Halloween is just ten days away. Talented trick-shot artist Kirsten Joy Weiss, did something special in prep for the gouls/goblins holiday, “carving” a pumpkin using her semi-auto Volquartsen .22 LR rifle. Kirsten had to send a lot of rimfire rounds into her orange friend. It turns out the little .22-caliber bullets worked better on exit than entry — Mr. Pumpkin’s posterior side was more impressive than his front. But overall, the effort turned out very well indeed, as you can see. Nice job, Kirsten.
On inspection, Kirsten found that the most impressive Jack ‘O Lantern face appeared on the reverse side of her pumpkin. The “exit wounds” were better than the entry holes.
If you want to see the world’s best multi-gun shooters in action, head to Henderson, Nevada this weekend. Henderson’s Pro Gun Club hosts the 2016 SureFire World Multi-Gun Championships, a challenging day + night, high-round-count match with 16 fast and furious stages. Earlier this week fun matches were held at Henderson, but the main event kicks off Friday, October 21st and runs through Sunday, October 23rd. The main match, with 16 grueling stages, is a real test of shooter and equipment. This unique match combines various Multi-Gun and 3-Gun competition shooting styles, with stages influenced by USPSA Nationals stages, speed stages, outlaw stages, large Ironman-style stages, open-terrain stages, and even low-light night stages (as shown below).
With an extensive prize table and some of the top competitors in the world, this will be one of the most important multi-gun matches of the year. For more match information, visit www.Surefirewmg.com. Match photos and results will be posted on the Surefire Multi-Gun Championship Facebook Page.
While this is an impressive photo of Matt Loganbill shooting last year’s night stage, Surefire lights might actually do a better job illuminating the stage.
Here are two stage maps for this year. Note the number and variety of targets! CLICK to ZOOM.
Ammo A-Plenty — 780 Rounds To Be Fired By Each Competitor Over Course of 16 Stages
The 2016 course of fire includes sixteen (16) stages. All three guns will be used on almost all the stages, except for the night stages. There will be plenty of ammo sent down range this year. Each competitor will be shooting roughly 780 rounds of rifle, pistol, and shotgun ammo:
Rifle: 260 rifle rounds, some 50-yard shots and a spinner. In addition there will be 20 rounds of rifle over the berms with two shots past 350 yards. Pistol: 280 pistol rounds, but there will be many paper and steel options. Shotgun: 200 normal shotgun rounds, plus 15-20 slugs.
We first saw Lyman’s new automated target system at SHOT Show in January and we liked it. This new Target System from Lyman has a motor-driven roll of targets that can be “refreshed” with a radio remote-control. Here’s how it works — a 50-foot-long target roll is mounted in the top on the target stand. When you’re ready for a new target, push a button and a fresh target rolls into place. The radio remote-control activates a battery-powered electric motor that conveniently rolls a new target into place after the current target is shot out. The remote-control works at distances up to 200 yards. NOTE: This target system is rated for rimfire and air rifle use only — no centerfire.
There are currently four (4) target roll options: Five Bullseye Target, 11-Bull Smallbore Target, Silhouette Target, and Varmint Target. MSRP is $229.95; street price is around $200.00 on Amazon.
Lyman states: “The new Lyman Auto-Advance Target System offers shooters the ability to change targets at up to 200 yards with the press of a button! No more walking downrange to replace targets, or waiting for cease-fires! The Auto-Advance Target System is battery-operated, so there is no need for wires and power outlets, plus it disassembles easily for transportation back and forth to the range. The Auto-Advance Target System has steel protection plates that are rated for use with all rimfire calibers. The Auto-Advance Target System comes with a roll of standard bullseye targets. Additional 50-foot target rolls are available with bullseye, animal and silhouette designs.”
Lapua, maker of premium brass, bullets, and loaded ammo, has released a new, state-of-the-art Ballistics program that runs on smartphones and mobile devices. The all-new Lapua Ballistics Mobile App is the first mobile ballistics app utilizing the 6DOF calculation model. 6DOF refers to “Six Degrees of Freedom”, referring to the multiple variables the software calculates. As explained below, a 6DOF solver can account for 3 components of movement PLUS 3 components of rotation. Of course, as with other ballistics software, the Lapua Mobile App looks at Bullet BC, velocity, and cross-wind effects. This software can also account for subtle, extreme long range factors such as the Coriolis Effect.
