Forum member UrbanRifleman is a talented parts designer and 3D-printing specialist who has developed a series of useful products for shooters. One of the cool items UrbanRifleman produces is a quick-release “snap-on” mirage shield. The shield has tabs on each end. These tabs snap into plastic fittings front and rear. Here’s a video showing how it works:
The mirage shield attaches via front and rear quick-release fittings. In the back there’s a rail-mounted hook. In the front, at the muzzle end, is a 3D-printed ring clamp that fits the barrel precisely. These muzzle rings are tailored to the barrel diameters in a variety of diameters: 0.625″, 0.75″, 0.85″, 0.90″, 0.95″, 1.0″, 1.25″, and 1.50″. The front barrel-end clamp it shown at top. Below is the rear attachment, mounted on the Picatinny-type scope rail.
Satisfied Customer Praised this Shield Kit
One of our Forum members recently bought this quick-to-attach Mirage Shield and was very impressed: “I bought the Snap-on Mirage Shield from UrbanRifleman for my F-Class rifle. It worked so well I just ordered two more. Not only does it work well, it gets rid of the ugly and looks professional.” — BigJohn
You can order the Mirage Shield from UrbanRifleman on the Forum. The cost for the kit, which includes the Mirage Shield attachment fittings, is $29.00 for one or $50.00 for two units. As noted, the rear fitting clamps to a standard Picatinny-type scope rail. Up front is a plastic mount that clamps around the end of the barrel. You’ll need to specify your barrel diameter. You can see more photos on eBay, where you can purchase direct.
The Kit includes all parts needed to assemble a Picatinny-mounted mirage kit:
(1) Barrel-end front clamp with hardware (specific to barrel diameter)
(1) Picatinny rear mount with hardware
(1) Elastic Mesh 3″ x 30″ long
(2) Hangars
(2) Hooks
NOTE: This kit requires some assembly. Cut mesh to length, allowing for a few inches of stretch. Cut the ends square and glue them into the hangars with Elmer’s glue or similar adhesive. Then tape and let dry.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. EuroOptic and Midsouth — Nikon Scopes Up to 46% Off
Save hundreds right now on Nikon rifle scopes. Midsouth has slashed prices on Nikon’s excellent FX1000-series scopes while EuroOptic has some amazing deals on Nikon’s M-Tactical and P-Tactical optics — zoom scopes from 1-4X power to 6-24X power. The various discounted Nikon scopes should provide pretty much anything a tactical shooter or hunter could need. Here are some of the best deals:
FX1000 6-24x50mm SF Illum. FX-MOA Reticle FFP
Was $799.95, now just $599.95 at Midsouth
FX1000 4-16x50mm SF FX-MRAD Reticle FFP
Was $649.95, now just $449.95 at Midsouth
Nikon M-TACTICAL 4-16x42mm SF BDC-800
Was $449.95, now just $259.95 at EuroOptic
Nikon M-TACTICAL 3-12x42mm SF MK1-MRAD
Was $399.95, now just $199.95 at EuroOptic
2. Palmetto — .308 Win Savage with 3-9x40mm Vortex, $449.99
Here’s a complete .308 Win deer-hunting rig for under $450 with scope! The Savage Apex Hunter XP pairs a Model 110 rifle with a 3-9x40mm Vortex Crossfire II scope that’s mounted, bore-sighted, and ready to hunt. The stock features adjustable length-of-pull. Overall rifle length is 40.25″ with 20″ barrel, and weight is a modest 7.67 pounds complete with optics. This rifle is a .308 Win, but other chamberings are available.
3. Grizzly Industrial — Bald Eagle Slingshot Rest, $129.97
Maybe you’re just getting into F-Class or just need a good stable front rest to shoot from and don’t want to spend a ton of money on one. Don’t worry because Grizzly now has the Bald Eagle BE1129 aluminum slingshot rest for an amazingly low $129.97 Closeout price. Just add your favorite front bag and you’re ready to go with a competition quality elevation adjustable rest. They also have the Bald Eagle BE1209 – Big Fifty Rest on sale now for $202.97, nearly 50% off. With a much wider span and cast-iron legs, the Big Fifty is designed for larger guns up to .50 caliber. Either way, these rests are a great value.
4. EuroOptic — Leica CRF 2400-R Rangemaster, $550 No Tax
For long-range hunters, a compact laser rangefinder (LRF) is a vital accessory — and not just for ranging prey before taking the shot. You can use the LRF to range distant objects to get an idea of how far you’ll need to trek to your desired location. There are many good rangefinders on the market, but we have always liked the handheld Leicas. The CRF 2400-R Rangemaster is a solid value at $550.00. Plus, right now EuroOptic will pay any state sales tax you might owe. That can save you up to $50.00.
