Today’s precision shooter is connected. He or she is likely to bring a number of electronic items to the range, such as a smartphone, tablet computer, Kestrel, LabRadar chronograph, and more. These digital devices all require electricity to operate. Unfortunately, most ranges don’t include convenient charging stations for your gadgets. Therefore you need to bring battery back-up. Here are three good options, with storage capacities from 10200 mAh to 42000 mAh. The first unit is fully weather-proof, so it is good for hunters and tactical shooters exposed to the elements. The largest power pack, with AC outlet, is quite versatile and works well on car-camping trips.
1. FosPower 10200 mAh Waterproof Charger, $29.99
When you’re at the range or on a hunt, it’s smart to have a USB-output battery pack for smart phone, target-cam monitor, even a LabRadar. There are many battery packs available, but most are fairly fragile, with exposed ports. This “ruggedized” FosPower 10200 mAh charger is different. It is waterproof, dust-proof, and shock-proof. (IP67 certified: dust and water resistance for up to 3ft/1m for 30 minutes under water.) It can handle all that a PRS competitor or hunter can dish out. It even has a handy LED light. Right now it’s priced at $29.99 with FREE Shipping (on orders over $25.00).
2. EasyAcc 20000 mAh Battery Pack with Fast Charging, $37.99
If you want to charge multiple devices, such as a tablet and a LabRadar, you need serious capacity. The EasyAcc 20000 mAh battery pack can charge up to four devices simultaneously. Notably, this $37.99 Battery Pack charges faster than most other 20K packs. It has two power input ports, allowing it to fully charge in 6-7 hours. (We have another 20000 mAh battery unit that takes over 16 hours to fully charge!). This unit will charge an iPhone 7 six times, a Samsung S8 four times or an iPad Mini two times. Note, 77% of Amazon purchasers rated this unit Five Stars (with 13% Four-Star reviews).
3. Webetop 42000 mAh USB, 12v DC, 110v AC Power Station, $108.99
Many folks have asked us “How can I use a laptop, chronograph, or electronic powder dispenser that requires 110 volt AC power when I’m at the range?” Sure you can take power from your car’s 12 volt cigarette lighter jack, but you’ll still need a very long cable and a 12 volt to 110 volt step-up transformer. If you run a cable from the parking lot to the bench or shooting bay you’ll have to leave a window open in your vehicle and fellow shooters can trip over the long cord.
A better solution is to get a portable, combo 12 volt + 110 volt power unit. This versatile 42000 mAh Webetop Power Station will drive a 110v device, plus charge a tablet and cellphone, all at the same time. You can run a LabRadar for days with this power-pack. It will also power CPAP machines and other 12V devices. One nice feature is rapid charging. Before your range session or camping trip, plug this into the wall. It will get fully charged in 7-8 hours. It’s a bargain right now for $108.99 on Amazon.
Sightron SIII 45x45mm Competition with ED Glass — Review by James Mock
Sightron has introduced a new, high-magnification Benchrest scope, the SIII SS 45x45mm Competition. This new-for-2019 45-power scope now offers very high-quality glass. In response to consumer demand, for this model, Sightron has upgraded to premium ED (extra low dispersion) glass. This kind of superior glass has been available with other more-expensive premium optics brands, and now Sightron has joined the ED-Glass ranks.
Testing the 45x45MM ED Sightron Benchrest Scope
Most of my shooting is done at 600 yards now. New for 2019, Sightron has introduced an impressive new 45-power competition scope, offered with either a Target Dot (EDTD) or Fine Cross Hair (EDFCH) reticles. I was able to test the target dot model. With this model I can check the ED glass used by Sightron and 45X is certainly enough for the 300- and 600-yard competitions I shoot.
Although this scope lacks some of the new features found on the SVSS models, it is designed for the shooter who wants a quality scope that is light enough to be used in short range Benchrest. It seems that Sightron designed this scope for the short range Benchrest shooters. They skipped all of the frills and designed this scope for PERFORMANCE.
The Sightron SIII 45x45mm has a simple side-focus parallax adjustment that works very well. The ocular focus is like the older models in that it has a locking ring rather than the fast focus. It has a 45mm objective lens. The model that I have features a 1/10th MOA dot reticle while the click adjustments are 1/10th MOA. NOTE that — the clicks are one-tenth MOA, NOT the 1/8th MOA you might expect.