Notably, the new Lapua Ballistics App includes a library of up-to-date bullet profiles based on extensive field tests with Doppler Radar. Having an ultra-sophisticated 6DOF solver combined with Doppler Radar data makes the Lapua Mobile App one of the most accurate ballistics Apps on the market. Lapua Ballistics offers the latest, Doppler-proven Lapua cartridge and bullet data for you to combine with your firearm and local weather information. The App also includes the option to define custom bullets.
The Lapua Ballistics App is available for Android and iOS smart phones and mobile devices free of charge. For more info, visit www.lapua.com/lapuaballisticsapp.
6DOF, the most accurate calculation method. Lapua cartridge / bullet information. Distance, wind speed and angle. outputs numerical, reticle, table and graph views, metric and imperial values. Set Point Blank-range to different sight-in distances and impact windows. Define custom bullets ( BC G1 or G7 and Siacci method), Pre-set max 4 powder temperature.Sight-in-POI, Coriolis calculation
There is a new tactical action from Canada with some very interesting features. The innovative U300 Bolt Action from Ultimatum Precision features a Rem 700 footprint and three-lug bolt with 60° bolt lift (like a Barnard). The floating bolt head is quickly removable, so you can swap to a different rim size in a few minutes. Another interesting feature is a special “Battery Safety”. The firing pin can only protrude from the bolt face if the lugs are locked and in battery. This ensures that if the bolt head is not properly installed, the rifle does not fire.
The black Cerakoted U300 action is strong and tough — the 4340 steel is hard-nitrided for surface durability. The action-maker says the hard nitride and Cerakote coatings improve wear resistance, corrosion resistance, chemical resistance, and hardness. The U300 action fits AICS-compatible detachable box magazines.
Designed for Savage-type Barrel Nuts
The Ultimatum U300 system was design to accept a barrel nut so “pre-fit” barrels (configured for the U300 bolt) can be easily installed (or swapped) by the owner with no gunsmithing required. The U300 uses standard 1-1/16″ x 16 Remington 700 tenon threads, so it can fit pre-chambered barrels with Remington-style threading. NOTE: Barrels headspaced properly by a smith can also be mounted conventionally without a nut. The user can choose the system he prefers.
Ultimatum U300 Action features:
· Removable Floating 3-Lug Bolt Head
· 5/16″ Integrated Recoil Lug
· Battery Safety
· 20 MOA Picatinny rail, secured with six #8-40 bolts and two pins
· 4340 Steel with Hard Nitride Finish and Cerakote.
· Compatible with AICS-style magazines
Ultimatum Precision has started shipping the first U300 short actions. Suggested MSRP starts at $998.00 U.S. Dollars. The action-maker plans to release both a long action model and a .338-specific model later this year. Ultimatum Precision is located in Abbotsford, BC, Canada, with a subsidiary in Washington state, USA. For more info, visit www.UltimatumPrecision.com.
Forum member Danny Reever and this Editor recently discussed how novice reloaders can struggle with the fine points of reloading, making errors in seating depth, bushing choice, or sizing their cases. We agreed that a good resource covering more than “Reloading Basics” is sorely needed. Danny reminded me that Glen Zediker’s excellent Handloading for Competition book has been available since 2002. Danny says this may still be the best guide in print for those getting started in precision reloading, though the book is not without flaws.
Danny observed: “I consider this still the best book out there on the subject. I’ve bought a lot of other books only to be sorely disappointed after spending $30-$40 of my hard-earned cash. This book is not one of those! I’ve read and re-read Zediker’s treatise at least four times and refer to it often for advice while reloading. My number one suggestion for those who buy the book is to sit down with a highlighter and read it cover to cover. It’s well-written with a bit of humor and it is not boring.”
Extremely comprehensive, Zediker’s book covers nearly all of the key factors involved in accurate reloading: case sorting, brass prep, load development, neck-sizing, full-length sizing, bushing selection/use, tool selection, priming, powder measurement, and bullet seating. The book also explains how to test and evaluate your ammo, and how to monitor and interpret pressure signs.
