Here’s a radical new rifle. Instead of a vertical trigger that moves rearward when pulled by the index finger, this Blackwater T.O.R. A1 rifle has a lever INSIDE the lower receiver. That lever is moved by the operator’s THUMB, causing the rifle to fire. The claimed benefits of the “thumb-gun” are: 1) Improved Ergonomics (thumb stays in alignment with point of aim); 2) Better Mechanics (thumb is strongest digit and can manipulate lever easily); 3) Enhanced Safety (trigger blade/lever is not exposed).
This AR-type rifle was developed by Iron Horse, now partnered with Blackwater Worldwide. The new T.O.R. (aka “Thumb Operated Receiver”) A1 is the industry’s first AR-platform rifle incorporating patent-pending, lever-driven fire technology.
Iron Horse A1 Precision Rifle
The manufacturer has made some interesting claims about this new thumb-lever system. Blackwater/Iron Horse claims that “Multiple samples of users show a shorter learning curve and reduced shot group size”, and that the design “lends to greater accuracy in precision shooting… with its inherent natural ergonomics.” One claim we do believe, is that the thumb lever may help disabled shooters. Additionally the manufacturer notes that because the “trigger guard completely encases the trigger” there is less chance of snagging the trigger in brush or vegetation.
How the Lever Trigger Works
The operator’s thumb goes into a port in the top of the polymer grip (see grip photo above). This allows ambidextrous firing by right- or left-handed shooters. The thumb points forward, in line with the barrel. The lever itself is contained INSIDE the lower. Watch this video to see how it works:
Is the Thumb Lever a Game-Changer?
“Ironhorse’s revolutionary trigger system has the potential to be a game changer” states Eric Prince, Founder of Blackwater Worldwide. “Our in-house testing has shown a significant decrease in shot group size when compared to a traditional AR-15 trigger set. We think this technology … could replace traditional triggers altogether at some point.” The manufacturer states that the thumb-operated trigger “has been shown to greatly enhance the experience of a large portion of the shooting community and makes shooting possible for those who have limited mobility or severely injured fingers.”
About Iron Horse and Blackwater Worldwide Iron Horse Firearms, based in Salt Lake City, Utah, was founded by a former U.S. Marine Ryan McDonald. The Patent-Pending Thumb-Operated Receiver was first developed in August of 2016 and became a fully operational system in the fall of 2018. Moving forward, Iron Horse Firearms will be doing business as part of Blackwater Worldwide.
In 2019, Blackwater Worldwide re-entered the firearms and ammunition market in the United States. In its first year of operation, it has acquired or developed multiple firearms lines and a proprietary ammunition line. The company is headquartered in Concord, NC.
Article based on report from Montana Shooting Sports Association.
Some states with anti-gun leadership are aggressively trying to eliminate insurance programs that help protect gun owners who may be forced to use a gun in self-defense. These liberal-controlled states claim they can block such self-defense insurance coverage because insurance is not allowed for an “illegal activity”. Interesting theory — since when did self-defense become illegal? The right of armed self-protection is enshrined in the U.S. Constitution.
Most states have a position titled “Insurance Commissioner”, a public official (usually elected) who regulates insurance matters. We are seeing harsh anti-gun policies being pushed through by State Insurance Commissioners, often as the behest of Democratic-party Governors or Legislative leaders.
For example, in Washington State, the Office of Insurance Commissioner (OIC) sent cease and desist letters to the NRA (regarding previously offered Carry Guard*), the United States Concealed Carry Association (USCCA), the Armed Citizen Legal Defense Network, U.S. Law Shield, Firearms Legal Protection, and CCW Safe, demanding that all quit doing business in Washington State. California’s Insurance Commissioner blocked NRA Carry Guard Insurance, and the same thing is likely to happen in other states in the months ahead…
Gary Marbut, President of the Montana Shooting Sports Association, says that citizens need to be concerned with state candidates for Insurance Commissioner (or equivalent state official): “In Montana, the function of an insurance commissioner is performed by the State Auditor, an elected position most people don’t think about much. Because of the attack on self-defense insurance in other states, the race for State Auditor is worth paying attention to in Montana. As voters, you and your friends should know which candidates pledge that self-defense insurance will NOT be targeted for eradication in Montana.”
