Editor’s Note: The CMP National Matches at Camp Perry are less than a month away. This article covers key points for rifle competitors at major matches. To do well, you want to be an “informed competitor” with a positive attitude and full knowledge of the course of fire and match rules.
Don’t Be “That Guy” (The Bad Apple on the Firing Line)
By SFC Norman Anderson, USAMU Service Rifle Team Member
You know the guy, he’s still talking at the coffee jug when his preparation period begins, then his magazines aren’t loaded when the command “STAND” is given, and finally, he doesn’t know the rules when he argues with the block officer as his target comes up marked “9 and No”. Although this guy might be the highlight of the “after match” activities, he is the proverbial bad apple on the firing line. With this example fresh in your mind, let’s go over how not to be “that guy”.
While the sport of High Power shooting is a hobby for most, all are passionate about performance throughout the day. In order to achieve your maximum performance each and every day, it is essential that you conduct yourself as a professional competitor. As a competitor, you have a personal responsibility to know the course of fire as well as the rules and procedures that apply to it and to be prepared to follow them. Knowing this will not only make you a better competitor, but it will enable you to resolve situations with other targets besides your own. So what does all this mean? I’ll explain…
Know the Course of Fire
Know the course of fire. It sounds easy enough, as we all shoot plenty of matches, but it’s more than that. If you think about it, how many people in the pits, for example, do not really know what is happening on the firing line? This leads to targets being pulled early during a rapid fire string or missing a shot during a slow fire string. In cases like this, the result is the same, delays in the match and upset competitors. To avoid being “that guy,” it is imperative that you stay tuned to the events as the day progresses. When you are at the range shooting a match, be at the range shooting the match.
At any firearms competition — be sure you know (and understand) the course of fire.
Know the Rules
Now, let’s discuss rules. As you have probably heard more than once, the rulebook is your best friend. Here is why. I can virtually guarantee that most competitors know some of the rules based only on the old “this is how we do it at home” adage. The funny part of that is, the same green NRA rulebook and orange CMP rulebooks are used to govern High Power matches all over the country.*
It is vital that all shooters be familiar with the rules as they are written, not with “how they are applied at home”. This creates consistency and continuity in how matches are conducted, from local club matches to state tournaments to National Championships. Knowledge is power when it comes to scoring targets under contention, what to do in the case of a malfunction, or even how to file a protest correctly. These rules are in place for a reason and it benefits everyone to both know and operate by these rules.
Maintain Composure and Humility — Exhibit Good Sportsmanship
One aspect of competing that cannot be forgotten is bearing. As I mentioned earlier, you must be prepared for both good and bad to happen. All too often we all see “that guy” (or that “that guy’s” gear) flying off of the firing line in disgust. Remember that we all must maintain our composure and humility in all conditions, not matter what happens. After all, it’s just a game. To put it into perspective, if it were easy, attendance would be a lot higher. Sportsmanship must be displayed in an effort to keep from ruining the day for all those around you. It doesn’t cost anything to smile, and smiling never killed anyone. So turn that frown upside down and keep on marching, better days will come.
Like a Boy Scout — Always Be Prepared
Lastly, I would like to cover preparedness. Being prepared goes beyond simply having your magazines loaded and a zero on your rifle. It means approaching the firing line, knowing what you are about to do, being ready for what is going to happen (good or bad), and being ready for the results. If you approach the firing line to merely shoot 10 shots standing in your next LEG match, you are not going to be pleased with the result. You must be prepared mentally and physically, not only for the next stage, but also the next shot. By being prepared physically (equipment ready), you give yourself peace of mind which is an essential part of being prepared mentally, and by being prepared mentally, you are less likely to become distracted and are more likely to maintain focus for each and every shot.
Conclusion — Informed Competitors Make for Better Matches
The culmination of these efforts results in a shooter that knows how to be ready for success on the range, but also and perhaps more importantly, a shooter who knows what it means to be a competitor. When you have a range full of competitors who know and follow the rules and proper match procedures, the match runs smoothly, everyone shoots well, and a good time is had by all. In the end, isn’t that what it’s all about?
* After this article was originally written, the CMP separated its rules into multiple Rulebooks, which can all be downloaded from the CMP.org/rulebooks page:
The CMP Highpower Competition Rules 2025 (28th Ed.) for CMP-sponsored and sanctioned matches for Highpower Rifle events in National Trophy Matches, Excellence-In-Competition (EIC) Matches, CMP Cup Matches and other CMP-sanctioned competitions.
