In this video, Bryan Litz of Applied Ballistics focuses on training. Bryan says that training is key for success in Long Range shooting: “Training in the sense that you want to want to refine your fundamentals of marksmanship — your sight alignment, your trigger control. You should practice those things enough that they become second nature and you don’t have to think about them. Keep in mind, it’s not just good enough to train, you have to learn how to train. You need to learn how to practice effectively, to get the most out of everything you do.”
Bryan says that success in Long Range shooting is not just about the hardware. It’s what’s between your ears that really counts: “The most important element in Long Range shooting is your knowledge — your understanding and practice of fundamentals of marksmanship, as well as your understanding of ballistics. You have to be able to fire the rifle, execute good shots that will put your rounds on target, but you also need to make intelligent sight corrections that will accurately account for the effects of gravity drop, and wind deflection, to center your group on those targets”.
Litz Competition Shooting Tips
Competition TIP ONE. Improving your scores in long range competition is a constant process of self-assessment. After each match, carefully analyze how you lost points and make a plan to improve. Beginning shooters will lose a lot of points to fundamental things like sight alignment and trigger control. Veteran shooters will lose far fewer points to a smaller list of mistakes. At every step along the way, always ask yourself why you’re losing points and address the issues. Sometimes the weak links that you need to work on aren’t your favorite thing to do, and success will take work in these areas as well.
Competition TIP TWO. Select your wind shooting strategy carefully. For beginners and veterans, most points are typically lost to wind. Successful shooters put a lot of thought into their approach to wind shooting. Sometimes it’s best to shoot fast and minimize the changes you’ll have to navigate. Other times it’s best to wait out a condition which may take several minutes. Develop a comfortable rest position so you have an easier time waiting when you should be waiting.
Competition TIP THREE. Actively avoid major train wrecks. Sounds obvious but it happens a lot. Select equipment that is reliable, get comfortable with it and have back-ups for important things. Don’t load on the verge of max pressure, don’t go to an important match with a barrel that’s near shot out, physically check tightness of all important screws prior to shooting each string. Observe what train wrecks you and others experience, and put measures in place to avoid them.
Every serious hand-loader can use a powered Case Prep station. This multi-function device saves time and avoids repetitive manual labor (that can be downright painful after 50+ cases). Now you can get the Lyman Case Prep Xpress for a crazy low price. Midsouth just slashed its price on the Case Prep Express, and this unit also qualifies for a sweet $25 Rebate from Lyman. That puts your net cost at just $84.99. Hard to argue with that. Your wrists and fingers will thank you.
The Case Prep Xpress lets you chamfer inside and out, brush case-necks, clean/uniform primer pockets, and ream military crimps. However, the unit does NOT trim cases. The motor is powerful and the Xpress is easy to clean. On sale at MidSouth for $109.99 ($84.99 after Rebate), this is a great deal. You can also purchase at Amazon for $107.71 with free Prime Shipping ($82.71 after Rebate).
The Lyman Case Prep Xpress comes with all the necessary tools (listed above), so you don’t have to purchase extra accessories. The five (5) gear-driven heads on the unit are powered by a high torque, low-speed motor ideal for case prep operations. Lyman’s Case Prep Xpress features handy storage areas for accessories, a removable brass shavings dump pan, and a handy clean-up brush.
Sinclair Int’l video clearly illustrates all case prep functions. Worth watching.
In the four years that this product has been on the market it has been a strong seller. If you’re prepping hundreds of cases, this unit will save considerable time and reduce hand/finger fatigue. While the Case Prep Xpress is not as sturdy as the metal-bodied Hornady prep center, the Lyman unit offers a lot of functionality for the money.
Lyman Case Prep Xpress Pros and Cons
GOOD Features
Quite Affordable (under $120)
Compatible with RCBS and Redding Tool-heads
Removable Bin for Shavings
Four Brush Sizes: .25, .30, .38, .45
Compact Footprint
Not-So-Good Features
Tool-heads Not Particularly Sharp
No Case Trim Function
No Flash-hole Uniformer
No Top Dust-Cover
Only 1-Year Warranty
Reviews by Verified Purchasers
“Case prep is the most tedious and boring aspect for hand loading in my opinion. The process center makes all the steps in prepping the case very quick and with consistent results. It has reduced the time required to do these steps with separate tools by easily 50% if not more. Highly recommended.” — Brandon G.
