The verdict is in — Lapua’s new 6.5 Creedmoor brass is ultra-tough and very consistent. So sayeth the 6.5 Guys, who recently field-tested the brass, loading it to very stout levels. Even after 20 reloadings, the Lapua 6.5 CM brass held up extremely well. This brass, with its small primer pocket and small flash hole, really does out-perform other 6.5 Creedmoor brass offerings. Yes the Lapua brass is pricey, but it outlasts the alternatives, and, if the 6.5 Guys test is any indication, you can run higher velocities with this brass compared to other brands. Watch the 6.5 Guys Lapua brass test in this video:
If you have a 6.5 Creedmoor rifle, or are considering getting a gun chambered for this cartridge, we strongly recommend you watch the full 6.5 Guys Video. Ed and Steve spent a lot of time conducting this test, and the video includes helpful summaries of their findings.
The Evolution of the 6.5 Creedmoor
Over the last few years the 6.5 Creedmoor cartridge has become increasingly popular among precision rifle enthusiasts. However, availability of brass cases was limited to only a few manufacturers. In early 2017 Lapua introduced to the market its own 6.5 Creedmoor case with a unique twist — the case has a small rifle primer pocket and small flash hole — like the 6mmBR Norma and 6.5×47 Lapua.
Lapua 6.5 Creedmoor Brass — Test Protocol
The 6.5 Guys tested a box of Lapua 6.5 Creedmoor cartridge brass supplied by Graf & Sons. The project involved two phases. First the 6.5 Guys weighed and measured the cases to assess weight uniformity and dimensional consistency (which was impressive). Then came phase II — the “torture test”. The 6.5 Guys loaded the brass with a very stout charge of H4350 pushing 140gr Hornady ELD bullets*. The brass was loaded and shot over 20 times. This durability test was conducted to see how many repeated firings and resizing/reloading cycles the brass could handle. Remarkably, after 20+ loadings, the brass was still holding up — no “blown-out” primer pockets. This stuff is tough. The 6.5 Guys note: “You can go at least 20 reloadings without a split neck…but brass spring-back may be another issue.”
After 20 Load Cycles — Going to the Extreme
Once the Lapua cases had been shot 20+ times, the 6.5 Guys tried something more extreme. They stuffed the brass with a very hot load — a powder charge weight well beyond a sensible maximum. Even with this “beyond max” load, the Lapua brass held up but there was some evidence of pressure on the primers: “You do see some cratering on the primer with a Remington 700 that you don’t see with a Defiance action, but nothing to indicate a potential pierced primer.”
WARNING: The 6.5 Guys deliberately used a very stout load for testing. Do not attempt to duplicate. This load was shot in a faster-than-average barrel with a chamber set up for long 140gr bullets. You may not be able to achieve similar velocities — maybe not even close. As with all hand-loading, always start low and work up charges in small increments.
6.5 Creedmoor vs. 6.5×47 Lapua — Battle of the Middle-Weights
With this new brass, does the 6.5 Creedmoor enjoy an edge over the 6.5×47 Lapua? The 6.5 Guys answer: “That’s hard to say. From a market share standpoint, the 6.5 CM is more popular in the USA. From a technical perspective, 6.5×47 Lapua offers near identical performance with better barrel life. But from our tests, you can drive a 140-grain bullet much faster with 6.5 Creedmoor than you ever can (safely) with a 6.5×47 Lapua. That’s our non-answer answer….”
The 6.5 Guys concluded that the 6.5 Creedmoor will enjoy a velocity advantage: “We’ve had a number of discussions with RBros and other folks about this. It appears that 6.5×47 still has the edge as far as barrel life. But it also looks like you can push a 140gr bullet pretty fast with the 6.5 CM — speeds that are not obtainable with the 6.5×47 Lapua.”
* Why were the Hornady 140gr ELDs chosen for testing? The 6.5 Guys wanted a bullet in the 140gr weight range. Beyond that, the choice was fortuitous. Ed explained: “Our bullet selection was quite scientific — we sat down at my reloading bench and looked around. Saw the Hornady 140 ELD Match and decided to roll with that.”