At 20.5 ounces this scope will allow shooters to make most of the weight requirements found in Benchrest shooting. With the superb Japanese ED glass, it equals or surpasses the image quality of scopes of equal magnification costing twice as much.
Although this scope lacks some of the frills, it has the features that serious shooters appreciate. It has 7-layer coating on all lens (termed Zach 7), 1/10th MOA adjustments, 1/10th MOA dot reticle (or fine crosshair), generous eye relief, life time warranty, and 30mm main tube.
Testing Procedure for Sightron SIII 45x45mm
For testing the scope, I mounted it on my BAT/Leonard Benchrest rifle (shown above). The rifle is chambered in 6mm BRAI and I will shoot the rifle at 300 and 600 yards. The 300-yard match consists of three, 10-shot targets on the IBS 300-yard target. The 600-yard match consists of four, 5-shot targets. Both are shot for score only. So far the scope has performed flawlessly and the image is bright and the resolution was superb. One thing that I have dreamed about is a scope that will resolve 6mm bullet holes at 600 yards. Since I have shot this scope only during the summer months in Louisiana I cannot see bullet holes at 600 yards. However, in fairness to the scope, I don’t think the Hubble telescope would resolve the holes in the mirage and heat evident this summer.
I have tested scopes that cost over $3000 and this Sightron (street price $900-$1000) held its own with those higher-priced models and surpassed many of them. I wish that this scope would have been available back when I was shooting short range Benchrest. It is truly a great value for today’s shooter.
The first test performed was “shooting the square” in which I fired five (5) shots in order, cranking the turrets from shot to shot. This scope passed test #1 with flying colors — the fifth and last shot went through the same hole as shot #1. Here’s the process. After Shot One (lower left), I then cranked the scope up 4 MOA and fired Shot Two. For the third shot, I moved the scope to the right 4 MOA followed by a 4 MOA adjustment down. Next, I adjusted 4 MOA left and fired the fifth. If the scope tracts properly, the fifth shot should hit close to the first. In fact, Shot Five went through the same hole as Shot One. Of course one must have the same aiming point and an accurate rifle.
Shown above is the target that I shot at 100 yards. This was shot with my 6 BRAI rifle with 30.4 grains of H4895 and Bart’s 105gr VLD “Hammers” seated .006“ into the lands. This “square” shows perfect tracking and absolute accuracy in both windage and elevation adjustments. (However, note that the target itself was a little crooked as stapled to the backer). Sightron’s ExacTrac turret technologies shown below may be the reason for such great “shooting the square” results:
The above picture was taken from the Sightron catalogue and it illustrates what may be the most important feature for Benchrest shooters. They named it the ExacTrack and it features a cone shaped contact point on the windage and elevation knobs that allow constant and even pressure on the erector tube. In the picture above the left side shows conventional scope erector tube contact (figures 1 and 2). Figures 3 and 4 show how the Sightron system works. This unique system solves the problem of a flat tip pushing a round tube. My tests showed that this scope holds point of aim exceptionally well.
Using the Sightron 45X Scope in Match Conditions
I recently tested the the 45x45mm Sightron in competition for the first time. In preparation for this match, I tried four loads at 200 yards. I was impressed with the positive and accurate adjustments without the “mushy” feel that many scopes with fine adjustments exhibit.
I shot 3-shot groups and the groups measured as follows: 1) 30.0 grains H4895/Fed 205/Bart’s Gungnir = .605”; 2) 30.5 grains H4895/Fed 205/Bart’s Gungnir = .945”; 3) 30.0 grains H4895/Fed 205/Berger 108gr BT = .459”; 4) 30.4 grains H4895/Fed 205/Bart’s Hammer = .309” (this is my 600-yard “go-to” load).
The 300-yard match saw 101° temperatures with light, switching head winds up to 5 mph. The mirage was very noticeable but I was still able to see bullet holes. The scope performed well (although I did not). The click adjustments were precise and positive with both tactile and audible indicators. This is a quality scope.
SUMMARY of Test — Final Impressions
I am more than satisfied with this scope and I believe it represents a great value for competitive shooters. It has great glass, with positive adjustments that hold point of aim. Because of the ED glass, the image has correct color and is sharp to the edges. The scope’s reticle features a 1/10th MOA dot. The turrets use 1/10th MOA adjustments that allow precise aim and point of impact adjustments.
