co-Ax features dual floating guide rods. These provide perfect alignment of the die and the case because the shell holder jaws float with the die, thereby permitting the case to center precisely in the die. And as the die slides in a slot with the lock ring (rather than screwing down in a threaded hole), it is fast and easy to change dies. Right now you can save $37 with this Grafs.com sale.
2. MidwayUSA — Major Brands Optics Sale, Huge Discounts
⏺️ » Save on great scopes from Zeiss, Vortex, Leupold, SIG Sauer, Burris
⏺️ » Save big bucks on major-brand target and hunting bullets
Need bullets? Check out Midsouth’s Bulk Bullets Sale. A major U.S. bullet-maker made these poly-tipped bullets for Midsouth using proven designs for hunting, varmint, and target applications. The varmint bullets’ thin jackets allow for rapid expansion, even at lower velocities. These bullets are packaged into polymer bags. That reduces the price by eliminating factory packaging. NOTE: Buyer reports are very positive.
4. Amazon — Derraco PCPS Priming Tool, $199.95
⏺️ » Innovative precision priming tool mounts to press
Turn your standard single-stage reloading press into a precision priming system with the Derraco PCPS Precision Priming die/Primer Seating Tool (#ad). This advanced tool is compatible with any reloading press that accommodates 7/8-14 reloading dies and standard T-shaped shell holders. For a wide variety of single-stage presses, this unique precision priming tool will consistently deliver high-precision results thanks to the precision adjuster and micrometer hard stop.
⏺️ » Good quality, large, rugged rifle case at attractive price
When flying or driving it’s vital to protect your rifles. A good hard case option (at a great price) is the APACHE 9800 Weatherproof Protective Rifle Case. On sale for $149.99, this 53″-long case is $190.00 less than an equivalent-size Pelican case. Constructed from durable polypropylene, this quality hard case can protect long guns from from impact, moisture, and dust. The built-in purge valve equalizes pressure so you can open the case after changing elevations. NOTE: Case interior dimensions are 50⅜” by 13⅝”.
⏺️ » Excellent tool for fast, reliable base-to-ogive measurement
When loading precision ammo, you need to accurately measure the base-to-ogive of loaded rounds. A good tool for this task is the Hornady Lock-N-Load Comparator Kit. This can measure seating depth of loaded ammunition quickly and precisely. Attached to calipers, this measures from the cartridge base to the bullet ogive, ensuring consistent seating. This basic set includes the comparator body, plus 7 inserts covering .224, .243 (6mm), .257, .264, .277, .284 (7mm) and .308 bullet diameters.
⏺️ » Great transport case holds 5 handguns plus magazines.
If you often transport multiple pistols, this is a great travel case. The LOTOCASE TSA-Approved Handgun Case holds 5 handguns, plus 16 magazines and features a rechargeable, moisture-absorbing silica gel canister to prevent gun rust. Well-designed with slots for pistols and mags, this rugged hard case is a good option for handgun competitors. NOTE: For long-term storage, put your handguns in anti-rust fabric sleeves and store in a good gun safe.
8. Amazon — Coobeast 38pcs Digital Torque Screwdriver, $59.98
⏺️ » Advanced, modern tool measures proper torque
Setting proper torque on rings, actions and more is critical to precision shooting. For precise torqueing jobs, we like the Coobeast 38pcs Digital Torque Screwdriver. With a power drive with digital display (and certified calibration), this electric torque screwdriver offers precise torques. The drivers are made of hardened chrome vanadium steel.
9. Midsouth — Primer Sale w/ CCI, Federal, Rem, Magtech & more
⏺️ » Large supply of magnum, large, and small primers at good prices
Over the last few years premium brand primers have been pricey and hard to source. Thankfully, things are getting much better. And right now Midsouth is running a major Midsouth Primer Sale with significant savings on CCI, Federal, Winchester, Magtech and other brand primers. Yes there are large rifle primers along with hard-to-find Federal 205M small rifle primers — popular with competitive shooters. Both 1000ct and 5000ct packages are on sale.
