Forum member 1LessDog calling in coyotes in a cold North Dakota winter landscape.
Forum member DNorton posted: “I live way up north where our white sandy beaches look like this!”
There is a nice thread in our Forum appropriately entitled “Winter Time”. You’ll find some great backcountry images taken by our Forum members. Winter is a special time in the outdoors. Forum member JDP explains: “Winter is the best time to shoot! One of the few of life’s ironies that works in my favor. The range is empty and barrels keep cool, no bugs, no waiting on people, no mirage. Yup, this world needs more thin blooded snow birds. This cool weather is terrible and dangerous, tell your friends! Do people get lonely while shooting or something? It’s the true holiday season in multiple ways.”
These two images come from Forum member Bill K on a winter varmint safari. He posted: “This was Varmint Shooter’s truck [showing the outside temperature] when we set up.” Brrrr… that’s cold.
The above photo is from Forum member 1LessDog, who posted: “The mound behind the Coyote is a Indian burial mound. There are six of them within a half mile of this one. I would really like to know how many coyotes I have shot off the mound. I would guess 4-5 a year over 35 years. It is one of my favorite spots to call from… any time I have a South to Southeast wind[.]”
Forum member Bojo posted images of his hunting trip in Northwestern Pennsylvania last week. Bojo wrote: “It was an early winter for us — temps from low 20s to mid 40s through a week’s swing. Our cold hits hard in January/February.”
Parting Shot — Some Folks Are Happier without Snow
While he acknowledged that these “white winter” photos are lovely to look at, Forum member D-4297 prefers warmer climes: “Just lookin at all those pictures of that white stuff makes me get chills. You hearty souls can keep it. I grew up in the ‘Snow-belt’ on the east side of Cleveland. Moved to Phoenix forty years ago, and don’t miss the snow at all. And nobody has tried to sell me a shovel or broom for keeping the sunshine off my driveway, either.”
For today’s Sunday GunDay story we showcase seven interesting metal-chassis rifles. While we love the look and feel of wood and fiberglass, metal does have its advantages. It can be crafted very straight and true, and the designs can achieve a very low center-of-gravity without sacrificing rigidity. In addition, a precisioned machined metal chassis tends to track extremely well.
Massive IBS Heavy Gun Milled from Solid Aluminum Billet
This remarkable 70-lb IBS Heavy Gun, was machined from solid aluminum billet, by Bruce Baer. It rests on a G&G Alvey rest split in the middle to comply with rules. This “heavy metal” CNC-machined wonder is a work of art designed for the 1000-yard game in the Heavy Gun class. Wood stocks, and to a lesser extent fiberglass stocks, are more forgiving, offering greater damping and recoil absorption. However, metal stocks offer superior rigidity, and the CNC machining allows tracking surfaces to be perfectly parallel.
Williamsport limits Heavy Guns to 100 pounds. Under IBS and NBRSA rules weight is unlimited. You will see a few massive 200-lb behemoths at IBS matches, but most competitors find that something in the 60-90 pound range works best. Bruce Baer explains, “You can’t stop a gun from recoiling. If it doesn’t recoil it will jump. If it jumps you might as well go home because you won’t shoot a good group. So it is pointless to try to build a gun so heavy as to eliminate all recoil. The more you restrict the rifle’s recoil the more temperamental that rifle will be. The 200-pounders just don’t out-perform something in the 60- to 80-pound range, and I think the optimal weight is 60-70 pounds.”
Bruce Baer likes the 70-lb overall weight for a heavy gun: “Extreme mass is not necessarily an advantage. Watch a locomotive starting up from zero–it will vibrate from one end to another. If the gun is too heavy I think it will vibrate at the start of recoil and that will kill accuracy. I want the gun to start from recoil with very little effort so it will be smooth from start to stop.”
Water-Cooled World Record-Setting Wondergun
We like “outside of the box” thinking. And in the world of competitive shooting, it can’t get more unconventional than this. But this radical liquid-cooled benchrest rig wasn’t just a crazy experiment — it actually delivered the goods. This IBS Heavy Gun, built by Joel Pendergraft, produced a superb 10-shot, 3.044″ group that stood as an International Benchrest Shooters (IBS) 1000-Yard Heavy Gun record for seven years, not being broken until 2016.
