Do you have trouble seeing your bullet holes (on paper) when shooting past 400 yards? That’s a common issue even with premium ($1600+) high-magnification scopes. Here’s a target that solves that problem. A hit creates a larger black circle that’s much more visible than a plain bullet hole, making this target ideal for use at longer range (500 yards and beyond).
The 12″ square Birchwood Casey white background Sight-In Target displays a black “halo” around each hit (like the yellow circle on a conventional Shoot-N-C). Larger than bullet diameter, the “halos” can be easily seen with a high-magnification scope at long range (see video below). The self-adhesive target features four diamonds with contrasting red box centers. For precise aiming, you can position your cross-hairs to align with the corners of the boxes. Or, you can put a target dot sticker in the middle.
This video shows Black Shot Halos on white background:
While we envision using this target with optics at long range, Birchwood Casey says that open sights show up well against the white background, making these targets well-suited for indoor ranges or use in low light conditions.
This white background grid target has five aiming points and a 1-inch grid overlay for quick and easy sight adjustments. It comes with target pasters that allow shooters to cover up bullet holes and continue using the target for added value. The White/Black Shoot-N-C 12″ Sight-In Targets come in 5-packs with 75 target pasters for $7.19 from MidwayUSA or $8.09 on Amazon.
High-Viz Option — Yellow on Black Grid with Yellow Halos
If you prefer seeing ultra-high-contrast yellow/green “halos” for your hits, Birchwood Casey also makes adhesive grid targets with five yellow-edged diamonds. Red circles provide precise aiming points in the middle of each box. You can quickly estimate group size or dial-in your zero using the hi-viz yellow 1″ grid lines. These yellow-on-black targets are available in three sizes: 8″ square, 12″ square, and 17.5″ square. These yellow-on-black grid targets start at $4.95 for an 8″ six-pack.
What’s wrong (or right?) with this picture? Does the “F” in F-class refer to “Fauna”? Look carefully at this Bisley Range photo taken by Australian R. Hurley while looking downrange through his March 8-80X scope. The photo was taken in 2015 at the Bisley National Shooting Centre in the UK.
The Story Behind the Photo
British shooter T. Stewart reports: “I was there when this photos was taken. All I can say was that Mr. Hurley was firmly reminded that should said deer accidentally jump in front of his bullet … he would spend five years ‘At Her Majesty’s Pleasure’.”
“That morning we had five deer moving across the targets, literally blocking the V-Bull. Since we were on the 900-yard Firing Point, and elevated for such, obviously the bullet would pass well above them. But they do NOT move or flinch at the noise or passing bullets since they are not hunted on the Bisley Ranges. Earlier this year we saw a herd of 20 or so deer grazing slowly across the Range.”
More Fauna Findings…
Apparently Bisley is not the only place were “the deer and the antelope play”. In Canada, on the Connaught Ranges near Ottawa, Ontario, shooters often encounter a variety of wildlife. William McDonald from Ontario says: “Animals are a common sight on the Range. Along with deer we see geese, turkeys, and coyotes on a daily basis.”
Likewise, E. Goodacre from Queensland, Australia often sees ‘Roos on his home range: “I shoot at Ripley, Australia, and shooting is regularly interrupted by kangaroos. Our last silhouette match was delayed by an hour while 30 ‘Roos dawdled across — silly buggers!”
R. Hurley wasn’t the first fellow to view deer through his F-Class rifle’s scope. After seeing Hurley’s photo from Bisley, B. Weeks posted this image, saying: “Been there, done that!”
How have gun sales grown in recent years in the USA? What states have the most new gun owners? How much ammo is produced each year? You’ll find answers to these and other questions in a new infographic produced by Bear Creek Arsenal.
Here Are Some of the Key Findings:
1. Over 21 million NICS Adjusted background checks were done in 2020, a 59.7% increase over 2019 (and 34.3% higher than 2016). NSSF estimates that 40% of 2020 gun sales were to first-time gun buyers who numbered 8.4 million last year.
2. Of all U.S. States, Texas had the most NICS checks in 2020, with 1.8 million, followed by Florida with 1.6 million. Perhaps surprisingly, Democratic Party-controlled California recorded 1.23 million NICS checks.