That advice should be headed by citizens in other states as well. With so many attacks on Second Amendment rights from liberal politicians (and the mainstream news media), we don’t want state insurance rules to be used to disarm law-abiding citizens, or subject them to increased risk of lawsuits.
*The NRA’s Carry Guard Insurance program is no longer offered. Cancellation of this program is due largely to aggressive actions by State Insurance Commissioners in blue states such as California, New York, and Washington.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
This is a great deal — you can buy this Weatherby Vanguard Modular Rifle in 6.5 Creedmoor for just $799.99 on sale. That’s less than you’d pay for most custom actions by themselves. Yes this Weatherby rifle qualifies for PRS Production class — it’s 100% within the rules.
Put the hundreds of dollars you save into optics, ammo, and a suppressor — the 20″ barrel comes pre-threaded for brake or suppressor. This rifle has a nice 2-stage trigger, and Luth AR adjustable buttstock fitted to a CNC-machined anodized aluminum chassis. Weatherby guarantees SUB-MOA accuracy with premium ammo. As tested by American Rifleman, this Weatherby has shown outstanding accuracy for a factory rifle — close to half-MOA for five shots. Three factory ammo types shot 0.53″, 0.55″, and 0.57″ respectively. That’s impressive.
2. Midsouth Shooters — Good Selection of Popular Powders
You need to visit Midsouth Shooters NOW and check out the powder supplies. As of the date of this story, Midsouth has quantities of very hard-to-find Hodgdon powders including H4350 and H4831. Those propellants will probably sell out quickly. In addition, there are extensive supplies of popular Alliant, IMR, Norma, Vihtavuori and Winchester powders. Yes Midsouth has Vihtavuori N133 for you 6PPC shooters. Sorry Reloder 16 and Reloder 23 are out-of-stock. [Update 4/6/20 11:20 EDT: H4350 and H4831 still available, but Varget is sold out.]
3. Costco — Cannon Large Executive Safe, $699.99 (Save $200!)
$200 manufacturer’s savings is valid 3/30/20 through 4/27/20. While supplies last.
Being a responsible gun owner means securing your weapons at all times. However, not everyone can afford a multi-thousand dollar safe. Cannon Safe has been making quality yet affordable safes for decades. Now you can grab Cannon’s Executive Series Safe for $699.99. This is a BIG, 43.8 cubic foot-capacity vault with 60 minutes fire protection. Price for this large 59″ H x 45″ W Safe is just $699.99 INCLUDING SHIPPING! This is an amazing deal for a very big safe. NOTE: Just last week this same safe was $899.99 at COSTCO, so you Save $200!
4. Midsouth Shooters — Hornady Auto Progressive Press, $439.99
Plus BONUS — 500 FREE Hornady Bullets
Hornady’s Lock-N-Load AP Auto-Progressive Press is an excellent high-output device with many outstanding features. The powder measure is very precise and much easier to adjust than Dillon systems. Lock-N-Load bushings allow fast die changes. This auto-indexing progressive press advances the shell plate one station with each pull of the handle. This Hornady AP press features a Quick Change Priming System, Quick Change Metering Inserts, EX-Ject case ejection, and Case-Activated Metering. This Hornady press in on sale now at Midsouth for just $439.99. IMPORTANT: Purchasers of this press qualify for 500 FREE Bullets through the Hornady “Get Loaded” Promotion.
We’ve seen Vortex scopes on crazy low prices before but they’re usually lower power models. Now you can grab a Vortex Viper 6.5-20x44mm with the BDC reticle for the amazingly low price of $249.99. Vortex offers one of the best warranties in the business, and this is an outstanding value. This scope previously sold for $429.99.
6. My Patriot Supply — 2-Week Emergency Food Supply, $87.00
This full 4-Week Emergency Food Supply contains 92 servings with eight food varieties for breakfasts, lunches, and dinners. All meals are stowed in resealable, heavy-duty, 4-layer pouches. You’ll find 12 food varieties, with up to 25-year shelf life. Patriot Supply also sells a 4-week Food Supply for $197. That includes 12 food supplies and 282 servings.
