Most shooters know Carl Bernosky as a 10-time National High Power Rifle champion. But you may not realize that Carl is also a very talented stock-maker and rifle-builder. Carl crafts a wide variety of wood and wood laminate stocks for competition as well as hunting. He also crafts many stocks for Alex Sitman of Master Class Stocks.
Master Class Low-Profile F-Open Stock
Here is a new Master Class Low-Profile F-Open Stock crafted by Carl Bernosky. It is made from a Cherry/Maple wood laminate. This design features a railed fore-end along with a flat, parallel toe for improved tracking and stability on the bags. The front section of the fore-arm has a low profile. This allows the barrel bore axis to ride lower. That helps reduce hop and helps the gun recoil straight back. For more information on this low-profile F-Open stock design, visit Carl Bernosky’s Facebook Page and MasterClassStocks.com.
Note that the stock maintains full depth under the action and quite a few inches forward of the action. This smart design feature is very important. We have seen other low-profile stock designs that can flex or “hinge” forward of the action because there’s not enough wood material there. In fact, the only part of the stock that needs a cut-down profile is the front 10″ or so, where the stock actually rides the front bag.
This particular stock features a “pop-off” magnetic cheekpiece, as well as a buttplate that adjusts for Length of Pull (LOP) via spacers. The action is by Pierce Engineering. This and other Master Class Stock designs can be customized with other features on request.
Many of our readers have concealed carry permits. When carrying a handgun concealed, holster choice is key. A good holster will carry more comfortably, “print” less, and be 100% secure while still allowing rapid access. Our systems admin Jay C. recently acquired a Walther PPS M2 as a carry gun. Jay has a CCW permit, and he sometimes chooses to carry a concealed handgun, particularly on trips.
After looking at many options, Jay chose a Kydex Clinger ATom Holster. These are very affordable, yet they have many great features. The most important design feature of the $19.99 Clinger Atom is the location of the belt clip. This is placed over the trigger guard area, not the slide. This pulls the grip in closer than if the clip was mounted over the slide as on other holsters. This smart design feature really works, improving concealment and comfort. Jay says: “the Atom works great with my little Walther — it’s very stable and comfortable.”
The $19.99 Clinger Atom also offers adjustable “ride height”. This is accomplished by moving the belt clip up or down. Holster retention (the clamping tightness) is easily adjusted with a simple hex screw.
Along with its popular Atom holster, Clinger offers two other holsters: 1) the $29.99 Stingray model (with choice of 0°, 15°, or 30° cant); and 2) the dual-clip, ultra-thin No-Print Wonder Holster priced at $59.99. The latter is a good choice for carrying a heavier pistol for long periods. All three holsters (Atom, Stingray, No Print Wonder) are shown in the video above.
Clinger offers a Zero-Risk Guarantee. Try any Clinger holster for two weeks. If you don’t like it, you can return it for a full refund. There is also a “Bumper-To-Bumper Lifetime Warranty”. If anything on your Clinger Holster ever needs repair the manufacturer will repair it or replace it for free.
Readers often ask “What’s the difference between a Weaver scope rail and a Picatinny Rail?” The answer is not as simple as it seems. The dimensions of a Picatinny Rail should be consistent (from one rail-maker to another), since there IS a government spec. Conversely, there is some variance in “Weaver-style” rails. The width of the groove is the most important difference between Picatinny Rails and weaver rails. “Mil-spec” Picatinny rails will have a grove width of 0.206″ while Weaver rails typically have a narrower, 0.180″ groove width.
Brownell’s has a helpful GunTech™ Article that discusses the Picatinny Rail vs. Weaver Rail. That article explains:
“What are the differences between the ‘Picatinny’ and the ‘Weaver’ systems? The profile of the two systems is virtually identical. Depending on the quality of the machining done by the manufacturer, the two systems should be indistinguishable from the profile. The key difference lies in the placement of the recoil grooves and with width of the grooves. MIL-STD-1913 (Picatinny) grooves are .206″ wide and have a center-to-center width of .394”. The placement of these grooves has to be consistent in order for it to be a true ‘Picatinny’MIL-STD system. Weaver systems have a .180” width of recoil groove and are not necessarily consistent in a center-to-center measurement from one groove to the next.