The CMP Pistol Competition Rules 2025 (28th Ed.) for CMP-sponsored and sanctioned Pistol Matches in the National Matches, National Trophy Matches, Excellence-In-Competition (EIC) Matches, and other CMP-sanctioned competitions.
What is Parallax?
Parallax is the apparent movement of the scope’s reticle (cross-hairs) in relation to the target as the shooter moves his eye across the exit pupil of the riflescope. This is caused by the target and the reticle being located in different focal planes.
Here’s a good explaination of scope parallax. This video has been watched over 790,000 times.
Why is it Important?
The greater the distance to the target and magnification of the optic, the greater the parallax error becomes. Especially at longer distances, significant sighting error can result if parallax is not removed.
How to Remove Parallax
This Nightforce Tech Tip video quickly shows how to remove parallax on your riflescope.
While keeping the rifle still and looking through the riflescope, a slight nod of the head up and down will quickly determine if parallax is present. To remove parallax, start with the adjustment mechanism on infinity and rotate until the reticle remains stationary in relation to the target regardless of head movement. If parallax has been eliminated, the reticle will remain stationary in relation to the target regardless of eye placement behind the optic.
S&W Model 617 now has a 10-round cylinder, but early models were six-shooters.
In recent years, the ranks of first-time gun buyers have grown dramatically. Millions of Americans have purchased their first-ever handgun. With so many handgun options (from derringers to Desert Eagles) many first-time buyers have trouble making a choice. What should those millions of new gun buyers have acquired first? Perhaps it should have been a rimfire revolver. Here is why…
The Argument for a Rimfire Revolver
Some years back, a close relative contacted this Editor. Wanting to get started in handgunning, he sought my advice on purchasing his very first handgun. “Should I get a Glock?”, he asked. “No” was my response. “Well how about an M&P?” he inquired. “Better ergos” I said, “but ‘No’ is still my reply.” “OK, how about a KelTec, they’re cheap…” “Absolutely not”, I replied.
I could tell he was getting annoyed, when he said “OK, Mr. know-it-all, so what handgun should I get?” Calmly, I replied: “Get a .22-caliber rimfire revolver. You will never out-grow it. You will learn sight alignment and trigger control. You can practice with inexpensive ammunition. A good .22 revolver will be considerably more accurate than 90% of the self-loading pistols you could buy. If you get a Smith & Wesson, you will keep the gun for the rest of your life and pass it on to your kids. If you or your heirs ever wear out the barrel or cylinder, Smith & Wesson will replace the parts for free, forever.”
First Handgun Choice — Consider a .22 LR Wheelgun
A very good choice for a first handgun is a Smith & Wesson .22 LR revolver, such as the S&W Model 617. The model 617 is extremely accurate, with a crisp trigger and good sights. Choose either a 4″ or 6″ barrel. The current model has a handy, 10-round cylinder.
This Editor’s first really accurate handgun was a .22 LR Smith & Wesson Model 617 that could easily stack ten shots in a dime at 10 yards. It remains my favorite and most-used handgun. What can we say about the Model 617? The single-action trigger pull is superb, and the accuracy surpasses most any semi-auto rimfire pistol, except for a few, very expensive target pistols. We like the 6″ version for the longer sight radius, but the 4″-barrel 617 is also very accurate, and it balances better.
You can learn all the fundamentals with this ultra-reliable handgun, shooting inexpensive .22 LR ammo. The model 617 is rugged, durable, and can give you a lifetime of shooting fun. Once you have mastered the basics of shooting with a .22 LR, you can move on to larger caliber handguns suitable for self-defense. Below is a slide-show illustrating a S&W model 617 ten-shot, with 6″ barrel. S&W also makes a 4″-barrel version of this revolver. (See: Shooting Demo Video with 4″ model 617.)
Another .22 Revolver Option, the Smith & Wesson Model 63
The current S&W Model 63 is a J-Frame .22 LR with 3″ barrel and fiber optic front sight. The Model 63 is compact enough for comfortable carry and well-balanced. The older Model 63, aka the “Kit Gun”, is an appreciating classic.
With the huge popularity of NRL22 and PRS rimfire matches, along with the growth of rimfire benchrest events, and local rimfire fun matches, we’ve seen heightened demand for all types of .22 LR ammunition. Plus the high cost of centerfire bullets and limited availability of powders and primers has pushed many centerfire shooters into the rimfire fold. Accordingly, prices have been rising for quality .22 LR ammunition. Thankfully, if you use Ammoseek.com, you can find most types of .22 LR ammunition, from bulk-pack plinking fodder to high-end Lapua, ELEY, RWS, SK, and Norma ammo.
