Did you know you can damage your hearing even if you are wearing the best hearing protection available? Well, have you ever heard of concussion (or concussive) hearing loss? There is no amount of anything you can put in or over your ears to protect you from concussion loss. My audiologist explained to me the concussion comes through the facial bone structure and damages the ear’s tiny bones.
Editor’s NOTE: This may be the most important tech article we’ve run all year. It explains how you can suffer inner ear damage and hearing loss even if you use earplugs or muffs. Read that again — hearing loss even with typical hearing protection. This kind of concussive hearing loss can result from shooting with muzzle brakes in confined spaces. Using a suppressor (aka sound moderator) can reduce the risk of concussive hearing loss. You may not have the ability to use a suppressor, but this article explains how you should be more mindful of your hearing.
Why I Use a Suppressor (Preventing Concussive Hearing Loss)
It must have been the road noise. I thought I was having a hard time hearing my five year old daughter speaking to me on my cell phone because of the road noise. That old SUV was kind of loud inside. Until I switched the phone to my left ear and suddenly I could hear her just fine. Wait, what just happened? I moved the phone back to the right ear and there was that muffled voice again. That’s when I knew I had a problem.
“What?” Lots of us in the shooting community have lost some hearing along the way due to our time on the range or in the field. Those of us who hunt have certainly discharged a firearm or three without ear protection and without concern for our hearing. After all, it’s just one shot, right? How much can it hurt?
Actually, that one shot DOES hurt your hearing. Any sound over 140 dB is immediate hearing loss. It just happens to be killing a small amount of our hearing so most of us continued the practice without a care. Living with hearing loss now makes me wish I could go back 20 years and better protect my hearing. I can’t change what I did in the past, but going forward I can certainly do the most to protect the hearing I still have.
I decided to shoot about a year’s worth of matches with just braked rifles. That year is when I lost significant hearing in my right ear and some in the left. I’ve gone back to shooting only suppressed rifles whenever possible.
I shot my first suppressed firearm, a .22 LR pistol, in 2003. After a few rounds I wondered why everyone (who can do so legally) didn’t shoot suppressed? No one drives without a muffler. Why would you? Point is I immediately appreciated the hearing protection benefits of suppressors. That passion got me into the business of selling suppressors and it wasn’t long before I was one of the biggest retailers for companies like AAC, SWR, SilencerCo, Ops Inc. and others. [Editor: The author’s business, Accurate Ordnance, no longer sells suppressors. So this article is NOT a sales pitch. Mark just wanted to share his experience so others might protect their hearing.]
Did you know you can damage your hearing even if you are wearing the best hearing protection available? You’ve heard guys say, “I’ll wear plugs and muffs, so I’ll be just fine shooting that .50 BMG!” Well, ever heard of concussion (or concussive) hearing loss? Yeah, I hadn’t either. I’ll sum it up the way the last audiologist I spoke with about my hearing loss did – there is no amount of anything you can put in or over your ears to protect you from concussion loss.
A hand grenade went off right next to a buddy of mine. He lost some hearing as a result of the blast. No one is really surprised by that. I mean it is an EXPLOSION. It’s loud. Duh. But I had no idea the blast from a muzzle brake could basically hurt my hearing the same way. The doctor explained to me the concussion comes through the facial bone structure and damages the ear’s tiny bones. Same thing as what can happen through any TBI (traumatic brain injury).
I’ve owned quite a few different suppressors over the years and have shot just about everything out there. I’m still as big a fan as ever. However, I wanted to see if using a suppressor in PRS (Precision Rifle Series) and similar matches was actually a hindrance. Some people feel the added length and weight of a suppressor can make getting into some shooting positions slower or problematic. So I decided to shoot about a year with a muzzle brake instead of a suppressor. I sure regret that decision…
Getting Headaches at PRS Matches Was Warning Sign
It is fairly common in PRS matches to shoot through pipes, vehicles, inside “shoot houses” and around other obstacles that echo a rifle’s blast. I noticed I was starting to get headaches about halfway through a day of PRS match shooting. I knew the issue wasn’t hydration. I mean look, if you are peeing every other stage down at the amazing CORE range facility in mid-summer you are NOT dehydrated. So, what was causing the headaches? It wasn’t until I went back to shooting suppressed in those same environments that it became clear the little mini concussions from that muzzle brake was causing my headaches. And of course the doctors confirmed that.