7. MidwayUSA — Pro Series Competition Shooting Mat, $39.99
The MidwayUSA Pro Series Competition Shooting Mat is now on sale for just $39.99, 33% off the regular $59.99 price. The Pro Series mat measures a full 73.5″ x 35.5″. Zippered pockets on the front flap hold ammo or log books. And there are webbing “pockets” for bipod feet so you can pre-load your bipod with forward pressure. This quality mat boasts 0.35″ thick padding, multiple pockets, 6 grommets for staking, and a nice carry strap. It’s easy to transport, rolling up to about nine inches in diameter. User reviews of this $39.99 Shooting Mat have been very positive.
8. Brownells — Electronic Muffs, $24.99 (40% Off)
Brownells new, Second Generation Premium Electronic Earmuffs incorporate dual microphones that let you hear range commands while suppressing harmful noises. These affordable NRR23 muffs fold for easy storage, and you can plug your smartphone into the 3.5mm input jack. The bottom half of the muffs are shaped for more clearance. Right now these muffs are discounted from $41.99 to $24.99 — a 40% savings!
9. Cabelas — 1000 rounds Browning .22 LR, $39.99
We’ve heard that folks are hoarding .22 LR rimfire ammunitino again. Thankfully some big retailers have NOT raised their prices. In fact, Cabela’s in running a sale right now on .22 LR Browning Performance Rimfire (BPR) Ammo. You can buy 1000 rounds for just $39.99, just 4 cents per round. If you don’t need that many rounds, Academy Sports has a great deal on Aguila .22 LR HiVel 40gr ammo. Right now you can get a 50rd box for $2.29! That’s just 4.6 cents per round.
10. Amazon — 30000 mAh Battery Pack Power Bank, $36.99
These days, we are using our battery-powered mobile devices more than ever. It’s easy to run your smart-phone down in a few hours. We recommend having a high-storage battery pack. We’ve tried quite a few over the last couple years, and frankly, some were disappointing. There are very good owner reviews for this Bextoo USB Power Bank, rated at 30000 mAh. We like the red case, which is easy to find in luggage. This unit boasts a handy LCD read-out showing remaining capacity. When fully charged, this Bextoo Battery Pack should provide 9 charges for iPhone 11, almost 7 charges for Samsung Galaxy S10, and 2.5 charges for an iPad Mini.
Gavin Gear tests .308 Win ammo with his DPMS LR-308B, AR10-type rifle.
Our friend Gavin Gear of UltimateReloader.com owns a DPMS LR-308B, an AR10-type semi-auto rifle. Gavin finds that his DPMS has a healthy appetite for ammunition. So, he set up his Hornady Lock-N-Load progressive press to produce .308 Win ammo. This video shows the process of press set-up and operation, complete with Hornady’s automated Case Feeder and Bullet Feeder. Employing elevated rotary hoppers, the case feed and bullet feed systems really speed up production. The automated feeders allow the operator to produce cartridges without ever touching case or bullet with his hands.
If you need large quantities of .308 Win ammo for 3-Gun matches or tactical games, and if you value your time, a progressive press may be a wise investment. The progressive can load a complete round with every cycle of the press handle. With Case Feeder and Bullet Feeder in place, the Hornady L-N-L can easily crank out a new .308 round every 3-4 seconds (watch video at 5:25). Conservatively speaking, that’s 15 rounds per minute sustained production (and some guys can go even faster).
To learn more about the Hornady Lock-N-Load Progressive Press (with case/bullet feed options), and to see a list of the dies and accessories Gavin uses, click the link below:
In these challenging times, with the specter of the Coronavirus pandemic, it can be difficult to see positive developments. Here we’re pleased to report how one gun industry manufacturer, holster-maker Versacarry, is doing its part to provide vitally-needed Personal Protective Equipment (PPE). Versacarry is converting its production line to make masks and face shields for our health care workers, the brave men and women who put their lives at risk every day.
Versacarry is known for its quality leather handgun holsters, belts, and other firearm related products. In an effort to help with the fight against the COVID-19 virus that continues to affect thousands of people across the United States, Versacarry is converting its production facility from building holsters to producing face shields and face masks.
Justin Sitz, CEO/Owner of Versacarry told us: “When I saw and heard numerous reports that there was a critical shortage of face shields and face masks for medical and emergency workers, I knew that was something we could help with. I redirected our development engineers from working on new products for the gun industry to develop products and production methods… for the health care and emergency response workers.”
