Nosler Factory Seconds are now available at Midsouth Shooters Supply. These bullets are completely functional (with correct weights and dimensions), with only minor cosmetic blemishes. You’ll find slight tip discolorations, water spots, and little else. The Accubond and Ballistic Tip bullets will work great for hunting — your prey won’t care about the water spots. And the RDF match bullets can definitely do the job for Service Rifle matches (70gr .224) or F-TR events (175gr .308). Getting match-grade, 30-Cal 175-grainers for $21.49 is a total steal. But you need to act soon — quantities are limited and these factory seconds blems always go fast. Once they are gone, they’re GONE!
Nosler Rifle Bullets on Sale Include:
.224 70gr BTHP RDF Match — now $13.49/100 (regularly $28.84)
.308 175gr BTHP RDF Match, $21.49/100 (regularly $37.21)
TEN Shots in 0.303″ (0.289 MOA) at 100 Yards
How does Dan’s XP-100 pistol shoot? Look at that target showing TEN shots at 100 yards, with eight (8) shots in the main cluster at the top. The ten-shot group measures .303″ (0.289 MOA), as calculated with OnTarget Software. Not bad for a handgun! What do you think, can your best-shooting rifle match the 10-shot accuracy of this XP-100 pistol?
Report by Boyd Allen
This pistol belongs to Dan Lutke, a Bay Area benchrest shooter who publishes the results for the Visalia matches to the competitors and the NBRSA. He has been an enthusiastic competitor for an number of years, at various ranges, notably Visalia and Sacramento. The action is a Remington XP-100, to which a Kelbly 2 oz. trigger has been fitted. On top is an old Japanese-made Tasco 36X scope (these were actually pretty darn good). The Hart barrel (a cast-off from Dan’s Unlimited rail gun) was shortened and re-chambered for the 6x45mm, a wildcat made by necking-up the .223 Remington parent case. The custom stock/chassis was CNC-machined by Joe Updike from 6061 Billet Aluminum to fit the XP-100 action and mount a target-style AR grip with bottom hand rest. The gun was bedded and assembled by Mel Iwatsubu. In his XP-100 pistol, Dan shoots 65gr custom boat-tails with Benchmark powder.
This diagram shows the most common 6x45mm wildcat, which is a necked-up version of the .223 Remington parent cartridge. NOTE: The dimensions for Dan Lutke’s benchrest version of this cartridge may be slightly different.
ACAD drawing by Peter Gnanapragasam CC by SA 3.0, via Wikimedia Commons. Title Added.
Story tip from Boyd Allen. We welcome reader submissions.
6.5 Creedmoor vs. Other Mid-Sized 6.5mm Cartridges
The 6.5 Creedmoor is a very popular cartridge with the tactical and PRS crowd. This mid-size cartridge offers good ballistics, with less recoil than a .308 Winchester. There’s an excellent selection of 6.5mm bullets, and many good powder choices for this cartridge. When compared to the very accurate 6.5×47 Lapua cartridge, the 6.5 Creedmoor offers similar performance with less expensive brass options. For a tactical shooter who must sometimes leave brass on the ground, brass cost is a factor to consider. Here’s a selection of various 6.5mm mid-sized cartridges. Left to right are: 6.5 Grendel, 6.5×47 Lapua, 6.5 Creedmoor with 120gr A-Max, 6.5 Creedmoor with 142gr Sierra MK, and .260 Remington.
When asked to compare the 6.5 Creedmoor to the 6.5×47 Lapua, Rifleshooter.com’s Editor stated: “If you don’t hand load, or are new to precision rifle shooting, get a 6.5 Creedmoor. If you shoot a lot, reload, have more disposable income, and like more esoteric cartridges, get a 6.5×47 Lapua. I am a big fan of the 6.5×47 Lapua. In my personal experience, the 6.5×47 Lapua seems to be slightly more accurate than the 6.5 Creedmoor. I attribute this to the quality of Lapua brass.” But now that Lapua is producing top-quality 6.5 Creedmoor brass with small primer pockets, we could have a “second generation” 6.5 Creedmoor that rivals ANY mid-sized cartridge for efficiency AND accuracy. We will soon know how well the 6.5 Creedmoor cartridge performs with Lapua brass.