10. Amazon — 52″ Rifle Soft Case, $21.98
⏺️ » Very low price for handy case for long-barrel rifles
Sometimes you just need a simple, basic gun case for taking your rifles to the range in your vehicle. This 52″ Soft Rifle Case can handle those duties and is big enough for competition F-Class and Full-bore rifles. This gun case has decent padding, a water-resistant nylon shell (green, tan, or black), and comes with a handy adjustable shoulder strap. Choose either 52″ case for $21.98 or 42″ version for $19.99.
11. Amazon — Frankford Arsenal Digital Caliper, $37.19
⏺️ » Good features and measures both inches (SAE) and millimeters
Accurate measurement of cartridges and components is critical for precision reloading. All hand-loaders should have a good set of digital calipers. These Frankford Arsenal calipers are accurate to within .001” when measuring case length, neck and base diameters, overall length. These calipers also can show both SAE (inch) and Metric (mm) measurements.
As an Amazon affiliate, this site can earn revenues through sales commissions.
Many short-range Benchresters have thought about converting their 6 PPC to shoot a 30BR for score matches, or a Dasher for mid-range (or even 1000-yard) games. That way you have a rifle that does double duty, giving you the most bang for your buck. Though an action with a PPC bolt won’t normally work with 30BR/6BR/Dasher cases with their larger .308-class rim (0.4728″ diameter), there is a pretty easy solution that allows you to cycle these bigger cartridges with a 6PPC-style bolt (designed to fit .220 Russian rims).
“Rebating case rims … lets you shoot a 30BR in score matches using your PPC action. All you need is a new barrel. This saves buying another bolt, receiver, or rifle.” — Butch Lambert
Butch Lambert of ShadeTree Engineering provided this tip. Butch notes that many 6 PPC benchrest group shooters also enjoy shooting in score matches. But to be really competitive in the BR for score game, that means shooting a 30BR, which has a wider, .308-class rim (0.4728″ diameter). Likewise, if you want to compete in 600-yard registered BR events or in varmint matches, you probably want to run a bigger case, such as the 6BR, 6mm Dasher, or 6-6.5×47. Those cartridges also have the larger 0.4728″ rims.
Rebate Your 30 BR Rims
To convert a PPC-boltface action to shoot bigger cases you can spend a ton of money to buy a new bolt. That can cost hundreds of dollars. The simpler solution is to turn down the diameter of the larger cases on a lathe. Butch explains: “We’ve seen plenty of interest in rebating case rims. This lets you shoot a 30BR in score matches using your PPC action. All you need is a new barrel. This saves buying another bolt, receiver, or rifle if you have a PPC boltface. Anyone who has access to a lathe can do this job pretty easily. Yesterday I turned 150 case in about an hour.”
At right is the lathe form tool Butch uses to rebate the case rims.
Tech Report by Brian Williams
Reloading for a military surplus gun is different than loading for a modern precision rifle in my opinion. There are a few tasks that carry over from one to the other, but the main goal is slightly different. The target shot in the CMP games matches has a rather generous 10 ring, and with a little larger target your focus needs to change from a round with ultra accuracy to a round that is safe and functions well in your particular rifle.
Reloading for Vintage .30-06 Springfield Rifles
Bullet Selection — With the .30-06 for my Garands and Springfields I stick mostly with 168gr bullets plus some 155-grainers. These bullet weights have just worked for me in the past.
Cartridge Brass (Milsurp vs. Commercial) — I use both military and commercial brass, having success with each. I do prefer commercial brass as it is easier to prep for the first reload. Military brass usually has a primer crimp of some kind that needs to be removed, and I have found that trimming these cases can sometimes leave you scratching your head as the OAL on military cases varies considerably.
Powder Charge and Dispensing — I have always had good success with Hodgdon H4895 powder. My load has always been right around 47.0 grains, with both the 168gr and 155gr bullets. I also use the Auto-Trickler to drop all of my powder charges. This is a fantastic piece of equipment that not only gives super-consistent powder charges quickly, but it also makes one less thing that you have to worry about while on the firing line. With the Auto-Trickler, there is never a question about the powder charge in your ammo. As for primers, I have been shooting CCI 200 Large Rifle primers for many years and have never had an issue.