Remarkably, Versacarry was able to switch production in less than one week. The company will begin shipping face masks and face shields shortly. With weekly output expected at 20,000+ of each item, these will be sent to hospital personnel, EMTs, police officers, firefighters and others facing the COVID-19 virus on a daily basis.
For Health Care Workers — If you work for an organization that needs face masks and face shields, please contact Versacarry via this link: Versacarry.com/covid19.
For our readers who are stuck at home under government orders, we are reprising a video feature about hunting in Norway. For those whose horizons have been limited due to the “shelter at home” response to the Coronavirus pandemic, we offer this getaway to scenic Vesterålen in northern Norway…
This is one of the finest shooting videos we’ve ever seen. Set in the scenic Vesterålen archipelago of northern Norway, this high-quality 15-minute video is part National Geograhic travelog, part ballistics lesson, part gear review. Given the current COVID-19 lockdowns, we wish we had the opportunity to join Ulf Lindroth and Thomas Haugland on their remarkable shooting adventure. This video was originally created for Great Britain’s Fieldsports TV Channel.
This is an outstanding video, recommended for anyone interested in long-range hunting.
Long range shooters Lindroth and Haugland traveled to the Arctic Circle to field test a new .338 LM Blaser R8 (in GRS stock) fitted with a Zeiss Victory V8 4.8-35x60mm scope. (Ammo is Norma-brand .338 Lapua Magnum). The video shows how they confirm the ballistics of the Norma factory ammo in the Blaser R8 rifle system.
Ulf and Thomas initially test out the system confirming drop at multiple yardages, and then use the rifle for practical accuracy. Ulf says: “If you know your hunting will demand a long shot, and you want to push the limit but still be sure to make the first-shot kill… If you want to do an ethical hunt, if you want to push that limit, you have to do [this kind of testing].”
Ulf Lindroth (above) observed: “We shot [at 808 meters] observed the misses, clicked our way into the target, and now we have the true drop at that distance… in this air pressure, in this temperature. From there we can start working to find our TRUE trajectory. And when we have THAT… we can get serious about some target shooting.”
For decades, the Kelbly’s Super Shoot has been one of the premier events for 100/200-yard benchrest shooters. The Super Shoot attracts the top benchrest competitors on the planet, including legends such as Tony Boyer and Wayne Campbell, and many other Hall of Fame PPC pilots. Hundreds of ace shooters from around the world would come to North Lawrence, Ohio each year and compete. There would be a sea of windflags, and scores of top shooters shoulder to shoulder on the long firing line.
Things will be different this year. Due to the Coronavirus Pandemic, the Kelbly family has determined to cancel the 2020 Super Shoot. The next Super Shoot will be held in May 2021. Jim Kelbly issued this statement about the 2020 Event Cancellation:
Super Shoot 2020 Has Been Cancelled — Notice from Kelbly’s
Super Shooters,
After long weekend thinking about the Super Shoot, I have decided to cancel this year’s Super Shoot till May 2021. The new dates will be May 25 through 28, 2021. With COVID-19 turning the world upside down and quite possibly the worst to hit the USA will be in April this year, I think it is best to just cancel for this year. It is very likely that most travel bans both in USA and from foreign countries may still be in place in May. With the last 25 plus years of the Super Shoot being an International event, we would like it to end at Kelbly’s with the foreign shooters being able to attend the last Super Shoot at Kelbly’s.
I do not feel there is a good time this summer or fall to host the event with all other events in Benchrest shooting being postponed to June to October in the United States and in foreign countries as well. If we would hold the event later this year, it could conflict with other postponed matches and I really do not want to affect attendance at other matches. Our sport is struggling these last ten years and we must support all ranges still holding Benchrest matches.
The Next Super Shoot Will Be Held May 25-29, 2021.
I want to thank everyone that has contacted me with their opinions on this situation as it was appreciated and helped in my decision. I know I stated in previous email that I would wait till end of April to make my decision, but I felt a decision now was better for everyone to get travel and hotel arrangements taking care of.
I want to thank Wade Hull for working with me on this decision. Wade has generously decided to wait an extra year before he and his staff will take over Super Shoot. I also want to thank St. Louis Benchrest Club for helping Wade the first few years of hosting the Firearms Industry Super Shoot.