There are many “must-read” sections in Zediker’s book, according to Danny: “The section beginning on page 161 dealing with concentricity (and how to achieve it) is excellent. Likewise the Load Limits section discussing pressures offers very valuable advice and info. You should also read Zediker’s commentaries about load testing, powders (burn characterics etc.), and the effects of temperature.”
Zediker has conveniently provided a detailed summary of his book on the web, complete with table of contents, sample pages (PDF format), and dozens of illustrations. Shown above is just one small section that covers ejectors.
Overall, we recommend Glen Zediker’s Handloading for Competition, though the book definitely could use some updating. Danny says: “Plunk down the [money] and buy this book, you won’t be sorry.” Zediker’s book is available from Amazon.com ($30.25), Sinclair Int’l ($28.99), and Zediker Publishing ($34.95).
Here’s an example of world-class benchrest shooting. Charles Huckeba of Texas was the top individual shooter at the 2013 World Benchrest Championships (WBC) held near Sydney Australia in October 2013. In this video, 2013 WBC Two-Gun Overall winner Charles shoots a 1/8th MOA group at 200 yards — “a little bitty dot” as a fellow Team USA shooter observes. That’s impressive. If you can describe Huckeba’s style in a nutshell it would be “smooth, consistent, and rapid but not hurried”.
Charles also employed some unusual hardware. In the video, take a close look at the joystick on the Farley Coaxial front rest. There’s no knob at the end. In its place is a small, wood ammo caddy. Charles removed the standard knob from the handle of his Farley rest and replaced it with a home-made wood block that holds cartridges for the record target. The 10.5-lb Light Varmint rifle is chambered in 6PPC with a BAT Machine Action and a composite wood and carbon-fiber stock.
Watch Charles Huckeba Shoot 1/8 MOA, 200-yard group at World Benchrest Championships
Here is the actual 200-yard, 5-shot group Charles shot in the video. Photo (by Stuart Elliot) taken through the lens of Huckeba’s 50X March scope (reticle has 1/16th MOA Dot).
Analyzing the Fine Points — What Makes Huckeba So Good
Short-range benchrest shooter Boyd Allen saw some interesting things in Huckeba’s WBC performance, as captured on video. Boyd noticed Huckeba’s smooth gun-handling and efficient loading. But Boyd also spied some interesting equipment, including an innovative joystick “handle-caddy”.
1. Low Friction Bags — When Huckeba slid his rifle, there was very little apparent friction. The front bag features the new 3M material (ScotchLite) on the sliding surfaces. The rear Protektor bag has ears of the same low-friction material.
2. Pause Before Chambering — While he was watching the flags and deciding when to start firing, Charles kept his first round in the action, but out of the barrel’s chamber, probably so as not to heat the cartridge and change the round’s point of impact.
3. Ammo Caddy on Joystick Arm – Charles shoots a Right Bolt/Left Port action, so he pulls his rounds with his left hand. Note that Huckeba’s record rounds rest in a small, wood ammo caddy attached to the end of the joystick shaft. Look carefully, you’ll see the wood ammo block in place of the normal black ball at the end of the joystick. That allows Charles to pull shots with the absolute minimum of hand movement. Ingenious! Huckeba is very fast, with a great economy of motion. I believe that because his ammo was literally at hand, Charles was better able to keep his focus on aiming and the flags.
4. Smooth-Cycling BAT Action — Note how smoothly Huckeba’s action operates. When Charles lifts the bolt handle (to extract a round and cock the firing pin), this does not disturb the rifle. Likewise, as he closes the bolt, the gun doesn’t wobble. The smooth action allows Charles to hold point of aim even when shooting relatively quickly. Huckeba’s BAT action is chrome-moly steel. Some shooters believe this metal makes for a smoother action than stainless steel or aluminum.
5. Long-Wheelbase Stock — The wood and carbon fiber stock is light, long, and stiff. Yet, importantly, the stock is also well-damped. The longer-than-average stock length (with extended forearm) seems to help the gun track well without jumping or rocking. The longer forearm allows a longer “wheelbase”, effectively shifting the weight distribution rearward (less weight on the front, more weight on the rear). This places a greater share of the gun’s weight on the rear bag, as compared to a more conventional benchrest stock. Huckeba’s stock, built by Bob Scoville, is at the cutting edge of short-range benchrest design. Its light-weight balsa wood and carbon fiber construction provides a combination of stiffness and vibration damping that allows its relatively long fore-end to be fully utilized to increase the weight on the rear bag (always an issue with 10.5-pound rifles).