5. Midway USA — Lyman 8-Station Turret Press, $135.03
Right now you can get Lyman’s new All-American 8-station turret press for just $135.03. That’s a great price. This high-capacity turret press sells elsewhere for up to $229.99. The Lyman offers more die stations than the 6-station RCBS Turret and the 7-station Redding T-7. It also has a strong rear support that minimizes head flex. NOTE: Priming on the Lyman turret is done in the front; the image above shows the priming station but not the vertical tube which holds stacked primers.
6. Precision Reloading — 10% Off All Frankford Arsenal Products
Now through the end of September you can save ten percent (10%) on virtually all Frankford Arsenal products in stock at Precision Reloading. this includes the great new Intellidropper powder dispenser, Case Prep Center, Wet Tumbling System, Perfect Seat Hand Priming Tool, Precision Scales, Brass Dryer, Powder Trickler, Bullet Trays, Media Separator, and more. See all sale items at PrecisionReloading.com.
7. Midsouth — Frankford Click-Adjust Hand Priming Tool, $61.99
This is a GREAT primer seating tool. It has good feel, plenty of leverage, and the primer feed-from-tray works well. Importantly, it has a click-adjust wheel for precise primer seating depth control. Read our Frankford Primer Seating Tool Product Review by gunsmith Jim See. Now discounted from $72.49 to $61.99 at Midsouth, this is a great product for the price. The tool comes complete with 12 precision shell holders.
8. Cabelas — Garmin GPSMAP 64ST Handheld, $199.99
Hunters who spend considerable time in the wilderness, far from roads and mapped trails, should have a hand-held GPS that can plot their location within a few meters. Right now Cabelas.com has the highly-regarded Garmin GPSMAP 64ST on sale for $199.99. That’s fifty bucks off the regular price. This same handheld Garmin GPS sells for $242.50 on Amazon, so this is a great price at Cabelas.com.
9. Midsouth — Aguila .22 LR Ammo, 500 Rds $17.99
Plinking is fun. Especially when your ammo is really cheap. If you need low-cost .22 LR rimfire ammo for range sessions with friends and family, check out this crazy good deal from Midsouth. You get 500 rounds of Aguila 38gr HiVel .22 LR ammo for just $17.99 (marked down from $32.99). That works out to 3.6 cents ($0.036) per round. We’ve used this stuff. It’s not match-grade, but it’s more than adequate for .22 LR handguns and rifles with fun targets, such as dueling trees and rimfire poppers.
10. Midsouth — 250 Adhesive Precision Targets on Roll, $12.49
Midsouth offers 250 self-adhesive Benchrest Targets on a convenient roll. These stick-on targets are great for load development. The aiming diamond helps align the cross hairs of your scope while the 1/4″ grid pattern makes it easy to eyeball your group size. At the bottom are fields for your load info. Each Target sticker measures 6″ x 4″ with a 4.5″ x 2.5″ printed area. Midsouth sells the 250-target roll for $12.49.
This story is about a great shooter, Joe Hendricks Jr., and his Eliseo RTS Tubegun, chambered in 6mm Competition Match. With this versatile rifle, Joe Hendricks Jr. won the 2019 CMP Cup Aggregate Title for Match Rifles. Joe comes from a long line of talented marksmen. His father AND his grandfather are elite competitive shooters. His dad has been a National Champion, and all three generations have shot together, shoulder to shoulder, on the Remington Rifle Team. Like grandfather, like father, like son.
Joe says: “I think it’s pretty cool that there have now been two major Across the Course Championships won by a Hendricks using a Gary Eliseo chassis, one by me this year, and one in 2014 when my father (Joe Hendricks Sr.) won the NRA National Championship.”
Photography by Meghan Hendricks.
Joe Hendricks Jr.’s Rifle — Eliseo RTS Chassis, Rem 40X Action, Krieger Barrel
Joe’s rifle is built on a Competition Machine RTS Target Model chassis. This Tubegun features a Remington 40X action with Pacific Tool & Gauge Bolt and Jewell trigger. The scope is a Leupold 6-18x40mm. The barrel is a Krieger chambered in 6mm Competition Match. Joe explains: “The 6mm Competition Match is a cartridge that my dad came up with. It is basically a .243 Winchester with a 31° shoulder.”
If you look carefully in the photo below, you’ll note the silver-toned, adjustable butt-plate. That’s an upgrade Joe added: “I did a small modification to the stock, where I put on an Anschutz buttplate instead of the standard one Gary Eliseo uses. This Anschutz hardware provides a little bit more adjustability.”
Here Joe Hendricks Jr. fires at 200 yards from the standing position.