Let me stop here and say I am NOT anti-brake. Muzzle brakes are useful tools and for some situations are the best tools. An aggressive brake can be more effective at reducing recoil than a good suppressor. A suppressor does add some recoil reduction, just not as much as most quality brakes. Don’t forget to factor other variables, such as caliber and rifle weight, into the equation though. For example, a 15-lb 6mm Creedmoor rifle doesn’t need much recoil reduction in the first place.
So, I started shooting matches long before the PRS even existed and always shot suppressed in those days. The suppressors made communication with a partner or RO easier and it was just a more pleasant shooting experience. On the recommendations of a few people I decided to shoot about a year’s worth of matches with just braked rifles. That year is when I lost significant hearing in my right ear and some in the left. I’ve gone back to shooting only suppressed rifles whenever possible and especially at matches. I’ve only once or twice found the extra length of the suppressor made it a little more inconvenient to run a stage, but not by much. Trust me, the points I missed were not because I took two extra seconds getting the muzzle in a port or window.
My hearing is something I value and will do everything to protect from this point forward. You’ll never again see me on a match field with an un-suppressed rifle. To me the minimal gains of running a braked rifle aren’t worth losing more hearing.
Choosing a Suppressor — What to Consider
Okay, so I have hearing loss that I can’t get back and realize I need to go back to shooting matches with a suppressor. But which one? I’ll still be shooting matches with custom fit plugs so I just need something to add a little recoil reduction and kill that concussion.
At our shop, Accurate Ordnance, we generally recommend direct-thread suppressor solutions to our customers. The main reason for that is all the problems we’ve seen with other fast-attach muzzle devices. It doesn’t take much tolerance stacking to result in accuracy issues. There are a few exceptions for us and the Rugged Suppressors products top the list. Since the Razor 762 uses a muzzle brake adapter on the rifle to attach the suppressor, I can use the same suppressor on my .223 Rem training rifle. My primary match rifles are chambered in 6mm Creedmoor and 6.5 Creedmoor and the muzzle threads on those is a standard 5/8×24. My .223 Rem training rifle has .5×28 threads on the muzzle, which is standard for that caliber. Thus, the muzzle adapter interface lets me share the suppressors between all the rifles. And on that .223 Rem training rifle I have the option of switching the end cap on any of the Rugged products to a .223 aperture size, which makes the suppressors slightly more sound efficient (meaning quieter).
Running out of space in your gun safe? Here’s a clever product that will allow you to store more long guns in your current vault. The plastic Rifle Rods from Gun Storage Solutions slip in long-gun barrels and then grip the shelf above using Velcro pads. This allows you to nestle your rifles and shotguns much closer together than with the conventional racks provided with most gunsafes. The rods are offered in bright orange or basic black. We prefer the safety orange rods (shown above with the Velcro “receiver” shelf liner provided with the Rod Kit).
Rifles with narrow furniture (such as lever guns) can be placed very close together, saving lots of space. For benchrest or varmint rifles with wider fore-ends, you won’t benefit as much. Note that, in the photo above, all of the guns are fairly slim — none have wide fore-ends. Still we think these Rifle Rods could open up 12″ or more horizontal clearance in a medium-sized safe — that could easily allow you to store six (6) more guns in two rows, as shown.
Rifle Rod Kits Starting at $34.50
A kit with 10 Rifle Rods and loop fabric shelf liner costs $34.50 on Amazon.com, while the 20-Rod Kit with liner costs around $55.00. That’s a lot cheaper than buying a new safe. A six-pack of additional black Rifle Rods costs $15.25 on Amazon. NOTE: To get the safety orange rods you may have to pay a few dollars more and order directly from Gun Storage Solutions.
WARNING: Always REMOVE Rod from barrel before taking gun to the range. Never place live ammunition in a gun with storage Rod in the barrel!
Product tip from EdLongrange. We welcome reader submissions.
The Everyday Sniper Podcast is a streaming audio series about long range shooting, precision rifles, firearms, training, and industry updates. The podcast is a joint effort of Sniper’s Hide and Mile High Shooting. Podcast host Frank Galli is well known to precision shooters. Frank, a military veteran, is the founder of Sniper’s Hide, and he regularly tests tactical rifles and related equipment. He also runs the Sniper’s Hide Team Challenge each year. This year’s Challenge runs June 1-3 in Washington State.
For the Everyday Sniper podcast, Galli has brought together firearms industry experts, top gunsmiths, and ace shooters. They share their knowledge and on-the-range experience. You’ll find a wealth of information on tactical and long-range gear, plus tips on PRS competition and more.
