Camp Perry photo. Starting this year, the High Power Championships will be held at Camp Atterbury, IN.
There are some big changes this year for the NRA National Rifle and Pistols Championships. The NRA High Power Rifle Championships will be held in Indiana (at Camp Atterbury), not at Camp Perry, Ohio. That’s new for 2017. The smallbore championships was moved a few years back to Camp Wa-Ke’-De Range in Bristol, Indiana. The Pistol Championships will remain at Camp Perry. So, when once all three Championships were held in the same historic place, Camp Perry, now they are in three locations. Some folks lament that change…
REGISTRATION OPEN for Championships
If you want to compete in any of the NRA National Championships, you can now register online. We provide links below for Highpower Rifle, Smallbore, and Pistol Event. When you register, you’ll need an identifier — NRA Member ID, NRA ID (15 digit number) or an NRA National Rifle and Pistol Championships Online Entry ID from a previous year’s entry. See the individual championship entry links listed below.
by Gavin Gear, UltimateReloader.com
Norma is known for its high-quality brass and ammunition. I’ve used Norma brass for precision reloading in calibers like .30-06 with great results. Recently, I saw that Norma had announced a new addition to their Professional Hunter lineup of ammunition: in 6.5 Creedmoor! I thought I should try some out with the Ruger Precision Rifle, and that’s what I’ll cover in this post.
As you saw in the video, this ammunition behaves more like match ammunition than it does hunting ammunition — I really wish it was deer season! Here are the chronograph results:
This article comes from the Midsouth Shooters Blog. You’ll find other helpful gear reviews, reloading tips, and technical articles at www.MSSBlog.com.
With an SD of 13.7 FPS, this ammunition is very consistent in terms of velocity. It’s not surprising that the first four shots went into a .5″ group. This new ammunition is built around the Swift Scirocco II 6.5mm Bullet, and here’s more info about this precision-oriented hunting projectile:
Technical Information
Caliber: 264, 6.5mm
Bullet Diameter: 0.264
Bullet Weight: 130 Grains
Bullet Length: 1.350″
Bullet Style: Polymer Tip Spitzer Boat Tail
Bullet Coating: Non-Coated
Ballistics Information:
Sectional Density: .266
Ballistic Coefficient:.571
This is certainly a great choice of ammunition if you are hunting medium game with a rifle chambered in 6.5 Creedmoor. Can’t wait to sit down again with this ammunition to see if I can get that 3/8″ 5-shot group I know this ammo is capable of! If you want to try this Norma 6.5 Creedmoor Professional Hunter ammo yourself, you can purchase this excellent ammunition at Midsouth Shooters Supply.
The IWA Outdoor Classics trade show, aka “Euro SHOT Show”, opened today, March 3rd, in Nuremberg, Germany. For the next four days (March 3-6), 1455 exhibitors will show their products at the Nuremberg Exhibition Centre. This is a hugely popular event — last year’s IWA Outdoor Classics trade show attracted 45,530 trade visitors from 115 countries, and attendance should be even higher this year. IWA is Europe’s biggest combined trade show for the hunting, shooting, and civilian/military security industries. And this year, IWA Outdoor Classics was coordinated with EnforceTac, a two-day Law Enforcment/Security trade show held in Nuremberg March 1-2, 2017.
IWA even features an indoor Archery Range. For many years, the Archery Range has been a popular gathering place where exhibitors and visitors can practice their skills and learn about the latest archery products up close and personal.
About the IWA Outdoor Classics Trade Show
What is now the IWA Outdoor Classics trade show began 44 years ago as Germany’s national product show for gunsmiths and gun retailers. That product show started modestly in 1973 with less than 100 exhibitors. Over the past four decades IWA Outdoor Classics has grown into a massive event, drawing the major players in the hunting, security, and shooting sports industries. In the firearm universe, the IWA event is second only to America’s SHOT Show in importance.
Ever wondered what caused a particular bulge or marking on a case? And more importantly, does the issue make the case unsafe for further use? Sierra Bullets Ballistic Technician Duane Siercks offers some insight into various issues and their causes in this article from the Sierra Blog.
Incipient Case-Head Separation
This is a Winchester .308 Win case that has a real issue. This case has a very obvious incipient case head separation in the process of becoming a complete failure.