The Standing Position — Why It’s Critical to Match Success
Joe told us: “As far as shooting strategies and training methods go, I shoot a lot of standing practice — at least 50 shots per session. I still train the other positions of course, but I believe if you start your day off with a great standing score, it really makes the rest of the day easy because then you don’t feel like you’re playing catch-up the whole time.”
Joe explains: “When I’m shooting standing, I shoot in a manner very similar to the way that Carl Bernosky does. He’s written a few articles about the standing position. He always talks about making sure the shot goes off inside his hold, and I’m the same way. I don’t try to do too much. I just let the gun do its thing and when/if it stops in the Ten Ring, I shoot the shot. If it doesn’t, I don’t.”
About the CMP Cup Two-Day Course of Fire
The CMP Cup is a two-day match comprised of two, 1000-point Aggregates, for a 2000-point Grand Agg. Each day, the competitors fire 100 shots total from the 200, 300, and 600 yard lines. The match starts with 20 shots slow fire standing at 200 yards. Next are two, 10-shot, rapid fire strings in 60 seconds from the sitting position. Next are two, 10-shot strings in 70 seconds prone at 300 yards (rapid fire prone). Each day’s course of fire concludes with two, 20-shot sequences of slow-fire prone at 600 yards.
6mm Competition Match Cartridge — Slower Powder Yields Better Barrel Life
My dad was shooting a 6XC for a while and was getting tired of going through almost two barrels a year. So, he came up with the 6mm Competition Match. Like I said, it is a .243 Winchester with a 31-degree shoulder. This delivers the same (if not better) velocity as the other popular 6mm cartridges, but we get almost double the barrel life because we increased the case capacity, so we can shoot a slower burning powder. The barrel I took to Camp Perry that won the CMP Cup had over 3700 rounds on it when I was finished. [EDITOR: Take note readers! Most 6mm barrels are toast after 2500 rounds.] Granted it definitely needed to come off at that point, but it obviously was still shooting well enough to win!
Accurate Load with Peterson Brass, Berger Bullets, and Vihtavuori N165
The two loads I shot all week were Berger 108gr BT behind Vihtavuori N165 in Peterson Cartridge Company brass for 200 and 300 yards, and then Berger 115 VLD behind N165 in Peterson brass for 600 yards. Both loads are easily going over 3000 FPS. I try to only use the best components for reloading, so that’s why I go with Berger, Vihtavuori, and Peterson. Obviously Berger and Vihtavuori quality are pretty known, but I believe Peterson is right up there with Lapua[.] I’ve visited the Petersen factory many times. I’m always blown away by the time and effort Peterson puts into everything.
Winning Marksmanship — the Mental Game
The other big thing I’ve been focusing on lately is my mental game. In order to be at the top of a sport, regardless of the sport, the athlete has to have a solid mental approach. For me, I’ve learned that my key is confidence. A good shooting buddy, who was with me the first day of the CMP Cup, suggested I was arrogant because I kept telling him I was going to win. Then I told him it was confidence not arrogance. If I was confident in my ability, I did not think there was any way I could lose. [Editor: To help build confidence and visualize success, we recommend With Winning in Mind, by Lanny Bassham, an Olympic gold-medal winning marksman.]
All in the Family — Three Generations of Hendricks Marksmen
Joe’s father, Joseph Hendricks Sr., has been a National Champion rifle shooter. Joe’s grandfather, Gary Hendricks, is also a talented marksman. In fact, all three men — grandfather, father, and son — shot together on the Remington Rifle Team. Joe says that the shooting sports have helped build strong family bonds. He and his father enjoy shooting together, and competing against one another: “I learn so much just by watching my dad… shoot. Even though I have been competing for 10 years now, I’m still incredibly new to the shooting sports compared to my dad. My father is always there to help.”
“I feel very privileged to have grown up in the family that I did, with not only my father as a competitive shooter, but my grandfather as well. I definitely would not be the person I am today, let alone the shooter, without either of them. At one point, all three of us were on the Remington Rifle Team. I’ve had the opportunity to shoot team matches with all three of us on one team, as recently as this past summer.”
“Initially when I began shooting competitively, I was putting a lot of pressure on myself. I wanted to be as good a shooter as my dad and grandfather. I was trying so hard that it was really affecting my scores negatively. Then one year, I told myself I was just going to have fun, and not worry about match scores. That year was the year I really started to win things, and shoot some good scores.”
“When my father won the NRA National Championship in 2014, I was so proud, but along with being proud, all it did was make me more motivated. Ever since I started shooting, I wanted to win a National Championship, but after he won, it just fueled my fire more. There is a bit of father/son rivalry. It’s a lot of fun if we are shooting right next to each other at the same time. We just give each other crap about shooting a bad a shot, or shooting a lower score by a point or an X.”