In many instances, a Weaver system has a specific application that it is machined for, so interchangeability is not necessarily an issue. A MIL-STD-1913 system must adhere to the specifications listed above in order for it to be considered MIL-STD, since the military desires uniformity in the recoil grooves to allow for different systems to be mounted on the weapon with no concern for compatibility.
Now, what does this mean to you? Boiled down, it means that accessories designed for a Weaver system will, in most cases, fit on a ‘Picatinny’ system. The reverse, however, is probably not the case. Due to the larger recoil groove, ‘Picatinny’ accessories will not fit a Weaver system. There are, of course, exceptions to every rule, but for a good rule-of-thumb, [full-width] ‘Picatinny’ won’t fit Weaver, but Weaver will fit ‘Picatinny’.”
In case you haven’t heard, Sierra has a great new 7mm match bullet, the 183 grain MatchKing (item #1983). This bullet boasts an impressive 0.707 G1 Ballistic Coefficient (BC) at 2300+ fps. These bullets also have very consistent bullet-to-bullet BC, thanks to the tips being “pointed” at the factory. Sierra explains: “A final meplat-reducing operation (pointing) provides an increased ballistic coefficient for optimal wind resistance and velocity retention.” Top F-Open shooters have told us that these bullets shoot exceptionally well, with minimal vertical dispersion at 1000. “Holding waterline” at long range is a reliable indicator that the BC is very uniform from bullet to bullet.
The design of this bullet represents a radical departure for Sierra. The 7mm 183gr MK employs a new bullet shape with a special geometry: “To ensure precise bullet-to-bore alignment, a unique bearing surface to ogive junction uses the same 1.5 degree angle commonly found in match rifle chamber throats.” Mark Walker, Sierra Product Manager, explains: “We thought instead of using the typical ogive radius that can allow slight misalignment, why not use the same straight angle that is used in the chamber leade on the bullet ogive to force itself to always align with the bore? Once past that area, we use a traditional high caliber ogive radius[.]”.
Insight Into Sierra’s New 7mm MatchKing® by Sierra Product Development Manager Mark Walker
In late 2015, Sierra introduced a new 7mm MatchKing® bullet with a different type of ogive. As part of the introduction, I had the opportunity to use them at the F-Class Nationals held in Phoenix with very good results. While at the match, several people had questions about what exactly was different about the ogive on this bullet as opposed to our tried and true blended tangent ogive. So with that in mind, hopefully this blog will answer those questions.
In the past, Sierra has typically used a tangent radius ogive design on our MatchKing® bullets. This is one of the most forgiving ogive designs due to its ability to shoot extremely accurately when jumped, as well as, jammed into the rifling. On rare occasions, some of our MatchKing® bullets have used a secant ogive due to design constraints. However, this ogive is much more sensitive to changes in seating depth than the tangent ogive so we tend to shy away from it. When we decided to work on this new bullet, we wanted to see if we could improve on the accuracy of even our best shooting tangent ogive bullets.
One of the main factors of what makes an accurate shooting bullet is how it aligns itself with the bore when fired. If a bullet is slightly crooked when entering the bore, it will cause inaccuracy on the target. We set out trying to think of ways to make sure that the bullet has no choice but to align itself with the bore perfectly.
The first part of the barrel to encounter the bullet is the leade in the chamber. The leade is an angle that is cut into the leading edge of the rifling which helps to guide the bullet into the bore. To illustrate how current bullets fit into the leade, picture a cone (leade) with a ball (bullet) sitting inside it. The ball can be rotated in all directions and the cone cannot force the ball to orientate itself in any particular direction. When a bullet with a radius encounters the leade, it behaves in a similar way. Now this of course is a very simple example and of course advanced shooters use tight necks and brass that is perfectly formed to the chamber to make sure the bullet is aligned as perfect as possible. However, there is always a small element of misalignment that is possible even with all this precise preparation.