Find Rimfire Ammunition Fast with AmmoSeek.com
Here’s a great search service that can help you locate hard-to-find ammunition and reloading components — while saving money in the process. AmmoSeek.com monitors scores of online vendors — checking current pricing and available inventory, for pistol, rifle, and shotgun ammunition. Looking for .22 LR ammo for your rimfire trainer or NRL22 rifle? Just select “.22LR” from AmmoSeek’s “Quick Seek” menu. NOTE: In mobile view type “22LR” in the “Search Ammo by Caliber” field top center.
And here are the 5/14/2025 search results for .22 LR ammunition. These are six of the 1000+ entries, starting with the least expensive, just 3.7 cents ($0.037) per round:
How to Search by Manufacturer and Bullet Weight
You can also search for a particular .22 LR ammunition manufacturer, and/or search by bullet weight. Just click on the “Modify Search Link”. Once you see the “Modify Search” column on the left, scroll down and you can sort by price (cost per round) and/or shipping cost. Here are the results of a search for SK .22 LR rimfire ammunition, which is very popular with NRL22 and Silhouette competitors:
This summer the Civilian Marksmanship Program (CMP) will host Smallbore and Air Gun events during the annual CMP National Matches in Port Clinton, Ohio. The National Matches, held at the Camp Perry National Guard Training Base since 1907, is conducted through a partnership between the CMP and the Ohio National Guard. All events are open to the public, with spectators allowed.
The National Smallbore and National Air Gun phases run in tandem, along with the National Pistol series, to allow athletes the option of competing in a variety of disciplines during their Camp Perry visit. Additional Aggregate events have been included for those firing in air rifle and three-position smallbore competitions, with challenging elimination team matches also part of the Air Gun and Smallbore schedules.
This year’s rimfire (smallbore) matches are scheduled for July 9-19, 2025. There will be iron sights and “any sights” (scoped) prone events as well as 3×20 (three-position) individual and team matches. All smallbore events are held on Camp Perry’s Petrarca Range, featuring a covered firing line and CMP’s own outdoor electronic targets. See below:
Air Rifle and Air Pistol Events at Camp Perry
For air rifle and air pistol competitors can attend the National Air Gun Championships, held on the electronic target range within the Gary Anderson CMP Competition Center. There will be two days of training sessions, followed by two days of 60-shot competitions. The Air Rifle events will run July 10-13, while Air Pistol will follow on July 14-17.
About the CMP National Matches:
The 2025 CMP National Matches will include the CMP National Trophy Pistol and Rifle Matches, National Games Matches, National Smallbore Matches, National Air Gun Championships, and the National Mid-Range and Long Range Matches. The month-long summer series also includes a variety of educational clinics for all experience levels.
To learn more about the upcoming CMP National Matches and review the National Matches schedule, visit the CMP website at thecmp.org/cmp-national-matches.
This popular video, viewed 3.8 million times on YouTube, provides a clear explanation of Minute of Angle (MOA) and how that angular measurement is used. Among novice shooters, there is much confusion over this term. In this NSSF Video, Ryan Cleckner, a former Sniper Instructor for the 1st Ranger Battalion, defines the term, “Minute of Angle” (MOA) and explains how you can adjust for windage and elevation using 1/4 or 1/8 MOA clicks on your scope. This allows you to sight-in precisely and compensate for bullet drop at various distances.
For starters, Ryan explains that, when talking about angular degrees, a “minute” is simply 1/60th. So a “Minute of Angle” is simply 1/60th of one degree of a central angle, measured either up and down (for elevation) or side to side (for windage). At 100 yards, 1 MOA equals 1.047″ on the target. This is often rounded to one inch for simplicity. Say, for example, you click up 1 MOA. That is roughly 1 inch at 100 yards, or roughly 4 inches at 400 yards, since the target area measured by 1 MOA increases in linear fashion with the distance.
More Minute of Angle (MOA) Explanatory Videos
This Gunwerks video explains that Minute of Angle subtends approximately 1″ for each 100 yards (well, 1.047″ to be more precise). That means a Minute of Angle increases in actual measured size the greater the distance of the target from the shooter.