“My dad started shooting when he was around 10, so he has a vast amount of knowledge compared to most people, especially me. He is always there to help whenever I have a question on anything firearm or shooting related. To this day, whenever I’m done with a match, I always talk to my dad. He always has time to listen to what I have to say.”
Today’s precision shooter is connected. He or she is likely to bring a number of electronic items to the range, such as a smartphone, tablet computer, Kestrel, LabRadar chronograph, and more. These digital devices all require electricity to operate. Unfortunately, most ranges don’t include convenient charging stations for your gadgets. Therefore you need to bring battery back-up. Here are three good options, with storage capacities from 10200 mAh to 42000 mAh. The first unit is fully weather-proof, so it is good for hunters and tactical shooters exposed to the elements. The largest power pack, with AC outlet, is quite versatile and works well on car-camping trips.
1. FosPower 10200 mAh Waterproof Charger, $29.99
When you’re at the range or on a hunt, it’s smart to have a USB-output battery pack for smart phone, target-cam monitor, even a LabRadar. There are many battery packs available, but most are fairly fragile, with exposed ports. This “ruggedized” FosPower 10200 mAh charger is different. It is waterproof, dust-proof, and shock-proof. (IP67 certified: dust and water resistance for up to 3ft/1m for 30 minutes under water.) It can handle all that a PRS competitor or hunter can dish out. It even has a handy LED light. Right now it’s priced at $29.99 with FREE Shipping (on orders over $25.00).
2. EasyAcc 20000 mAh Battery Pack with Fast Charging, $37.99
If you want to charge multiple devices, such as a tablet and a LabRadar, you need serious capacity. The EasyAcc 20000 mAh battery pack can charge up to four devices simultaneously. Notably, this $37.99 Battery Pack charges faster than most other 20K packs. It has two power input ports, allowing it to fully charge in 6-7 hours. (We have another 20000 mAh battery unit that takes over 16 hours to fully charge!). This unit will charge an iPhone 7 six times, a Samsung S8 four times or an iPad Mini two times. Note, 77% of Amazon purchasers rated this unit Five Stars (with 13% Four-Star reviews).
3. Webetop 42000 mAh USB, 12v DC, 110v AC Power Station, $108.99
Many folks have asked us “How can I use a laptop, chronograph, or electronic powder dispenser that requires 110 volt AC power when I’m at the range?” Sure you can take power from your car’s 12 volt cigarette lighter jack, but you’ll still need a very long cable and a 12 volt to 110 volt step-up transformer. If you run a cable from the parking lot to the bench or shooting bay you’ll have to leave a window open in your vehicle and fellow shooters can trip over the long cord.
A better solution is to get a portable, combo 12 volt + 110 volt power unit. This versatile 42000 mAh Webetop Power Station will drive a 110v device, plus charge a tablet and cellphone, all at the same time. You can run a LabRadar for days with this power-pack. It will also power CPAP machines and other 12V devices. One nice feature is rapid charging. Before your range session or camping trip, plug this into the wall. It will get fully charged in 7-8 hours. It’s a bargain right now for $108.99 on Amazon.
Sightron SIII 45x45mm Competition with ED Glass — Review by James Mock
Sightron has introduced a new, high-magnification Benchrest scope, the SIII SS 45x45mm Competition. This new-for-2019 45-power scope now offers very high-quality glass. In response to consumer demand, for this model, Sightron has upgraded to premium ED (extra low dispersion) glass. This kind of superior glass has been available with other more-expensive premium optics brands, and now Sightron has joined the ED-Glass ranks.
Testing the 45x45MM ED Sightron Benchrest Scope
Most of my shooting is done at 600 yards now. New for 2019, Sightron has introduced an impressive new 45-power competition scope, offered with either a Target Dot (EDTD) or Fine Cross Hair (EDFCH) reticles. I was able to test the target dot model. With this model I can check the ED glass used by Sightron and 45X is certainly enough for the 300- and 600-yard competitions I shoot.
Although this scope lacks some of the new features found on the SVSS models, it is designed for the shooter who wants a quality scope that is light enough to be used in short range Benchrest. It seems that Sightron designed this scope for the short range Benchrest shooters. They skipped all of the frills and designed this scope for PERFORMANCE.
The Sightron SIII 45x45mm has a simple side-focus parallax adjustment that works very well. The ocular focus is like the older models in that it has a locking ring rather than the fast focus. It has a 45mm objective lens. The model that I have features a 1/10th MOA dot reticle while the click adjustments are 1/10th MOA. NOTE that — the clicks are one-tenth MOA, NOT the 1/8th MOA you might expect.