This brings us to the ogive on the new 7mm MatchKing®. We thought instead of using the typical ogive radius that can allow slight misalignment, why not use the same straight angle that is used in the chamber leade on the bullet ogive to force itself to always align with the bore? Imagine the same cone as above (leade) with an identical cone (bullet) sitting inside of it. The cone inside has no choice but to align itself perfectly with the cone that it is sitting in every time. With that in mind, we designed the area of the bullet which contacts the leade in front of the bearing surface using a straight 1 1/2 degree angle instead of the typical radius. Once past that area, we use a traditional high caliber ogive radius to provide a very sleek, high BC bullet.
I hope that explains our thought process behind this new bullet. In our testing, it is one of the most forgiving high-BC bullets we have ever made.
TV Shopping networks typically sell jewelry, housewares, and clothing items. Now there’s a new TV shopping network that will sell firearms and shooting accessories. GunTV recently launched with shows airing on cable and satellite networks (and streamed live on GunTV.tv on the web). This video unveils GunTV’s mission and explains how guns and shooting sports merchandise will be sold:
GunTV presentations combine studio sessions with range time. The hosts begin, in studio, talking about a gun’s features. Next the show may feature range footage demonstrating the firearm. Then it’s back to the studio for the sales pitch. Finally, viewers can bid on the featured item(s). Non-firearms items may ship directly to buyers. However, all actual firearms are sent to an FFL dealer, which performs background checks and handles the required paperwork.
30 Cal Gal on GunTV
One of GunTV’s hosts is our friend Anette Wachter, creator of the 30CalGal.com website. Anette, a top-level Palma and multi-gun competitor, will be testing and reviewing products, as well as selling her signature 30CalGal line of custom jewelry.
Safety is emphasized in GunTV broadcasts. The show’s creators state: “GunTV offers education, information and safety regarding firearms in America[.] GunTV is proud to offer its consumer audience an exciting mix of unique content, a wide range of firearms and related products and services, educational information, resources and entertainment, all delivered via live broadcasting on satellite and cable systems and streaming on the Internet.”
Promotional Opportunities for Manufacturers
GunTV makes money two ways. First it takes a share of sale proceeds from items sold. In addition, it gets promotional fees from product makers. If you have a shooting-related product you want to see featured, you can advertise on GunTV. You can apply online using the Product Submission Application form. GunTV charges fees for its airtime segments and advertising spots and advertising spot production services.
Guns are big money. In the past seven years, the dollars generated by the production and sales of guns and ammo have more than doubled. In fact, total economic impact of the firearms and ammunition industry in the United States increased from $19.1 billion in 2008 to $49.3 billion in 2015, a 158% increase. Meanwhile the total number of gun industry full-time jobs rose from approximately 166,000 to almost 288,000, a 73% increase in that period, according to a report released by the National Shooting Sports Foundation (NSSF), the industry’s trade association. Read NSSF Report HERE.
On a year-over-year basis, the industry’s economic impact rose from $43 billion in 2014 to $49.3 in 2015, a nearly 15 percent increase while total jobs increased from approximately 263,000 to almost 288,000, a 9 percent increase in the same period.
“Our industry is proud to be one of the truly bright spots in our economy as an unprecedented number of Americans have chosen to exercise their fundamental right to keep and bear arms and to safely enjoy the shooting sports,” said Stephen L. Sanetti, NSSF president and CEO. “We have increased our direct workforce by about 21,000 in the last two years alone, adding jobs that pay an average of more than $50,000 in wages and benefits.”
The Firearms and Ammunition Industry Economic Impact Report: 2016 provides a state-by-state breakdown of job numbers, wages and output covering direct, supplier and induced employment, as well as federal excise taxes paid. Access the full report here.
Bart Sauter of Barts Custom Bullets has acquired a LabRadar chronograph. He was curious to see how his loads performed in actual match conditions, so he brought his LabRadar to a match and set it up right on his benchtop. What he learned was quite surprising. For one thing, Bart found that tuning for the best accuracy (in the conditions), was NOT simply a matter of maintaining velocity. Read all about Bart’s experience in this AccurateShooter Forum Thread.
LabRadar Report by Bart Sauter
Bart posted: “I shot a short range NBRSA match [in March] with the LabRadar on the bench! The benches were quite close, but the LabRadar was able to pick up my shots even with the other guns going off very close to it. This is a pretty impressive piece of gear.”