“Quiet and capable. Worth every penny. I adapted a Lee Cutter and Lock Stud, to cut case lengths, and I can fly through my brass. I can do so much more brass without getting the sore, cramped-up hands.” — Dean Ellis
“This unit has plenty of torque, and my unit is very quiet. This unit will also work with tools made by RCBS and Hornady, or anything else with 8-32 threads. My Redding tools (specifically, my primer pocket uniformers) do in fact fit on this machine. This unit is certainly worth the money, and will revolutionize the way you reload by saving you massive amounts of time and wear on your hands/fingers.” — Mule
This article originally appeared in the Rifleman’s Journal website.
Many of you have doubtlessly read Bryan Litz’s articles in our Daily Bulletin and on his Applied Ballistics website about various current long-range bullets. Bryan’s work carries a great deal of weight in the world of ballistics, so his comments (and mathematical proofs) regarding the benefits of bullet pointing certainly caught my attention. Bullet pointing, like meplat trimming, is an effort to reduce the ballistic inconsistency created by the somewhat jagged tip of the jacket where the bullet forming dies bring it to a point in the manufacturing process. Of course, we could eliminate this problem altogether by shooting closed-tip, open-base bullets like the Lapua D46, but that merely shifts the jacket problem to the other end of the bullet.
In any event, hollow point bullets rule the accuracy world today, so John Whidden, multi-time National Long Range Champion and a talented gunsmith to boot, came up with a very handy tool to let us make those hollow points pointier. Let’s have a look at John’s tool and see how it works.
The Whidden Bullet Pointing Die System uses a Forster bullet seating die body as its basic structure and that’s a good choice given the quality machining Forster does on these. The real heart of the tool comes in two parts: the caliber sleeve and the pointing die that fits inside the sleeve. In fact, to point up different caliber bullets, you only need to change the caliber sleeve, everything else remains the same. The last item is the bullet base that slips into a standard .308 shellholder and supports the bullet as it goes into the die body.
It took me less than five minutes to get everything set up, including changing the caliber sleeve from 6mm to .30 caliber. John’s instruction sheets are well illustrated and clearly written; you should have no problem getting up and running.
Pointing the bullets is as easy as sizing a piece of brass. You can see in the second photo above the difference between a few pointed bullets and a few un-pointed ones. The innermost pointed bullet in the picture was my first attempt and I adjusted the die a little after that, you can see that the others are closed a little more. John even includes a couple of sample bullets so that you can see one done right and one done wrong. That is a nice addition that can help you achieve the desired results.
This YouTube Video Shows the Whidden Bullet Pointing Die in Action
I think Bryan’s work supports the validity of this concept and John’s tool puts it into practice in a simple-to-use manner that makes it just about impossible to do any damage to the bullet. I have shot pointed bullets in various calibers at many matches now. Pointing is not a “miracle cure”, but I believe that pointing bullet tips can produce long-range accuracy gains, through reduced vertical dispersion, for many popular types of match bullets. The Whidden Bullet Pointing Die System retails for $220.00 (with one insert). Additional die inserts are $42.00 each. Extra caliber sleeves are also $42.00. You can purchase directly from Whidden Gunworks, or from Sinclair International.
Don’t own a quality .22 LR wheelgun yet? Well start saving those pennies. Every serious gun aficionado should have a quality rimfire revolver. A rimfire wheelgun is also very good choice for a first handgun. Indeed, a strong argument could be made that a .22 LR revolver is THE best choice for a new shooter’s first handgun. A .22 LR revolver is easy to shoot, easy to maintain, and will last a lifetime.
TOP FIVE Reasons to Own a Rimfire Revolver:
1. Rimfire .22 LR Ammunition is cheap, and now plentiful again.
2. A good, full-size .22 LR revolver will be MORE ACCURATE than the vast majority of semi-auto rimfire handguns. With no magazines to jam, a good wheelgun will also be more reliable than most self-loading rimfires.
3. A rimfire revolver can shoot tens of thousands of rounds, with just routine maintenance. This gun can last a lifetime and then you can pass it on to your kids.