Using this water-cooled wondergun, Joel shot the record-breaking group in April 2009 at Hawks Ridge, NC. This monster features a .30-Caliber 12-twist, 4-groove Krieger barrel inside a water-filled sleeve (like on a liquid-cooled machine gun). Joel shot BIB 187gr flat-based bullets in Norma brass, pushed by a “generous amount” of Alliant Reloder 25 and Federal 210M primers. The cartridge was a big custom wildcat Joel listed as “.300 Ackley Improved”.
Pendergraft’s 3.044″ 10-shot group was a great feat, breaking one of the longest-standing, 1000-yard IBS World Records. And Joel’s 3.044″ record stood for 7 years!
Richard King’s Radical .223 Rem F-TR Skeleton Rifle
Here’s something exotic from our Gun of the Week archives. We like this rig because it is so radical (we doubt that you have ever seen anything quite like it). Gun-builder Richard King calls this his “Texas-T”, noting that “this is my personal gun, built the way I wanted it. I know it’s radical and some may not care for it. But it works.” The rig was designed to shoot F-TR, but it can also be converted easily to shoot F-Open with a front rest.
Richard reports: “This is pretty much an all-aluminum rifle. The action is a Kelbly F-Class with a Shilen stainless steel competition trigger. The scope is a 1″-tube Leupold 36X with a Tucker Conversion set in Jewell spherical bearing rings. The .223 barrel is 30″ Pac-Nor 3-groove, 1:6.5″-twist mounted in a V-type barrel block. The bipod has vertical adjustment only via a dovetail slide activated by a stick handle. It works like a joy-stick, but for vertical only. I adjust for windage by moving the rear sandbag.”
Richard likes how the barrel block works: “With the barrel block forward, the vibrations should be at a low frequency. Instead of one long rod whipping, I now have two short rods (barrel halves) being dampened. This is my fourth barrel block gun. They work, but so does a good pillar-bedded action. [This rifle] is designed for my style of shooting. It is not meant to be a universal ‘fit all’ for the general public. However, I will say the design is adaptable. I can easily convert the system to run in F-Open Class. I would drop a big-bore barreled action into the V-block, slide on a heavier pre-zeroed scope and rings, add plates on the sides up front to bring the width to 3″, and maybe a recoil pad.”
F1 F-Open Chassis from Competition Machine
Along with his famed tube-guns, Gary Eliseo of Competition Machine has designed a modern, low-profile chassis system for F-Open competition. Assembled with Cerakoted aluminum beams, these F1 F-Open chassis systems offer great tracking with an ultra-low center of gravity.
Here is the F1 Chassis with “Marine Corps Red” powder coat finish. Read Full Report.
This F1 aluminum alloy chassis stock features a super-low center of gravity, plus adjustable length of pull, cheek rest, and drop. The stock is available in a wide choice of Cerakote finishes. The current Model F1 chassis features a action block mounting system to fit most actions. There was also an earlier version that had a free-floated action with the barrel in a barrel block, secured with epoxy. Both F1 versions (action block and barrel block) shot great, with excellent performances in competition.
Gen 1 F1 F-Open Chassis System with Barrel Block
State Championship Win with Home-Built Aluminum Stock
While most of the stocks featured above were crafted by professionals, the properties of aluminum allow it to be used by persons with some basic mechanical skills and metal-working tools. Here’s proof. Back in 2009, Forum Member John Dunbar (aka JD12) crafted his own aluminum F-Open stock. And he used that impressive metal stock to win the Wisconsin State F-Class championship. READ Full Story.
The stock for John’s “home-built” .284 Winchester was mated with a Savage target action. John designed and fabricated the aluminum stock himself. It features a central barrel block clamping a 32″ Brux barrel. Get this — John completed the rifle only 5 days before the match: “I finished machining/assembly on Monday night, did load workup Wednesday and Thursday nights, loaded rounds Friday night, and headed to Lodi at 4:30 on Saturday morning.” John even made his own co-axial front rest (see below)
When Fiberglass Fails, Aluminum Stock Saves the Day
Australian Mark Fairbairn performed a “Quick Fix” during the 2018 Berger SW Nationals. Mark’s F-Open rifle, in a conventional fiberglass stock, was giving him random vertical during one yardage: “I had a bit of a problem with elevation — the stock was hitting somewhere [causing vertical]. I was X-X-X then a shot popped up in the 9 ring with no good reason. So I figured I better put a new stock on it. I got my old aluminium stock I brought from Australia and quickly adjusted it to fit on the Stolle.”