As far as those competitors that are signed up for this year’s event, we will just keep everyone signed up and with the same requests for next year as you had for this year.
As far as the shooters that have equipment here, we will keep your equipment here till end of 2021 if need be. We can help with export or moving the items to St Louis for 2022. For those that are interested in selling your equipment, I would suggest making up flyers for the 2021 Super Shoot to post on the For Sale board with sale pending at end of competition.
We would like to wish everyone a safe shooting season and ask you to support those ranges that are hosting competitions this year as long as you are healthy. Be smart and be safe.
Spotting scopes are important tools for hunters and target shooters, but until now you had to position your head close to the eye-piece and look directly through the lens. LongShot Target Camera (aka TargetVision) has changed how we can use our spotting scopes with the company’s innovative Hawk Smart Scope Spotting Scope Camera. The Hawk employs a digital camera that “sees” through the lens of your spotting scope and then wirelessly transmits the real-time view to your mobile devices. This allows you to position the spotting scope anywhere you like, and then use a tablet or phone to observe exactly what the scope “sees” down-range. Priced at just $249.00, the advanced Hawk Spotting Scope Camera is a great value.
Hawk Review by F-Class John
As a frequent user of spotting scopes, I often find myself struggling to position my scope close enough without it interfering with my shooting setup. During a match this isn’t a big deal, but when I’m out doing load development or practicing there are plenty of times I’d like to set up my spotting scope out of the way but still see what it’s looking at. I’ve tried other digiscope systems but they’ve all required me to use a cell phone directly over the eyepiece. That can work but it still forces me to position the scope within my shooting space. All of these frustrations ended when I got the Hawk. Now I can put the Hawk anywhere I want, plus a shooting buddy (or coach) can watch the view through the spotter remotely.
Setting Up the Hawk is Easy — WiFi Connection
The Hawk comes in a nice hard-sided case that is big enough to fit the unit and charging cable and easily fits in a range bag for transport. Once its battery is charged, simply slide the Hawk over your eye-piece, tighten the screw clamp down and then turn the Hawk on. To pair, go to WiFi settings, select the HAWK IP address, and then open the TargetVision App. You’ll be asked to enter the provided passcode (only required the first time) and then you’ll automatically begin to see what your spotting scope sees. I like that it connects using WiFi because that frees up my Bluetooth for other items such as a LabRadar. This allows me to use the HAWK alongside other devices without competing for functionality.
Hawk Offers Shot-Marking System — GREAT Feature!
For use while target shooting, the Hawk has one outstanding built-in feature. The digital view from the scope can mark your shots! The Hawk’s shot marking software allows the Hawk to track and identify shots on target. The Hawk has a couple settings that allow you to change the color and size of the marked shots as well as showing your groups and group size. This is really a huge value-added feature of the Hawk. The shot-marking functionality turns your spotting scope into a highly capable shot-marker system. That’s especially great when doing load development.
Rotating Camera Head Adds Versatility
Another ingenious feature of the HAWK is that you can rotate the head unit without affecting your actual scope set-up. This allows you to easily “level up” the output image on your device while leaving your scope tight in its mount after zooming in or out. I found this to be a really useful at my local range which has uneven ground. As I moved the scope around, I simply turned the head and kept watching. With variable-power spotting scopes, the Hawk’s rotating head really helps you adjust the picture output quickly after adjusting the zoom power on the eyepiece.
SUMMARY — Excellent Product with Multiple Functions
Overall the HAWK exceeded my expectations. The image quality was clear and in general matched what my eye would see through the scope itself. In testing I found it worked equally well on my iPad and iPhone with gallery photos and videos easily transferred from the App to my device files. The HAWK is easy to install and configure for your devices. The ability to see downrange remotely — without having to stare through the lens — makes this device a great accessory for any spotting scope.
Great for Training — This unit is especially useful for training purposes. The coach can be watching the shooter’s position/technique, while keeping an eye on target and windflags downrange using the streamed image from the Hawk camera. Overall, we think Longshot Target Camera (TargetVision) has built a winner, and the Hawk is unquestionably a superb value at $249.00.