This lengthy (24-minute) video defines Minute of Angle, and uses multiple diagrams to illustrate how MOA angular measurements works. The video also how MOA-based click values translate to point-of-impact changes at various distances.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
⏺️ » impressive new compact radar chrono — competition for Garmin
The new Athlon Rangecraft Velocity Pro Radar Chronograph is an impressive and very affordable compact chrono, now $349.99 at EuroOptic. This employs Doppler radar allowing ultra-accurate velocity readings and convenient set-up. Since the unit isn’t triggered by a muzzle blast, it can work with suppressors, muzzle brakes, and other muzzle devices. The Rangecraft Vel Pro reads velocities between 65 fps and 5000 fps so it works for all types of firearms. NOTE: If this Athlon Chrono is back-ordered and you don’t want to wait, Scheels.com may have inventory in stock at $399.99.
2. Palmetto SA — Panzer 12ga Tactical Shotgun, $279.99
⏺️ » Amazing deal on excellent defensive 12ga shotgun
The Panzer Arms M2 Tactical is an excellent 12ga defensive shotgun with 18.5″ barrel, scope rail, ergonomic grip, and integral sights. This shotgun features an inertia-driven system, which helps to reduce recoil and increase accuracy. Whether you’re looking for a bedside gun or a shotgun for 3-Gun matches, this is a great option for the price — just $279.99 on sale. NOTE: Many accessories and parts for the Benelli M2 can be used on the Panzer Arms M2, making it easy to find the parts you need.
3. Graf & Sons — Harris Bipod Sale, 20% Off, Many Sizes
⏺️ » Save 20% on rugged, reliable Harris bipods
If you need a good general-purpose bipod consider grabbing a Harris Bipod. On sale now at Graf’s, Harris bipods are available in multiple styles and leg lengths. Deluxe models offer swivel and cant options. And spring-loaded adjustable legs can quickly adapt to any terrain. Choose various rail mounting options including Picatinny rail and sling-stud. Made from aluminum with a black hardcoat anodized finish, Harris bipods are built to last. We still have 35-year-old Harris bipods that perform perfectly.
4. Amazon — Walker’s Slim Fit Earmuffs, $28.69
⏺️ » Popular NRR23 electronic muffs at super-low price
Walker’s makes excellent electronic ear muffs. And right now you can get the popular Walker’s Razor Slim Ultra Low Profile for under $30.00 on sale at Amazon. That’s an amazing price for sophisticated NRR23-rated muffs that protect your hearing while allowing you to hear range commands. These Razor Slim Muffs boast a low-profile design with slim yet comfortable ear cups. A variety of color choices are offered starting at $28.69 for Black with Teal. Or pay $30.46 for the all-black model.
5. Amazon — 52″ Rifle Case (Black or Camo), $31.99
⏺️ » Very good long case with handy, zippered pockets — black or camo
Here’s a good 52″ rifle case that can hold a long hunting or competition rifle. The padding is good and there are handy zippered storage compartments. The main side pocket has an open mesh fabric so you can see what’s inside. This 52″ case is on sale for just $31.99 on Amazon with your choice of dark black or tan camo pattern fabric. This is a good value for a large 52″ case. There is also a light gray version for $29.99.
6. Natchez — Winchester Lake City M193 Rifle Ammo, $74.99
⏺️ » Quality USA-made 5.56 NATO ammo for rifle practice
If you shoot an AR-15 in 3-gun or service rifle competition, or you do a lot of varmint hunting, you may want to to stockpile some quality ammo. With this deal you can get 150 rounds of quality American-made 5.56×45 ammo for just $74.99. That works out to just fifty cents per round. This Winchester USA Lake City M193 55gr Rifle Ammunition will also work in .223 Rem bolt-action varmint rifles.
⏺️ » Great price on handy targets that display hits brightly
These handy 6″ Splatter Targets (#ad) make it easy to identify where your shots are hitting. The target design is good for aiming with bright red vertical and horizontal lines, plus a center “X”. When a shot lands on the target, a bright yellow on black circle instantly appears at point of impact. These 6″-diameter stick-on targets are easy to apply to any target backer. Get a handy 100-target roll now for $26.99 on Amazon.
8. Creedmoor Sports — Fix It Sticks AR15 Kit, $70.60
⏺️ » Handy, compact tool kit great for AR15 rifle maintenance
If you own an AR-15 then you know cleaning and maintenance can be a real chore — Black Rifles run dirty. We recommend the Fix It Sticks AR15 Maintenance Kit, which has the vital tools you need (including special items for cleaning action components). The soft carrying case has molded-in bit holder that is designed to hold any bit/accessory with a standard 1/4″ Base (including Fix It Sticks Torque Limiters), and any 8-32 threaded component.