Right on the firing line berm Mark swapped his barreled action into the metal stock of his own design. The clock was ticking… but the story had a happy ending. For the next yardage Mark shot a brilliant 150-7X, not dropping a point. So the “Quick Fix” did the trick. As they say Down Under — “Good on Ya, Mate!”
Home-Built Aluminum Chassis with Innovative A-Arm Bipod
Here is another home-built rig featuring an aluminum chassis mated to a Savage barreled action via a forward-mounted barrel block. This rig was crafted by Forum member Patrick Lundy, who followed the maxim: “If you can’t buy it, then build it.”
Patrick Lundy was so impressed with a fellow shooter’s barrel-block rifle, that he build a similar match gun himself, complete with barrel block and aluminum chassis. Patrick was inspired by a metal stock belonging to Peter Gagne. But he added his own custom touches, including an innovative “A-Arm”-design bipod for shooting in F-TR class. The gun has been very successful in competition. READ FULL Report
Pat told us: “This new stock was a milestone in my shooting career — it was my very first attempt to build a stock. I wasn’t much of a wood worker but I did have a talent for building with metal. The stock was fabricated from 6061 T6 aluminum. With this gun I was able to shoot from a rest or a bipod.”
Pat crafted the bipod from aluminum tubing: “The bipod was a very rigid A-frame design with welded aluminum tubing. I added slippery feet under the pod skis to facilitate smoother recoil. I realized that a wide-stance bipod had to recoil the same on both sides or the group would string horizontally.” Here is the innovative “A-Arm” bipod that Pat Lundy built for his rifle.
Emil Praslick III is widely recognized as one of the greatest wind wizards on the planet — a master at identifying wind value and direction, and predicting wind cycles. As coach of the USAMU and top civilian teams, Emil has helped win many high-level championships. In the three videos we feature today, Emil, who works with Capstone Precision Group (Berger, Lapua, SK, Vihtavuori) and Team Applied Ballistics, explains how to determine wind direction and velocity using a variety of indicators. Praslick, now retired from the U.S. Army, was an 18-time National and 2-time World Champion coach with the USAMU.
Video ONE: Wind Theory Basics — Understanding “Wind Values”
In this video from UltimateReloader.com, Emil explains the basics of modern wind theory. To properly understand the effect of the wind you need to know both the velocity of the wind and its angle. The combination of those variables translates to the wind value. Emil also explains that the wind value may not be constant — it can cycle both in speed and velocity. Emil also explains some of the environmental conditions such as mirage that can reveal wind conditions.
Video TWO: Determining the Direction of the Wind
Key Point in Video — Find the Boil
Emil explains how to determine wind direction using optic. The method is to use spotting scope, riflescope, or binoculars to look for the “Boil” — the condition in mirage when the light waves rising straight up. The wind will generate that straight-up, vertical boil in your optics when it is blowing directly at you, or directly from your rear. To identify this, traverse your scope or optics until you see the boil running straight up. When you see that vertical boil, the direction your optic is pointing is aligned with the wind flow (either blowing towards you or from directly behind you).
Video THREE: The No Wind Zero Setting
In this second video, Emil defines the “No-Wind Zero”, and explains why competitive shooters must understand the no-wind zero and have their sights or optics set for a no-wind zero starting point before heading to a match. In order to hit your target, after determining wind speed and direction, says Emil, “you have to have your scope setting dialed to ‘no wind zero’ first.”
Coach of Champions — Emil Praslick III
SFC Emil Praslick III, (U.S. Army, retired) works with Berger Bullets and Applied Ballistics. Emil served as the Head Coach of the U.S. National Long Range Rifle Team and Head Coach of the USAMU for several years. Teams coached by Emil have won 33 Inter-Service Rifle Championships. On top of that, teams he coached set 18 National records and 2 World Records. Overall, in the role of coach, Praslick can be credited with the most team wins of any coach in U.S. Military history.