3. Some “Blue States” have seen huge increases in gun sales, prompted by Leftist- and BLM-sponsored riots and social unrest. For example, Michigan saw a 180% increase in sales, while the District of Columbia saw a 140% increase. That is interesting because DC is definitely not a bastion of conservative Republicans. In fact, the District of Columbia is solid Democratic Party territory. This shows that concerns over personal safety/self-defense cut across party lines.
4. Over NINE BILLION rounds of ammunition were produced in 2020. This represents a total annual ammo value of $21.38 billion. Quote: “A reasonable extrapolation puts the amount of ammunition produced for the United States market [in 2020] at somewhat over 9 billion rounds, of which 5 billion are rimfire and 4 billion are centerfire rifle, pistol, and shotgun rounds.” Source: Dean Weingarten on Ammoland.com
2020 was definitely the year of the gun. Firearm sales were up 95% in the first half of 2020. And, according to the NSSF, there were nearly 8.4 million first-time-ever gun buyers in the USA in 2020. A NSSF dealer survey estimates that 40% of all gun sales were conducted to purchasers who have never previously owned a firearm. Women accounted for 40.2% of all first-time gun purchases. Notably, firearm purchases among African American men and women increased 58% over last year, the largest such increase of any demographic group.
Looking for a faster, easier, and more accurate way to measure bullet positions on your loaded rounds? Check out the Accuracy One Seating Depth Comparator. This unique tool provides a shoulder-to-ogive measurement instead of the traditional cartridge base-to-ogive measurement. The Accuracy One Comparator just might work for you. This unique tool allows a very rapid and secure measurement that provides a precise determination of the bullet seating depth in the case.
Accuracy One Seating Depth Comparator
Product Review by F-Class John
You probably check your loaded ammo by measuring cartridge base to ogive, but have you ever considered there may be a better way? Curt at Accuracy One has considered the question, and after exhaustive research and testing he created the Accuracy One Seating Depth Comparator. As opposed to looking for a base to ogive measurement, this tool measures from the shoulder to ogive, which is arguably the more repeatable number when it comes to accuracy.
Click Arrow to Watch Video Tool Review
As Curt explains, “Well, when you fire a chambered cartridge, the strike from the firing pin first pushes the cartridge forward until it bottoms against the shoulder. The primer is then ignited. What this means is that your seated bullet depth consistency can more accurately be gauged using the dimension from shoulder to ogive. Using this dimension, you effectively eliminate any small variances in your sized case length from the equation”. As a result, it made sense that when he was designing the measurement tool his goal was to create a universal insert that allowed a user a quick, easy, accurate and repeatable process that measures from mid-shoulder to ogive.
The comparator fits cartridges from .22 to .30 Caliber with 0.400″ and larger shoulder diameters. The tool fits so many bullet sizes because of the specific taper that Curt developed. This ensures that any caliber in that range makes good contact along the ogive. As I used this tool and talked to people about it, I kept getting skeptical comments with people asking how it could measure the ogive on that many calibers accurately. I had to remind them that the ogive is not a single point on the bullet but in fact the entire curve from the tip of the bullet to the point it straightens out. As a result, it’s only important that the tool you use is consistent in what point along the ogive it measures and that’s where the Accuracy One Seating Depth Comparator shines. According to Curt, he went through countless iterations on his design until he was able to accurately and repeatably measure all those calibers (.22 to .30).
How to Use the Accuracy One Seating Depth Comparator
Using the comparator is simple. There are alternative methods. The easiest way is to simply zero the indicator, insert a loaded round, note the measurement and compare any future rounds against it for variation. An alternative to this is a method I use. I insert a loaded round and then zero the indicator. This allows you to see the exact variation without mental math (and frankly it’s faster this way). I also use this method to sort loaded rounds for matches in order from shortest to longest ensuring that rounds that measure the same are fired together.
Bonus Option — Measuring Length to Lands with Tool
Another great use for this Accuracy One comparator is to take my initial depth to lands. This helps ensure my seating depth was properly set. Using a case with very light neck tension, I load a bullet, and with a stripped bolt I load and close it. Then I can remove the round and take a measurement, zero the indicator and make a note of it in my book. After that the comparator will remember the new zero until it’s zeroed again and if that happens by accident, I can always reference the number that my round measured and pull on the indicator stem until that number is found and then zero it again. I found this entire process fast, easy and repeatable as I loaded rounds and needed to check for any seating depth variance.