Here are the three latest Everyday Sniper podcasts:
This episode include Seekins After Action Report along with Glen Seekins interview. Frank notes: “During my ride back from Idaho I talk about my trip to Seekins Precision and then follow it up with my interview where we talk about Glen’s history and his six degrees of separation between Sniper’s Hide and Seekins.”
Click to launch Podcast on Everyday Sniper Website:
Everyday Sniper Episode 46:
Magpul Pro 700, Bedding Chassis, Wind Video and more
April 17, 2018
Welcome to the Everyday Sniper Podcast. Frank here, Mike is at MHSA working the counter. In this episode we talk about the new Magpul Pro 700 Chassis, and the KRG Bravo Chassis. Other topics include: Wind Video, Technology Sucks, Suppressor Follow-up, Busted Shoulder.
Click to launch Podcast on Everyday Sniper Website:
The Everyday Sniper Episode 45:
Tripods, Truing, and Terrain
April 15, 2018
Mike and Frank return with Part Two of weekly recap conversation. In this episode, they expand on key points of the previous episode, and cover some additional topics:
Tripod Shooting – RRS
Positions with Tripod
Training getting in and out of position
Getting closer vs shooting subsonic
Seekins Precision Rifles
RRS Dovetail Accessories
SP10M vs SP10
AA Targets Truing Targets
We frequently receive inquiries about compact self-defense pistols. Many folks (some of whom already own a full-sized pistol) ask: “What’s a good compact 9mm pistol I can carry or keep in a vehicle during trips?” Of course, there is the Glock 19. And the new Sig Sauer P365 is quite good. But they are both around $500.00. You can spend about half that and still get a very good 9x19mm pistol with lifetime warranty and good ergonomics.
Here are three 9mm handgun options, all available now for well under $300.00. In fact, our third choice, the Ruger EC9, is currently just $209.99 at Brownells (with promo code). That’s just a few bucks over two hundred! It’s a buyers’ market right now…
1. Walther Creed 9mm Pistol, $269.99
The Walther Creed offers excellent ergonomics, good accuracy, and well-designed controls at a killer price — $269.99 at CDNN Sports. This gun, designed to be a value-leader, emulates Walther’s more expensive PPQ model (MSRP $649.00) at a much lower price. The Creed’s frame size and shape is the same as the PPQ, but the Creed lacks interchangeable backstraps. Slide and trigger are very similar. The Creed features a snag-free bobbed hammer. Testers have praised the new Creed, saying that, despite the bargain price, it “sacrifices little to nothing in… ergonomics, accuracy, and reliability.”
2. Smith & Wesson SD9VE 9mm, $249.99 with CODE M8Y
The two-tone Smith & Wesson SD9VE 9mm pistol features contrasting stainless-steel slide and barrel. Weighing just 22.7 oz, this DAO pistol ships with two 16-round magazines, offering plenty of fire-power. Overall length is 7.2″ with a 4″-long barrel. Both front and rear sights are drift-adjustable. This is a nice medium-sized pistol that shoots well. The Smith & Wesson SD9VE is on sale now at Brownells. Sale price is currently $259.99 with a $10 handling charge.
SAVE MORE: During check-out at Brownells.com, you can use code “M8Y” to receive $20 Off and get FREE delivery. That lowers your net cost to just $249.99 shipped to your FFL. Under $250.00 for a nice S&W Nine is a great deal.
3. Ruger EC9 9mm — $209.99 at Brownells with CODE M8Y
The striker-fired Ruger EC9 features a 3.12″ barrel and measures 6.0″ overall. This 1.07-lb EC9 is slim for easy concealment. Weighing just 1.07 lbs., this is definitely an “all-day carry” option. With Brownell’s current sale pricing and promo codes, you can get this little pistol for just $209.99 delivered (see right). You heard that right. Sale price is currently $219.99 with a $10 handling charge. However, during check-out you can use code “M8Y” to receive $20 Off and get FREE delivery. That lowers your net cost, so that your all-up price, delivered to your FFL, is just $209.99. That’s a great price for a reliable gun backed by Ruger. Here is a recent review from verified buyer: “It’s an LC9 with fixed sights that are milled into the slide. Same trigger. Same frame. Sweet shooter. Perfect for concealed carry. Can’t beat it for the price.”
Many shooters these days clean their cartridge brass ultrasonically, or wet-tumble their cases with stainless media (above). Both methods get brass clean and shiny, inside and out. However, when those wet-cleaning processes are completed, you’re left with a pile of soaking wet brass. How do you dry your brass quickly and efficiently, without unsightly water spots? Read on for some great answers…
In our Shooters’ Forum, Forum Gold Member Terry asked: “How do you dry your brass after Ultrasonic cleaning?” In an interesting Reloading Forum Thread, many smart suggestions were posted. A dozen fellow members outlined a variety of effective case-drying procedures, which work equally well for both wet-tumbled brass and ultrasonically-cleaned cases. Here are the Top 10 brass-drying suggestions from our Forum members.