At 20.5 ounces this scope will allow shooters to make most of the weight requirements found in Benchrest shooting. With the superb Japanese ED glass, it equals or surpasses the image quality of scopes of equal magnification costing twice as much.
Although this scope lacks some of the frills, it has the features that serious shooters appreciate. It has 7-layer coating on all lens (termed Zach 7), 1/10th MOA adjustments, 1/10th MOA dot reticle (or fine crosshair), generous eye relief, life time warranty, and 30mm main tube.
Testing Procedure for Sightron SIII 45x45mm
For testing the scope, I mounted it on my BAT/Leonard Benchrest rifle (shown above). The rifle is chambered in 6mm BRAI and I will shoot the rifle at 300 and 600 yards. The 300-yard match consists of three, 10-shot targets on the IBS 300-yard target. The 600-yard match consists of four, 5-shot targets. Both are shot for score only. So far the scope has performed flawlessly and the image is bright and the resolution was superb. One thing that I have dreamed about is a scope that will resolve 6mm bullet holes at 600 yards. Since I have shot this scope only during the summer months in Louisiana I cannot see bullet holes at 600 yards. However, in fairness to the scope, I don’t think the Hubble telescope would resolve the holes in the mirage and heat evident this summer.
I have tested scopes that cost over $3000 and this Sightron (street price $900-$1000) held its own with those higher-priced models and surpassed many of them. I wish that this scope would have been available back when I was shooting short range Benchrest. It is truly a great value for today’s shooter.
The first test performed was “shooting the square” in which I fired five (5) shots in order, cranking the turrets from shot to shot. This scope passed test #1 with flying colors — the fifth and last shot went through the same hole as shot #1. Here’s the process. After Shot One (lower left), I then cranked the scope up 4 MOA and fired Shot Two. For the third shot, I moved the scope to the right 4 MOA followed by a 4 MOA adjustment down. Next, I adjusted 4 MOA left and fired the fifth. If the scope tracts properly, the fifth shot should hit close to the first. In fact, Shot Five went through the same hole as Shot One. Of course one must have the same aiming point and an accurate rifle.
Shown above is the target that I shot at 100 yards. This was shot with my 6 BRAI rifle with 30.4 grains of H4895 and Bart’s 105gr VLD “Hammers” seated .006“ into the lands. This “square” shows perfect tracking and absolute accuracy in both windage and elevation adjustments. (However, note that the target itself was a little crooked as stapled to the backer). Sightron’s ExacTrac turret technologies shown below may be the reason for such great “shooting the square” results:
The above picture was taken from the Sightron catalogue and it illustrates what may be the most important feature for Benchrest shooters. They named it the ExacTrack and it features a cone shaped contact point on the windage and elevation knobs that allow constant and even pressure on the erector tube. In the picture above the left side shows conventional scope erector tube contact (figures 1 and 2). Figures 3 and 4 show how the Sightron system works. This unique system solves the problem of a flat tip pushing a round tube. My tests showed that this scope holds point of aim exceptionally well.
Using the Sightron 45X Scope in Match Conditions
I recently tested the the 45x45mm Sightron in competition for the first time. In preparation for this match, I tried four loads at 200 yards. I was impressed with the positive and accurate adjustments without the “mushy” feel that many scopes with fine adjustments exhibit.
I shot 3-shot groups and the groups measured as follows: 1) 30.0 grains H4895/Fed 205/Bart’s Gungnir = .605”; 2) 30.5 grains H4895/Fed 205/Bart’s Gungnir = .945”; 3) 30.0 grains H4895/Fed 205/Berger 108gr BT = .459”; 4) 30.4 grains H4895/Fed 205/Bart’s Hammer = .309” (this is my 600-yard “go-to” load).
The 300-yard match saw 101° temperatures with light, switching head winds up to 5 mph. The mirage was very noticeable but I was still able to see bullet holes. The scope performed well (although I did not). The click adjustments were precise and positive with both tactile and audible indicators. This is a quality scope.
SUMMARY of Test — Final Impressions
I am more than satisfied with this scope and I believe it represents a great value for competitive shooters. It has great glass, with positive adjustments that hold point of aim. Because of the ED glass, the image has correct color and is sharp to the edges. The scope’s reticle features a 1/10th MOA dot. The turrets use 1/10th MOA adjustments that allow precise aim and point of impact adjustments.
