We are sad to report that long-time Forum member Frank S. (aka fdShuster) passed away last year. Frank was a very knowledgeable shooter who was always willing to help others. Here is one of Frank’s smart inventions. He devised a way to measure the length of a rifle’s chamber using a fired cartridge case. This lets you find your MAX trim-to-length for any chamber. Frank’s system works by cutting a “collar” from part of the case neck. This then slips over a bullet seated in a case loaded without powder or primer. As you chamber the dummy round, the collar will move back to indicate the full length of the chamber. (Make sure the bullet is seated well off the lands so the dummy round can chamber fully.)
The pictured gauge can be home made (for free) with components you already have on hand. Frank explained: “I used a Dremel cut-off wheel to cut the front half of the case neck off. A jewelers needle file to de-burr both rough-cut edges. The cut-off surface does not need to be perfectly square, because you are using the original straight mouth to make contact at the front of the chamber. Seat any old bullet to the approximate normal seating length. Next apply a tiny drop of oil on the ogive of the bullet, and slide the ‘collar’ over the bullet. Then chamber the dummy round and close the bolt. Extract the round slowly and carefully and take the measurement with calipers (see top photo).”
Frank’s DIY chamber length gauge works well. In a related Forum thread, Frank posted: “I’ve compared length dimensions doing it this way and with the chamber length shown on my chambering reamer drawings, and the Sinclair gauge, and they are all within .001″ or so.”
Commercial Chamber Length Gauges May Not Work with Custom Chambers
Frank did use Sinclair chamber-length gauges for some applications. These bullet-shaped gauges slip into a cartridge, but “it’s inconvenient to order that little gauge only… without spending $6 shipping for a $7 item.” Moreover, the Sinclair gauges may not fit a custom chamber with a tighter neck dimension because the diameter of the ring at the end is too large.
As an alternative to commercial gauges, the collar-type, homemade gauge will function properly in a custom chamber. The homemade gauge will work with smaller-than-standard chamber neck dimensions, as long as you use a piece of appropriately-turned fired brass that fits your chamber.
The election is now just one week away. This is not just about who will become President. With Supreme Court appointments at stake, this election could have significant, long-term consequences for gun owners’ rights under the Second Amendment. We may be at an historic juncture in our nation’s history. If control of the U.S. House and Senate changes, and if anti-Second Amendment Supreme Court Justices are appointed, then things could change in very bad ways for the shooting sports. In the video below, National Shooting Sports Foundation President/CEO Steve Sanetti asks all gun owners to go to the polls armed with the facts. Exercise your right to vote. Remember, every vote counts.
Message from Steve Sanetti:
The lawful commerce in firearms and [your] rights … to enjoy the shooting sports are squarely at issue this year.
And this election is about far more than just the Presidential candidates. Control of both Houses of Congress, the Supreme Court, and all the important appointments and executive orders that the next President can make, are all at stake.
And your State and local elections can also affect your ability to enjoy your rights to manufacture, sell, own, and use firearms.
So please — don’t sit this one out. Your vote, and every vote, counts. Learn where all the candidates stand, talk to your family, your friends and your coworkers, and vote! This election is up to you, and America is counting on you!
Team USA Olympian and ISSF World Cup Winner SFC Michael McPhail is one of the world’s best smallbore rifle shooters. He is also an avid hunter, who enjoys harvesting game with centerfire rifles. In this excellent short video from the USAMU, McPhail shows how competition shooting positions can be adapted for hunters. McPhail shows how well-established positions can provide a more stable platform for hunters in the field. That can help ensure a successful hunt. McPhail demonstrates three positions: kneeling, supported prone, and sitting in a tree-stand.