6.5 Creedmoor vs. Other Mid-Sized 6.5mm Cartridges
The 6.5 Creedmoor is a very popular cartridge with the tactical and PRS crowd. This mid-size cartridge offers good ballistics, with less recoil than a .308 Winchester. There’s an excellent selection of 6.5mm bullets, and many good powder choices for this cartridge. When compared to the very accurate 6.5×47 Lapua cartridge, the 6.5 Creedmoor offers similar performance with less expensive brass options. For a tactical shooter who must sometimes leave brass on the ground, brass cost is a factor to consider. Here’s a selection of various 6.5mm mid-sized cartridges. Left to right are: 6.5 Grendel, 6.5×47 Lapua, 6.5 Creedmoor with 120gr A-Max, 6.5 Creedmoor with 142gr Sierra MK, and .260 Remington.
When asked to compare the 6.5 Creedmoor to the 6.5×47 Lapua, Rifleshooter.com’s Editor stated: “If you don’t hand load, or are new to precision rifle shooting, get a 6.5 Creedmoor. If you shoot a lot, reload, have more disposable income, and like more esoteric cartridges, get a 6.5×47 Lapua. I am a big fan of the 6.5×47 Lapua. In my personal experience, the 6.5×47 Lapua seems to be slightly more accurate than the 6.5 Creedmoor. I attribute this to the quality of Lapua brass.” But now that Lapua is producing top-quality 6.5 Creedmoor brass with small primer pockets, we could have a “second generation” 6.5 Creedmoor that rivals ANY mid-sized cartridge for efficiency AND accuracy. We will soon know how well the 6.5 Creedmoor cartridge performs with Lapua brass.
The first shipment of Lapua 6.5 Creedmoor brass has arrived in the USA. It features a small flash hole and small primer pocket. We have some for testing…
New Lapua 6.5 Creedmoor Brass Field Tests Soon
Our friends at 65Guys.com will be testing the new Lapua 6.5 Creedmoor brass next week. The goal will be to determine if Lapua’s new Small Primer Pocket/Small Flash Hole brass allows higher velocities than American-made brass (Hornady specifically). In addition the 6.5 Guys want to see how well the new Lapua brass holds up after dozen (or more) firing cycles. They’ll hammer the new brass pretty hard to see how it fares with repeated stout loads. Stay tuned…
Here are three tables from the Sierra Bullets Reloading Manual (5th Edition). IMPORTANT — This is just a sample!! Sierra has load data for many other 6.5mm bullet types, including FB, Spitzer, SBT, HPBT, and Tipped MK from 85 grains to 142 grains. To view ALL 6.5 Creedmoor DATA, CLICK HERE.
INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.
INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.
INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.
The Precision Rifle Series (PRS) for tactical bolt guns has become hugely popular. Capitalizing on that success, the PRS has approved a new Gas Gun series for semi-auto rifles such as AR15s and AR10s. Since the launch of the PRS a few seasons back, Gas Gun shooters have wanted to play. Recognizing the interest among semi-auto shooters, the PRS ran two “prototype” Gas Gun matches last year.
PRS Director Shawn Wiseman Explains New Gas Gun Series in this Video:
Based on positive feedback from the 2016 test matches, PRS founders approved a full 2017 Gas Gun series which kicks off this week. The 2017 PRS Gas Gun Series opener will be held February 17-19, 2017 at the CORE Shooting Solutions range in Baker, Florida. Here’s a video showing CORE’s facility:
For the new PRS Gas Gun Series, rules and scoring procedures needed to be developed. Accordingly, a committee of top PRS shooters, Multi-Gun shooters, and Match Directors was assembled to develop the PRS Gas Gun Series Rule Book. Highlights of the Rules are listed below.