TOP TEN Ways to Dry Cartridge Brass After Wet Cleaning
1. Food Dehydrator — Shake the brass in towel to get the bulk of water off. Next leave in the food dehydrator for 45 minutes or until there are no signs of moisture inside the cases. — Lawrence97
2. Lyman 5-Level Case Dryer — Rinse off cleaning solution(s), then load brass by type into racks in Lyman Cyclone Case Dryer. This is easier to load/unload than food dehydrators and holds more cases.
3. Hot Water + Compressed Air — Rinse all your cases as a batch using scalding hot water from the kitchen sink. Hot water evaporates off of brass very very quickly. Then hit them with compressed air. Takes 10 minutes. Simple. — SG4247
4. Oven Dry in Pre-Heated Oven — After pre-heating to 200° or so, turn off oven and put brass inside on a tray. Most important! Tell your wife what you are doing so she doesn’t crank it up to 425 to heat pizza! — MClark
NOTE: Many other members suggested oven drying at 150-200°. We recommend turning OFF the oven so you don’t cook your brass if you forget to remove the cases.
5. Towel Dry then Warm with Heat Gun — Roll brass in a towel until no more water shakes out. Lay out on cardboard box top and blow off with Harbor Freight heat gun. $9.99 on coupon. Two minutes of heated air and about half hour of wait and they are good to go. This is with primers removed. — Shaggy357
6. Compressed Air, then Sun Dry Outside – I rinse the brass, then blow them out with compressed air. Then, dependent on the time of year, lay them on a towel in the sun. — HogPatrol
7. Dishwasher on Dry Cycle – In the winter, I drop my wet brass cases neck-down on the rack pegs in the dishwasher, then turn on the dry cycle. In the summer…well, I’m in Texas. They go to the porch for a bit. — Toolbreaker
8. Alcohol Rinse then Air or Oven Dry — Rinse in 90% Isopropyl alcohol and either let air dry or stick in 175° oven for half an hour. Alternatively, use a dehydrator. — Zipollini
9. Slow Air-Dry in Loading Blocks — I have a reloading block with holes drilled in it. I simply load the block up and let it air-dry in the cupboard for a couple of days. — JCS
10. Wipe with Towel Then Anneal Normally — This thread is stirring my OCD side. Seems complicated for just drying — my brass dries just fine when I anneal it. This entire process can’t take an hour per batch. When finished, the brass is cleaned, annealed, and ready to size. — CHLuke
Deprime, then tumble brass with stainless media, water, Lemishine, and dish detergent.
Shake them easily in a strainer to knock out most media then grab 4-5 pieces, shake them over the bucket for the last of the media then inside a towel.
Finally blow out the primer pockets and wipe with a towel, load in the Annealeez.
Most of our readers are rifle guys, but it’s fun to shoot a pistol match now and then. You don’t need a lot of equipment, and if you shoot IDPA (Int’l Defensive Pistol Assn.) matches, you can really win with a $400 pistol and $20.00 worth of bulk 9mm ammo. That’s a bargain compared to what you’ll spend on a competitive PRS or F-Class rig and custom hand-loads.
This Editor got his start in competitive shooting with local IDPA matches. I shot a Glock 34, and a SIG Sauer P226, and even did one match with a S&W Snubbie. I eventually settled on the SIG, as it fit my hand better than the Glock, was more accurate, and was every bit as reliable. The P226 also pointed better than the Glock for me — something that helps with target acquisition.
If you want to get into the IDPA game, Shooting Sports USA has a good article that explains the basic rules and classifications. IDPA is not your grandad’s bullseye pistol match. There is movement and action. Stages are timed, and competitors engage targets from cover if available. Singled-handed shooting is sometimes required, as is shooting while moving. You can compete with pretty much any handgun suitable for self-defense — but no $4000 Raceguns with fancy optics. The fact that you can be 100% competitive without spending a ton of money is what makes IDPA so popular.
Shooting Sports USA polled IDPA shooters at the 2016 IDPA Nationals to determine their favorite gun brands and models. The #1 choice was the 9mm Glock 34 for the SSP (Standard Service Pistol) and ESP (Enhanced Service Pistol) Classes. Next most popular was the Smith & Wesson M&P Pro.