9. Amazon — Wheeler Engineering 100-Piece Professional Screwdriver Set, $82
⏺️ » Good value with tons of handy tools and major discount
Wheeler’s 100-Piece Professional Gunsmithing Screwdriver Set (#ad) is a great tool kit for gun owners. The bits are made from S2 steel and hardened to 56-58 Rockwell “C”. When designing this big kit, Wheeler’s engineers first measured the screws on over one hundred modern and antique firearms to make sure there are bits that fit a wide range of gun actions, components, and parts systems.
⏺️ » Handy cheap tool for interactive target shooters — fun at long range too
These handy wire target holders can be used for fun short-range pistol shooting and for more challenging rifle shooting at 300 yards and beyond. Clay rifle targets are good for fun local club matches. A 6″-diameter clay pigeon is one-MOA at 600 yards — a serious challenge. These Birchwood Casey Wire Clay Target Holders (#ad) are easy to use. Drive the holder into the ground, slightly open the wire ring, and then insert the clay disc. You can easily set up multiple targets.
As an Amazon affiliate, this site can earn revenues through sales commissions.
When most shooters think of biathlon, they imagine the winter sport which combines cross-country skiing with rimfire rifle shooting. Now there’s a new type of biathlon, a true “run and gun” competition with rifles and pistols. The Gun Run competitors move on foot over natural terrain, with 5-8 shooting stages over the course, typically 5 km (about 3 miles).
The Gun Run is a two-gun, centerfire biathlon. It is designed to test your physical fitness, marksmanship, and equipment. Competitors will carry their rifle, pistol, ammunition, mags and anything they believe they need to complete the course. They will travel over various distances depending on the match — but most often a 5 kilometer marked course consisting of natural terrain, roads, and trails. There will be anywhere from 5 to 8 shooting stages. There are night events, two-person team events, and even a land navigation event where you must use map and compass to complete the course.
The Gun Run is not a CrossFit competition and it’s not USPSA. This is a challenging event that test personal fitness and marksmanship with both rifle and pistol.
How to Participate in The Gun Run Events
Click below for the list of The Gun Run 2025 Events with links to sign-up pages. The next competition is the Gun Run Land Nav slated for May 24, 2025 at DeWitt’s Outdoor Sports in Ellerbe, North Carolina. This is a special, more challenging event. Instead of following a 5k course marked with signs, competitors will navigate an unknown distance course using a map and compass. After, that, the next Gun Run event will be held June 21, 2025 at The Sawmill Training Complex in Laurens, SC 29360.
Origins of The Gun Run
This isn’t a new concept … matches like this originated in Texas 20 years ago and have spread all over the country. Prior to that, Colonial Era Americans would gather on the village green sometimes multiple times a week and conduct close order drill with rifle marksmanship competitions. Shooting is as old a past time for this country as this country is old.
Fitness Challenge
Carrying all your gear in 90 degree weather up and down hills is not easy. Having the best gear and being a good marksman can help but having a level of fitness where you can maneuver with gear on is extremely important. The end result of all of this is improving your training plan. Whether it be physical or on the range, every event you compete in should give you areas to work on. Sometimes new kit needs to be bought but most often it is our fitness that needs the most improvement.
From time to time, we all encounter a primer that doesn’t go off. It’s normal to attribute the problem to a bad primer. But sometimes there are other explanations. George S., one of our Forum members, experienced a couple failures to fire, but he learned that the issue was his priming TOOL, not his primers. Here’s what George told us. There’s a lesson to be learned:
“I had issues with CCI 450s when I had my first 6BR barreled. I had probably three or four out of 20 rounds that failed to fire. the primers were dented but didn’t fire. I called CCI since I had bought a case of them. The tech was decent enough but had the audacity to tell me I was not seating the primers all the way in the pocket. I proceeded to let him know I had been reloading longer than he had been alive and I knew how to seat a primer.
Turns out that I did and I didn’t! I was using the RCBS primer tool I had used for years and the primers felt just fine to me. I finally decided to check the tool and since I had a new one I took the seating pins out and measured them. The seating pin on the tool I had been using for years was shorter by a few thousandths! I then used the pin from the new primer tool and darned if the primers that didn’t seat down to the bottom of the cup.