Most competitive shooters are pretty good about bore cleaning (some may even clean their bores too aggressively). However, we’ve found that many shooters neglect the chamber area and the bolt lug recesses. It’s too easy to clean the bore, slip out the guide rod and say “I’m done.” Sinclair Int’l explains why it’s important to clean the action interior: “Shooters use a lot of grease and oil on their bolts to reduce friction and to prevent wear[.] Unfortunately, both of these compounds attract grit, powder and primer residues. Cleaning your receiver is especially critical [with] custom actions where the fit between the action and bolt is held to very tight tolerances. Routine cleaning of the action will prevent unnecessary wear on the bolt body, locking lugs, and the action raceways/guide rails. Frequent action cleaning is also essential to keeping the trigger area free of debris which can cause trigger hang-ups and failures.”
Your rifle deserves a clean action and lug recesses. For action cleaning, our friend Danny Reever favors the PMA Action Cleaning tool. This handy tool speeds up the cleaning process, letting you do a better job in less time. Danny reports: “I’ve been using the PMA Action Cleaning Tool Kit for quite some time. Previously, I used one of the old style (round knob) action-cleaning tools with cylindrical cotton rolls. I think the PMA Action Cleaning Tool Kit is easier to use, and possibly achieves better results. Read Full Tool Review.
Cleaning the Chamber
Combustion by-products, lubricants, and solvent residues can collect in your chamber. Severe build-up of grease and carbon can interfere with chambering. Also some solvents will promote corrosion. You need to keep your chambers clean.
1) Install a clean cotton mop of the correct size on the end of a chamber rod and insert the mop into the chamber. Rotate the mop several times to remove any brush bristles left behind and any excess solvent that was between the rod guide snout and the end of the chamber. Make sure the chamber is dry. Prior to storing a rifle you can oil the chamber but make sure the oil is removed prior to firing the rifle.
2) Alternatively, install an old bore brush on a chamber rod, overlap a couple of patches on the brush bristles, and wrap them around the brush completely. Then insert the patch-covered brush into the chamber while rotating it to remove the excess solvent and debris. Push it firmly into the neck area of the chamber. A similar method is to pierce a large patch on the end of the brush loop and insert it into the action, again rotating the brush as you push the patch up against the breech.
Cleaning the Lug Recess Area
The action lug recess area is one of the dirtiest places on a bolt-action rifle. To properly clean this area, always use a tool designed for the task, such as the $29.99 Sinclair Action Cleaning Tool (part # ACT1) which is part of the full Sinclair Action Cleaning Tool Kit ($49.99, part #ACT2).
1) Insert a cotton roll or cleaning felt into your lug recess cleaning tool and wet both ends and the face of the cotton roll/felt with solvent.
2) Insert the tool into the action and push it forward until it is positioned fully in the lug recess area and rotate the tool head several times. Then reverse the rotation for another few turns. While rotating the tool move it slightly in and out to cover the entire recess area and to also clean the breech face.
3) Remove the tool from the action and inspect the surface of the felt or cotton roll. If there is quite a bit of residue on both sides of the felt/roll, then repeat with another wet felt/roll.
4) When you feel the recess area is completely clean, insert a dry cotton roll into the tool and rotate the tool head to remove any remaining solvent and debris. If necessary, use a second dry cotton roll.
5) You can follow this step up with another pass of a mop or patches into the chamber to get any debris or solvent that pushed forward out of the lug recess area.
The National Shooting Sports Foundation (NSSF) and fourteen firearm manufacturers, distributors, and retailers has filed a major lawsuit in Federal Court, NSSF et al vs. Letitia James (N.Y. Atty. General). This action seeks to overturn New York States “public nuisance” law which targets gun makers for the criminal misuse/unlawful possession of firearms in New York no matter where they were purchased. The plaintiffs also moved for a preliminary injunction challenging the misguided New York statute as unconstitutional.
The NSSF brought this legal action to “uphold the foundations of tort law, fight government overreach, and protect the firearm businesses that lawfully operate and employ over 340,000 Americans.” Along with the NSSF, the other 14 plaintiffs include: Beretta USA, Central TX Gun Works, Davidson’s, Glock, Hornady Mfg., Lipsey’s, Osage Co. Guns, RSR Group, Shedhorn Sports, SIG Sauer, Smith & Wesson, Sports South, Sprague’s Sports, and Sturm Ruger & Company.
The challenged law, signed by disgraced Democratic Party Governor Andrew Cuomo, allows civil lawsuits by municipalities, such as the city of New York, as well as the State of New York, against the firearm industry for the criminal actions by non-associated third parties. The “public nuisance” statute also permits private lawsuits by persons who have been harmed or threatened by criminals using firearms. Both New York State and the City of New York were part of a wave of similar lawsuits filed over twenty years ago that led to Congress passing the bipartisan PLCAA in 2005.