Hawk Owners Also Praise This Spotting Scope Camera:
“Image quality is outstanding and the camera is very easy to attach, set up, and use. No more straining at the eyepiece of my spotting scope. I love it!” Ned T., Verified Buyer
“The unit is extremely easy to setup. The App has great features and the unit has endless applications. A great addition to a nice spotting scope.” Evan D., Verified Buyer
“Hawk is built very well and works perfect. The App is easy to operate. Marks shots on steel out to 935 yards at the range … would definitely recommend this item.” Brett D., Verified Buyer
This Video Shows the Features of the Hawk Spotting Scope Camera:
There’s an interesting thread in our Shooters Forum right now — all about good choices for a .45 ACP handgun. If you’re considering getting your first .45 ACP pistol, you should read that thread. If you already own one or more .45 ACP handguns, this article offers some good tips on handloading options.
Good Powder Choices for the .45 ACP
We know that many of our readers own .45 ACP handguns and load for this extremely accurate “classic” cartridge. When selecting a powder for the .45 ACP, there are many good options. All the major powder manufacturers make propellants with appropriate density and burn rate characteristics for the .45 ACP. Popular choices include: AA #5 (Accurate Powder); Bullseye (Alliant); Clays, HP-38, and Titegroup (Hodgdon); VV N310 and N320 (Vihtavuori); and WW 231 and WST (Winchester). We’ve tried all those powders in a variety of .45 ACP handguns. When we consider all the factors that make for a good pistol powder, we think N320 is one of the best available propellants for the .45 ACP.
Vihtavuori N320 is very accurate, it meters well, and it burns clean, with minimal smoke and flash. If you haven’t tried VV N320 yet, you should.
Pros and Cons of Different Powders for the .45 ACP
This Editor has personally tried out eight or more different powders for the .45 ACP. Bullseye works but it is very dirty (both smoke out the barrel and sooty powder fouling on case). Though it otherwise burns clean, Titegroup leaves a singular (and nasty) high-temp flame streak on your brass that is hard to remove. AA #5 is a good choice for progressive press newbies as you use more powder so a double charge will (usually) be obvious. I like AA #5 but N320 was more accurate. Clays burns clean but some powder measures struggle with flake powders like this. WW 231 offered excellent accuracy and metered well, but it kicked out sparks with little pieces of debris that would hit me in the face. Who wants that?
I personally tried all the powders listed above with lead, plated, and jacketed bullets. After testing for accuracy, consistency, and ease of metering, I selected VV N320 as the best overall performer.
Vihtavuori N320
No powder tested was more accurate (WW 231 was equally accurate).
Meters very well in all kinds of powder measures.
Produces very little smoke from muzzle.
Does not put nasty burn streak on brass like Tite-Group does.
Low Flash — you don’t get particles and sparks flying out like WW 231.
Cases come out from gun very clean — so you can tumble less often.
Forum member and gunsmith Michael Ezell agrees that N320 is a good choice for the .45 ACP. Mike has also found that WW 231, while accurate, produces sparks and a large flash. Mike writes: “I first started using N320 after my first night shoot, while shooting IDPA/IPSC matches. It was astonishing how much of a fireball the WW 231 created. I was literally blinded by the flash while trying to shoot a match. As you can imagine, that didn’t work out very well. I went from WW 231 to N320 and never looked back…and the flash from it was a fraction of what a kid’s sparkler would give off. I have nothing but good things to say about [N320] after using both. Night shoots are a real eye-opener! When it comes to a personal protection… there is, statistically, a very high chance that if you ever have to use a gun to protect yourself or your family, it’ll be in the darkness[.] Being blinded by muzzle flash (and deafened by the noise) are things that should be considered, IMO.”
This Editor owns a full-size, all-stainless S&W 1911. After trying numerous powders, I found VV N320 delivered the best combination of accuracy, easy metering, consistency, clean burning qualities, and low muzzle flash. My gun has proven exceptionally accurate using N320 with bullets from 180 grains to 230 grains — it will shoot as accurately as some expensive customs I’ve tried. At right is 5-round group I shot offhand at 10 yards with my 5″ S&W 1911.