Tool Pricing:
Seating Depth Comparator without Indicator: $65.00
Seating Depth Comparator with Indicator: $115.00
Gauge Stand: $47.00
Purchase Options
You can buy the tool with or without an Digital Indicator. Accuracy One also makes a Primer Depth Gauge. Both Accuracy One tools employ the same digital indicator. This helps save money as you can order the comparator alone if you already have one (either from another Accuracy Tool or another tool).
The Accuracy One Seating Depth Comparator is essentially the same size as the Accuracy One Primer Depth Gauge, so you can even utilize Accuracy One’s primer gauge storage case. There is also an optional stand that I HIGHLY RECOMMEND as it can hold either the seating depth OR primer gauge, making for amazingly simple one-handed operation while you’re loading.
CONCLUSION — Tool Is Precise, Repeatable, and Fast
Overall, this tool left me feeling confident in my depth setting and I found it quick and easy compared to past methods. At the end of the day there are several ways to skin the proverbial cat when it comes to measuring seating depth. But if you’re looking for what just might be the most accurate, consistent and speediest method, give the Accuracy One Seating Depth Comparator a try.
Good news for big bore revolver fans. Colt is bringing back its legendary Anaconda .44 Magnum Revolver. Colt has released this big-bore wheelgun for 2021, and both 6″ and 8″ barrel models are now leaving Colt’s factory. These new-generation Colts are hefty. Fitted with 6″ barrel Colt’s new Anaconda weighs 3.31 pounds (53 ounces) while the big 8″-bbl Anaconda tips the scales at 3.69 pounds (59 ounces).
Guns American Digest reports: “Now in production and starting to ship, the Anaconda is returning in both 6-inch and 8-inch models. The .44 is based on Colt’s updated .357 Magnum design, scaled up and reinforced for the hard-hitting cartridge. Of course, shooters can always shoot friendlier .44 Special ammunition at the range. These guns are returning with all the same looks as the originals, with full-length underlugs, ventilated rib topstraps, and Colt’s semi-bright polished finish. They ship with target sights including adjustable rear sights and a red ramp up-front.”
The Colt Anaconda is a double-action six shooter with forged stainless steel barrel and frame. Double Action trigger pull is 12 pounds with single action a smooth 5 pounds. The new Anacondas come standard with black Hogue over-molded rubber grips, but Python checkered wood grips can be fitted to Anacondas. For full-power .44 magnum loads, we recommend sticking with the Hogues.
Optics Options for Anaconda
Are you a handgun hunter? Then you’ll be pleased to note that the new Anaconda comes with frames already drilled and tapped for optics. This will allow the fitting of red-dot style optics as well as long-eye-relief hunting scopes.
Additional Calibers in the Future?
Will the Anaconda be offered in other calibers? Guns America Digest reports: “It’s possible that Colt also has plans for other chamberings, like .45 Colt, but for now, they’ll have no trouble finding buyers for their new-production .44 Magnum Anacondas. Even at the suggested retail pricing, which, in all fairness, is the same as the .357 Magnum Pythons.
Colt Anaconda MSRP is $1499.99
The 2021 Colt Anaconda is listed on the Colt website with a hefty $1499.00 MSRP, the same as the new-generation Colt Python Revolver in .357 Magnum.
This Armalite AR-50A1 .50 BMG rifle was modified by G.A. Precision.
If you’re a fan of big boomers, and love shooting steel, then definitely watch this Wide Open Magazine video. This covers a .50 BMG build by our friends at G.A. Precision (GAP). The rifle started as an Armalite AR-50A1 ($3359.00 MSRP). Then GAP fluted the barrel and swapped the factory muzzle brake with a more compact brake from American Precision Arms*. Then, as modified, the entire rig was given a rugged Cerakote finish.
The video has nice background music, great aerial drone footage, and of course some serious firepower. Using Hornady .50 BMG ammo, GA Precision’s George Gardner and his Wide Open friends shoot the big Fifty from the bench as well as prone. Enjoy!