Last month, Shooting Sports USA interviewed PRS President Shawn Wiseman. In a Question and Answer session, Wiseman outlined key elements of the new “Gasser” PRS series. Here are samples from that interview:
SSUSA: What will be the format of the 2017 PRS Gas Gun Series matches?
Wiseman: The matches will be a two day format with 8 to 10 stages per day. No more than 50 percent of the stages can be unlimited round count and 25 percent of the targets must be 2 MOA or smaller. The scoring will be overall time plus penalties with the winner being the shooter with the fastest time including all penalties. There are three Divisions; Tactical Light for 5.56x45mm NATO/.223 Rem. rifles, Tactical Heavy for 7.62x51mm NATO/.308 Win., and Open for everything else up to .30 cal. The maximum distance will be 800 yards.
SSUSA: What guns do you expect to be popular?
Wiseman: In the Open Division, I expect to see a lot of 6.5 Creedmoors for two main reasons; it’s an inherently accurate cartridge and Hornady makes great ammo for the folks that aren’t into reloading. I think the Tactical Light Division will probably be the most popular. It is hard to say specifically what rifles will be the most popular but there are a few AR companies that are known for the accuracy. Armalite, GA Precision, LaRue and Seekins will all be very popular rifles in this Series. I think we will continue to see high-end optics with 5 to 6X zoom range on the rifles. Bushnell, Kahles, Leupold, Nightforce and Vortex will continue to be the most popular.
PRS Gas Gun Series Rules
For the new PRS “Gasser” Competition, the PRS developed rules on gun types, scoring, match timing, penalties, safety and other key topics. CLICK HERE for Full PRS Gas Gun Series Rules.
Scoring and Penalties
The Gas Gun Series utilizes a time plus penalty-based scoring system for all match scoring. This means the score is the shooter’s total combined time on all stages plus any penalties accrued.
Penalties are as follows:
30 seconds for any rifle targets not engaged or neutralized.
15 seconds for any pistol targets not engaged or neutralized.
15 seconds for hitting a “No Shoot” target.
No more than 50% of the stages at a match can utilize an unlimited round count. At least 25% of the targets in Gas Gun Series match must be 2 MOA or smaller. Maximum distance is 800 yards.
Open Division: The Open Division rifles will not exceed a caliber of .30 or a velocity of 3,200 fps. A match DQ will result any rounds over the speed limit of 3,200 fps (+/- 32 fps for environmental factors and equipment discrepancies). Match Officials may request at any point during a match that a competitor fire their rifle through chronograph. If the bullet exceeds the 3,200 fps speed limit, the shooter will receive an automatic match DQ.
Tactical Light Division: Intended to allow competitors the opportunity tocompete using traditional military and law enforcement caliber. This promotes Active Duty military and law enforcement competitors use of their Service and Department-issued rifles. Tactical Light Division rifles are restricted to 5.56 NATO/.223 Remington calibers only. Bullet weight cannot exceed 77 grains and muzzle velocity cannot exceed 3,000 fps.
Tactical Heavy Division: Intended to allow competitors the opportunity to compete using traditional military and law enforcement caliber. This promotes Active Duty military and law enforcement competitors use of their Service and Department issued rifles. Tactical Heavy Division rifles are restricted to 7.62 NATO/.308 Winchester calibers only. Bullet weight cannot exceed 178 grains and muzzle velocity cannot exceed 2,800 fps. No modified wildcat rounds permitted to shoot in the Tactical Divisions Anyone discovered violating this rule will receive an automatic Match DQ. Tactical Division shooters will shoot the exact same COF as Open Division shooters.
Here’s a comprehensive “reveal” of the latest and greatest rifle optics for 2017, thanks to our friends Ed and Steve, aka the 6.5 Guys. These two hard-working dudes visited dozens of product booths during SHOT Show, producing over 40 video interviews for 6.5guys.com. Below we’ve included the 6.5 Guys’ videos for Nightforce, Vortex, and Schmidt & Bender. Plus you’ll find links to other videos for Burris, Bushnell, Steiner, and U.S. Optics. Enjoy these videos, and for more great coverage of SHOT Show, visit the 6.5 Guys’ YouTube Channel.