It’s great for tuning. I can’t say for sure but what I saw with the PPC is that just maintaining a certain velocity will not keep the gun in tune.”
One Forum member asked: “Was the LabRadar able to pick up shots that far back (behind the muzzle) and to the side? What setting did you have it set at?”
Bart’s LabRadar unit had no trouble picking up shots when set on the bench, a bit behind the muzzle. In fact, Bart noted: “Yes it can go a long way back. At home I could get back up to around 8 feet and pick up the bullet. It’s more sensitive about the side distance. I had mine on level 4. You can be a lot farther behind the muzzle then advertised. You can also point it at your buddy’s target and get his velocity.”
Bart set his LabRadar to be triggered by the shot: “I had a tuner on the gun but no muzzle brake. [The Chrono] was set to be triggered by the sound of the gun. When you move back you have to play with the trigger level. I put mine on a tripod and was able to pick up projectiles 8 feet back, but from the side had to be within 18 inches.”
Long-Life Battery Power
Powering the LabRadar at the range is not a problem. Bart used a portable battery pack that can power the LabRadar for a long time: “I bought a RavPower battery pack from Amazon.com. It was the most powerful compact cell phone charger they had and [it costs about $30.00]. It was able to run the LabRadar for two full days without recharging and still had juice.”
The LabRadar is a pretty expensive piece of kit, but there’s nothing else like it on the market. Bart notes: “The LabRadar itself is about $560.00. The stand is $29.95 for the bench mount and the padded carry case is $39.95. So you’re around $630.00 plus shipping.”
LabRadar Field Test by Ray Gross
If you are considering purchasing a LabRadar Chronograph system, we strongly suggest you read the very thorough and informative LabRadar Review by Ray Gross, Captain of the USA F-TR team.
Have you ever left your plugs or muffs at home when you took a trip to the range? That’s happened to most of us. That won’t be a problem now, so long as you have your eye protection. Browning now offers ANSI-rated safety eyewear that includes corded NRR 25 earplugs stored in the frames. That’s a clever design — one less thing to worry about.
Browning’s new Sound Shield shooting glasses feature ear plugs stored on a retractable cord in the end of the frames. Now, if you have your shooting glasses with you, you will always have hearing protection as well. The end of each sidepiece opens to release the corded retractable ear plug. The ear plugs have a NRR of 25 dB and are replaceable and washable.
Sound Shield shooting glasses feature polycarbonate, wrap-around lenses with a frameless design to provide additional coverage and eliminate blind spots. The glasses are available in two different styles (Large/Medium) with either yellow or lightly-tinted indoor/outdoor lenses. All lens types exceed ANSI Z87.1 impact standards. A soft rubber standoff nosepiece reduces slipping and lens fogging. According to the Browning website, these Sound Shield glasses may be offered in a kit that includes NRR 27 ear muffs, but we don’t know if that is available yet.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
Here’s a rifle with a smooth three-lug action and good trigger that can take any game in North America. The Browning A-Bolt is justifiably respected as a solid hunting rifle. The 300 Winchester Magnum chambering offers serious hitting power, even at long range. This rifle, with a blued barreled action, normally retails for $600.00+. Now it’s on sale for under $500.00. What’s more Browning will pay the sales tax (up to 8%). That’s right, Browning is currently offering a Sales Tax Rebate for any Browning firearm purchased before April 30, 2016. That will save you forty bucks in states with 8% sales tax.
2. Brownells.com — AR15 Stripped Lower, $59.99
This small pin lower receiver is precision-machined from a 7075 T6 aluminum forging. This versatile, mil-spec lower can be the foundation for rifle builds on 5.56/.223, 6.5mm, 6.8mm, 300 AAC Blackout or other chamberings. Holes, inletting and pin locations have been cut to final dimensions and accept standard AR-15 magazines and components. Right now this Aero Precision lower is on sale at Brownells for just $59.99.
3. Midsouth — Lyman BoreCam Digital Borescope, $222.46
Note: We are repeating this special (first listed last week) because it is the best deal we’ve found on an excellent product in high demand. The Lyman BoreCam is an electro-optical borescope with a digital display. You can record “stills” on a SD card. This is one of the hottest products on the market right now — so hot that it has been back-ordered at most vencdore. But we found some in stock at a great price. Midsouth Shooters Supply now has the BoreCam for $222.46. Grab it while you can at that price. Other online vendors are charging a LOT more (e.g. MidwayUSA price is $259.99).