This is most commonly caused by over-sizing the case causing there to be excess headspace on the case. After a few firings and subsequent re-sizing, this case is just about ready to come completely apart. Proper die adjustment is certainly a requirement here. Of course this case is not safe to reuse.
Excessive Pressure (Load Too Hot)
If you will notice in the picture of the case rim, there are two pressure signs to notice. First, look at the primer. It is basically flattened to about the max of what could be considered safe. If this was the only pressure sign noted, I would probably be fine with this load, but would constantly keep an eye on it especially if I was going to use this load in warmer temperatures. This load could easily cross into the “excess pressure” realm very quickly.
There is another sign of pressure that we cannot ignore. If you’ll notice, there is an ejector mark apparent that is located over the “R” of the R-P headstamp. This absolutely tells us that this load would not have been in the safe pressure range. If there were any of these rounds loaded, they should not be fired and should be dis-assembled. This case should not be reloaded.
Split Case-Neck
Here we have an R-P .22-250 case that has died the death. Everything looks fine with this case except the neck is split. This case must be tossed.
A split neck is a normal occurrence that you must watch for. It is caused by work-hardening of the brass. Brass cases get harder with age and use. Brand new cases that are stored for a period of time can become hard enough that they will split like this case within one to two firings. I have had new factory loads do the same thing. Then as we resize and fire these cases repeatedly, they tend to get harder and harder. Eventually they will split. The life of the case can be extended by careful annealing practices. This is an issue that would need to be addressed in an article by itself. Of course this case is no longer usable.
In the classes that I teach, I try to use examples like this to let the students see what they should be looking for. As always, if we can assist you, whether you are new to reloading or very experienced, contact us here at Sierra Bullets by phone at 1-800-223-8799 or by email at sierra@sierrabullets.com.
Dented Case Body
Here we have a Lake City 7.62×51 (.308 Win.) case with two heavy marks/dents in the case body.
This one may be a bit of a mystery. It appears as if this case may have been caught in the action of a semi-auto rifle when the firearm jammed or the case failed to clear during the cycling process. I probably would not reload this case just to prevent any feeding problems. This also appeared to be a factory loaded round and I don’t really see any pressure issues or damage to the case.
It is very important to observe and inspect your cases before each reloading. After awhile it becomes second nature to notice the little things. Never get complacent as you become more familiar with the reloading process. If ever in doubt, call Sierra’s Techs at 1-800-223-8799.
Lyman Products now has a full-featured website that is modern, easy-to-navigate, and mobile-friendly. The newly-updated Lyman website features bigger photos, simpler navigation, and a shopping cart system that allows visitors to buy products directly through the site. It is also much easier to find key information, such as user manuals and product demo videos. Here are some “shortcuts” to key resources now available on LymanProducts.com.
The intuitive website allows visitors to create accounts, wish lists and find dealers near them. It’s been organized to allow visitors to easily locate their favorite brands or find products within a specific category such as gun care or shooting and practice gear. An extensive FAQ has been built from the most common customer questions and the video gallery offers instruction on gun cleaning and a sneak peek at what’s new for 2017.
“With the huge array of Lyman products and brands, we knew we had to offer our loyal customers a better platform on which to learn about our many products and brands,” Elizabeth Friedmann, Lyman’s Marketing Services Manager.
The NBRSA has liberalized its rules regarding front sandbags. Until this year, NBRSA rules required that benchrest competitors be able to lift their rifle fore-ends freely from the front bag. Accordingly, front bags could not “capture” the forearm or hold the gun down (i.e. keep it from rising). In order to meet this requirement, “legal” bags had straight sides that didn’t stand too far up.
Now the NBRSA rules have changed. You no longer have to be able to lift the gun up freely from the bag without interference. It’s now permissible to have a bag that offers some up/down retention. Check out this new bag from Edgewood Shooting Bags. Call “The EDGE”, it offers taller side sections that can hold the fore-arm in place and counter torque.
Edgewood’s designers state: “There are a couple of [NBRSA] rule changes for 2017. The change we found most intriguing was that the requirement of being able to lift your fore end freely from the front rest has been removed. So, we came up with a new design with super tall ears which will allow the innovators to push the envelope. Let’s see what you can do with these…”
We expect this new type of front bag will help stabilize short-range benchrest rifles, particularly in the 10.5-lb Sporter and Light Varmint classes. But we expect the biggest gains will be had with the big-caliber rifles used in Mid-Range and Long Range benchrest competition. In the 1000-yard game, heavy-recoiling 7mm and .30 caliber cartridges are popular with many shooters. These big guns generate considerable torque despite their ample weight. We predict these “super-sized” front bags will reduce both hop and rolling motion (torque) in the big guns.