Watch SFC McPhail Demonstrate Positions for Hunters (Good Video):
McPhail first demonstrates the kneeling position. Michael notes: “I like kneeling. It’s a little bit of an under-utilized position, but it’s almost as stable as prone. It allows you get up off the ground a little bit higher to [compensate for] vegetation. For kneeling start by taking your non-dominant foot and put that towards the target, while at the same time dropping down to a knee on the dominant leg. At the same time … wrap the sling around wrist and fore-arm, lean slightly into the target and take the shot.”
McPhail shows a nice “field expedient” use of your backpack. He shows how the basic prone position can be adapted, using the pack as a front rifle support. McPhail recommends pulling your dominant (strongside) leg forward, bent at the knee. According to Michael, this takes pressure off the abdomen, helps minimizes heart beat effects, and helps with breathing.
Last but not least, McPhail shows some clever treestand tricks. McPhail recommends a position with your weakside leg pulled up and firmly braced on the front rail of the treestand. You can then rest your support arm on your leg. (That would be the left arm for a right-handed shooter). This provides a rock-solid position when shooting from a stand. The second half of the video shows how this works.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
Could you use a secondary safe for your reloading room, workshop, or bedroom? This Stack-on 16-Gun Safe fills the bill, and it’s now available from Walmart with great “Roll-Back” Pricing. Rated for 16 long guns, this smaller safe can realistically hold 8 or so scoped rifles comfortably. But it can also hold your handguns, rangefinders, cameras, jewelry and other valuables. Let’s face it, your primary gun safe is probably full so you could use a second safe to hold smaller items. This Stack-On safe features a reliable, rotary combination dial lock. Walmart’s current price is just $359.00, a $190.00 savings. And right now the home delivery charge is a mere $9.99.
2. Cabela’s — Rock Chucker Reloading Kit, $225.00 After Rebate
Everything you see above can be yours for just $225.00, after manufacturer’s rebate. Right now, Cabela’s is selling the Rock Chucker Supreme Master Reloading Kit for $300.00. That’s a good deal as this Reloading Kit sells elsewhere for up to $360.00. But he’s the real incentive — if you spend $300.00 on RCBS products in 2016, RCBS will send you a $75.00 rebate. That reduces your net cost to just $225.00 for the entire Kit.
3. Creedmoor Sports Rifle Cases 25% OFF — SALE Ends Today!
Creedmoor Sports is running a Halloween special on its popular rifle cases. Right now you can get a 52″, packable rifle case for just $50.00, $25% off the regular $66.95 price. The built-in shoulder straps allow you to wear this cleverly-designed case like a back-pack. That frees both hands to carry your other gear. Along with these big, 52″ rifle cases, Creedmoor Sports has a variety of other rifle cases on sale. In addition, you can get a FREE mesh cartridge bag with any order over $50.00. In addition, you can get FREE Ground Shipping on all orders of $150.00 or more. NOTE: These Halloween weekend prices expire at 11:59 PM CST on Monday, October 31, 2016.
Here’s a “killer deal” if you need a high-quality scope for hunting and mid-range tactical games. This Vortex Viper PST 2.5-10x44mm scope features an illuminated reticle with Mil-based hash marks. The 2.5X low-end magnification gives hunters a wide field of view. The tactical-style turrets have 0.1 Mil clicks with zero-stop. The scope, which features a rugged, 30mm one-piece main tube, carries Vortex’s full warranty. Note this is a Second Focal Plane (SFP) scope. You can save hundreds with this deal — this optic sells elsewhere for up to $599.00.
5. Walther — New 9mm CREED Pistol, $399.00 MSRP
Walther’s compact pistols have class-leading ergonomics and smooth trigger pulls that beat the competition. And now you don’t have to pay a premium for Walther quality. Walther’s new Creed 9mm pistol has an MSRP of just $399.00, and expect “street price” to be even lower. That makes the new Creed way more affordable than a Glock or HK. The Creed has a slide similar to Walther’s flagship PPQ with the pre-cocked hammer-fired action of the PPX. Like the PPX and PPQ, the Creed is a mid-size, double-stack service pistol chambered for 9mm Luger. Reviewers at GunsAmerica like this pistol: “[The Creed] marries Walther’s pre-set hammer-fired action with the good looks and curved surfaces of the company’s higher-end products.”