NIGHTFORCE Optics — New for 2017
The big news at Nightforce’s SHOT Show booth was a new First Focal Plane (FFP) ATACR with a five times zoom range. The new 7-35x56mm ATACR offers tactical and long range shooters the ability to go from a wide field of view at seven power, all the way up to very high 35X magnification. That makes this one scope that can truly “do it all” — from short-range moving targets to 1000 yards and beyond.
VORTEX Optics — New for 2017
Vortex is releasing a new “Gen II” series of Viper PST riflescopes. The versatile Viper PST series can work for many disciplines — Target Shooting, 3-Gun, Hunting, or Precision Long Range. The new second generation PSTs offer many improvements.
NEW 2-10×32, 3-15×44, and 5-25×50: Vortex offers a wide magnification range with these three new PSTs. Each offers tall tactical turrets and side-focus parallax adjustment with integrated illumination. To ensure reliable return-to-zero, all new models feature the patented RZR Zero Stop from the Razor HD 5-20×50 riflescope. Reticles include Vortex’s new EBR-4 and EBR-2C with MOA or MRAD stadia to match your turrets. First Focal Plane reticles are available on select models.
SCHMIDT & BENDER — New for 2017
Schmidt & Bender had many premium riflescopes on display, none more impressive than the recently-introduced 5-45x56mm PM II “super-zoom” optic. This impressive (and razor-sharp) scope offers a remarkable 9X zoom ratio. That makes it suitable for a wide variety of shooting disciplines. A tactical competitor can dial back to 5-power for a wide field of view on close-in targets. Or, for 1000-yard shooting, crank the scope all the way up to 45-power. S&B says the scope is intended for “tactical ultra-long-range shooting”.
Also on display was the 5-25x56mm PM II Digital BT — this Bluetooth-enabled scope can project data from external devices, such as laser rangefinders, into the field of view. S&B is leading the way in the integration of optics and digital devices.
And There’s More — Burris, Bushnell, Steiner, and U.S. Optics
The 6.5 Guys also visited other optics makers including Burris, Bushnell, Steiner, and U.S. Optics. There were interesting offerings from all these scope manufacturers. Click the links below to watch four more 6.5 Guys videos covering new developments in the sport optics arena. The videos focus on products for tactical/practical and long-range shooting.
Shown is a new .338 Lapua Magnum rifle from Israel’s IWI. Impressively beefy rig.
For folks in the gun industry, the third Monday in January is the best day of the year. Held in conjunction with SHOT Show, Media Day at the Range lets us try out dozens of new rifles and pistols, as well as meet top gun designers and friends in the shooting sports. We saw some very interesting new products this year. Here are some of the most interesting “take-aways” from Media Day at the Range 2017 on January 16th.
Most Innovative — “The FIX” Rifle from Q
The star of Media Day, at least in the rifle category, was “The FIX”, a new modular rifle from the Q Team. This innovative rig features a totally unique bolt system with a 45° lift and a bolt housing that runs on rails (literally). This thing cycles fast and smoothly.
The trigger, set at 2.5 pounds, was one of the best we’ve ever tried on a centerfire factory rifle. One has to admire the engineering on “The FIX”. This new rifle has definitely “raised the bar” for tactical-style rifles. It’s different, it works, and it offers real advantages for both hunters and tactical style shooters.
Savage 10 with Ergonomic GRS Stock
Perhaps the most ergonomic rifle we shot all day was the new Savage GRS-10 in a stiff, composite GRS stock. European-crafted GRS stocks feature a very comfortable hand-grip, plus fully adjustable cheek-piece and adjustable length of pull. As shown this rifle is very affordable for PRS production-class competition.