The first shipment of Lapua 6.5 Creedmoor brass has arrived in the USA. It features a small flash hole and small primer pocket. We have some for testing…
New Lapua 6.5 Creedmoor Brass Field Tests Soon
Our friends at 65Guys.com will be testing the new Lapua 6.5 Creedmoor brass next week. The goal will be to determine if Lapua’s new Small Primer Pocket/Small Flash Hole brass allows higher velocities than American-made brass (Hornady specifically). In addition the 6.5 Guys want to see how well the new Lapua brass holds up after dozen (or more) firing cycles. They’ll hammer the new brass pretty hard to see how it fares with repeated stout loads. Stay tuned…
Here are three tables from the Sierra Bullets Reloading Manual (5th Edition). IMPORTANT — This is just a sample!! Sierra has load data for many other 6.5mm bullet types, including FB, Spitzer, SBT, HPBT, and Tipped MK from 85 grains to 142 grains. To view ALL 6.5 Creedmoor DATA, CLICK HERE.
INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.
INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.
INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.
Newly-Appointed IBS Executive VP Josh Shrum was IBS 2016 Score Shooting Rookie of the Year.
The International Benchrest Shooters (IBS) organization has appointed Mr. Josh Shrum of Whitney, PA to be its Executive Vice-President (EVP), effective March 1, 2017. Josh will work with the IBS Executive Board to promote the IBS, expand IBS membership, boost match attendance, and grow Benchrest shooting in general.
“With Josh on-board, we will take IBS to new levels to achieve visibility, results and growth that a group of volunteers simply cannot achieve.” said IBS President Jeff Stover. While Josh’s EVP position is part-time, Josh will bring a full-time amount of energy and a passion for Benchrest shooting in all its disciplines. Working under the direction of the President and IBS Board, Josh will complement the existing IBS staff of webmaster Dick Grosbier and recording secretary Joan Borden.
Josh will greatly expand IBS’s association with the AccurateShooter.com website. In recent years, the IBS partnered with this popular precision rifle shooting site which draws over 500,000 unique visitors per month, a very large audience focused on rifle accuracy. “By far, Accurateshooter.com is the world’s largest stage for accuracy shooters. The IBS needs to take full advantage of this opportunity to grow Benchrest.” added Stover.
You can expect to see Josh shooting in all the disciplines: Score, Group, 600 and 1000. In 2016, he was IBS Score Shooting Rookie of the Year and solidified his benchrest shooting bona fides by snagging a 25X 100-yard aggregate in his first full year of shooting.
Josh, just 31 years old, brings a youthful perspective to the IBS. For his “day job”, he manages a 1,600-acre estate owned by the Benedictine monks of St. Vincent College in Latrobe, PA. He holds a degree in History and English from St. Vincent College. “I am excited and looking forward to working to promote the IBS. I already have a list of ideas to present to the Board” Josh said after hearing of his selection.
International Benchrest Shooters (IBS) was formed in 1970 to foster uniform competition to achieve the ultimate accuracy in firearms, ammunition, components, equipment and shooting methods. Benchrest disciplines contested include group and score at 100, 200 and 300 yards. The Long Range program is especially active with competitions at both 600 and 1000 yards. IBS Registered matches are held from Maine to Missouri and from Montana to Georgia.
In the near future, there could be changes in the way the Bureau of Alcohol, Tobacco, Firearms, and Explosives (ATF) treats sound suppressors (aka “moderators” or “silencers”). An official government White Paper, dated 1/20/17, was recently leaked to the press and revealed by the Washington Post.
The ATF White Paper makes some key points about suppressors:
1. 42 States currently allow silencers.
2. Silencers are not a threat to public safety, and are rarely used in criminal activities.
3. The inclusion of suppressors in the NFA is “archaic” and should be reevaluated.
4. The definition of regulated suppressor components should be narrowed, so that only key items are regulated as opposed to “any combination of [silencer] parts”.
5. A change in Federal law removing silencers from regulation under the NFA would save resources, allowing the ATF to focus on reducing actual gun-related crime.