The Hornady Lock-N-Load AutoCharge Electronic Scale/Dispenser is now on sale for just $169.99 at Natchez Shooters Supply. That’s the lowest price we’ve seen on this product in a long time, making this a real bargain. If you are looking for an affordable combination digital scale and powder dispenser, this is very attractive pricing. By comparison, the RCBS ChargeMaster now sells for $369.99 at Grafs.com. That means you can save $200.00 by buying RED instead of GREEN.
7. Amazon — Neiko Digital Calipers, $16.45
Even if you have a good set of calipers, you may want to get one of these Neiko 01407A Digital Calipers. The #1 best-selling digital caliper on Amazon.com, this Neiko tool features a large LCD Screen and measures up to 6.0 inches. With over 2300 customer reviews, this product has earned an overall rating of 4.4 out of 5 stars. It’s hard to go wrong for $16.45, even if you just use these as a spare set for measuring group sizes and case trim lengths. You can get free shipping if you combine with other Amazon purchases that exceed $49.00 in total.
8. Sportsman’s Guide — Frankford Arsenal Case Tumbler Kit
For just $69.99, this Frankford Arsenal Kit provides everything you need to clean brass: Vibratory Tumbler, Rotary Media Separator, Bucket, Corn Cob Media (3 lbs.), and Brass Polish. The Case Tumbler holds up to 600 9mm cases or 350 .223 Rem cases. The separator system is generous, with a 3.5-gallon bucket. NOTE: Sportsman’s Guide Buyers Club members can purchase this kit for $62.99.
9. Gander Mtn. — American Eagle .22 LR Ammo, $2.49 for 40 Rds
We couldn’t run a Deals of the Week feature without a great ammo deal. Here’s a great price on .22 LR rimfire ammo for fun-shooting, plinking, and tactical cross-training. Right now Gander Mountain is selling forty (40) rounds of Federal American Eagle .22 LR copper-top rimfire ammo for just $2.49. Grab it while you can. There is a limit of 5 boxes per order at this price. Note — this is a 40-round box, not the normal 50-round box.
Jim Borden of Borden Accuracy tells us that he will soon offer Titanium actions: “The Alpine and Timberline family of actions will soon be available for sale with Titanium action bodies. Stay tuned!”
Jim provided this photo of a prototype Alpine Magnum Titanium action body on the scale. Note it is just a bit over one-half pound without bolt. That’s light-weight. Jim said he will “send bolt body, action body, recoil lug, bolt stop and bolt shroud for PVD treatment next week”. Jim hopes to be shooting the finished prototype Titanium Alpine action in two weeks.
AccurateShooter.com will provide a full report on the Borden Titanium actions when they reach final production stage. The reduced weight benefits game hunters who have to carry their rifles far afield all day long. We also like the idea of a Titanium action in a small-caliber, carry-around varmint rifle. With a low-recoiling cartridge such as the 20 Vartarg or .223 Remington, it makes sense to have a light-weight rifle that’s easy to pick up and move around.
One of our Forum members asked us the question: “Does anybody make a good range box with cradles for cleaning at the bench?” The answer is yes — the MTM model RBMC Range Box offers slide-in plastic cradles that provide a reasonably sturdy platform for a quick clean when you’re done shooting. The RBMC box also offers plenty of storage for jags, brushes, solvents, ammo boxes and other miscellaneous gear you need for the range.
Among the many range boxes available, the MTM model RBMC Range Box leads the pack in terms of versatility. It is rugged, it has plenty of storage space, and it doubles as a handy cleaning station. This Editor has used the MTM Range Box to clean rifles and as a “range expedient” rifle holder when adjusting scopes and tensioning action screws. It’s a good product that does the job and stands up to rough handling.