Is there anything that I would change? No, not for short range Benchrest (100/200/300yards), but for 600-yard shooting, I prefer a more detailed reticle with MOA-based hash-marks. With vertical and horizontal hashmarks one can quickly determine the amount of clickes needed to correct impact. Also, a variable power scope is very handy for those days when mirage does not allow precise aiming. Readers should note that Sightron does make a variable power 10-50x60mm ED scope featuring a reticle with MOA-based hash-marks. That should be a good option for shooters who need a high-magnification, variable-power comp scope.
But for those who prefer a fixed-power scope, Sightron’s new SIII SS 45x45mm is a smart option, that is a very good value. If you are in the market for a fixed-power 45X benchrest scope, I can heartily recommend this new offering from Sightron. — James Mock
Short History of “Freezing” Benchrest Scopes
Several years ago, many Benchrest shooters were having trouble with their riflescopes holding point of aim. Cecil Tucker, Jackie Schmidt, Gene Bukys, and Bob Brackney modified some scopes to “freeze” the adjustments. This worked fairly well but it hindered a shooter’s ability to make fine adjustments quickly.
The late Ron Hoehn along with others started using small Delrin screws to stabilize the erector tube. This brought about my first use of Sightron scopes. I contacted Sightron and asked if they would furnish a scope for me to try this procedure and they agreed. A friend and I drilled the two holes and tapped them to apply the Delrin screws. Surprisingly, this system worked well on the Sightron 36X SII model. As a matter of fact, COL Billy Stevens won the Super Shoot using one of those SII Benchrest scopes. There was a drawback however. When one tightened the screw against the erector tube there was a slight point of aim movement. This was not too noticeable in group shooting but hampered the score shooters.
The scope pictured above another Sightron I’ve used, a 10-50x60mm. This medium-priced scope offered excellent value-for-money and it sold very well. It performed superbly for me and in my opinion represents one of the best buys in a long range scope. About two years ago, Sightron decided to put out a more advanced scope. Sightron added locking turrets, 34mm tube, and a few more “premium” features. Of course the price reflected these changes but there was not a severe price increase.
3-Gun competitors must be wicked fast (and accurate) with rifle, pistol, and shotgun.
What’s the most exciting, physically challenging shooting sport? An argument can be made that three-gun shooting (also called “multi-gun”) tops the list. To succeed in the 3-Gun world, competitors must be fast and accurate with rifle, pistol, and shotgun. They must exhibit blazing speed in the short-range stages plus serious accuracy during long-range stages.
America’s top 3-Gun shooters held to Florida next month. The 2019 3-Gun Nation (3GN) Nationals take place October 12-13 at Southern Tactical Range in Holt, Florida. There will be plenty of fast action, plus some long-range accuracy stages. Watch the video below for a preview of the event:
If you’d like to try your hand at 3-Gun shooting, you can still register for the 3GN Nationals, by visiting 3GunNation.com. This match will feature a minimum of 8 stages of fire over a 2-Day Format. Southern Tactical Range offers a mixture of natural terrain and bay stages, featuring a long range area with targets up to 1000 yards.
Blast from the Past — 3-Gun Nation Championship Shoot-Off 2013
In this video 2019 3GN Champion Dan Horner wins a dramatic shoot-off at 2013 3GN Nationals. Horner, after leaving the USAMU, now shoots for Team SIG Sauer.
Hardware for 3-Gun Competition — Guns & Gear
In this NSSF video, Top Shot Finalist Chris Cerino reviews the hardware you’ll need for multi-gun matches. Chris talks about carbine configurations — including barrel, handguard, and optics options. Cerino also demonstrates pistol techniques and explains the key features of a belt/holster rig.
National Hunting and Fishing Day (NHF Day) takes place on Saturday, September 28, 2019. The annual celebration, on the 4th Saturday of September, serves as a reminder that conservation succeeds because of leadership and funding from hunters, shooters and anglers. National, regional, state and local organizations will run thousands of “open house” hunting- and fishing-related events around the country. Events will include Fishing Derbys, Hunting Expos, Wing-shooting tournaments, and much more. Over four million Americans will participate.
Find Events in Your State
For info on NHF Day, visit www.nhfday.org. To find NHF Day events in your state, click links below:
Hunters Aid Conservation Efforts
The contributions of hunters, in the form of excise taxes paid on firearms, ammunition, and archery equipment, benefit every state. These taxes have generated approximately $5.6 billion for wildlife conservation since 1939.
Origins of National Hunting & Fishing Day
National Hunting and Fishing Day dates back to the 1960s. In 1972, by Senate Joint Resolution 117, Congress requested the President to declare the fourth Saturday of September 1972 as National Hunting and Fishing Day. On May 2 of the same year, President Richard Nixon signed proclamation 4128 designating the Fourth Saturday in September National Hunting and Fishing Day.