Is there anything that I would change? No, not for short range Benchrest (100/200/300yards), but for 600-yard shooting, I prefer a more detailed reticle with MOA-based hash-marks. With vertical and horizontal hashmarks one can quickly determine the amount of clickes needed to correct impact. Also, a variable power scope is very handy for those days when mirage does not allow precise aiming. Readers should note that Sightron does make a variable power 10-50x60mm ED scope featuring a reticle with MOA-based hash-marks. That should be a good option for shooters who need a high-magnification, variable-power comp scope.
But for those who prefer a fixed-power scope, Sightron’s new SIII SS 45x45mm is a smart option, that is a very good value. If you are in the market for a fixed-power 45X benchrest scope, I can heartily recommend this new offering from Sightron. — James Mock
Short History of “Freezing” Benchrest Scopes
Several years ago, many Benchrest shooters were having trouble with their riflescopes holding point of aim. Cecil Tucker, Jackie Schmidt, Gene Bukys, and Bob Brackney modified some scopes to “freeze” the adjustments. This worked fairly well but it hindered a shooter’s ability to make fine adjustments quickly.
The late Ron Hoehn along with others started using small Delrin screws to stabilize the erector tube. This brought about my first use of Sightron scopes. I contacted Sightron and asked if they would furnish a scope for me to try this procedure and they agreed. A friend and I drilled the two holes and tapped them to apply the Delrin screws. Surprisingly, this system worked well on the Sightron 36X SII model. As a matter of fact, COL Billy Stevens won the Super Shoot using one of those SII Benchrest scopes. There was a drawback however. When one tightened the screw against the erector tube there was a slight point of aim movement. This was not too noticeable in group shooting but hampered the score shooters.
The scope pictured above another Sightron I’ve used, a 10-50x60mm. This medium-priced scope offered excellent value-for-money and it sold very well. It performed superbly for me and in my opinion represents one of the best buys in a long range scope. About two years ago, Sightron decided to put out a more advanced scope. Sightron added locking turrets, 34mm tube, and a few more “premium” features. Of course the price reflected these changes but there was not a severe price increase.
3-Gun competitors must be wicked fast (and accurate) with rifle, pistol, and shotgun.
What’s the most exciting, physically challenging shooting sport? An argument can be made that three-gun shooting (also called “multi-gun”) tops the list. To succeed in the 3-Gun world, competitors must be fast and accurate with rifle, pistol, and shotgun. They must exhibit blazing speed in the short-range stages plus serious accuracy during long-range stages.
America’s top 3-Gun shooters held to Florida next month. The 2019 3-Gun Nation (3GN) Nationals take place October 12-13 at Southern Tactical Range in Holt, Florida. There will be plenty of fast action, plus some long-range accuracy stages. Watch the video below for a preview of the event:
If you’d like to try your hand at 3-Gun shooting, you can still register for the 3GN Nationals, by visiting 3GunNation.com. This match will feature a minimum of 8 stages of fire over a 2-Day Format. Southern Tactical Range offers a mixture of natural terrain and bay stages, featuring a long range area with targets up to 1000 yards.
Blast from the Past — 3-Gun Nation Championship Shoot-Off 2013
In this video 2019 3GN Champion Dan Horner wins a dramatic shoot-off at 2013 3GN Nationals. Horner, after leaving the USAMU, now shoots for Team SIG Sauer.
Hardware for 3-Gun Competition — Guns & Gear
In this NSSF video, Top Shot Finalist Chris Cerino reviews the hardware you’ll need for multi-gun matches. Chris talks about carbine configurations — including barrel, handguard, and optics options. Cerino also demonstrates pistol techniques and explains the key features of a belt/holster rig.
National Hunting and Fishing Day (NHF Day) takes place on Saturday, September 28, 2019. The annual celebration, on the 4th Saturday of September, serves as a reminder that conservation succeeds because of leadership and funding from hunters, shooters and anglers. National, regional, state and local organizations will run thousands of “open house” hunting- and fishing-related events around the country. Events will include Fishing Derbys, Hunting Expos, Wing-shooting tournaments, and much more. Over four million Americans will participate.
Find Events in Your State
For info on NHF Day, visit www.nhfday.org. To find NHF Day events in your state, click links below:
Hunters Aid Conservation Efforts
The contributions of hunters, in the form of excise taxes paid on firearms, ammunition, and archery equipment, benefit every state. These taxes have generated approximately $5.6 billion for wildlife conservation since 1939.