New York’s “public nuisance” law subjects firearm industry companies to civil lawsuits for the criminal misuse or unlawful possession of firearms in New York. The law would impose liability on industry members for firearms lawfully sold anywhere in the United States that end up being criminally misused or illegally possessed in New York thereby allegedly contributing to a “public nuisance” in the state. The NSSF lawsuit challenges the New York law as preempted by the Federal Protection of Lawful Commerce in Arms Act (PLCAA). It also challenges the law as unconstitutionally vague in violation of the Due Process Clause of the United States Constitution. The lawsuit further challenges the law as an impermissible attempt by New York State to regulate interstate commerce in violation of the Commerce Clause of the Constitution.
The NSSF states that “New York is trying to use the threat of crushing liability to coerce out-of-state businesses to adopt sales practices and procedures not required by Congress or the law of the state where they operate. The Constitution reserves the power to regulate interstate commerce solely to Congress.”
SilencerCo’s new Harvester EVO is a lightweight suppressor designed for hunters and precision shooters. Evolved from SilencerCo’s Harvester 300, the new Harvester EVO suppressor is notable for its compact size and VERY light weight. Constructed with cobalt-6, inconel and 17-4 heat treated stainless steel, the new EVO weighs just 10.8 ounces (0.675 pounds) and retails for $680.00.
The Harvester EVO can work with chamberings from .223 Rem up to .300 Win Mag. Consumer feedback on the previous Harvester models led SilencerCo engineers to make the EVO shorter, lighter, and more affordable. The smaller size makes the Harvester EVO less likely to get caught on bushes and brush in outdoor environments.
Weighing just 10.8 ounces, the Harvester EVO is one of the lightest rifle suppressors you can buy. The EVO’s low mass and smaller size “gives the EVO an edge over other hunting suppressors” said SilencerCo Senior Product Development Specialist, Dewie Vieira. CLICK HERE for Harvester EVO product details.
EVO Suppressor Product Specifications:
● Rated for calibers ranging from .223REM/5.56NATO to .300 WIN
● Tubeless, light-weight design
● Weighs 10.8 ounces
● Measures 6.24″ in length
● Constructed with cobalt-6, inconel and 17-4 heat treated stainless steel materials
● Ships with both a Bravo ½ x 28 and Bravo ⅝ x 24 Direct Thread Mount
Right now reloading presses are in high demand. If you are shopping for a single-stage press, here’s a good press you may still find available at many vendors. The Hornady Iron Press features a super-strong, pyramid-style cast-iron frame with an open front. A clever optional “automatic” priming system shuttles primers from a vertical tube in the back to the shell-holder in the front. This is very clever engineering. The Auto-Prime system is sold separately or as part of the Iron Press Reloading Kit.
The broad top of the beefy (26-lb.) Iron Press can hold case prep tools (such as chamfer tool and case-neck brush) and/or a box for bullets or brass. NOTE: This is NOT a turret press — you can only use one die at a time. However, Hornady offers an accessory “Die Caddy” (sold separately) that can hold up to three (3) more dies. That way you can quickly switch from a sizing die to a seater die (or vice-versa). What Hornady calls the “Accessory Mounting Deck” gives quick access to items such as trays for bullets or cases, chamfer and deburr tools, case neck brushes, primer pocket cleaners and other accessories. The Iron Press comes with the Lock-N-Load® bushing system which allows for rapid die changes.
Optional Auto Prime Shuttle Priming System
The optional auto-priming system is a real selling point for this press we think. When you move the press handle rearwards, a horizontal bar toggles back to pick up a primer from the column in the rear of the press. Then this same bar move forwards to place the fresh primer in the center of the shell-holder. Hornady explains: “The available gravity-fed Automatic Priming System (sold separately or with the Lock-N-Load® Iron Press Reloading Kit), combined with the Accessory Mounting Deck, increases reloading efficiency by allowing more processes to occur simultaneously. The Iron Press is the first of its kind to allow the ability to deprime, pause, and remove the case to chamfer & deburr … then replace and prime.” This video shows how to install and operate the Auto Prime system.