NOTE: The bullet hole edges are sharp because I was using semi-wad-cutters, and the target paper is thick. Rounds were loaded with Vihtavuori N320 and 200-grain SWCs from Precision Bullets in Texas. We shoot Precision’s coated bullets in many of our pistols. These projectiles are accurate and they seem to reduce fouling in our pistol barrels. You can learn about them in this video:
Some of our readers have questioned how to set up their body dies or full-length sizing dies. Specifically, AFTER sizing, they wonder how much resistance they should feel when closing their bolt.
Forum member Preacher explains:
“A little resistance is a good, when it’s time for a big hammer it’s bad…. Keep your full-length die set up to just bump the shoulder back when they get a little too tight going into the chamber, and you’ll be good to go.”
To quantify what Preacher says, for starters, we suggest setting your body die, or full-length sizing die, to have .0015″ of “bump”. NOTE: This assumes that your die is a good match to your chamber. If your sizing or body die is too big at the base you could push the shoulder back .003″ and still have “sticky case” syndrome. Also, the .0015″ spec is for bolt guns. For AR15s you need to bump the shoulder of your cases .003″ – .005″, for enhanced reliability. For those who have never worked with a body die, bump die, or Full-length sizing die, to increase bump, you loosen lock-ring and screw the die in further (move die down relative to shell-holder). A small amount (just a few degrees) of die rotation can make a difference. To reduce bump you screw the die out (move die up). Re-set lock-ring to match changes in die up/down position.
That .0015″ is a good starting point, but some shooters prefer to refine this by feel. Forum member Chuckhunter notes: “To get a better feel, remove the firing pin from your bolt. This will give you the actual feel of the case without the resistance of the firing pin spring. I always do this when setting up my FL dies by feel. I lock the die in when there is just the very slightest resistance on the bolt and I mean very slight.” Chino69 concurs: “Remove the firing pin to get the proper feel. With no brass in the chamber, the bolt handle should drop down into its recess from the full-open position. Now insert a piece of fire-formed brass with the primer removed. The bolt handle should go to the mid-closed position, requiring an assist to cam home. Do this several times to familiarize yourself with the feel. This is how you want your dies to size your brass, to achieve minimal headspace and a nearly glove-like fit in your chamber.”
We caution that, no matter how well you have developed a “feel” for bolt-closing resistance, once you’ve worked out your die setting, you should always measure the actual amount of shoulder bump to ensure that you are not pushing the shoulder too far back. This is an important safety check. You can measure this using a comparator that attaches to your caliper jaws, or alternatively, use a sized pistol case with the primer removed. See Poor Man’s Headspace Gauge.
Here’s a radical new rifle. Instead of a vertical trigger that moves rearward when pulled by the index finger, this Blackwater T.O.R. A1 rifle has a lever INSIDE the lower receiver. That lever is moved by the operator’s THUMB, causing the rifle to fire. The claimed benefits of the “thumb-gun” are: 1) Improved Ergonomics (thumb stays in alignment with point of aim); 2) Better Mechanics (thumb is strongest digit and can manipulate lever easily); 3) Enhanced Safety (trigger blade/lever is not exposed).
This is a great deal — you can buy this 
Rotating Camera Head Adds Versatility
Good Powder Choices for the .45 ACP
This Editor owns a full-size, all-stainless S&W 1911. After trying numerous powders, I found VV N320 delivered the best combination of accuracy, easy metering, consistency, clean burning qualities, and low muzzle flash. My gun has proven exceptionally accurate using N320 with bullets from 180 grains to 230 grains — it will shoot as accurately as some expensive customs I’ve tried. At right is 5-round group I shot offhand at 10 yards with my 5″ S&W 1911.
To quantify what Preacher says, for starters, we suggest setting your body die, or full-length sizing die, to have .0015″ of “bump”. NOTE: This assumes that your die is a good match to your chamber. If your sizing or body die is too big at the base you could push the shoulder back .003″ and still have “sticky case” syndrome. Also, the .0015″ spec is for bolt guns. For AR15s you need to bump the shoulder of your cases .003″ – .005″, for enhanced reliability. For those who have never worked with a body die, bump die, or Full-length sizing die, to increase bump, you loosen lock-ring and screw the die in further (move die down relative to shell-holder). A small amount (just a few degrees) of die rotation can make a difference. To reduce bump you screw the die out (move die up). Re-set lock-ring to match changes in die up/down position.