To be frank, this Editor liked this rifle more than the Ruger Precision Rifle. A lot more. The GRS stock fit better, the Savage bolt cycled much more smoothly, the trigger was better, and the magazine seated more easily. If you don’t have to be “tacticool” with a metal stock, you should definitely consider this Savage. The new Savage GRS-10 will be offered in 6mm Creedmoor, 6.5 Creedmoor, and .308 Win chamberings. Here’s a video review by Guns America.
Blacktical Bolt-Action Rifles — The PRS Influence
We saw many new (or upgraded) PRS-style bolt action rifles in modular aluminum frames. There were offerings from Savage, Bergara, Tikka, and more. We’ll provide a more thorough run-down on these new guns next week. We really liked the new Tikka T3x TAC A1, while tactical shooters Ed and Steve (aka the 6.5 Guys) were impressed with the new Bergara: “Bergara has in-sourced chassis and triggers to produce very high quality offerings at a very competitive price. Handling, shooting and cycling the bolt on the $1150 MSRP Hunting and Match Rifle would lead one to believe the price tag was a mistake (maybe the first digit should have been a 2). We felt the same when we got behind the $1,699 Bergara Match Precision Rifle.”
Tikka T3x TAC A1
Bergara Match Precision
Pistols — The Sounds of Silence
The most interesting handgun on display was SilencerCo’s Maxim 9, which features an integral suppressor. It looks bulky but it felt relatively normal in the hand. The silencer did tame muzzle lift as well as reduce sound levels dramatically. This is an impressive piece of engineering.
There were many other pistols equipped with more conventional screw-on silencers. Here is a special edition Smith & Wesson M&P model.
Optics — High-End Models from Schmidt and Bender
There were many new optics on display at Media Day, none more impressive than the new 5-45x56mm PMII from Schidmt & Bender. Led by our good friend Kyle Brown, Schmidt & Bender USA had a strong presence at Range Day, with many optics models fitted to high-end tactical rifles. Jason Baney (shown below with Kyle), used one of these rifle/scope combos to make 5 of 5 hits on steel at 960 yards.
Jason Baney checks out the new 5-45x56mm PM II with help from Kyle Brown (left).
Meeting Old Friends
One of the great things about Media Day is the chance to re-connect with old friends. At the Winchester booth, it was great to see Kim Rhode, a six-time Olympic medalist (including three golds). She is the first Summer Olympian to win an individual medal at six consecutive summer games. Kim, a Californian, is leading efforts to challenge draconian new California laws that will severely restrict how ammo is distributed and sold in California. Kim said that, under the new ammo laws, she will not be able to obtain the special “International Loads” she shoots in competition. We wish Kim well in her efforts. We believe that California’s new laws restricting the purchase of ammunition are unconstitutional and, hopefully, will be challenged successfully in court.
Along with Kim we met with our friends Steve (L) and Ed (R), aka the 6.5 Guys, along with past Top Shot Champion Dustin Ellermann (in middle below).
World Record AR Speed-Shooting by Jerry Miculek
At the Smith & Wesson shooting bay, we watched the legendary Jerry Miculek set a world speed record for 10 rifle rounds total on three targets. Before a cheering gallery of fans, Jerry drilled multiple sub-two second runs using his S&W M&P 15T semi-auto rifle. The fastest split was a 1.59 (but we’re waiting for final confirmation on that). We’re told that’s definitely a new world record. Jerry may not be getting any younger, but he’s still blazing fast. Jerry calls this 10-shot drill “STL” or Share the Love.
Ammunition — Polymer Jacketed Pistol Bullets
One of the more notable, recent developments in pistol ammo has been synthetic jacketed bullets. With a total polymer shell over a lead core, these are safer when shooting steel targets because they do not fragment like conventional, jacketed bullets. With no exposed lead or copper, there’s minimal contact between these materials and the barrel, so there’s less copper and lead fouling. Moreover, according to Federal’s test engineers, the red Syntech coating produced 12% less friction in the barrel. Here is the American Eagle 9mm Luger 115gr Total Syntec Jacketed ammo provided by Beretta at Media Day.