Origins of National Hunting & Fishing Day
National Hunting and Fishing Day dates back to the 1960s. In 1972, by Senate Joint Resolution 117, Congress requested the President to declare the fourth Saturday of September 1972 as National Hunting and Fishing Day. On May 2 of the same year, President Richard Nixon signed proclamation 4128 designating the Fourth Saturday in September National Hunting and Fishing Day.
“Science tells us that exposure to continuous noise of 85 dB for eight hours is enough to cause permanent hearing loss, and worse, spikes of 130 dB and more can result in permanent hearing damage instantly.” Source: NRA Blog.
The Risk of Hearing Loss
Hearing loss can be progressive and irreversible. If you are a shooter, this is serious business. As the NRA Blog cautions: “You may not even realize you’re harming your hearing. Hearing loss occurs gradually, and can go effectively unnoticed until symptoms become severe. By then, the damage is done.”
Nobody wants to go deaf. But we often see shooters without effective hearing protection when they are walking around a few yards behind the firing line. That’s bad — even if you are away from the firing line, gunshot noises can damage your hearing. You MUST use effective hearing protection every time you go to the range. Good foam earplugs costs mere pennies but they can prevent deafness in your later years. Many folks also wear muffs over plugs.
Sound Levels for Common Noises:
9mm Luger pistol: 160 dB
Jet aircraft engine (near): 140 dB
.22 LR pistol: 134 dB
Normal human pain threshold: 120 dB
Noisy Nightclub: 110 db
Riding Motorcycle at 65 mph: 103 db
Power Lawnmower: 95 dB
Hearing damage possible: 85 dB (sustained for 8+ hours)
Ringing Telephone: 80 dB
Normal conversation: 60 dB
The Myth of the “Quiet” .22 LR
The NRA Blog notes that “many rimfire shooters, particularly those using the beloved .22 Long Rifle cartridge, argue that the small .22 LR caliber doesn’t produce enough sound to damage your hearing”. So, is that really true … or is it a myth?
In fact, a .22 LR can be much louder than you think — a .22 LR pistol can produce sound levels of 134 dB. That’s well above the normal human pain threshhold.
Highest Protection NRR 34dB-Rated Ear Muffs
For under $15.00 you can buy quality ANSI-approved muffs with a 34dB Noise Reduction Rating — the best you can get. Chose the Bright Yellow TR Industrial Muffs at $13.48, or the dark green Walker EXT Range Muffs for $13.99. Both products have padded head-bands which retract. Another dual-shell design with a 34dB NRR rating is the new FNova Muffs priced at just $12.88.
Many hunters and competitive shooters prefer low-profile ear muffs. As these typically have a lower Noise Reduction Rating, perhaps NRR 22-24, we recommend running earplugs under muffs, particularly when you are at a busy range or shooting a match. If you use low-profile electronic muffs, such as Howard Leight Impact Sport Muffs, you should still be able to hear range commands even with plugs underneath.
Howard Leight MAX NRR33 Earplugs, Just $7.98 for 50 Pairs.
20 Pairs
50 Pairs
These Howard Leight NRR33 Max plugs are your Editor’s favorite foam earplugs. Between shooting, motorcycling and mowing lawns, I probably have Max plugs in my ears 3-4 days a week. This is a very good price for a bulk pack of 50 pairs. And if you act soon, you can get free shipping to boot. This Editor just bought a 50-pack myself. And, yep, I got 50 pairs for $7.98 delivered, less than a pint of premium beer costs at my local pub:
Here’s an extreme range of .224-Caliber bullets: 35gr varmint bullet and 90gr match bullet. Of course, along with bullet length/design, you need to consider MV when choosing twist rate.
Even with the same caliber (and same bullet weight), different bullet types may require different rates of spin to stabilize properly. The bullet’s initial spin rate (RPM) is a function of the bullet’s muzzle velocity and the spin imparted by the rifling in the barrel. You want to ensure your bullet is stable throughout flight. It is better to have too much spin than too little, according to many ballistics experts, including Bryan Litz of Applied Ballistics. Glen Zediker has some basic tips concerning barrel twist rates and bullet stability. These come from his latest book, Top Grade Ammo.