We also expect that some varmint hunters will experiment with high-sided front bags that wrap around the fore-end. Such front bags may prove a real boon for guns with narrower, sporter-style fore-ends. And it would be interesting to see if this kind of tall-sided bag design will be incorporated into portable sandbags for the PRS game. We shall see…
Rule Change and Product Tip from EdLongrange. Product Tip from Boyd Allen. We welcome reader submissions.
When we first ran this story a while back, it spurred a hot debate, with strong opinions on both sides of the issue. Some guys argued vehemently that volumetric powder dispensing was best — citing the experience of short-range benchresters, most of whom still throw their charges. Others say weighing your charges is best, so long as you have a very precise, and very repeatable scale. We know some of the top 1000-yard shooters weigh their charges to the kernel.
Most competitive long-range shooters weigh powder charges for their handloads. Some even use ultra-precise magnetic force restoration scales to load to single-kernel tolerances. But is weight-based measuring always the best way to fill a case with powder? Another option is volumetric charging. This method fills a precisely-sized cavity with powder and then dumps the charge into the case. A Harrell’s rotary powder measure works this way, as does the sliding powder filler on a Dillon progressive press.
For long-range applications, most people believe that precise weighing of powder charges is the best way to achieve optimal accuracy and low ES/SD. However, those short-range Benchrest guys do pretty darn well with their thrown charges, at least at 100 and 200 yards.
Our friend Dennis Santiago recently observed something that made him scratch his head and wonder about weighing charges. His AR-15 match rifle shot better with volumetric (cavity-measured) charges than with weighed charges dispensed by an RCBS ChargeMaster. Here’s what he reports:
Cavity vs. Dribble (Dennis Santiago Report) I had the chance to compare nominally identical ammunition loaded two ways. These were all .223 Remington match loads using 77gr Sierra Match Kings over 23.4 grains of Hodgdon Varget. Same gun. However I loaded some ammo with charges dispensed with a Lee cavity-style powder measure while other rounds were loaded with powder weighed/dispensed by an RCBS Chargemaster. The cavity-drop ammo (with powder dropped from the Lee unit) was consistently better than the weighed-charge ammo. I have no idea why…
So, ladies and gentlemen — what do you think? Why did Mr. Santiago’s volumetrically-charged ammo shoot better than ammo filled with weighed charges? What’s your theory? Gary Eliseo suspects that Dennis’s Chargemaster might have been drifting. What do you think? Post your theories in the comments area below.
Applied Ballistics has produced a series of YouTube videos about precision long range shooting. Featuring ace long-range shooter and professional ballistician Bryan Litz, these videos address various topics of interest to long-range marksmen. This featured video looks at Long Range mistakes — Bryan Litz reveals the most common ballistics-related shooting errors at Long Range. And then Bryan explains how to improve your shooting (and wind reading) to eliminate those common errors.
Watch Applied Ballistics Video about Common Mistakes in Long Range Shooting:
Bryan Litz of Applied Ballistics often hears the question: “What are the main reasons people miss their target at long range?” To answer that question, in this video, Bryan explains the most important variables in Long Range shooting. Bryan says: “Probably the number one thing is range — you have to have a [precise] range to your target because your bullet is dropping, and to hit the target you need to correct for bullet drop.” Distance may be indicated on the target bay (or berm), but for open ranges you should ascertain distance-to-target with a quality laser rangefinder. Even when the distance to target is shown with a sign or marker, you may want to confirm the distance with your rangefinder. (You may be surprised — we’ve seen marked target distances at commercial ranges off by 25+ yards!) Bryan says: “Get a good laser range to the target and you’ll be within a couple yards”.