4. On a S&W revolver, it is very easy to tune the pull weight. You can have a safe double-action pull with a very light, crisp single-action release.
5. It is easy to change grips and sights to suit your preference. You can also mount a scope on the top-strap.
TOP FIVE Rimfire Revolvers (Current Production)
1. Smith & Wesson Model 617, 6″ or 4″ BBL, $829.00 MSRP
10-Shot, Stainless Steel, 44.1 Oz. (6″ barrel), 39 Oz. (4″ barrel)
Smith & Wesson’s Model 617, offered with either 6″ or 4″ barrels, is extremely accurate, with a very crisp trigger, and good sights. You can learn all the fundamentals with this ultra-reliable K-Frame handgun, shooting inexpensive .22 LR ammo. The model 617 is rugged, durable, and can give you a lifetime of shooting fun. Your Editor has owned a 4″ ten-shot Model 617 for over 20 years, and it’s still going strong.
Once you have mastered the basics of shooting with a .22 LR, you can move on to larger caliber handguns suitable for self-defense. Below is a slide-show illustrating a S&W model 617 ten-shot, with 6″ barrel. S&W also makes a 4″-barrel version of this revolver. (See: 4″ 617 Demo Video.)
Ruger introduced the .22 LR GP100 two years ago. Since then, it has become a good seller. This 10-shot revolver with 5.5″ barrel has a comfortable grip and triple-locking cylinder (locked into the frame at the front, rear and bottom). Many shooters like the fact that the 5.5″-barrel GP100 carries its heft more to the rear than S&W’s 6″ 617. However, we’d give the edge to the 617’s trigger. NOTE: Davidson’s also has a limited edition GP100 with shorter 4″ barrel. This Davidson’s exclusive edition 4″ GP100 is handier to carry and balances better.
3. Smith & Wesson Model 17 Masterpiece, 6″ BBL, $989.00 MSRP
6-Shot, Carbon (Blued) Steel, 39.9 Oz., 6″ Barrel
Smith & Wesson recently re-introduced its Model 17 Masterpiece revolver. This Blued 6-shot classic has been “re-released” with a retro-style grip. It still offers outstanding accuracy and a sweet trigger pull. For those who like the look of the original K-22 revolvers this can fill the bill. With a non-underlug 6″ barrel, this is 4.2 ounces lighter than the 6″ Model 617. The price, $989.00 MSRP, is pretty steep. It you look around you may be able to find an original K-22 for a few hundred dollars less. We’ve seen some decent examples on Gunbroker in the $700 range, but pristine K-22s are selling for over $1000 now.
4. Smith & Wesson Model 63, 3″ BBL, $769.00 MSRP
8-Shot, Stainless Steel, 25.8 Oz., 3″ barrel
The 8-Shot Smith & Wesson Model 63 may be one of the most versatile revolvers on the market. With a 3″ barrel, it balances well and is easy to hold. This makes this a great training pistol for a new shooter, even a junior or a lady with small hands. The latest 8-shot version offers nice big sights with fiber-optic front insert. While we consider this a great training and plinking handgun, it can also do double-duty for concealed carry. No the .22 LR won’t match the stopping power of a .357 Magnum, but better armed than not.
The new Ruger LCRx Revolver combines traditional wheelgun features with modern composite construction. The 3″ barrel and cylinder are steel. The “frame” housing the barrel and cylinder are aerospace-grade aluminum. The rear/lower section of the pistol, what Ruger calls the “fire control housing”, is made of polymer. This cuts weight and tames felt reoil. That fire control housing holds the hammer/trigger assemblies and provides a mount for the interchangeable grips. This is really a very innovative pistol. Thanks to its weight-saving features, Ruger’s LCRx is 8.5 ounces lighter than S&W’s Model 63, though both have 3″-long barrels.
The data-packed July issue of Shooting Industry magazine reveals key gun industry metrics — such as background checks, financial results from publicly-traded gun-makers, and the latest U.S. firearms manufacturing production data. The annual U.S. Firearms Today Report presents a comprehensive review of gun industry activity, including data on firearm production by caliber, shifts in export/import totals and the top 25 U.S. firearm manufacturers from 2015 (the latest data available).