Fitted Cleaning Cradles
The key feature setting MTM’s RBMC apart from most range boxes is the rubber-coated cradle system. Wide enough to fit a 3″-wide fore-arm, the cradles slide into vertical slots on either end of the box. This allows your range box to serve as a maintenance station. The RBMC is really pretty stable in this role, and the cradles won’t mark your stock. The cradles even feature slots on each side to hold your cleaning rods. The MTM Range Box is secure enough to stay in place when you’re brushing the barrel. However, if you’re working on a carpeted bench top, keep one hand on the box when running a cleaning rod through the bore, just to ensure the box doesn’t slide.
Versatile Upper Tray with Dividers
The MTM Range Box has two major components — the box base (with cradles), and a large upper tray with hinged top and carry handle. This large upper tray clamps securely to the bottom unit for transport. The top tray has a long section that holds cleaning rod guides, long brushes, grease syringes and the like. There are two, clear-plastic fitted divider trays. These will hold your patches and jags, plus comparators, ring wrenches, and other small tools.
What Might Be Improved
Though we really like the MTM Range Box, it’s not perfect. First, we wish the box was a bit deeper, to have added carrying capacity. The dimensions of the MTM Range Box are: 25″ long x 11.5″ wide x 8.75″ high. We’d like to see it 12″ high/deep to allow larger solvent bottles to stand upright and to provide more space to carry tools and shooting muffs. However, it is deep enough to hold the large 100-round MTM cartridge boxes that are popular with many shooters (see photo at right).
While we like the twin clear plastic dividers that fit into the removable top-tray, but we wish the dividers had individual hinged tops. This would keep small items more secure.
The MTM Shooting Range Box RBMC-11 (green version) is on sale now for $39.03 at Amazon.com, with FREE shipping. MTM also offers a black “tactical” version of this product for a bit more money ($43.93 at Amazon). This Tactical Range Box includes a special bracket that supports AR-type rifles through the magazine well.
Nosler has just introduced a new SAAMI-spec .338-caliber cartridge, the 33 Nosler, which is based on the 404 Jeffrey parent case. This efficient new cartridge rivals the velocity and energy of the proven .338 Lapua Magnum while using significantly less powder. AND, the Nosler 33 fits in a standard, long action receiver. Accordingly the 33 Nosler should be popular with extreme long range (ELR) shooters and big game hunters. The 33 Nosler fires .338-caliber bullets which are tough on big game and typically boast high Ballistic Coefficients and sectional densities. For long-range target work, Nosler will offer 33 Nosler match ammo with a high-BC 300gr bullet.
Notably, the 33 Nosler will fit in a standard-length Long Action. That’s a big deal because it means you can now achieve .338 LM performance in a rifle that is lighter and less costly to build. Nosler lists a 3.340″ COAL for the 33 Nosler. Compare that to 3.681″ for the .338 LM. Nosler will offer loaded ammunition as well as 33 Nosler brass.
The above chart was created by Nosler. It shows the 33 Nosler can push a 225gr AccuBond at 3025 fps and the 265gr AccuBond at 2775 fps. That’s 275 fps faster (with 20% more energy) than the .338 Winchester Magnum using the same length action. According to the chart, the 33 Nosler is also 25 fps faster than the .338 Lapua Magnum at the muzzle while burning 18% less powder. However, the numbers quoted by Nosler for the .338 LM are conservative.
The 33 Nosler® is SAAMI-standardized for consistent industry-wide brass and chamber dimensions. Nosler will be supporting this new cartridge with Nosler Brass, factory ammunition, and Nosler factory rifles. Expect 33 Nosler products to be available in early 2017.
Wouldn’t it be great if a power screwdriver could also serve as a two-station case prep machine? Well now that’s possible with Hornady’s new Case Prep Duo. This rechargeable unit has a battery-powered motor that drives a dual spindle head. The back half of the unit rotates and tilts so you can use the tool in pistol grip mode or with a straight (inline) body. NOTE: The photo above shows the SAME tool in both modes — angled grip mode and inline mode.