Choosing the Right Twist Rate
I’d always rather have a twist too fast than not fast enough. Generally… I recommend erring toward the faster side of a barrel twist decision. 1:8″ twist is becoming a “new standard” for .224 caliber, replacing 1:9″ in the process. The reason is that new bullets tend to be bigger rather than smaller. Don’t let a too-slow twist limit your capacity to [achieve] better long-range performance.
Base your next barrel twist rate decision on the longest, heaviest bullets you choose to use, and at the same time realize that the rate you choose will in turn limit your bullet choices. If the longest, heaviest bullet you’ll shoot (ever) is a 55-grain .224, then there’s honestly no reason not to use a 1:12″. Likewise true for .308-caliber: unless you’re going over 200-grain bullet weight, a 1:10″ will perform perfectly well.
Bullet Length is More Critical than Weight
Bullet length, not weight, [primarily] determines how much rotation is necessary for stability. Twist rate suggestions, though, are most usually given with respect to bullet weight, but that’s more of a generality for convenience’s sake, I think. The reason is that with the introduction of higher-ballistic-coefficient bullet designs, which are longer than conventional forms, it is easily possible to have two same-weight bullets that won’t both stabilize from the same twist rate.
Evidence of Instability
The tell-tale for an unstable (wobbling or tumbling) bullet is an oblong hole in the target paper, a “keyhole,” and that means the bullet contacted the target at some attitude other than nose-first.
Increasing Barrel Length Can Deliver More Velocity, But That May Still Not Provide Enough Stability if the Twist Rate Is Too Slow
Bullet speed and barrel length have an influence on bullet stability, and a higher muzzle velocity through a longer tube will bring on more effect from the twist, but it’s a little too edgy if a particular bullet stabilizes only when running maximum velocity.
My failed 90-grain .224 experiment is a good example of that: I could get them asleep in a 1:7″ twist, 25-inch barrel, which was chambered in .22 PPC, but could not get them stabilized in a 20-inch 1:7″ .223 Rem. The answer always is to get a twist that’s correct.
These tips were adapted from Glen’s newest book, Top-Grade Ammo, available at Midsouth. To learn more about this book and other Zediker titles, and read a host of downloadable articles, visit ZedikerPublishing.com.
AIM Field Sports FS-42 Rifle Carry Bag (Shoulder Pack)
Gear Review by Jason Baney
I recently had the opportunity to test out the AIM Field Sports FS-42 rifle carry bag from the UK. This brand, while not well known in the USA, is popular throughout Europe as AIM makes incredibly robust and well thought-out gear. In addition to AIM’s house brand, AIM also sells OEM gear for other well-known companies, so this outfit is well-versed in the market and know what works and what doesn’t. These are incredibly well-made bags at a very fair price (£157.50, about $196.00 USD). I expect we will see more AIM rifle bags come to the U.S. market in the coming years.
About the Rifle — Accuracy International AX in 22 Creedmoor
The rifle in the photos is Jason’s new “Groundhog Laser”, chambered in 22 Creedmoor. Jason reports: “The Accuracy Int’l AX platform lets me swap barrels quickly and the Tangent Theta scope allows quick zero resets when switching barrels. The suppressor is a Silencerco Omega and the scope mount is an ERATAC adjustable. With the 24″ 1:8″-twist Bartlein 5R barrel and a healthy charge of H4350 it runs a 75gr Amax just a touch under 3500 FPS for a 1000-yard come-up of about 5.3 mils!”
Jason added: “Even my 6-year-old son loves to shoot the rifle (with the LOP set at minimum). The boy took the first 7 groundhogs with it over a 2-hour span. I took 4 that day as well — an epic groundhog adventure. My son also recently shot this rifle at 1000 yards. On his very first 1K outing, he went 10 for 11 shots on a 2/3 IPSC target!”
For me, the FS-42 was intended to carry my Accuracy International AX (another fabulous tool from the UK) to and from the range, matches, and groundhog fields. While AIM Field Sports makes several types of Carry Cases and Drag Bags, this FS-42 is the model for right-side folding stock rifles up to a length of about 41.5.” AIM’s FXS-42 would be the choice for similar length rifles but with a butt-stock that folds to the left.
Good Shoulder Strap System Provides Comfortable Carry
The backpack straps received quite a bit of use and are well designed and rugged — you hardly know they exist until you deploy them for use. I actually enjoyed carrying my heavy rifle even when loaded with a tripod (strapped on the external loops), ammo, bipod, mags, suppressor, camera gear and a couple bean bags. It had no problem handling my heavy rifle and gear. Even with a 24″ barrel with suppressor mounted, and large Tangent Theta 5-25 scope the bag had plenty of room to secure and protect it.