Here is the operative text of the ATF White Paper:
Current Federal law requires ATF to regulate silencers under the NFA. This requires a Federal tax payment of $200 for transfers, ATF approval, and entry of the silencer into a national NFA database. In the past several years, opinions about silencers have changed across the United States. Their use to reduce noise at shooting ranges and applications within the sporting and hunting industry are now well recognized.
At present, 42 states generally allow silencers to be used for sporting purposes. The wide acceptance of silencers and corresponding changes in state laws have created substantial demand across the country. This surge in demand has caused ATF to have a significant backlog on silencer applications. ATF’s processing time is now approximately 8 months. ATF has devoted substantial resources in attempts to reduce processing times, spending over $1 million annually in overtime and temporary duty expenses, and dedicating over 33 additional full-time and contract positions since 2011 to support NFA processing. Despite these efforts, NFA processing times are widely viewed by applicants and the industry as far too long, resulting in numerous complaints to Congress. Since silencers account for the vast majority of NFA applications, the most direct way to reduce processing times is to reduce the number of silencer applications. In light of the expanding demand and acceptance of silencers, however, that volume is unlikely to diminish unless they are removed from the NFA. While DOJ and ATF have historically not supported removal of items from the NFA, the change in public acceptance of silencers arguably indicates that the reason for their inclusion in the NFA is archaic and historical reluctance to removing them from the NFA should be reevaluated.
ATF’s experience with the criminal use of silencers also supports reassessing their inclusion in the NFA. On average in the past 10 years, ATF has only recommended 44 defendants a year for prosecution on silencer-related violations; of those, only approximately 6 of the defendants had prior felony convictions. Moreover, consistent with this low number of prosecution referrals, silencers are very rarely used in criminal shootings. Given the lack of criminality associated with silencers, it is reasonable to conclude that they should not be viewed as a threat to public safety necessitating NFA classification, and should be considered for reclassification under the [Gun Control Act] (GCA].
If such a change were to be considered, a revision in the definition of a silencer would be important. The current definition of a silencer extends to “any combination of [silencer] parts”, as well as “any part intended only for use in” a silencer. Compared to the definition of a firearm, which specifies the frame or receiver is the key regulated part, any individual silencer part is generally regulated just as if it were a completed silencer. Revising the definition could eliminate many of the current issues encountered by silencer manufacturers and their parts suppliers. Specifically, clarifying when a part or combination of parts meets a minimum threshold requiring serialization would be useful.
Do you own a Springfield M1A (or wish you did)? Then you should watch this 5-minute video from the American Gunsmithing Institute (AGI). This video shows the basics of the operation of the popular M1A rifle, the civilian version of the military M14. In this video, gunsmith John Bush field-strips the M1A and shows how the bolt, op rod, and trigger group fits together and operates. This video contains excerpts from the M1A Rifle Armorer’s Course, AGI Course #1584. The full Armorer’s Course is available on DVD from www.AmericanGunsmith.com.
Watch Highlights of AGI M1A Rifle Armorer’s Course:
Registration Opens for 2017 CMP Springfield M1A Match
The 11th annual Springfield Armory M1A Match will take place during the 2017 National Trophy Rifle Matches. The CMP will host the event on Saturday, July 22, following the John C. Garand Match. Competitors of all experience levels are encouraged to bring their M1A rifles to Camp Perry and compete. Registration for the match will open April 1, 2017, and is open to all individuals ages 12 and above, with an entry fee of $50 (junior $25).
The Springfield Armory M1A match began with one man’s idea and passion. Springfield Armory’s Mike Doy witnessed the waning of classic M1 Garand and M1A rifles from the competitive High Power firing lines. “I really wanted to get those M1A rifles out of safes and closets and back out onto the field. So 11 years ago, I promoted the idea of running an M1A-specific match at Camp Perry. That first year we had over 600 competitors and spectators.” Now the match offers some of the biggest pay-outs at Camp Perry. In recent years, Springfield Armory has donated over $25,000 worth of cash and prizes, including a $2,000 cash award to the overall winner.
This custom war wagon hauls varmint hunters around the Longmeadow Game Resort in Colorado.
If you’re planning a spring Prairie Dog adventure, it’s time to load up a big supply of ammo. On a 4-day varmint safari you can easily shoot 800 rounds or more in a prime P-Dog location. To save on ammo costs for high-volume shooting, it makes sense to buy components in bulk. Here’s a super deal on bullets for your .224-caliber varmint rig.