A good sling is a vital accessory for a hunting or tactical rifle. Along with enabling over-the-shoulder carry, a good “tactical” sling will also provide support for shooting from hasty or improvised shooting positions. In fact, in many tactical/practical precision matches there will be at least one positional shooting stage or a stage where only a sling may be used for support (that means no bipod, no tripod, no sandbags, and no shooting sticks). The 6.5 Guys, Ed and Steve, recommend tactical slings that allow quick set-up and easy adjustment. The best slings allow shooters to quickly slip into them and then make rapid fine-tuning adjustments to build a stable shooting position.
Six Tactical/Practical Slings are Reviewed in this Video:
In this episode, Ed and Steve provide an overview and compare/contrast different designs and the functionality of six popular slings from these suppliers: Armageddon Gear, Tab Gear, Rifles Only, Hard Target Interdiction, Short Action Precision, and Accuracy International.
To learn more about tactical/practical shooting disciplines, or to access more shooting gear/accessories reviews by Ed and Steve, visit 65guys.com and subscribe to the 6.5 Guys’ YouTube Channel.
Video Tip from Boyd Allen. We welcome reader submissions.
The 6.5 Guys have been testing the bargain-priced Magnetospeed Sporter chronograph. This compact chrono offers great utility at an affordable price — you can buy the Sporter for under $180.00. Strapped on your barrel, the MagnetoSpeed Sporter records velocities accurately without requiring any hardware to be placed downrange. Everything is self-contained at your shooting station, so you no longer have to waste time setting up tripods and aligning the bullet path through old-fashioned chrono skyscreens.
Watch Video Review of MagnetoSpeed Sporter by the 6.5 Guys:
The 6.5 Guys give the MagnetoSpeed Sporter two thumbs up:
“Optical chronographs have been in use for decades but can be cumbersome to deploy and don’t work well in certain weather conditions. The folks at MagnetoSpeed have addressed these shortcomings with a completely different technology that is extremely compact, cost effective, convenient to use, insensitive to weather conditions and, best of all, accurate.
We’ve been using the MagnetoSpeed since V1 and the only reason we use our optical chronographs is for situations where we cannot hang the bayonet from the gun barrel. This is the most convenient, accurate, and portable chronograph system that we have come across. You’re also less likely to damage your MagnetoSpeed when compared to optical chronographs (which seem to attract bullets). There are also a number of useful accessories available. As discussed in the video, the XFR adapter and associated smartphone application allows users with MagnetoSpeed Sporter and V3 displays to download their current (un-archived) shot series to their Android or iOS device.”
CLICK HERE for MagnetoSpeed Sporter specifications and operating instructions.
MagnetoSpeed Sporter in Stock Now at Grafs.com for $179.99
Priced at just $179.99 at Grafs.com, the Magnetospeed Sporter model costs less than half as much as Magnetospeed’s V3 models. This chronograph attaches directly to your barrel so you don’t have to go downrange to position tripods and set up skyscreens. For most people, the Sporter model contains all the features they need. READ Magnetospeed Sporter Review.
Gearlocker.nz, a New Zealand outdoor sports website, recently interviewed our friends Ed and Steve, aka the “6.5 Guys”. In this Gearlocker Video Interview, Ed and Steve cover many topics including Precision Rifle Series matches, gear selection, and effective hand-loading techniques. Kerry, the creator of Gearlocker.nz, writes: “The 6.5 Guys are Steve and Ed, two guys who decided to start documenting their progress in long-range practical precision shooting. They have built a dedicated following on YouTube and Facebook. Consistently putting out high-quality content [covering] their equipment choices and use, the 6.5 Guys have created a fantastic resource for anyone involved in shooting.”
Click image below to watch 6.5 Guys interview on Gearlocker.nz:
Who are the 6.5 Guys? They are Steve (left) and Ed (right), a pair of avid shooters based in the Pacific Northwest. They have released dozens of helpful videos on the 6.5 Guys YouTube Channel.