The FS-42 gives plenty of room for support gear and has many well placed straps and reinforcements to keep your rifle in place and protected in transit. The more time I spend with it the more features I notice. It is obvious that these bags were designed by shooters. While no soft case/drag bag can quite offer the same protection of a hard case, it is much less cumbersome and holds about the same amount of gear. It is so well thought-out there is even a spot for a cleaning rod along the spine of the case!
Overall, the AIM FS-series bags are well-made, well laid-out and a great value in a world where some similar bags can be nearly twice the cost. These AIM bags are a great alternative to dragging heavy hard cases around.
Final Thought: “The FS-42 Bag is excellent — I dig it. It has worked well for all tasks. The only thing I would change is a bit more padding where the bag lies on your low-back/pelvis area.”
The NRA World Shooting Championship (WSC) starts today in West Virginia. The event runs September 18-21 at the the Peacemaker National Training Center in Glengary, WV. At the WSC, top professional and amateur shooters compete in a wide variety of shooting disciplines, including pistol, rifle, shotgun, and combined firearm sports.
As a key part of this event, Lapua will team up with Vudoo Gun Works on a special “tactical rimfire” stage. This allows shooters to enjoy the fun of PRS-style shooting with a rimfire cartridge. Lapua’s Center-X ammunition will be paired with a state-of-the-art Vudoo .22 LR rifle. On this stage, competitors will engage challenging targets at multiple ranges.
Even if you can’t make it to the World Shooting Championship, rimfire shooting with a Vudoo rig (or similar rifle) is a great way to cross-train for PRS/NRL with lower cost ammo. Factory loaded centerfire can easily cost $1.50 per round. Rimfire .22 LR ammo is a fraction of that cost. You can get good SK and Lapua ammo starting at about $6.50 per 50ct box. That’s just 13 cents per round.
“We are excited to return to the NRA World Shooting Championship at Peacemaker. As we did for the past two years, we are teaming with Vudoo to display the accuracy capabilities of Lapua ammunition. I think the shooters will be thrilled with the performance of Lapua Midas+ and Center-X ammunition in the Vudoo rifles. This event is a great test for shooter and equipment,” stated Adam Braverman, Lapua Director of Sales and Marketing.
by James Mock
After owning three different rifles with BAT actions, I have become a loyal fan of BAT Machine quality and customer service. Back in 2009, I traded my BAT/Scoville for the BAT/Leonard that I currently shoot. This rifle has a long history and Terry Leonard told me that “Old 87″ (as I have named it) was one of the earlier BATs that he stocked. He wrapped the stock in fiberglass and used 2-part epoxy back then. I must say that this rifle has held up remarkably well since it dates back to the 1990s. The action is a RB/LP/RE octagon Model B with .308 bolt-face.
Rifle Has Multiple Barrels for Multiple Disciplines
With this gun, I have shot several barrels of different calibers (.22 PPC, .22 PPC-short .095, 6mm PPC, 6XC, 6mm Dasher, .30BR, and will soon have a 6 BR-AI). It has been an exceptionally accurate rifle in several disciplines. In the hands of previous owners, it earned several Hall-of-Fame (HOF) points, and a “middle-of-the-pack” shooter (me) even received a HOF point with this rifle.
For most of its life, Old 87 served as a short range benchrest rifle, but I have used it for the last few years as a 600-yard rifle with the 6mm Dasher barrel. I was lucky enough to earn the Shooter of the Year award at the Prince Memorial Range in Louisiana for 2016.
After shooting my two Dasher barrels for last eight years, I have noticed a drop-off in accuracy at 600 yards. A decision had to be made — get a new barrel or sell the rifle and retire from competition. I will be 74 years old in six months and my competition days are limited due mainly to a chronic neck problem. After mulling over the decision to retire or not, I decided to give Old 87 one more year. Here is the story of how we upgraded the old war-horse.
Old 87 REBORN — Upgrading with New Components
I prefer cut-rifled barrels with four lands and grooves and have had success with .236 bore diameters and 1:8″ twist in long range rifles. I searched for barrels meeting those parameters and found a suitable BRUX at Bugholes.com (Southern Precision Rifles).