Right now Midsouth Shooters’ Supply is running a special on Varmint Nightmare XTreme Bullets. Available in both hollow point (HP) and lead-tip soft point (SP) styles, you can get these bullets for under $50.00 for 500. The .224 55gr Flat Base Soft Point variety is on sale this week for just $42.92 for 500 bullets (that works out to just $8.58 per hundred). We’ve loaded these in .223 Rem, 22 Dasher, and 22-250 cartridges and they worked well (considering the really low price).
Powder Suggestion for High-Volume Varmint Loads
For high-shot-count varmint safaris, you want a clean-burning powder that minimizes barrel fouling. While there are many great powders for the .223 Rem, we like Hodgdon CFE 223 for our high-volume varmint loads. This powder really seems to keep barrels cleaner. Originally developed for U.S. rapid-fire military systems, CFE 223 incorporates a proprietary chemistry named “Copper Fouling Eraser”. Based on tests with extended shot strings, Hodgdon claims that, by using CFE™223, match shooters, varmint hunters, and AR shooters can maintain accuracy for longer periods, with less barrel-cleaning time. You may want to check it out.
The Precision Rifle Series (PRS) for tactical bolt guns has become hugely popular. Capitalizing on that success, the PRS has approved a new Gas Gun series for semi-auto rifles such as AR15s and AR10s. Since the launch of the PRS a few seasons back, Gas Gun shooters have wanted to play. Recognizing the interest among semi-auto shooters, the PRS ran two “prototype” Gas Gun matches last year.
PRS Director Shawn Wiseman Explains New Gas Gun Series in this Video:
Based on positive feedback from the 2016 test matches, PRS founders approved a full 2017 Gas Gun series which kicks off this week. The 2017 PRS Gas Gun Series opener will be held February 17-19, 2017 at the CORE Shooting Solutions range in Baker, Florida. Here’s a video showing CORE’s facility:
For the new PRS Gas Gun Series, rules and scoring procedures needed to be developed. Accordingly, a committee of top PRS shooters, Multi-Gun shooters, and Match Directors was assembled to develop the PRS Gas Gun Series Rule Book. Highlights of the Rules are listed below.
Last month, Shooting Sports USA interviewed PRS President Shawn Wiseman. In a Question and Answer session, Wiseman outlined key elements of the new “Gasser” PRS series. Here are samples from that interview:
SSUSA: What will be the format of the 2017 PRS Gas Gun Series matches?
Wiseman: The matches will be a two day format with 8 to 10 stages per day. No more than 50 percent of the stages can be unlimited round count and 25 percent of the targets must be 2 MOA or smaller. The scoring will be overall time plus penalties with the winner being the shooter with the fastest time including all penalties. There are three Divisions; Tactical Light for 5.56x45mm NATO/.223 Rem. rifles, Tactical Heavy for 7.62x51mm NATO/.308 Win., and Open for everything else up to .30 cal. The maximum distance will be 800 yards.
SSUSA: What guns do you expect to be popular?
Wiseman: In the Open Division, I expect to see a lot of 6.5 Creedmoors for two main reasons; it’s an inherently accurate cartridge and Hornady makes great ammo for the folks that aren’t into reloading. I think the Tactical Light Division will probably be the most popular. It is hard to say specifically what rifles will be the most popular but there are a few AR companies that are known for the accuracy. Armalite, GA Precision, LaRue and Seekins will all be very popular rifles in this Series. I think we will continue to see high-end optics with 5 to 6X zoom range on the rifles. Bushnell, Kahles, Leupold, Nightforce and Vortex will continue to be the most popular.
PRS Gas Gun Series Rules
For the new PRS “Gasser” Competition, the PRS developed rules on gun types, scoring, match timing, penalties, safety and other key topics. CLICK HERE for Full PRS Gas Gun Series Rules.
Scoring and Penalties
The Gas Gun Series utilizes a time plus penalty-based scoring system for all match scoring. This means the score is the shooter’s total combined time on all stages plus any penalties accrued.
Penalties are as follows:
30 seconds for any rifle targets not engaged or neutralized.