About the .50 BMG Cartridge
The .50 Browning Machine Gun (.50 BMG, aka 12.7×99mm NATO or 50 Browning) is a cartridge developed for the Browning .50 caliber machine gun in the late 1910s, entering official service in 1921. Under STANAG 4383, it is a standard cartridge for NATO forces as well as many non-NATO countries.
John Browning had the idea for this round during World War I in response to a need for an anti-aircraft weapon, based on a scaled-up .30-06 Springfield design, used in a machine gun based on a scaled-up M1919/M1917 design that Browning had initially developed around 1900. According to the American Rifleman: “The Browning .50 originated in the Great War. American interest in an armor-piercing cartridge was influenced by the marginal French 11 mm design, prompting U.S. Army Ordnance officers to consult Browning. They wanted a heavy projectile at 2700 FPS, but the ammunition did not exist. Browning pondered the situation and, according to his son John, replied, ‘Well, the cartridge sounds pretty good to start. You make up some cartridges and we’ll do some shooting’.”
* In the video, George mistakenly says “American Patriot Arms”, but the brake is made by Georgia-based American Precision Arms.
We are re-publishing this article at the request of Forum members who found the information very valuable. If you haven’t read this Safety Tip before, take a moment to learn how you can inspect your fired brass to determine if there may be a potential for case separation. A case separation can be dangerous, potentially causing serious injury.
On the respected Riflemans’ Journal blog there was an excellent article about Cartridge Case-Head Separation. In this important article, Journal Editor GS Arizona examined the causes of this serious problem and explained the ways you can inspect your brass to minimize the risk of a case-head separation. As cases get fired multiple times and then resized during reloading, the cases can stretch. Typically, there is a point in the lower section of the case where the case-walls thin out. This is your “danger zone” and you need to watch for tell-tale signs of weakening.
The photo below shows a case sectioned so that you can see where the case wall becomes thinner near the web. You can see a little arrow into the soot inside the case pointing to the thinned area. This case hadn’t split yet, but it most likely would do so after one or two more firings.
Paper Clip Hack for Detecting Problems
The article provided a great, easy tip for detecting potential problems. You can use a bent paper clip to detect potential case wall problems. Slide the paper clip inside your case to check for thin spots. GS Arizona explains: “This simple little tool (bent paper clip) will let you check the inside of cases before you reload them. The thin spot will be immediately apparent as you run the clip up the inside of the case. If you’re seeing a shiny line on the outside and the clip is really hitting a thin spot inside, it’s time to retire the case. If you do this every time you reload, on at least 15% of your cases, you’ll develop a good feel for what the thin spot feels like and how it gets worse as the case is reloaded more times. And if you’re loading the night before a match and feel pressured for time — don’t skip this step!”
Now here is an example of truly impressive marksmanship skills and amazing aiming from a USAMU soldier. From a standing position, SPC Ivan Roe shoots a tiny aspirin pill off the top of a balloon — without breaking the balloon. In fact, he does this twice … with iron sights no less.
Watch Video to See Aspirin Pill Shot Twice off Balloon:
The first time the pill sits on a small piece of tape just millimeters above the upper edge of the balloon (Time mark 00:40-45). But the second time, the aspirin pill lies flat on the top on the balloon — an even tougher challenge. Watch Ivan nail that flat pill again without hitting the balloon at 00:59. No that is truly impressive — and remember it was done from standing with Iron sights!
SPC Ivan Roe was using a German Feinwerkbau, an elite precision air rifle favored by Olympic and World Cup competitors. Originally from Montana, SPC Roe is a member of the USAMU International Rifle Team.
Did you like this demonstration of Trick-Shot marksmanship? Then visit the USAMU’s Facebook Page. Every Tuesday the USAMU releases a new trick-shot video on Facebook and YouTube. CLICK HERE for the latest USAMU trick-shot video — hitting a poker chip on a fast-moving target frame with a pistol. Very impressive.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Sportsman’s Warehouse — Savage Axis II Precision, $779.99
⏺ Compares well with tactical rigs costing much more
Here’s a smart choice for PRS/NRL Factory Class. Get the Savage Axis II Precision rifle in 6.5 Creedmoor for just $779.99. Add a high-quality scope and you’ll have a complete set up for well under $2K with money left over for bipod, support bags, and other accessories. If you are looking for a metal chassis varmint rifle, Sportsman’s Warehouse also has a .223 Rem Axis II Precision on sale for the same $779.99 price.