To learn more about this benchrest stock design, read the comments by stock-builder Bob Scoville in our PPC with Pedigree story in our Gun of the Week Archives. Bob observed:
“There is a lot more to the structure of the stocks than meets the eye. The carbon fiber skin with which I cover the stocks creates a light, tough exterior surface. However, this contributes very little to the overall performance of the stocks. The real strength and stiffness is the result of an internal beam utilizing balsa core/carbon fiber technology.
This type construction can be found in aircraft, race cars, powerboats, and sailboats. It is interesting to note, balsa has the highest strength to weight ratio of all woods and carbon fiber is one of the lowest stretch (modulus of elasticity) relative to weight of all materials. The marriage of these two materials is common in the high-performance world. Additionally, balsa is used commercially for vibration dampening and sound reduction.”
Video find by Boyd Allen. Video by Stuart Elliot of BRT Shooters Supply, Brisbane, Australia.
Ever wonder how shotshells are manufactured? Here’s a step-by-step trip through the shotshell production process, courtesy Federal Premium. Hulls are created from plastic pellets, of various colors, depending on shotshell type and gauge. Starting with pellets, here’s how shotshells are made:
Step 1: Plastic pellets are melted down into a plastic tube.
Step 2: In the extruding process the tube is heated, stretched, and cooled to form the hull. The machine that does this is called the “Riefenhauser” after the German engineer who built the first model.
Step 3: Hulls are cut to length as they come off the Riefenhauser. They then move along to the next stage in the process.
Step 4: The case head is stamped out of sheets of metal (brass or steel depending on shell type). A series of strikes of the stamp produces a fully-formed case head with flash-hole.
Step 5: The hulls move to the primer insert and heading machine to get primers and case heads.
Step 6: Still untouched by human hands, the shell moves on to the loader where it gets its powder charge, shot wad, and pellets.
Step 7: The hulls are then crimped, labeled, and readied for inspection and packing.
Story tip from EdLongrange. We welcome reader submissions.
Be prepared to have your mind blown by Max Michel. This guy is FAST. In this video he puts 18 shots on three targets with two (2) reloads, in a total of 4.79 seconds. That’s right, drawing from holster, he sends 18 rounds in under five seconds, with two mag changes in the process. That works out to a rate of fire of 225 rounds per minute. Consider this — Max shoots faster than a 19th-century Gatling Gun (which had a rate of fire of roughly 200 rounds per minute). And Max is accurate as well as speedy — 16 of Max’s 18 shots were in the targets’ A-Zones, with the other two just barely outside.
At age 30, Max Michel is a legend within the world of competitive shooting. A four-time World Speed Shooting Champion, six-time USPSA National Champion, and three-time US National Steel Champion, Max is a dominant force in pistol shooting sports. Born and raised in New Orleans, Louisiana, Max began shooting when he was just 5 years old. In 1999 Max joined the USAMU’s Action Pistol Team and served in the U.S. Army for 10 years as an Army shooter and trainer. Today, Max is recognized worldwide as a top-tier athlete and instructor.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. CDNN Sports — Ruger American .270 Win, $289.99
If you’re looking for a good deer-hunting rifle at a super-affordable price, check out this .270 Winchester Ruger American. It comes with a gray-blue digital camo finish that actually suits gray fall days pretty well. The long action sits in a integral bedding block, and features a three-lug bolt with 70° bolt lift. The 22″ hammer-forged barrel has a 1:10″-twist, so it’s capable of shooting the most popular .270-caliber hunting bullets. Ammo is held in a flush-fit rotary magazine. The Ruger American is a good, solid rifle — and this is a steal at $289.99. If you don’t like the finish, buy a $5.00 can of spray paint.
2. Grafs.com — SK Standard Plus at $5.99 per Box
This is very good European-made rimfire ammo at an affordable price. SK Standard Plus is much better than most low-priced rimfire ammo. This is a good choice for cross-training, fun plinking, or rimfire tactical matches. When we don’t need ultra-high-quality Eley or Lapua match .22 LR ammo, we’re happy to shoot SK Standard Plus. The Grafs.com priceincludes shipping (after one flat $7.95 fee).