After distance to target, the most important variable is the wind. This is the most challenging factor because the wind is constantly changing. Bryan explains: “After 300 or 400 yards, the wind [will] move your shots off the target if you don’t correct for it. The best way to account for the wind is to measure it at your location with a Kestrel. The Kestrel can give you the speed and direction of the wind at your location, which can baseline your wind call for your long-range shot.” Bryan acknowledges that there will still be variables: “The wind isn’t always blowing the same downrange as at your location… and the wind is always changing”. Bryan notes that you need to account for variances in wind between the time you gauge the wind angle and velocity and the time you actually you take your shot.
If you watch just one episode of Shooting USA TV this year, it should probably be this week’s hour-long SHOT Show Special. Tonight, March 1, 2017, enjoy a full hour of SHOT Show coverage. Jim Scoutten’s team of gun journalists work hard every January, bringing you highlights from the gun industry’s largest trade show. Jim, son John Scoutten, and other staffers prowled the 12 miles of aisles in the Sands Convention Center in Las Vegas, visiting many of the 1,600+ exhibitors. This episode provides a “first look” at the new guns, optics, and gear introduced for 2017. Click HERE to learn more about this week’s SHOT Show episode.
2017 SHOT Show Highlights: Savage MSR Rifles, GA Precision Tempest Action, Smith & Wesson M&P 10 in 6.5 Creedmoor, Colt double-action Cobra, STI Match pistols and a whole lot more.
Shooting USA Hour AIR TIMES
Shooting USA’s SHOT Show Special will air for a full hour on Wednesday, March 1, 2016 on the Outdoor Channel. Here are the air times, but you should check your local schedule. Look for Shooting USA TV on the Outdoor Channel.
Wednesday Night Schedule:
Eastern Time – 9:30 PM; 1:00 AM (TH)
Central Time – 8:30 PM; Midnight (TH)
Mountain Time – 7:30 PM; 11:00 PM
Pacific Time – 6:30 PM; 10:00 PM
<
Here are some of the 50+ new products featured on the SHOT Show Special:
If you don’t own a good gun vise yet, buy this now! Cabela’s current $24.99 price is a total steal! We paid about $45.00 12 years ago for the very similar Tipton gun vise which is still going strong. This Cabela’s unit has all the nice features of the Tipton at a fraction of the price. With tough, chemical-resistant polymer construction, this Lifetime Guaranteed Cabela’s gun vise will provide years of service — all for under $25.00. Can’t argue with that.
Every rifle owner should have a handy, portable workstation like this. It is great for barrel cleaning, bore-scoping, trigger-tuning, and general maintenance tasks. This affordable gun vise features rubberized jaws and cradles to protect your rifle’s finish. The large forward compartment holds bolts, large parts, brushes, and tools. Solvent bottles and patches fit in the flat-bottom holes, while two round-bottom “dished” compartments conveniently hold small parts. A quick-release cam in the rear allows fast mounting/unmounting of long guns.
Editor’s Comment: Our similar Tipton gun vise has proven invaluable for many tasks: cleaning barrels, stock refinishing/bedding, scope mounting, trigger adjusting, bore-scoping barrels, and checking throat length. To be honest, I can’t understand how any serious shooter can get along without a product such as this. That said, these types of gun vises are not perfect. The front cradle will NOT fit rifles with forearms wider than 3 inches. And if your butt-stock is very shallow (vertically) from comb down to toe, it may not fit the rear clamping system very well. But, for 95% of the rifles out there, this type of Gun Vise works great. Just don’t ever use it as a shooting rest — it is NOT designed for that!
FREE SHIPPING: If you order at least $99.00 worth of products from Cabelas.com you can get free shipping with Coupon Code 37SHIP.
There are some big changes this year for the NRA National Rifle and Pistols Championships. The NRA High Power Rifle Championships will be held in Indiana (at Camp Atterbury), not at Camp Perry, Ohio. That’s new for 2017. The smallbore championships was moved a few years back to Camp Wa-Ke’-De Range in Bristol, Indiana. The Pistol Championships will remain at Camp Perry. So, when once all three Championships were held in the same historic place, Camp Perry, now they are in three locations. Some folks lament that change…
Most competitive long-range shooters weigh powder charges for their handloads. Some even use ultra-precise magnetic force restoration scales to load to single-kernel tolerances. But is weight-based measuring always the best way to fill a case with powder? Another option is volumetric charging. This method fills a precisely-sized cavity with powder and then dumps the charge into the case. A Harrell’s rotary powder measure works this way, as does the sliding powder filler on a Dillon progressive press.