2. EuroOptic — Trijicon Tenmile Scope Sale — Huge Savings
⏺ These Trijicon optics compare well with NF for much less
Trijicon Tenmile scopes have quickly become popular with F-Class, PRS, and ELR competitors. Check out the Trijicon Tenmile scope sale where you can pick up any of these innovative scopes that feature lit reticles, large 34mm diameter tubes, and many other good features. These are really good scopes for the money. And now’s the time to buy with massive discounts during this sale. For example the Tenmile 3-18x44mm FFP with MRAD ranging is marked down from $2199.99 to $1475.99 (Save $724). And the Tenmile 5-50x56mm Extreme LR SFP scope is marked down from $2700.99 MSRP to $1810.99 — Save $890!
3. Brownells — KRG Bravo Chassis Rem 700, $329.99 with Code
⏺ Versatile internal frame stock for PRS or hunting — tan, black, or green
The Kinetic Research Group (KRG) Rem 700 Bravo Chassis is a good dual-purpose choice for PRS and hunting. This chassis features an internal aluminum frame with polymer exterior in Flat Dark Earth, Sako Green, or Black. The stock fits Rem 700 and Rem clone actions, accepts AICS-pattern mags, and is M-LOK compatible. The 2.9-lb KRG Bravo chassis features adjustable cheek riser and length-of-pull, built-in thumb shelf, plus quick-detach sling-swivel and bipod mounts. The KRG Bravo stock costs $349.99 at Brownells. You can also get $20 Off with Brownells code VTJ, lowering the net cost to $329.99.
4. Walker’s Electronic Muffs — Alpha or Razor Slim from $39.99
Walker’s makes some of the best budget-priced electronic muffs you can buy. Choose the 26 NRR Alpha Power model, now $39.99 on sale at MidwayUSA (50% Off), or try the lighter-weight 23 NRR Razor Slim model starting at $36.47, an Amazon best seller. These muffs have earned strong user reviews. One purchaser who also owns the Howard Leight Impact Muffs said the Walkers are far more comfortable: “Walkers: Deep cups with thick pads, does not press down on safety glasses. Comfortable even after 20+ minutes. Howard Leights: Thin pads, difficult to get them to sit right over your ear and eye protection with no air leakage. Uncomfortable on the ear … your ear contacts the felt inside the earmuff[.]”
5. Amazon — Teslong Borescope $45.99 or Rigid Version $69.98
⏺ Teslong borescopes are game-changers — true “must-have” tool
The Teslong digital borescope has been a huge success. This compact, electro-optical, cable-type borescope outputs sharp, high-resolution images and VIDEO to desktop computers and laptops, and many tablets. Check out our Full Teslong Review complete with inside-the-barrel videos. Get the basic version for $45.99 on Amazon or the rigid version Teslong Borescope for $69.98 (SEE Rigid Teslong Video). If you scope your barrels often, you’ll probably prefer the rigid version which is easy to insert and rotate.
6. MidwayUSA — Frankford Arsenal Hand Deprimer Tool, $35.99
⏺ Deprime fired cartridge brass anywhere — no press needed
Decapping brass can be a tedious, time-consuming, and messy chore. Simplify the task (and avoid messing up your reloading area) with the Frankford Arsenal Platinum Series Hand Deprimer Tool. This device lets you remove spent primers anywhere — no press needed and all the mess (cups/anvils/residue) stays in the capture chamber. You can deprime cases while watching TV. This tool features a Universal Collet that works with all case types. With good leverage, this tool is easy on the hands too. Forum members have praised this handy tool.
7. Amazon — MTM Cleaning Rod Case, $19.99
⏺ Good way to transport and store cleaning rods — lowest price ever
Good cleaning rods are expensive and can be easily damaged if you’re not careful. To protect those valuable cleaning rods, we recommend the MTM Cleaning Rod Case which holds four rods as well as cleaning supplies. This $19.99 case protects your rods both at home and while traveling. With this handy, durable case you can stop worrying about bending or breaking those important cleaning rods. This is a good price for a very popular item.