Case Care and Trimming — With most of the .30-06 brass that I use, I will only reload them 5 times maximum. I don’t push the brass too much, because the Garand’s semi-auto cycling can be tough on the cases. I also trim my cases for OAL each reload cycle. I use a Giraud power trimmer, so trimming is relatively quick and easy.
The chambers in some of the older rifles are not perfectly-machined like a modern high-end rifle. This can cause the brass to grow a little inconsistently, so I find trimming every load cycle helps to make sure that everything stays in a nice safe spec.
Case Annealing — A few years ago I started to anneal my .223 Rem service rifle brass. Now I have added that process for all my match ammunition. I anneal after every firing. It is a rather easy step as I can have my auto-feeding Annealeez machine running while doing something else, so annealing does not add a great deal of time or effort to the reloading process.
The .30-06 case was the father of the .308 Winchester, which was adopted as the 7.62×51 NATO cartridge.
VIDEO Showcase — Brian Williams Shoots M1903A3 Prone in May 2021
+ONE Program to Encourage New Shooters
August is National Shooting Sports Month. As part of this effort, the NSSF encourages firearms owners to take one novice to the range this one. This +ONE Movement will help strengthen the ranks of shooters, which, in turn, can help protect our Second Amendment freedoms. The NSSF states: “If just one in three of America’s recreational shooters adds one new person to the shooting sports, we’ll secure a strong future for generations to come. So be the one. For all the thrills and excitement recreational shooting has given you, join the +ONE movement and invite someone to the range today. Share your experience on social media.”
The +ONE campaign seeks to build the ranks of shooters. The NSSF says: “If just one in three of America’s recreational shooters adds one new person to the shooting sports, we’ll secure a strong future for generations to come.” Learn more at LetsGoShooting.org.
As part of the +ONE Movement, the NSSF encourages all participants to practice gun safety and proper firearms handling and storage practices. This video covers basic gun safety procedures:
Today we feature a modern switch-barrel PRS chassis rifle set up for quick changes between 6mm Creedmoor and 6.5 Creedmoor barrels. The owner, Forum member Jeff Cosgrove (aka “Punkur67″) uses the 6 CM barrel for competition, favoring the reduced recoil over its 6.5 mm big brother. He does use the 6.5 CM barrel for practice (given its better barrel life). The 6.5 CM barrel also gives him the chance to shoot a variety of factory 6.5 Creedmoor ammo.
- Terminus Zeus action with Quick Change (QC) barrel option.
– 6mm Creedmoor Pre-Fit Bartlein Heavy Varmint 400MODBB barrel for matches
– 6.5 Creedmoor Pre-Fit Benchmark Heavy Palma barrel for training
– MPA BA Competition chassis with full weight kit
– Zero Compromise Optic ZCO 5-27x56mm FFP scope
– TriggerTech Diamond trigger
This rifle represents an evolution for Jeff. Each step along the way in his PRS journey, he has learned more about what he wants and needs in a competition rifle. And what you see here, from the $3760 ZC527 scope to his high-tech reloading equipment, represents pursuit of excellence. Jeff even created a modern, spacious man cave/reloading center in his new house (photos below).
Quick-Change Barrel System with Terminus Zeus QC Action
This rifle has two pre-fit barrels that work with the Terminus Zeus QC Action for fast and easy barrel swaps. To remove a barrel, you simply release two tension screws on the front of the action and then unscrew the barrel. To swap in a different pre-fit barrel, reverse the process and then tension the screws. The Terminus Zeus is 3-lug receiver with 60° bolt and integral recoil lug. Both the receiver and bolt are DLC-treated. Jeff reports this action is extremely smooth and has met all of his expectations. Some other Zeus features are threaded trigger pins for quick/easy trigger installation, and a roller-tipped cocking piece.