As indicated by the ATF’s 2015 Annual Firearms Manufacturing and Export, the industry rebounded across several categories after a challenging 2014. Total firearms production increased from 8,692,461 in 2014 to 8,911,530 in 2015, growth of 2.5 percent. For the eighth year in a row, Ruger was the top overall U.S. firearms manufacturer with 1,667,820 firearms produced in 2015, while Smith & Wesson and Remington were the leading handgun and long-gun manufacturers, respectively. One notable trend is that Savage Arms significantly increased its production output compared to other leading rifle-makers.
Here are the top three rifle makers in 2015 with percentage change from 2014:
Gun Sales Trends in 2017 Compared to 2015
The Firearms Today Report reports that, contrary to some perceptions, gun sales remain strong: “Comparing the first five months of 2017 to 2015 (which was the second-largest year for U.S. firearms manufacturing), the industry is performing well. NICS background checks increased by 6.7 percent (from 5,427,494 to 5,793,571) from January through May 2017 compared to the corresponding months in 2015.”
The lastest issue of Shooting Industry (and all 2017 and 2016 monthly issues) can be accessed in their entirety online at www.shootingindustry.com/digital-version. CLICK HERE for July 2017 Digital Edition.
Story Lead from EdLongrange. We welcome reader submissions.
It’s July 4th, that means fireworks displays. What better time to order up some gunpowder? We’re pleased to report that Midsouth Shooters Supply and Powder Valley have received some big shipments from the major powder makers. In stock now at Midsouth and Powder Valley are many of the most popular accuracy powders, including: Hodgdon Varget, Hodgdon 4198, Hodgdon 4831, IMR 4166, IMR 8208 XBR, Vithavuori N133, Accurate LT30 and LT32, Norma 203B, Alliant Reloder 15, and many more. Sorry these vendors don’t have H4350 and Reloder 16, but Midsouth has the vast majority of the propellants our benchrest and precision shooters favor.
H4198 and LT30 are great for the 30BR, AR Comp and CFE 223 are excellent for Service Rifle shooters, VV N133 is a top choice for the 6PPC, Norma 203B (nearly identical to Reloder 15) is great in the 6mmBR and Dasher, IMR 8208 XBR is very accurate in the .308 Win, and Hodgdon H4831 is an excellent choice for the .284 Winchester and 7mm WSM.
All these popular Powders (and many more) are in stock:
When it comes to a “carry-around” hunting rifle, “light is right”. You don’t want to haul around unnecessary mass when you’re chasing game up and down mountains. When building an ultralight field rifle, it makes sense to prioritize the poundage — weight saved in the action, bottom metal, and stock can allow a heavier-contour barrel that may shoot better (and not heat up as quickly).
Now Pierce Engineering has developed a truly light-weight action, ideal for hunting rigs. The new Pierce Featherweight Titanium Action weighs just 15.2 ounces for the short action version. And the long action is barely more — just 16 ounces (one pound even). Pierce achieves this remarkable lightness with full Titanium construction — both action body AND bolt are super-high-grade Titanium.
Pierce Engineering explains: “This fully Titanium action features a solid Titanium bolt. Utilizing a rare, high-grade Titanium ensures this action is built to last. This is not standard grade 5 Titanium; it is very strong and the hardness is 44-45 RC. Every Titanium bolt comes standard with a Black Nitride Finish that adds lubricity and prevents galling. We have tried many coatings and found this to be far superior than anything else that is out there. All the Titanium Bolts come with a threaded titanium handle and an aluminum teardrop knob.”
Featherweight Titanium Short Action: $1,785.00 | Featherweight Titanium Long Action: $1,835.00
Product tip from EdLongrange. We welcome reader submissions.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
Tomorrow is Independence Day. Here’s the perfect product for the Fourth of July — a Red, White, and Blue AR upper. This “Stars & Stripes” Limited Edition combines the Guntec USA stripped Upper Receiver with the Guntec USA 15″ Keymod handguard, tricked out with a patriotic paint scheme. The upper may be used to build multiple calibers in the AR15 family such as .223 Remington, 6.5mm Grendel, and 300 AAC to name a few. NOTE: This is just a stripped upper receiver and handguard, NOT a “complete” upper. You’ll still need barrel, bolt/carrier, buffer tube, buttstock, and complete lower assembly.