15 seconds for any pistol targets not engaged or neutralized.
15 seconds for hitting a “No Shoot” target.
No more than 50% of the stages at a match can utilize an unlimited round count. At least 25% of the targets in Gas Gun Series match must be 2 MOA or smaller. Maximum distance is 800 yards.
Open Division: The Open Division rifles will not exceed a caliber of .30 or a velocity of 3,200 fps. A match DQ will result any rounds over the speed limit of 3,200 fps (+/- 32 fps for environmental factors and equipment discrepancies). Match Officials may request at any point during a match that a competitor fire their rifle through chronograph. If the bullet exceeds the 3,200 fps speed limit, the shooter will receive an automatic match DQ.
Tactical Light Division: Intended to allow competitors the opportunity tocompete using traditional military and law enforcement caliber. This promotes Active Duty military and law enforcement competitors use of their Service and Department-issued rifles. Tactical Light Division rifles are restricted to 5.56 NATO/.223 Remington calibers only. Bullet weight cannot exceed 77 grains and muzzle velocity cannot exceed 3,000 fps.
Tactical Heavy Division: Intended to allow competitors the opportunity to compete using traditional military and law enforcement caliber. This promotes Active Duty military and law enforcement competitors use of their Service and Department issued rifles. Tactical Heavy Division rifles are restricted to 7.62 NATO/.308 Winchester calibers only. Bullet weight cannot exceed 178 grains and muzzle velocity cannot exceed 2,800 fps. No modified wildcat rounds permitted to shoot in the Tactical Divisions Anyone discovered violating this rule will receive an automatic Match DQ. Tactical Division shooters will shoot the exact same COF as Open Division shooters.
Each week, Brownells releases a new product video. This week’s review spotlights Hornady match bullets and factory ammo of interest to PRS and tactical shooters. Hornady’s ELD Match ammunition is now offered in the popular 6.5 Creedmoor and 6mm Creedmoor chamberings, along with .223 Rem, 6.5 Grendel, 260 Rem, .308 Win, .30-06, .300 Win Mag, and .338 Lapua Mag. This ammo is loaded with Hornady’s ELD Match bullets which feature heat-resistant tips. The ELD bullet line offers impressive BCs at prices that are quite a bit more affordable than some other match bullets. For example, a 100-ct box of 130gr 6.5mm ELD Match bullets is $32.46 at Midsouth.
For 6.5 Creedmoor shooters, three bullet weights will be offered in factory-loaded 6.5 Creedmoor ELD Match ammo: 120 grain (SKU: 81491), 140 grain (SKU: 81500), and 147 grain (SKU: 81501). Hornady’s 6mm Creedmoor ELD Match ammo is offered in one weight, 108 grain (SKU: 81391).
The 6.5 Creedmoor and 6mm Creedmoor chamberings are very popular with PRS competitors. These cartridge types offer excellent accuracy, and a good ballistics with moderate recoil. Many factory rifles, such as the impressive new Tikka T3X A1, are offered in the 6.5mm chambering.
This video also features Hornady’s new Black Ammunition designed for gas guns. Offerings include 5.45x39mm, 6.5 Grendel, 6.8 SPC, 300 AAC BLK, 450 Bushmaster, and .308 Win. The 6.5 Grendel ammo attracted our attention. That chambering is inherently accurate and could be used successfully in an XTC match rifle or in the new PRS Gas Gun Series.
This an older video from the YouTube archives but we expect many readers have still not seen it yet. It definitely teaches an important lesson — never underestimate the destructive power of rifle-launched projectiles. What appears a “safe distance” from steel may actually be well within the danger zone.
In this video a rather ignorant (yet lucky) fellow demonstrates what NOT to do with a large-caliber rifle (a 50 BMG apparently). He shoots at a steel target about 70 yards away and a bullet fragment comes back directly at him. He was lucky enough that the ricochet just smacked his left ear muff. Another inch to the right and he could have lost his eye… or worse.
If you have ever done much action pistol shooting at close range on steel targets, you’ll know about the hazards of ricochets and bullet splashback. That’s why you should only shoot low-velocity rounds with soft lead or frangible bullets when shooting at relatively close range.