Along with SSP and ESP, there are three other main IDPA classes: Custom Defensive Pistol (CDP) for .45 ACPs (mostly 1911 types), Concealed Carry Pistol (CCP), and Revolver (REV). All classes have a minimum power factor. Scores are based on time and shot placement on the IDPA target.
IDPA Scoring System
The official IDPA Target (right) has multiple scoring zones. If you don’t hit the target’s center mass zone or head zone (both appear green in illustration), you drop one or three points. Here’s the formula: Score (in seconds) = Time + Points Down + Penalties. In IDPA, “points down” (and penalties) are added to your time. If you hit the outer edge of the target, you get 3 points down. Nearer center can be 1 point down. Center hit or head shot is 0 points down. See IDPA Scoring for Dummies.
Five Tips for New IDPA Shooters
1. Dry-Fire Practice at Home
You can improve your grip and sight acquisition dramatically with 30 minutes of dry-firing every week. Get some quality snap caps and go to it. One tip — don’t do this in your back-yard if the nosy neighbors can see. We had one friend who was dry-firing in his yard and got an unexpected visit from the local police (with guns drawn). That can turn out badly to say the least…
2. Practice One-Handed Shooting (Both Strong-Hand and Weak-Hand)
Most of the worst misses I saw during IDPA matches were during stages requiring one-handed shooting. A lot of pistol shooters have spent all their time shooting two-handed. That’s the best technique, but in an IDPA match, you may be required to shoot one-handed. If you’re a righty, shooting with the left hand only will feel really weird, and your accuracy will be poor unless you practice. We suggest starting your one-handed training with a rimfire pistol, then transition to your centerfire pistol.
3. For 9mm, Don’t Bother to Hand-load Your Ammo
This may seem like sacrilege, but if you’re only shooting one match a month, it’s probably not worth the time and money to reload 9x19mm. I did reload my 9mm ammo on a progressive for a couple years. After looking at money and time, I just started buying commercial 9mm reloads which worked fine. I was only saving a few cents per round by reloading, and that wasn’t worth the time invested.
4. Get a Good Holster That Fits Right
In IDPA matches you normally draw from holster during the match. I saw a lot of people struggle because they had Kydex holsters that would not release easily, or leather holsters that fit too tight or rocked during draw. Try a few different brands at the local store.
5. Be Smooth, Be Calm, and AIM Your Shots
Many folks come into IDPA thinking it’s all about speed. But there are score zones on the official IDPA target, so you need to focus and AIM. Don’t just “run and gun”. If you stay calm, align your sights in the center of the target for EVERY shot, you will end up with a higher score with fewer “points down”. Speed will come with time. It is better to make sure each one of your shots is a hit.
While the mainstream media attacks gun owners and blue state politicians demand new anti-gun legislation, the fact remains that the firearms industry is more important to the American economy than ever. CNN and MSNBC won’t tell you that the American firearms industry is very healthy, enjoying huge growth in the last decade.
In fact, Americans are buying more guns than ever, and spending more money on firearms accessories and ammunition, according to a National Shooting Sports Foundation (NSSF) report.
The total economic impact of the firearms and ammunition industry in the United States increased from $19.1 billion in 2008 to $51.4 billion in 2017, a 169 percent increase. In addition, the total number of full-time equivalent firearms industry jobs rose from approximately 166,000 in 2008 to almost 310,000 in 2017, an 87 percent increase.
On a year-over-year basis, the industry’s economic impact rose from $51.3 billion in 2016 to $51.4 in 2017, ticking higher even while the industry came off-peak production years. Total jobs increased from approximately 301,000 to almost 311,000, a 3 percent increase in the same period.
Firearms Industry Tax Receipts Fund Conservation Programs
“Our industry is proud to be one of the truly bright spots in our economy as an unprecedented number of Americans have chosen to exercise their fundamental right to keep and bear arms and to safely enjoy the shooting sports,” said Stephen L. Sanetti, NSSF President and CEO.
“We have increased our direct workforce by more than 7,000 in the past year alone, adding jobs that pay an average nearly $50,000 in wages and benefits. In addition, since 2008 we increased federal tax payments by 144 percent, Pittman-Robertson excise taxes that support wildlife conservation by 104 percent, and state business taxes by 121 percent.”
The Firearms and Ammunition Industry Economic Impact Report: 2018 provides a state-by-state breakdown of job numbers, wages and output covering direct, supplier and induced employment, as well as federal excise taxes paid.