2. Bullets.com — Big CLOSEOUT Sale on Ammo
Bullets.com has a large selection of rifle, pistol, and shotgun ammunition on sale. You can get name-brand ammo at big savings right now. If you’re looking for factory pistol ammo you should definitely shop at Bullets.com this week. And there are even deals to be had on ultra-premium Lapua ammo — just about the best factory ammunition you can buy (at any price).
3. Amazon — RCBS Rock Chucker Supreme Press, $126.99
The RCBS Rock Chucker remains a classic — a big, strong, versatile press that can handle most reloading chores with ease. And now you can get a genuine Rock Chucker Supreme for $126.99 — a very good deal. The Rock Chucker offers plenty of leverage for case-sizing and the “O” is tall enough for long cartridges. The Rock Chucker has a very strong base and should last a lifetime. We’re not fans of the Rock Chucker’s priming system but most serious reloaders use a separate priming tool.
This Master Tumbler Kit contains everything you need to tumble rifle or pistol brass. Now on sale for $56.07 with free Prime shipping, this Kit contains: Vibratory Tumbler, Rotary Media Separator, Plastic Bucket, 3 lbs. Cleaning Media, and 4 oz. Brass Polish. NOTE: We considered this an excellent deal when it was priced around seventy bucks. At $49.50 it is a total steal — you could easily pay more than that for a decent vibratory tumbler alone.
5. Whittaker Guns — Howa Lightning 6.5 Creedmoor Rifle, $299.99
With this deal you can get a complete 6.5 Creedmoor Howa 1500 Rifle with HACT 2-Stage Trigger for just $299.99. That’s $150.00 less than the price of a Howa 1500 barreled action by itself! ($449.99 at Brownells). This is a no-frills rifle, but its hard to beat the $299.99 price for a solid, multi-purpose rifle. Use “As-Is” for hunting or drop it into a modular stock for tactical/practical games.
6. MidwayUSA — Packable Shooting Mat, $19.99
Here’s a heck of a deal on a good light-weight shooting mat. MidwayUSA has slashed the price on its Packable Shooting Mat. Available in Coyote Tan or Olive Drab, this 67″ Long x 31″ Wide padded mat is now just $19.99. This Packable Mat has some nice features, such as 12″ front flap, elbow pads, 0.15″ thick padding, and six staking grommets. It’s easy to transport, rolling up to a 9″ x 4.5″ package, secured with a heavy strap. If you need a low-cost, basic shooting mat, check out this deal. Weighing just 1.5 pounds, this a good, light-weight mat to keep in a vehicle or to use on a “walk-around” varminting hunt.
7. Midsouth — Lee Auto Bench Priming Tool, $23.99
This relatively new bench tool does the job very well, and it’s easy to change primer sizes and shell holders. The “feel” of this tool is very good (better than most other bench priming units). If you like to pre-prime cases before using a progressive — this $23.99 Lee Bench Priming Tool gets the job done fast. The tool includes a new folding tray with built-in primer-flipping feature that allows direct filling from common primer boxes. The tool mounting holes are spaced for the Lee Bench Plate system (#006-90251) or the device can be mounted directly to your workbench. REVIEWS by verified purchasers.
If you shoot long range, you need a scope level. This Discovery scope level is fully CNC-machined to close tolerances for a good fit. It is available with inner diameters to fit scopes with either 1″ or 30mm main tubes. The 1″ version is just $12.99 while the 30mm model is $13.95. You could easily pay $35.00 or more for a 30mm scope level. Purchasers have praised this product: 89% of verified buyers rated this five stars.
9. Bullets.com — Handgun Safe, $49.95
This pistol safe keeps your handguns secure while still permitting instant “push-button” access. The three-button lock can be personalized with 3- to 8-digit codes, and there is a key override. This safe will hold two (2) full-sized pistols and can also store passports, cash, or other valuables. The spring-loaded door gives you near-instant response. The all-steel case also includes mounting holes for fixing the safe to floor or shelf.