8. Amazon — Long Range Shooting Handbook, $19.85
⏺ Most Popular Practical LR Training Book, Respected Author
Ryan Cleckner’s Long Range Shooting Handbook is the best-selling modern book on practical rifle skills. Ryan Cleckner’s Long Range Shooting Handbook is designed as an intro to important fundamental concepts such as MOA vs. Mils, External Ballistics, and Environmental Effects. Included are personal tips and advice based on Cleckner’s years of experience as a sniper instructor and special operations sniper. You can view Sample Chapters on Amazon.com.
The Long Range Shooting Handbook is divided into three main categories: What It Is/How It Works, Fundamentals, and How to Use It. “What It Is/How It Works” covers equipment, terminology, and basic principles. “Fundamentals” covers the theory of long range shooting. “How to Use It” gives practical advice on implementing what you’ve learned, so you can progress as a skilled, long range shooter.
9. Midsouth — Tumbler Kit Pro with Separator/Sorter, $89.99
⏺ Ample capacity, great reviews, and good value right now
Keeping your brass clean is one of the best ways to keep your dies (and reloading presses) clean as well. If you’re looking for a new, affordable setup to clean cartridge brass, consider the Frankford Arsenal Quick-N-EZ Case Tumbler Master Kit. You get everything needed to dry-tumble your brass and remove the media. This is all available now for a very low $89.99, including Media and Brass Polish. The Tumbler Kit Pro will handle 600-1000 handgun cases, or 250-450 rifle cases (depending on size). Verified purchaser reviews have all been five stars.
10. Amazon — Howard Leight MAX Earplugs, $8.90/50 Pairs
20 Pairs
50 Pairs
⏺ Best NRR (33 dB), Very Comfortable, Great Value
These Howard Leight NRR 33 Max Plugs are your Editor’s favorite foam earplugs. Between shooting, motorcycling, and mowing lawns, I probably have Max plugs in my ears 2-3 days a week. This is a very good price for a bulk pack of 50 pairs. NRR 33 is the best Noise Reduction Rating you’ll find for plugs alone. And if you act soon, you can get free shipping to boot.
Over the past six days the Civilian Marksmanship Program (CMP) conducted a major spring shooting event — the Talladega Spring Classic held at the Talladega Marksmanship Park in Alabama. This year’s event was a success, with participants enjoying a wide range of pistol and rifle competitions, plus training courses.
TALLADEGA SPRING CLASSIC 2021
Spring has sprung! From March 16 through 21, the CMP has hosted a major series of rifle and pistol matches at the CMP Talladega Marksmanship Park in Alabama. The March 2021 Spring Classic event at Talladega included a mix of both new and traditional rifle matches, along with pistol competitions, and a variety of training courses.
On the rifle firing lines were Service Rifles, Vintage Military Rifles, and Rimfire Sporter Rifles. And there were even M1 Garands being shot from the bench. In the pistol areas, both rimfire and centerfire matches were held.
Spring Classic Featured New Benchrest Garand Match
The Talladega Spring Classic featured traditional matches plus some notable new events. Debuting this year was a Benchrest Garand Match. In addition there was a new Mid-Range 3×600 Rifle Match, and new Pistol 2700 Match. Along with the new events, the Spring Classic including CMP staple events including: Rimfire Sporter Rifle Match, .22 Rimfire Pistol EIC, Service Pistol EIC, and GSMM (Garand/Springfield/Vintage and Modern Military) Rifle matches.
There were also multiple training sessions including: Long Range Rifle Clinic, Team CMP 600-Yard Clinic, Rifle Marksmanship 101 Course/M16 Match, and Pistol Marksmanship 101 Course/M9 Match. These classes allow participants the opportunity to learn marksmanship from skilled, certified instructors.
While we envision using this target with optics at long range, Birchwood Casey says that open sights show up well against the white background, making these targets well-suited for indoor ranges or use in low light conditions.
Purchase Options
On the respected Riflemans’ Journal blog there was an excellent article about Cartridge Case-Head Separation. In this important article, Journal Editor GS Arizona examined the causes of this serious problem and explained the ways you can inspect your brass to minimize the risk of a case-head separation. As cases get fired multiple times and then resized during reloading, the cases can stretch. Typically, there is a point in the lower section of the case where the case-walls thin out. This is your “danger zone” and you need to watch for tell-tale signs of weakening.
TALLADEGA SPRING CLASSIC 2021