The 6BR-AI Option — Easy Fire Forming
I thought about having Billy Stevens chamber it for the Dasher, but decided to try something new. There seems to be a lot of interest in the 6BR-AI and I said, “Why not?” Well, I bought a shortened Dasher die from Harrell’s and will use my Wilson Dasher seating die. Bart Sauter was kind enough to let me use his reamer for chambering.
Fitting a New Roller-Type Cocking Piece on Older BAT Action
Since I was into the project this deep, I called Mike Ezell and ordered one of his Tungsten powder-dampened tuners. Since Old 87 had thousands of rounds since the firing pin spring has been replaced, I decided that it was probably needed. Well, I got to thinking (very dangerous) and asked Daryle Thom if it would be feasible to put a roller-type cocking piece and a new firing pin spring on such an old action.
The folks at BAT are very accommodating and they said that it would be no problem with such a conversion. While my bolt was in Idaho, the barrel with Ezell tuner arrived and I could not shoot it. However, my friend Jeff Turner loaned me his BAT bolt to see if it would work. Although the rifles differ in age by 15 or more years, the borrowed bolt worked perfectly in my rifle. This is a testimony to the great machine work performed at BAT Machine.
New Bolt Roller Tail-Piece Makes a Big Difference in Cocking Effort
With the borrowed bolt I managed to fire-form 50 rounds and get them ready for our 600-yard match on September 16. The folks at BAT quickly fixed my bolt by replacing the mainspring and ejector spring, polishing the ejector, and replacing the tail-piece with their roller type. Pictured below is this tail piece that makes a remarkable difference in the force needed to cock the action. It is amazing what this little wheel can do… even when placed in a 20+ year old action.
Working with the Ezell Barrel Tuner — Small Increments Work Best
Also, I would like to congratulate Mike Ezell on his new tuner which contains powdered Tungsten. It is easy to set up and Mike will help a buyer get maximum effectiveness from the unit. Just give him a call. Below is a picture of the tuner. I was lucky enough to have some time to “play” with it before the match.
Talking about the tuner, Mike writes: “Our new barrel tuners…
PDT stands for particle dampening technology. The science is there, we just applied it to a barrel tuner. The advantages are a wider tune window and more efficient control of barrel harmonics…in a tuner design that actually looks good.”
Mike advised me to set the tuner by turning it all the way into the shoulder and then come out to zero or the second time zero comes up if there is not at least half of a turn between the shoulder and the first zero. It is best to start with a proven load and adjust the tuner from that load. As unlikely as it seems, a rifle can go from a good tune to a very poor tune with only 5 marks (.005”) and vice versa.
Mike cautions those who use his tuner to NOT make adjustments which are too large. As a matter of fact, he recommends adjustments of .001 inch at a time. Ezell’s tuners are screwed onto the barrel with .900” by 32 threads per inch and has 32 marks on the circumference of the tuner. Therefore, each mark moves the tuner in or out by .001 inch. There are three set screws with Teflon tips which provide friction for the tuner on the threads. Do not tighten the screws so tight as they damage the fine threads.
If you want the smoothest bolt possible for your BAT, call or e-mail Daryle or Bruce Thom at BAT Machine and discuss your needs with them. I am sure glad that I did. If you want a state-of-the-Art tuner for your barrel, give Mike Ezell a call or visit his Ezell Custom Rifles Facebook Page.
— Good shooting, James Mock
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. CDNN Sports — Winchester XPR .30-06 Rifle with Scope, $299.99 after Rebate
Hunting season is here! If you need a good basic hunting rifle capable of taking game up to Elk size, here is a crazy good deal. CDNN is offering a Winchester XPR .30-06 Spr rifle, complete with 3-9x40mm Weaver scope, for just $349.99. But it gets even better. If you purchase before the end of September, you’ll get $50 back from Winchester. That $50 rebate lowers your net cost to $299.99! You can pay more than that for just a barrel! This same deal is offered for three other chamberings: .243 Win, .270 Win, and .308 Win.
2. EuroOptic.com — Vortex Scopes Close-Out Sale, Save Hundreds
Vortex scopes have become very popular for good reason. Vortex scopes deliver great performance for the price and Vortex offers a rock-solid lifetime warranty. Right now at EuroOptic.com you can save hundreds on Vortex Viper, Razor, and Strike Eagle riflescopes. Six of the deals are shown above, but there are more options on EuroOptic’s Vortex Close-Out Sale Page.