We use 1″-diameter Target Spots for sight-in and practice at 100-300 yards. These bright red/orange self-adhesive dots are easy to see. At 100 yards the high-contrast black diamond centers provide precise aiming points. We found this 10-pack of target spots on Amazon at a rock-bottom price. You get 630 total stick-on dots for just $9.65 with FREE Shipping. You can also get 360 Birchwood Casey 1″ dots from Midsouth for just $3.15, but shipping is extra. If you’re already ordering something from Midsouth, you may want to add the dots to your order.
In recent months, Creedmoor Sports has expanded its selection of reloading tools and gear, under the guidance of Bill Gravatt, former President of Sinclair International. And Creedmoor recently launched the Creedmoor InfoZone, an online source for Shooting News, Reloading Tips, Gear Reviews and basic gunsmithing information. Visit CreedmoorInfoZone.com.
Bill Gravatt is an expert on reloading processes and gear. He developed many of the popular tools marketed by Sinclair Int’l, and now he’s lending that expertise to Creedmoor Sports. Bill is hosting a series of “how-to” videos produced for the Creedmoor InfoZone.
Here Creedmoor’s Bill Gravatt demonstrates several methods to clean your cases. Bill tells us: “Powder residue should be removed before you insert your cases into your reloading dies. There are several ways to clean your cases. Many shooters use a combination of various methods…”
1. Manual Cleaning — You can use 0000 Steel wool for the outside of the case and a Case Neck brush for the inside. A paper towel can remove any remaining residue. This is a handy way to clean if you load at the range.
2. Vibratory Tumbling — This traditional method works well, particularly for pistol brass. Experiment with both Corn Cob and Walnut media. You can get a brighter shine by putting a small amount of liquid brass polish in the media.
3. Wet Tumbling with Stainless Media — This process can get your brass clean inside and out. Do check to ensure no pins are stuck in the flash-holes. Watch for peening of case mouths that can occur over time.
4. Ultrasonic Cleaning — Ultrasonic cleaning works great for small parts as well as brass. The ultrasonic process removes all carbon and traces of lube, which can leave the inside of case necks too dry. To smooth bullet seating, try putting a tablespoon of Ballistol in the cleaning solution.
Cleaning Reloading Dies
Cleaning your reloading dies is something that many hand-loaders neglect. In this 60-second Tech Tip, Bill Gravatt provides some smart advice on cleaning your dies. Bill notes: “After heavy use, case lube and carbon can build up in your reloading dies. It’s important to keep them clean. Also, with new dies, give them a good cleaning before first use, because they ship with a corrosion inhibitor.”
1. Step 1 — Prior to cleaning, disassemble the die and spray it with a good degreaser. Do this with brand new dies too.
2. Step 2 – Take a patch and run it in the die to remove old lube and gunk. Don’t forget the decapping assembly and other internal parts.
3. Step 3 — After cleaning the die, but before reassembly, spray the die with a good corrosion inhibitor, such as Corrosion-X or Starrett M1.
As part of its online Load Data Center, Nosler offers very complete load data for the popular 6.5 Creedmoor cartridge. This medium-sized cartridge has become one of the most popular chamberings for tactical and PRS shooters. The 6.5 Creedmoor combines excellent accuracy, good mag-feeding, good barrel life, moderate recoil, and reasonable component cost. That’s why this cartridge has caught on quickly. GET ALL 6.5 Creedmoor Load Data.
How does barrel length affect 6.5 Creedmoor Muzzle Velocity? CLICK HERE for RifleShooter.com barrel cut-down velocity test.
According to the Sierra Load Manual: “Developed in 2007 by Dennis DeMille and Dave Emary, the 6.5 Creedmoor is a shortened and improved 30 TC cartridge case that was inspired by the .308 Winchester design. This short action design was created to maximize case capacity and a wide range of loading lengths, while still fitting in standard short action magazines. With the correct twist barrel, the versatile 6.5 Creedmoor can take advantage of the wide range of bullet weights available in 6.5 mm (i.e. .264 caliber). Reloaders should keep in mind that the 6.5 Creedmoor works best with medium to medium-slow powders such as H4350, Varget, Win 760, and RE-17.”
Click Image to Load PDF File for Listed Bullet Weights
Smith & Wesson’s 