PRS Discipline Offers Fun, New Challenge for Long-Time Shooter
My name is Jeff Cosgrove, I live in Winchester, California and do commercial heating and air conditioning. I have shot for 20+ years but I found my interest in shooting was dwindling over time. I got somewhat bored with shooting paper at 100 yards or plinking cans out in the desert. About 18 months ago I decided I wanted to shoot long range. I picked up a used MPA in .300 Winchester Magnum and started shooting long range with a new buddy. That day I fell in love with guns all over again with more intensity than ever.
How I Got Started in PRS
With that new .300 WM I soon found my reloads were not up to my expectations (high ES/SD), so I purchased all new reloading hardware. One of my purchases was a used Benchsource Annealer. The guy I bought that from asked if I had ever tried PRS and he invited me to check out a match. So I went to a local PRS event as a spectator. I looked at many rigs on the firing line and took notes. By the end of the day I knew this was something I really wanted to do. I then acquired a used chassis rifle that I thought would work well for PRS. I went to a PRS match the following month but shot poorly.
After working with that first PRS rifle, a 6.5 CM with Stiller Tac30 action, MDT chassis, and Proof Carbon-wrapped barrel, I quickly learned that gun did not handle and balance the way I hoped.* It was too light in the front, the ergos were poor, and scope eye relief was not optimal. So I decided to build my own GEN 2 PRS rifle. This is the story of how I put together my new switch-barrel rig that I now use in competition.
PRS Rifle and Gear Selection — Learning What Works
Barrel availability was limited given the current shortages. Luckily I was able to obtain a 6mm Creedmoor pre-fit Bartlein Heavy Varmint 400MODBB from Southern Precision Rifles. The 6mm Creedmoor is notorious for being a barrel burner cartridge so I went with the special 400MODBB metal. Bartlein says that barrel life expectancy is 1.5 to 2 times longer than the standard 416 grade steel. I also purchased a 6.5 Creedmoor pre-fit Benchmark Heavy Palma barrel for training (Source: Straight Jacket Armory). With the Terminus Zeus quick change system I am able to swap from my match barrel to my trainer barrel in just a couple minutes. I loosen two set screws, unthread the barrel, thread the new barrel on, and torque the set screws to 10 inch-pounds. This also affords me caliber options in case I’m in a pinch for ammo. If I have some 6.5 CM loaded up and don’t have time to load 6mm Creedmoor for a match, then I’m covered.
For the trigger, I went with a TriggerTech Diamond Pro curve model. I have Timney, Jewell, and TriggerTech triggers in other rifles. I like them all but I liked the feel of the TT Diamond the best so that is what I used on this build. I set my triggers around 18-20 oz. — I am not a fan of ultra-light trigger pulls.
MPA BA Competition Chassis with Added Weight
I went with an MPA BA Comp chassis with full internal and external weight kit. I also have Gray Ops external weight on the handguard. I had the same chassis on my .300 WinMag and felt very comfortable with it. I took a PR1 class and found that, with a different gun, I had to force a comfortable hand position for proper trigger pull. After that class I grabbed my MPA and my hand fell in to the perfect position. I did not need to hunt or index my hand with the MPA. The built ARCA rail (RAT) lowered the rifles center of gravity more than my old setup with the ARCA rail bolted to the bottom of the handguard. With the current configuration, the rifle weighs in at 24 lbs. and balances three inches in front of the magwell. I now have the flexibility to add, subtract, or move approximately 6 lbs. of weight.
The Attraction of PRS/NRL Practical Competitions
I really enjoy PRS-style shooting because there seems to be a new challenge every time you compete — no matter what. With PRS I am shooting many different positions and ranges with the pressure of a stopwatch. This keeps things interesting for me. I have taken a few training classes to help establish good, clean fundamentals.
Jeff says it is hard to practice for the many unconventional shooting positions at PRS matches.
My biggest challenges so far have been: 1) building stable shooting positions that I have not practiced enough; 2) proper equipment selection; and 3) time management. Regarding the shooting positions — PRS/NRL is not like F-Class where you can always practice from one position. And it’s hard to practice for unusual set-ups (barriers and positions) you’ve not encountered before. Concerning equipment — you need some experience in the game to determine what really works best for you.