Decorated U.S.M.C. veteran, competitive shooter, and actor R. Lee Ermey has passed away at age 74, due to complications from pneumonia. Known to friends and movie fans as “The Gunny”, Ermey will be missed. He was the real deal who exemplified the Marines’ motto: “Semper Fi” (Always Faithful). Earning fame as the Drill Instructor in the Hollywood movie “Full Metal Jacket”, Ermey appeared in over 70 films along with popular television series*. Even after becoming a famous actor, Ermey remained a serious marksman, shooting at Camp Perry and other venues with friends such as fellow Devil Dog Dennis Demille and Hornady’s Dave Emary.
Ermey won a Golden Globe nomination for his signature performance in “Full Metal Jacket”. That launched a new career as a Hollywood actor. Ermey eventually appeared in dozens of popular movies, including “Se7en,” “Prefontaine,” and “Toy Soldiers.” He also hosted successful cable television shows — the “Mail Call” and “Lock N’ Load with R. Lee Ermey” series on the History Channel, followed by “Gunny Time” on the Outdoor Channel.
R. Lee Ermey was a competitive shooter. This photo shows Dave Emary (left) and Ermey (right) shooting the Vintage Sniper Team Match at Camp Perry. (Photo: NRA Blog)
Philip Schreier, NRA Senior Museum Curator, said Ermey’s “support for the U.S. military was legendary, in particular, the Young Marines program, as well as his advocacy for veterans and their treatment at VA Hospitals.” (Read More). Ermey’s friend Bill Rogin said that “He will be greatly missed by all of us. Please support your men and women in uniform. That’s what he wanted most of all.” Rogin noted that while Gunny’s characters were often hard and principled, the real Ermey was a family man and a kind and gentle soul who supported the men and women who serve. (Source: Fox News Report).
A member of the NRA Board of Directors and a staunch supporter of the Second Amendment, Ermey spoke to Fox News in 2016 about being “blackballed” from Hollywood over his political views. “I’ve had a very fruitful career. I’ve done over 70 feature films,” he said. “I’ve done over 200 episodes of [History and Outdoor Channel Television Series shows]”.
Born in Kansas, Ermey joined the USMC right out of high school, enlisting in the Marine Corps in 1961 at age 17. He served for 11 years, including 14 months in Vietnam, before being discharged in 1972. Ermey began his Hollywood career in 1979 as a technical adviser to Francis Ford Coppola, working on the Vietnam War film, “Apocalypse Now”.
Here are some comments from our Forum members, many of whom knew Ermey personally or met him at shooting matches:
“It is a sad day to lose someone who did so much for children behind the scenes. He was a great guy and a patriot. Semper Fi Gunny — may you rest with our lord Jesus Christ.” — J. Bearman
“I shot a mid-range match at Camp Pendleton where he and Donald Jr. were shooting on a team with Dennis Demille. They were pretty sharp! Nice guys every one. Sorry to see R. Lee go so young.” – Watercam
“29 Palms CA, I had the the pleasure to meet and shoot with Gunny Ermey. First class, all the way… Semper Fi and Godspeed Gunny.” — BPD 459
U.S. Marine Corps Service History
In 1961, at age 17, Ermey enlisted in the United States Marine Corps and went through recruit training at Marine Corps Recruit Depot in San Diego, California. For his first few years, he served in the aviation support field before becoming a drill instructor in India Company, 3rd Recruit Training Battalion, at Marine Corps Recruit Depot San Diego, where he was assigned from 1965 to 1967.
Ermey then served in Marine Wing Support Group 17 at Marine Corps Air Station Futenma in Okinawa, Japan. In 1968, he was ordered to Vietnam with MWSG-17, and spent 14 months in country. The remainder of his service was on Okinawa where he was advanced to staff sergeant (E-6). He was medically discharged in 1972 because of several injuries incurred during his service. On May 17, 2002, he received an honorary promotion to gunnery sergeant (E-7) by the Commandant of the Marine Corps, General James L. Jones.
Commendations: Republic of Vietnam Gallantry Cross, Meritorious Unit Commendation
* Many biography statements say Ermey has “over 60″ film credits. Ermey himself told Fox News he appeared in “over 70 feature films”, so we use that number.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
This week will be a little different. Our First Five Products all come from Bullets.com. The reason is simple — Bullets.com is closing up shop, selling off its inventory. The items we list are all insanely good deals — many below cost. When was the last time you saw a premium Hodgdon powder for under $15 per pound? Or complete Redding die sets for under $50? Some of the product lines will still be carried by Grizzly.com, but bullets, brass, powder, and ammo inventories are being liquidated along with many reloading products and gunsmithing tools. You’ll find huge discounts on many top-tier products.