Video Shows Set-up and Operation of Gravity-Fed Shuttle Priming System:
In these days of Smart Phones, WiFi-equipped cars, and Alexa digital assistants, conventional books may seem old-fashioned. But for presenting a wide range of information, with charts, tables, photos, and a handy index, there is much to be said for conventional paper publications. These can be used anywhere and anytime, even where there is no cell service. You can annotate the pages with your own comments, and make simple, manual bookmarks for your most-used pages.
One resource we use regularly is the Cartridge Comparison Guide V2, a remarkably comprehensive 340-page spiral-bound book. Covering over 250 cartridges, the 2nd Edition of the Cartridge Comparison Guide covers most available factory cartridges from .17 caliber all the way up to .50 caliber. This resource also compiles cartridge data from major manufacturers Barnes, Federal, Hornady, Norma, Nosler, Remington, Sierra, Swift, Weatherby, and Winchester. If you shoot factory ammo, you should definitely get the Cartridge Comparison Guide.
Shooters building a resource library have many good choices. Creedmoor Sports has a large collection of books in stock, with many on sale. On Creedmoor’s Book/Video page, you’ll find dozens of printed books. You can search by format, author, price, and date. In addition, while you’re visiting Creedmoor Sports, you’ll find many tools and shooting accessories on sale.
Here Are Nine of Creedmoor Sports’ Most Popular Book Titles:
Shooting Sports Crossword Puzzle Book
Here’s an interesting book for gun owners. Get away from the TV and test your skills on these gun-centric crossword puzzles. The Shooters Book uses terms and names relating to firearms, their use, and development. At 178 pages, this crossword puzzle/word search book offers something for all firearm enthusiasts. Each crossword puzzle has correlated word searches included to help solve it.
NOTE: The contest is OVER, so ignore information on the PDF about submitting targets — that’s from back in 2013.
Here’s a target for the holidays that can provide some fun at the range. This Christmas Tree Target was created by Sierra Bullets for a 2013 contest. This contest is now over, but you can still have fun with the target. This tree target is designed to be shot at 15 yards with pistol, or at 100 yards with rifle.
Santa’s Extra Accuracy Challenge
Start with the big circles, and then work your way down to the small circles (7,8,9,10) as you build your confidence. Shoot the gifts for bonus points.
For an extra challenge (with an accurate rifle), try working your way back up to the top, aiming for the X-Marks in the circles and finishing with the small, inset star at the top. Try to hit each X-Mark and then put your final shot in the inner star. Have fun!
Katrina Demerle, 17, of Hamilton, Ohio, is a living legend of the Civilian Marksmanship Program’s (CMP) Gary Anderson Invitational. Katrina has now claimed four straight overall wins in the junior air rifle event in 2018, 2019, 2020, and 2021. That’s four straight titles for the talented Katrina. And she could make it five in 2022: “I will be back to try to win again next year!”.
Over 340 athletes competed in the 2021 match, held annually at the 80-point electronic air gun ranges at the CMP Competition Centers at Camp Perry, Ohio and Anniston, Alabama. This is a three-position (3P) match with shooters firing from prone, standing. and kneeling positions.
Last year, Demerle fired a national Precision Individual 3×20 plus Final record score of 701.4 using her Pardini GPR1. Shooting 700.6 overall this year with the same Pardini air rifle (which she named “Giorgio”), Katrina took top spot in the precision category. “There was a little bit of added pressure [this year] since I wanted to have another consecutive win and also wanted to beat my national record from last year.”
Competing in nearly 400 matches since 2014, the talented young athlete is a member of the USA Shooting National Junior Team for both international and three-position air rifle. Before the GAI, she had already recorded a memorable year — earning second at the Junior Olympic 3P National Championships and the overall top score at the CMP 3P National Championships, becoming the overall winner at the Junior World Championship in Lima, Peru, and winning the Junior Air Rifle National Championship in international air rifle. And the talented Ms. Eberle currently holds six national records in total.
Katrinia has nicknamed her Pardini GPR1 Air Rifle “Georgio”: CLICK HERE for large Pardini GPR1 photo.
Finishing second behind Demerle in the precision individual competition was Isabella Baldwin, 17, of Nashville, Tennessee, with a score of 697.8. Gracie Dinh, 15, of Starkville, Mississippi, fired 693.9 for third.
One resource we use regularly is the 
Santa’s Extra Accuracy Challenge