“Science tells us that exposure to continuous noise of 85 dB for eight hours is enough to cause permanent hearing loss, and worse, spikes of 130 dB and more can result in permanent hearing damage instantly.” Source: NRA Blog.
The Risk of Hearing Loss
Hearing loss can be progressive and irreversible. If you are a shooter, this is serious business. As the NRA Blog cautions: “You may not even realize you’re harming your hearing. Hearing loss occurs gradually, and can go effectively unnoticed until symptoms become severe. By then, the damage is done.”
Nobody wants to go deaf. But we often see shooters without effective hearing protection when they are walking around a few yards behind the firing line. That’s bad — even if you are away from the firing line, gunshot noises can damage your hearing. You MUST use effective hearing protection every time you go to the range. Good foam earplugs costs mere pennies but they can prevent deafness in your later years. Many folks also wear muffs over plugs.
Sound Levels for Common Noises:
9mm Luger pistol: 160 dB
Jet aircraft engine (near): 140 dB
.22 LR pistol: 134 dB
Normal human pain threshold: 120 dB
Noisy Nightclub: 110 db
Riding Motorcycle at 65 mph: 103 db
Power Lawnmower: 95 dB
Hearing damage possible: 85 dB (sustained for 8+ hours)
Ringing Telephone: 80 dB
Normal conversation: 60 dB
The Myth of the “Quiet” .22 LR
The NRA Blog notes that “many rimfire shooters, particularly those using the beloved .22 Long Rifle cartridge, argue that the small .22 LR caliber doesn’t produce enough sound to damage your hearing”. So, is that really true … or is it a myth?
In fact, a .22 LR can be much louder than you think — a .22 LR pistol can produce sound levels of 134 dB. That’s well above the normal human pain threshhold.
Highest Protection NRR 34dB-Rated Ear Muffs
For under $15.00 you can buy quality ANSI-approved muffs with a 34dB Noise Reduction Rating — the best you can get. Chose the Bright Yellow TR Industrial Muffs at $13.48, or the dark green Walker EXT Range Muffs for $13.99. Both products have padded head-bands which retract. Another dual-shell design with a 34dB NRR rating is the new FNova Muffs priced at just $12.88.
Many hunters and competitive shooters prefer low-profile ear muffs. As these typically have a lower Noise Reduction Rating, perhaps NRR 22-24, we recommend running earplugs under muffs, particularly when you are at a busy range or shooting a match. If you use low-profile electronic muffs, such as Howard Leight Impact Sport Muffs, you should still be able to hear range commands even with plugs underneath.
Howard Leight MAX NRR33 Earplugs, Just $7.98 for 50 Pairs.
20 Pairs
50 Pairs
These Howard Leight NRR33 Max plugs are your Editor’s favorite foam earplugs. Between shooting, motorcycling and mowing lawns, I probably have Max plugs in my ears 3-4 days a week. This is a very good price for a bulk pack of 50 pairs. And if you act soon, you can get free shipping to boot. This Editor just bought a 50-pack myself. And, yep, I got 50 pairs for $7.98 delivered, less than a pint of premium beer costs at my local pub:
Here’s an extreme range of .224-Caliber bullets: 35gr varmint bullet and 90gr match bullet. Of course, along with bullet length/design, you need to consider MV when choosing twist rate.
Even with the same caliber (and same bullet weight), different bullet types may require different rates of spin to stabilize properly. The bullet’s initial spin rate (RPM) is a function of the bullet’s muzzle velocity and the spin imparted by the rifling in the barrel. You want to ensure your bullet is stable throughout flight. It is better to have too much spin than too little, according to many ballistics experts, including Bryan Litz of Applied Ballistics. Glen Zediker has some basic tips concerning barrel twist rates and bullet stability. These come from his latest book, Top Grade Ammo.
Choosing the Right Twist Rate
I’d always rather have a twist too fast than not fast enough. Generally… I recommend erring toward the faster side of a barrel twist decision. 1:8″ twist is becoming a “new standard” for .224 caliber, replacing 1:9″ in the process. The reason is that new bullets tend to be bigger rather than smaller. Don’t let a too-slow twist limit your capacity to [achieve] better long-range performance.
Base your next barrel twist rate decision on the longest, heaviest bullets you choose to use, and at the same time realize that the rate you choose will in turn limit your bullet choices. If the longest, heaviest bullet you’ll shoot (ever) is a 55-grain .224, then there’s honestly no reason not to use a 1:12″. Likewise true for .308-caliber: unless you’re going over 200-grain bullet weight, a 1:10″ will perform perfectly well.