Here’s your chance to save big bucks on quality tools, shooting gear, and reloading components. Guys — take note: this is a unique opportunity to pick up some great products at truly rock-bottom prices. But remember this is an inventory close-out sale, limited to stock on hand. When it’s gone, it’s gone. Don’t say we didn’t warn you!
1. Bullets.com — Hodgdon, Alliant, VV Powder — Up to 50% Off
Right now, Bullets.com has the best prices we’ve seen in a decade on some Hodgdon and Alliant powders. Vihtavuori fans will be happy too. NOTE: Over 28 powder types on are liquidation sale now — we just picked three to feature here. But you can see all sale powders on the Bullets.com Powder Page.
2. Bullets.com — Premium Bullets — Up to 50% Off
There are some great deals to be had here. Sierra’s latest High-BC 7mm Matchkings are available at huge discounts. And the superb Lapua Scenar-L bullets are offered too. These are some of the most consistent bullets we have ever tested. NOTE: Hundreds of bullet types from Berry, Lapua, Nosler, Sierra, and Speer on are liquidation sale now — we just picked three to feature here. But you can see all sale bullets on the Bullets.com Bullet Page.
3. Bullets.com — Redding Die Sets — Up to 65% Off
Need high-quality dies for rifle or pistol reloading? Look no further. Bullet.com’s prices on Redding die sets can’t be beat. NOTE: Over 500 die sets or individual die types are on sale at killer prices — get a $40 sizing die for under 15 bucks. See all the die offerings on the Bullets.com Reloading Die Page.
4. Bullets.com — Norma Hunting Ammunition — Up to 65% Off
Bullets.com is liquidating a wide selection of loaded ammunition. You’ll find pistol, rifle, and shotgun ammo from CCI, Federal, Hornady, Lapua, Norma, Nosler, Sellier & Bellot, and Winchester (plus other brands). The Lapua ammo is some of the very best you can buy at any price. Rimfire fans will love the SK and Norma Rimfire ammo on sale. Here we feature three examples of Norma’s superb hunting ammo. You will find 120+ other ammo types on the Bullets.com Ammo Sale Page
5. Bullets.com — Shooting Rests — Up to 62% Off
Along with Ammo, Powder, Bullets, and dies, Bullets.com has many shooting accessories on sale. We’ve always liked the Bald Eagle Slingshot rest (with adjustable windage), and now you can get this for a fraction of the original cost. Equipped with a good front bag (sold separately), this rest is good enough for competition, and it is an excellent front support for load testing. Check out other shooting rest products on the Bullets.com Shooting Rest Page.
6. Whittaker Guns — Howa Mini Action .204 Ruger — $349.99
Oh heck — this is hard for a Varmint hunter to resist. You can get a complete Howa .204 Ruger rifle for $349.99 — about the price of a replacement barrel blank for a Remington. This little gem has a very smooth, short-throw Mini Action with Howa’s excellent two-stage trigger. The .204 Ruger chambering shoots fast and flat, and is a fine choice for prairie dog work. Yes we’d prefer a heavier barrel for extended shooting sessions, but this is still a great price on a fine little rifle.
7. Amazon — Jiallite Scope Bubble Level, $11.99
If you shoot long range, you need a scope level. This nicely designed Jiallite Scope Bubble Level is fully CNC-machined to close tolerances for a good fit. It features a 30mm milled inside diameter, plus an inner insert ring so it will also fit 1″-diameter main tubes — that dual-diameter versatility is a nice feature. We also like the way the unit is nicely radiused, and has a low profile in the middle. User reviews have been very positive. You could easily pay $35.00 or more for a 30mm scope level. Purchasers have praised this product — almost all verified buyers have rated this five stars.
Get a Ruger Precision Rifle in 6mm Creedmoor for $879.00. That price is about $100-$120 less than other vendors, so this is a good deal. If you’ve been thinking of purchasing a Ruger Precision Rifle (RPR) chambered for the 6mm Creedmoor cartridge don’t hesitate. GrabAGun is offering this popular tactical rig for $879.00. The 6mm Creedmoor chambering shoots faster and flatter than the 6.5 Creedmoor — so many PRS guys have switched to it. This Ruger is a good choice for the PRS production class. This is the Gen 2 RPR with upgraded handguards. NOTE: GrabAGun’s price has changed four times in the last 48 hours, ranging from $843.15 to $879.00. It may be lower than $879.00 when you read this.