Hornady says that “this cordless, rechargeable multi-function tool accommodates case neck brushes, primer pocket cleaners, and chamfer/deburr accessories. With the easy-to-swivel body and integrated rubber feet, use it in the straight configuration on your bench top, or rotate it … for an ergonomic, handheld power tool. Use with the 8-32 spindle head for various reloading functions or remove the spindle head and use as a powered screwdriver with standard 1/4-inch hex bits (not included).” The Case Prep Duo comes complete with deburr and chamfer heads, plus plug-in charger. The unit is affordable — MSRP is just $64.59 and we expect “street price” to be around $55.00.
IMPORTANT: The Case Prep Duo has a removable dual-drive (twin spindle) head. You can remove that head and use the Case Prep Duo as a standard, powered screwdriver. WATCH the VIDEO (at 00:20) to see how this works.
Creedmoor Sports has launched a completely redesigned, “new and improved” website. You’ll find it easier to navigate, with improved search funchtionality, and a more mobile-friendly interface. Check out the updated site at: www.CreedmoorSports.com.
To help celebrate the launch of its updated website, Creedmoor Sports is running a big SALE this weekend on premium rifle cases. Creedmoor makes some of the best soft rifle cases you can buy. They are constructed with premium materials and can be ordered in sizes big enough for long match rifles.
Do you have some old, tired brass that needs a thorough cleaning — inside and out? Consider using an ultrasonic cleaning machine. When used with the proper solution, a good ultrasonic cleaning machine can quickly remove remove dust, carbon, oil, and powder residue from your cartridge brass. The ultrasonic process will clean the inside of the cases, and even the primer pockets. Tumbling works well too, but for really dirty brass, ultrasonic cleaning may be a wise choice.
Our friend Gavin Gear recently put an RCBS Ultrasonic cleaning machine through its paces using RCBS Ultrasonic Case Cleaning Solution (RCBS #87058). To provide a real challenge, Gavin used some very dull and greasy milsurp brass: “I bought a huge lot of military once-fired 7.52x51mm brass (fired in a machine gun) that I’ve been slowly prepping for my DPMS LR-308B AR-10 style rifle. Some of this brass was fully prepped (sized/de-primed, trimmed, case mouths chamfered, primer pockets reamed) but it was gunked up with lube and looking dingy.”
UltimateReloader.com Case Cleaning Video (7.5 minutes):
Gavin describes the cleaning exercise step-by-step on UltimateReloader.com. Read Gavin’s Cartridge Cleaning Article to learn how he mixed the solution, activated the heater, and cycled the machine for 30 minutes. As you can see in the video above, the results were impressive. If you have never cleaned brass with ultrasound before, you should definitely watch Gavin’s 7.5-minute video — it provides many useful tips and shows the cleaning operation in progress from start to finish.
Ultra Dry Necks After Ultrasonic Cleaning — Some Suggestions
The Ultrasonic cleaning process gets cartridge brass so “squeaky clean” that increased force may be required to seat your bullets, or they may “grab” as they go in the necks. To reduce bullet-seating effort, you may benefit from adding a little dry case lube inside the case-neck before loading (use a nylon brush). Another trick is adding a teaspoon of Ballistol lube to the cleaning solution. That provides a trace lubricant inside the necks, but does not interfere with powder ignition in any way.
The RCBS ultrasonic cleaning machine features a large 3-liter capacity, 60 watt transducer, and 100 watt ceramic heater. The RCBS ultrasonic machine can be found under $140.00, and this unit qualifies for RCBS Rebates ($10 off $50 purchase or $50 off $300.00 purchase). RCBS also sells 32 oz. bottles of cleaning concentrate that will make up to 10 gallons of Ultrasonic Solution.
Commercial Chamber Length Gauges May Not Work with Custom Chambers
What Might Be Improved