Innovative Zero Compromise Optic — Optimized for the Tactical Game
The scope is a Zero Compromise ZC527 (5-27x56mm FFP) with MPCT2 reticle. Zero Compromise Optic is a relatively new manufacturer, but their scopes are top-flight. The First Focal Plane ZCO has excellent glass that is extremely bright and clear. With a big 36mm main tube, the ZC527 offers 35 Mils Elevation and 21 Mils Windage adjustment. The field of view is 21 feet at 100 yards — one of the widest in the industry. The ZC527 also offers illuminated reticle and locking turrets. When I was at my first PRS match I looked through several different scopes. When I got behind a ZCO scope I knew this was what I wanted — the ZCO scope was super clear, super sharp, with very positive controls.
I put a protective wrap on the scope because with some of our PRS stages it is easy to scratch or dent the scope tube. You don’t want to bang up an expensive scope — the ZC527 retails for $3760.
Reloading for 6mm Creedmoor and 6.5 Creedmoor
When starting out with a new cartridge I like to search places like AccurateShooter.com and UltimateReloder.com for popular recipes used by knowledgeable shooters. I am all about paving your own way on certain things but with the consistency, higher cost, and limited supply of components these days I try to stick with the most common loads. I also want to limit barrel wear and get through load development quickly. I don’t want to chase loads for 300 rounds to ultimately land in the same place that so many other people have already found.
I start my new barrels with virgin brass and load three rounds at each charge weight in 0.2 grain increments. I put the most popular charge weight (for my chosen bullet) in the middle of my load range and load above and below to find a good node while paying close attention for pressure signs along the way. I use the 6.5 Guys spreadsheet (see below) to help analyze my results. With those results I like to re-test a narrower range with 5-10 rounds each charge weight in 0.2 grain increments. I again use the 6.5 Guys spreadsheet to make a final charge weight selection and then I move on to seating depth. I will load different depths to tighten the groups up.
Load Development Using 6.5 Guys Custom Spreadsheet
To hold and analyze my load development data I use the spreadsheet from 65Guys.com. It helps a ton with making a decision on your final load. This Excel spreadsheet works great and makes it simple to analyze your data. You can even copy and paste your chronograph data if your chrono logs on to a SD card.
In this 6.5 Guys video Steve provides an overview and tutorial for using the Excel load development analysis model that he has developed. The Excel Load Development Analysis Spreadsheet version 2.0 is FREE. Download from the 6.5 Guys Website.
In this video Steve explains some key statistical concepts for performing load data analysis. He also provides tips and guidance for determining the optimal load for your rifle as you analyze the load data you’ve collected.
New House, New Man Cave/Reloading Room
Jeff recently moved with his family into a great new house. One bonus of this move was that he upgraded from a cramped reloading area to a dedicated “Man Cave” that has ample space for his gun safes, multiple presses, and all his reloading components. Large upper and lower cabinets plus a dedicated “gun closet” provide plenty of storage. Read all about this move in this AccurateShooter Forum Thread.
Here is Jeff’s first reloading area years ago: “My first reloading setup was smashed in my two-bedroom condo so I had a very small bench that was very cluttered. I had to deal with the limited space I had but I made it work. Then in our first house I had a larger bench/cabinet, but it was still not ideal.”
Here is the new Man Cave in the new house — very open, spacious, with plenty of storage.
This animated GIF shows the new Man Cave move-in process start to finish:
Right Click and “Save as” to download printable PDF versions of target.
Bullet Selection — With the .30-06 for my Garands and Springfields I stick mostly with 168gr bullets plus some 155-grainers. These bullet weights have just worked for me in the past. 
Powder Charge and Dispensing — I have always had good success with Hodgdon H4895 powder. My load has always been right around 47.0 grains, with both the 168gr and 155gr bullets. I also use the Auto-Trickler to drop all of my powder charges. This is a fantastic piece of equipment that not only gives super-consistent powder charges quickly, but it also makes one less thing that you have to worry about while on the firing line. With the Auto-Trickler, there is never a question about the powder charge in your ammo. As for primers, I have been shooting CCI 200 Large Rifle primers for many years and have never had an issue. 
+ONE Program to Encourage New Shooters