Bullet Length is More Critical than Weight
Bullet length, not weight, [primarily] determines how much rotation is necessary for stability. Twist rate suggestions, though, are most usually given with respect to bullet weight, but that’s more of a generality for convenience’s sake, I think. The reason is that with the introduction of higher-ballistic-coefficient bullet designs, which are longer than conventional forms, it is easily possible to have two same-weight bullets that won’t both stabilize from the same twist rate.
Evidence of Instability
The tell-tale for an unstable (wobbling or tumbling) bullet is an oblong hole in the target paper, a “keyhole,” and that means the bullet contacted the target at some attitude other than nose-first.
Increasing Barrel Length Can Deliver More Velocity, But That May Still Not Provide Enough Stability if the Twist Rate Is Too Slow
Bullet speed and barrel length have an influence on bullet stability, and a higher muzzle velocity through a longer tube will bring on more effect from the twist, but it’s a little too edgy if a particular bullet stabilizes only when running maximum velocity.
My failed 90-grain .224 experiment is a good example of that: I could get them asleep in a 1:7″ twist, 25-inch barrel, which was chambered in .22 PPC, but could not get them stabilized in a 20-inch 1:7″ .223 Rem. The answer always is to get a twist that’s correct.
These tips were adapted from Glen’s newest book, Top-Grade Ammo, available at Midsouth. To learn more about this book and other Zediker titles, and read a host of downloadable articles, visit ZedikerPublishing.com.
AIM Field Sports FS-42 Rifle Carry Bag (Shoulder Pack)
Gear Review by Jason Baney
I recently had the opportunity to test out the AIM Field Sports FS-42 rifle carry bag from the UK. This brand, while not well known in the USA, is popular throughout Europe as AIM makes incredibly robust and well thought-out gear. In addition to AIM’s house brand, AIM also sells OEM gear for other well-known companies, so this outfit is well-versed in the market and know what works and what doesn’t. These are incredibly well-made bags at a very fair price (£157.50, about $196.00 USD). I expect we will see more AIM rifle bags come to the U.S. market in the coming years.
About the Rifle — Accuracy International AX in 22 Creedmoor
The rifle in the photos is Jason’s new “Groundhog Laser”, chambered in 22 Creedmoor. Jason reports: “The Accuracy Int’l AX platform lets me swap barrels quickly and the Tangent Theta scope allows quick zero resets when switching barrels. The suppressor is a Silencerco Omega and the scope mount is an ERATAC adjustable. With the 24″ 1:8″-twist Bartlein 5R barrel and a healthy charge of H4350 it runs a 75gr Amax just a touch under 3500 FPS for a 1000-yard come-up of about 5.3 mils!”
Jason added: “Even my 6-year-old son loves to shoot the rifle (with the LOP set at minimum). The boy took the first 7 groundhogs with it over a 2-hour span. I took 4 that day as well — an epic groundhog adventure. My son also recently shot this rifle at 1000 yards. On his very first 1K outing, he went 10 for 11 shots on a 2/3 IPSC target!”
For me, the FS-42 was intended to carry my Accuracy International AX (another fabulous tool from the UK) to and from the range, matches, and groundhog fields. While AIM Field Sports makes several types of Carry Cases and Drag Bags, this FS-42 is the model for right-side folding stock rifles up to a length of about 41.5.” AIM’s FXS-42 would be the choice for similar length rifles but with a butt-stock that folds to the left.
Good Shoulder Strap System Provides Comfortable Carry
The backpack straps received quite a bit of use and are well designed and rugged — you hardly know they exist until you deploy them for use. I actually enjoyed carrying my heavy rifle even when loaded with a tripod (strapped on the external loops), ammo, bipod, mags, suppressor, camera gear and a couple bean bags. It had no problem handling my heavy rifle and gear. Even with a 24″ barrel with suppressor mounted, and large Tangent Theta 5-25 scope the bag had plenty of room to secure and protect it.
The FS-42 gives plenty of room for support gear and has many well placed straps and reinforcements to keep your rifle in place and protected in transit. The more time I spend with it the more features I notice. It is obvious that these bags were designed by shooters. While no soft case/drag bag can quite offer the same protection of a hard case, it is much less cumbersome and holds about the same amount of gear. It is so well thought-out there is even a spot for a cleaning rod along the spine of the case!
Overall, the AIM FS-series bags are well-made, well laid-out and a great value in a world where some similar bags can be nearly twice the cost. These AIM bags are a great alternative to dragging heavy hard cases around.
Final Thought: “The FS-42 Bag is excellent — I dig it. It has worked well for all tasks. The only thing I would change is a bit more padding where the bag lies on your low-back/pelvis area.”
The Risk of Hearing Loss
Increasing Barrel Length Can Deliver More Velocity, But That May Still Not Provide Enough Stability if the Twist Rate Is Too Slow