I switched to a K&M primer tool for seating the CCI primers and have not had a problem since. It was the combination of harder cup and lack of proper seating. I did call the CCI tech back and apologized for being an idiot.”
Another Forum member witnessed a problem cause by misuse of a priming tool: “I did … see a failure to fire on a Rem 9 1/2 primer only a week ago. That was in the new Rem muzzleloader that uses a primed case to ignite the pellets. After watching the muzzleloader’s owner seat his primers, I believe that it was operator error not the primer. He was seating the primer and then squeezing the priming tool so hard that his hands hurt after a few. We got that corrected.”
One of the most popular items in our Shooters’ Forum is the ongoing “Pride and Joy” thread. Since 2009, Forum members have posted photos and descriptions of their most prized firearms. Here are some of the most recent “Pride and Joy” rifles showcased in our Forum. Do you have a gun you’d like to see featured there? Register for the Forum and you can add your favorite gun to the list.
For this week’s Sunday GunDay we’ve selected five fan favorites from the Pride and Joy Archives. First up is a beautiful .284 Winchester with a one-of-a-kind Claro Walnut stock crafted by the owner.
.284 Winchester in Owner-Crafted Claro Walnut Stock
Here is a unique Claro Walnut tactical/practical rig. Notably, the rifle’s owner, Forum member CStuck, built the handsome stock himself: “I crafted the stock, installed the Remage barrel, pillar-bedded the rig, and put all the pieces together.” Key components for this wood-stocked beauty include a Defiance Tenacity RH Long Action mated to a McGowen 28″ Heavy Palma 1:9″-twist barrel chambered for the .284 Win GAP. The scope is a Burris XTR II 5-25x50mm in an MPA BA Mount. The trigger is a Timney HIT. The rifle feeds from a Hawkins DB magazine.
6BRA with BAT Action, Brux Barrel — The Blue Beauty
Next is a blue 6BRA beauty from Forum Member RiflePainter: “This is my brand new 6BRA Light Gun built by Jason Danley at Danley Precision! Jason did all of the work including paint. Brass was done by Darrel Jones at DJ’s brass service.” This features a Johnny Byers stock painted in HOK Custom Oriental Blue Candy mix. The action is a BAT DS Left-load, Right-eject, Right bolt fitted to a 1.5 oz. Jewell trigger. The barrel is a 28″ Brux HV 1:8″-twist chambered for the 6BRA (6mmBR Ackley) and fitted with a Harrell’s radial muzzle brake. On top is a Sightron SIII 10-50x60mm optic riding in BAT 1-piece scope rings.
Eye-Catching 30 PPC — 13-YO Grandson’s First Competition Rifle
We like this project because it connects a grandfather with his grandson. These family connections are very important. Forum member 20PPC posted: “Here is my 13-year-old grandson Remy’s first competition rifle. We just finished it up.” The rifle is chambered for a 30 PPC with a 1:17″-twist Lilja HV barrel fitted with an Ezell tuner up front. The action is a Stolle Panda RBLP, Right Eject fitted with a Kelbly trigger. The stock is a Robertson JTR model wearing a very snazzy finish, which looks like many coats of clear over an orange/gold hydro-dip (we think). On top is a 45X Sightron fixed-power scope. This eye-catching grandson’s rig will definitely get noticed at the range.
Click image for full-screen view.
Twin Grendels with Handsome Wood, One with Home-made Tuner
Here are a pair of 6.5 Grendel bolt-action rigs. Forum member Ramblerman posted: “The Twin Grendels are finished! My buddy Tom did the wood and I did the metal — more testing this weekend. Mine now sports a tuner I made (see bottom photo).”
6BRA in Green Wheeler Stock with Krieger Barrel
Last but not least, here is a serious IBS/NBRSA Light Gun for 600/1000-yard competition, owned by Forum member “6.5×47″. Chambered for the ultra-accurate 6BR Improved (aka 6BRA), this rifle features a polished BAT ‘B’ action with roller upgrade. The action is mated to a 28″ Krieger 1:7.5″-twist HV barrel. The 6mm Krieger is chambered for .272″ case-neck, with .115″ freebore. The BAT action is glued and screwed in an Alex Wheeler stock with green candy paint. Note the wide fore-end with side plates and the adjustable stock keel in the rear. Another advanced feature is a slick removable weight system in the butt stock. A Jewell benchrest trigger resides inside a BAT trigger guard.
Know the Rules