3. Midsouth — FREE Hat with Lee Pistol Die Sets
Lee pistol dies are not expensive, but they work perfectly well for most handgun cartridges. We like the fact that Lee’s three-die sets come complete with a shell-holder and dipper. We use Lee dies ourselves for 9mm Luger and .380 ACP reloading. Right now Midsouth has a special offer — buy any pistol die set (starting at $30.56), and you get a FREE Midsouth hat (green or khaki). We recommend the 3-die carbide die sets. These include Carbide Full Length Sizing Die, Bullet Seating Die, Powder-Thru Expanding Die, Universal Shell Holder, and Powder Dipper. All the elements (dies, shell-holder, dipper) fit inside a convenient see-through plastic storage case.
The RCBS Rock Chucker remains a classic — a big, strong, versatile press that can handle most reloading chores with ease. And now you can get a genuine Rock Chucker Supreme for $126.99 — a very good deal. The Rock Chucker offers plenty of leverage for case-sizing and the “O” is tall enough for long cartridges. The Rock Chucker has a very strong base and should last a lifetime. We’re not fans of the Rock Chucker’s priming system but most serious reloaders use a separate priming tool.
This is a very good spotting scope for the price. Yes it gives up some low-light performance to a spotter with an 80mm objective, but otherwise it is a good performer, and we can’t think of much that will touch this Vortex Diamondback spotting scope for anywhere near the $399.99 sale price. Choose from angled or straight version for the same $399.99 price, which includes the 20-60X zoom eyepiece.
6. Natchez — RCBS ChargeMaster Dispenser, $279.99
Here’s a very good deal on the popular RCBS ChargeMaster combo scale/powder dispenser. This unit sells elsewhere for up to $389.00. You may want to act quickly as sale pricing changes frequently and many other vendors have recently raised their prices. Grafs.com sells this for $369.99 now while the current Amazon.com price is $296.99. You can save a lot through Natchez right now. NOTE: There is an RCBS Rebate Program in effect now — if you spend at least $300.00 on “RCBS tools and accessories” you can get $75.00 back.
7. Home Depot — 72″ Wood Workbench for $75.36
This patented Home Depot workbench assembles in a few minutes. Simply unfold the legs, pop in the shelf, and you are ready to start your project. Made from Premium 2×4 Hemlock fastened with glue and screws, this workbench is a great value. The bench (72″ wide x 35″ high x 22″ deep) can easily be stored when not in use. NOTE: The wood is unfinished (can be painted or stained).
This is a pretty darn good folding knife, and a killer deal at under $20.00 from Amazon.com. Yes your Editor bought one. The semi-serrated stainless steel blade is sharp and holds its edge surprisingly well. The knife comes with a nylon sheath and a Bear Grylls survival guide. Despite its low cost, Gerber offers a lifetime warranty on this knife.
Here is a verified owner’s review: “Most retailers sell it for 30 bucks. This knife is…very sturdy with no blade play and has a good solid feel. The handle is very grippy… [and] fits VERY nicely in the hand. Love Gerber’s serrations… great for cutting rope, cordage and strapping.” Note — this price has been fluctuating. There was one Amazon seller at $19.85 with Free shipping, Click link at right to see multiple price options.
Forum member Danny Reever and this Editor recently discussed how novice reloaders can struggle with the fine points of reloading, making errors in seating depth, bushing choice, or sizing their cases. We agreed that a good resource covering more than “Reloading Basics” is sorely needed. Danny reminded me that Glen Zediker’s excellent 
3. Ammo Caddy on Joystick Arm – Charles shoots a Right Bolt/Left Port action, so he pulls his rounds with his left hand. Note that Huckeba’s record rounds rest in a small, wood ammo caddy attached to the end of the joystick shaft. Look carefully, you’ll see the wood ammo block in place of the normal black ball at the end of the joystick. That allows Charles to pull shots with the absolute minimum of hand movement. Ingenious! Huckeba is very fast, with a great economy of motion. I believe that because his ammo was literally at hand, Charles was better able to keep his focus on aiming and the flags.