3. ArmorAlly — Lake City Once-Fired 5.56×45 Brass, $37.50/500
This Lake City 5.56×45 NATO brass is true once-fired, Milspec, thick-walled cartridge brass sourced from the U.S. Military. Lake City 5.56 (.223 Rem) brass is popular and reliable, and works great in AR-platform rifles. ArmorAlly includes 1% overage to account for any damaged brass. NOTE: Lake City brass has crimped primers and will need to be swaged prior to inserting a new primer. Lake City 5.56×45 brass is a good choice for varmint rifles that need hundreds of rounds in a weekend. Once you remove the crimp, you should get many reloads with this brass.
Everyone should own a rimfire handgun, and here’s a nice .22 LR pistol for under $200.00. Palmetto State Armory is selling the TX 22 for $249.99. Fill out the paperwork for the Taurus factory rebate, and you get $50.00 Cash Back. That lowers your net cost to just $199.99 — a great price for a fine .22 LR handgun. We like the ergonomics on this pistol and it has a surprisingly good trigger feel. NOTE: To qualify for the $50 rebate, the TX 22 must be purchased between July 1 and September 30, 2019.”
5. Grafs.com — FREE Litz Book with $200 Lapua Product Buy
This is one example. This deal works with $200 of ANY Lapua products purchased from Grafs.com.
Lapua makes great brass, bullets, and ammo. Bryan Litz writes great books. And now you can get both with this promotion from Graf & Sons. Here’s the deal — if you buy at least $200.00 worth of Lapua product at Grafs.com, you’ll get a free Applied Ballistics book authored by Bryan Litz. Mix and match any Lapua products — as long as the order totals $200.00 or more. We know you’ll want Lapua brass, but you should try out the great Lapua Scenar bullets too! NOTE: The book may be one of various Litz titles, such as Modern Advancements in Long Range Shooting or Ballistic Performance of Rifle Bullets. You do NOT get to pick the book title — you get what’s available.
6. Brownells & Natchez — 9mm Ammo Under $17.50 per 100
If you have a 9mm pistol, check out these great deals. because 9x19mm ammo is produced in such quantity, it is some of the cheapest centerfire pistol ammo you can buy. Here are two great 9mm Luger ammo deals for you, with big-name factory stuff for under 18 cents per round. Get either Sellier & Bellot or Fiocchi for under $0.18 per round. Brownell’s Sellier & Bellot $174.99/1000 deal with CODE NCS even includes free shipping. And the Fiocchi at Natchez is just $8.49 for a 50-count box.
7. Home Depot — Low-Profile Muffs + Shooting Glasses, $16.17
Every shooter should have an extra set of shooting muffs and protective earwear. These will provide vital protection for friends/guests you bring to the range. And let’s face it, sooner or later you’ll forget your own muffs, so it’s wise to keep an extra set in your vehicle at all times. This week Home Depot a great deal on Walker’s NRR 22 Muffs + ANSI Z87.1-rated Shooting Glasses. Get both as a Combo Set for just $16.17. Midsouth also has this combo for $19.99.
8. Midsouth — Lyman Cyclone Case Dryer, $52.49
Lyman’s Cyclone Case Dryer is great for those who wet-tumble cartridge brass. The Cyclone’s five, stackable trays let you separate up to five different case types. At full capacity, the Cyclone holds up to 1,000 .223 Remington cases or 2,000 9mm cases. The trays can also be used to dry parts that have been ultrasonically cleaned (such as pistol components). The Cyclone’s built in 3-hour timer lets you “set and forget”. Midsouth is offering a VERY good price– $52.49. The same Lyman case dryer is $64.18 on Amazon.
9. Amazon — Tipton Gun Butler, $19.96
Here’s a handy, portable gun caddy that works well for rifle maintenance chores at home or at the range. Right now the Tipton Gun Butler is marked down to $19.96. The Gun Butler offers a convenient platform for cleaning your gun or doing tasks such as scope mounting. Two removable forks/cradles hold a gun securely in place, while compartments and slots hold solvents, jags, brushes, mops, and tools. The Gun Butler features a convenient carrying handle, and slip-resistant rubber feet. NOTE: The front cradle may not work well with wide benchrest fore-ends.
The Risk of Hearing Loss
Increasing Barrel Length Can Deliver More Velocity, But That May Still Not Provide Enough Stability if the Twist Rate Is Too Slow