9. Midsouth — Hornady BTHP Varmint Bullets, $52.29 for 500
Need a boatload of bullets for varmint safaris, or high-volume .223 Rem training sessions? Then check out this deal from Midsouth Shooters Supply. Right now you can get 500 .22-Cal 62gr BTHP bullets for $52.29. That works out to just $10.46 per 100 bullets. You can also get 250 for $28.29. If you have high-volume applications for .224-diameter projectiles, this deal is hard to beat. You could easily pay two times as much (per hundred) for similar bullets elsewhere. Buying in bulk saves big bucks.
We use 1″-diameter Target Spots for sight-in and practice at 100-300 yards. These bright red/orange self-adhesive dots are easy to see. At 100 yards the high-contrast black diamond centers provide precise aiming points. We found this 10-pack of target spots on Amazon at a rock-bottom price. You get 630 total stick-on dots for just $9.65 with FREE Shipping. You can also get 360 Birchwood Casey 1″ dots from Midsouth for just $3.15, but shipping is extra. If you’re already ordering something from Midsouth, you may want to add the dots to your order.
So many options… How do you select the shooting discipline that’s best for you? Of course, “Fun is number one”. But you also need to consider cost — the “bang for the buck”. Or in more scientific parlance, the “Fun to Cost Ratio”. Yes, shooting a .50 BMG is fun, but you could be spending as much as $5.00 per round for factory loads! By contrast, your cost per shot in a rimfire fun match might be well under ten cents, as decent ammo can be easily found for under $5.00 per 50-count box. Five bucks per box (of fifty) sure beats five bucks per round!
We believe in the benefits of rimfire cross-training. With a rimfire rifle that has the same ergonomics and “feel” as your centerfire rig, you can practice more often and more affordably. You can get decent rimfire ammo now for as little as seven cents per round*. Compare that to centerfire factory ammo at $1.40/round or handloads for about $0.70 (bullet, primer, powder, and brass depreciation). So even your handloads could cost TEN times as much as pretty good rimfire ammo. That’s an order of magnitude boys and girls.
For a tactical cross-trainer, you want a rimfire rig that feels like your centerfire rifle. McMillan now offers a stock that fits the bill. McMillan’s new A5-22 stock shares the same look and feel as McMillan’s popular A5 centerfire stock. The A5-22 is able to accommodate 10/22 type actions including KIDD 10-22 models with rear tang attachments. McMillan says: “The A5-22 is dimensionally the same as our standard A5 with some minor changes in the tang and floor plate areas. It is available in a fixed comb configuration or with an adjustable saddle-type cheek piece.”
A used Biathlon trainer works great for rimfire practical matches. This is the Anschutz Model 64-R. Note magazine caddy on forearm. This rifle was a dream to shoot.
Targets for Rimfire Training and Fun Matches
Here’s a rimfire training target with “big to small” target circles. Start with the largest circles, then move to the smaller ones in sequence. This systematic drill provides increasing challenge shot-by-shot. Novices often are quite surprised to see their accuracy improve as they move from bigger to smaller aiming points. That provides positive feedback — always a good thing.
Right Click and “Save as” to download printable PDF versions of target.
Rimfire Practice Targets
SPECIAL BONUS–Rimfire Tactical Precision Targets
These FREE targets by DesertFrog are offered in Adobe Acrobat format for easy printing. CLICK HERE to download all six targets as a .ZIP archive.
Game Theme Commercial Targets — Fun and Colorful
Here are some colorful commercial fun targets, well-suited for rimfire practice. These game-theme targets from Champion should be very popular with kids. You can blast aerial drones, hunt dinosaurs, play a game of “H-O-R-S-E”, or shoot ducks in a Carnival Shooting Gallery. These targets, which cost $5.45-$5.95 per 12-pack, are ideal for younger shooters in your family (and fun for grown-ups too).
* We recently scored 1500 rounds of Norma Match-22 ammo for $99.99 from MidwayUSA. That’s 6.6 cents per round! That deal is gone, but there are other bargains to be found. Use WikiArms.com to find .22LR rimfire ammo bargains.
The striker-fired 
5. Towel Dry then Warm with Heat Gun — Roll brass in a towel until no more water shakes out. Lay out on cardboard box top and blow off with Harbor Freight heat gun. $9.99 on coupon. Two minutes of heated air and about half hour of wait and they are good to go. This is with primers removed. — Shaggy357
Along with SSP and ESP, there are three other main IDPA classes: Custom Defensive Pistol (CDP) for .45 ACPs (mostly 1911 types), Concealed Carry Pistol (CCP), and Revolver (REV). All classes have a minimum power factor. Scores are based on time and shot placement on the IDPA target.