4. BassPro Shops — Federal .22LR Target Ammo, $4.79/50 Rounds
This Federal Gold Medal Target ammo is MUCH better than common bulk rimfire ammo, yet with this deal, it is only 9.6 cents per round. That’s cheaper than most other .22 LR ammo that’s anywhere near as good. This special is available now from Bass Pro Shops webstore. In addition, Bass Pro is currently offering Free Shipping on orders over $50.00.
Like the RCBS ChargeMaster, this Lyman Gen6 Powder System will automatically dispense and weigh powder charges. This unit features a touch screen, rapid warm-up, anti-static/anti-drift technology, and electronic shielding to resist interference from other electronic devices. It’s a good deal at $205.99.
6. Midsouth — Lyman Bleacher Loading Blocks
Lyman’s new Bleacher Block stepped cartridge holders are great. Use the different levels for sorting brass. Or, migrate the brass from top to bottom as you proceed through case prep stages. Made of durable polymer, Bleacher Blocks are molded in three sizes. The smallest size (with 0.388″-diam holes) fits .223 Rem-size case heads. The middle size (with 0.485″-diam holes) fits .308 Win-size case heads. The biggest Bleacher Block has 0.565″-diameter recesses for magnum-size cases. All three cartridge block sizes hold fifty (50) rounds. Purchase any size for just $5.90 per Block at Midsouth.
7. Monmouth Reloading — 1000 Lake City 5.56 Cases, $68.95
1000 pieces of Lake City brass for under seventy bucks? Yep, that’s a deal and a half. Monmouth Reloading is selling genuine, once-fired Lake City 5.56x45mm brass, thick-walled and sourced direct from the U.S. Military. Monmouth reports: “Our current stock of Lake City 5.56 looks to be all newer year Lake City head stamp but may contain a small percentage of other NATO headstamps. Lake City is a popular, reliable brass, normally capable of many reloads.” Monmouth includes 1% overage to account for any damaged brass. NOTE: Brass has crimped primers, so the pockets will need to be reamed or swaged prior to reloading.
8. Amazon — Leight MAX NRR33 Earplugs, $7.58 for 50 Pairs.
These Howard Leight NRR33 Max plugs are your Editor’s favorite foam earplugs. Between shooting, motorcycling and mowing lawns, I probably have Max plugs in my ears 2-3 days a week. This is a very good price for a bulk pack of 50 pairs. And if you act soon, you can get free shipping to boot.
The latest digital edition of Shooting Industry Magazine offers a run-down of hot products at SHOT Show 2016. In this FREE April edition, you’ll find a SHOT Show in Review article, a “Show Stoppers” guide to Buyers’ favorites, a list of products you may have missed, as well as a 2016 New Product Showcase. For anyone interested in new shooting products, you really should read this special April issue cover to cover. This year’s SHOT Show, held January 19-22 in Las Vegas had more than 1600 exhibitors, with a record number of new products on display.
Show Stoppers from Las Vegas
One of the Show Stoppers highlights was a quad-barrel AR Kit. The new Multi-Caliber System (MCS) from Windham Weaponry offers plenty of bang for the buck. The kit comes with four different barrels: .223 Rem, 7.62x39mm, .300 Blackout, and 9mm Luger. The gun’s modular design makes it easy to change calibers by swapping barrels and magazine wells. (That’s right, you change the magwell to fit the caliber — a smart idea. That way you can run proper AK-style 7.62×39 magazines). One dealer stated: “You can get all four conversion kits in a hard-sided case at a decent prices. The fact you can change calibers so quickly is going to make this a big seller.”
New Product Showcase
Along with the Show Stoppers Guide, this April issue of Shooting Industry Magazine featured “Products You May Have Missed At SHOT Show” as well as a New Product Showcase. The Showcase highlights interesting new products from Benelli, Browning, Colt, Kimber, Nikon, McMillan, Nosler, Polycase, and many other leading brands.