You can check out the 6.5 Guys’ website at www.65Guys.com. Below is a sample from one of the 6.5 Guys’ best articles — Five Tips on getting started in practical/tactical matches.
We often meet people who are new to long range precision shooting, and want to improve their knowledge and skill level. However, they aren’t sure if they are ready to sign up to compete in a match. They often ask, “What knowledge or skills [and gear] are necessary to compete in a match?”
TIP ONE: Make Plans and Commit to Go
First you need to start by finding a match to attend. We recommend starting with any match that may be within a reasonable driving distance. This may likely be a local “club” match, many of which are held on a regular basis. Once you decide on the match you want to attend, do your homework. This means finding out if you need to pre-register or pre-pay the match fee. Commit to going by registering for the match and putting it on your schedule.
Our good friends Ed and Steve (aka “The 6.5 Guys”) have just released an in-depth product review of the AMP Annealing system. Produced in New Zealand, the AMP (Annealing Made Perfect) unit is a sophisticated, microprocessor-controlled annealing machine that achieves ultra-consistent results through an electrical INDUCTION process.
AMP Annealing Machine Review by the 6.5 Guys:
Ed was so impressed with the AMP annealer that he purchased his own AMP to replace a carousel-type, dual-torch annealer he previously used. Ed tells us that “once you have the correct setting for your brass the AMP’s results are repeatable every time.” By contrast, Ed explained, “with butane torch systems you have to adjust the system when the ambient temperature changes, or even if your butane fuel is slightly different.” Ed says that, with his AMP system, he can anneal a case every few seconds. Yes it does require manually handling each case but “the actual annealing process is so fast, this really isn’t a big issue.”
If you want to extend the useful life of your precious cartridge brass, then you should definitely consider annealing. And if you are in the market for an annealer, the new AMP machine deserves serious consideration. Though not inexpensive, it achieves excellent results according to the 6.5 Guys.
6.5 Guys’ AMP Annealer Review Key Points:
1. The AMP machine provides complete peace of mind that you are annealing properly — there is no guesswork. With a propane machine you have to calibrate dwell times which can be error prone. Even if you don’t change out your cartridge, dwell times will vary with temperature changes as this affects the propane pressure.
2. We noticed that the AMP machine produces brass that is more like factory brass from a hardness standpoint. Despite all our efforts and research around calibrating our propane machines, brass never seemed returned to factory condition and shoulder spring-back would increase with each reloading so we had to adjust our sizing dies. When a cartridge comes out of the AMP it is very, very close to new condition.
3. One of the things we dreaded was setting up our propane machine for different cartridges. With Ed’s OCD he would spend a good 30 minutes making sure everything was perfect. With the AMP machine you simply change out the pilot and select the proper program. It’s really straight-forward.
NOTE: We strongly recommend you read the Full AMP Annealer Review on 65guys.com. It contains a detailed explanation of the machines’ operation and the reviewers explain the pros (and cons) or the machine compared to flame-type annealers.
The current price for the AMP Annealer, with three pilots of your choice, is $995.00 USD. Additional pilots are $20.00 USD. For more info, visit www.AMPAnnealing.com.
Jewell triggers are still the most-used triggers on competition benchrest and F-Class rifles and they are also popular for hunting, varmint, and tactical rifles (with or without safeties). While a Jewell trigger can work for years with minimal maintenance, if the trigger becomes gunked up, it may be necessary to disassemble the trigger for a thorough cleaning. Our friends Ed and Steve, aka the 6.5 Guys, have produced a helpful video that shows how to disassemble and then reassemble a Jewell trigger.
Why You May Need to Disassemble Your Jewell Trigger — the 6.5 Guys
Jewell triggers are a popular choice in the sport of long range precision shooting, and like everything else require regular cleaning and maintenance. In most cases they can be cleaned with charcoal lighter fluid or dropped into an ultrasonic cleaner. Should the situation require, they can be completely disassembled according to the Jewell Trigger Manual.
We ran into a situation where we had to dissemble a trigger due to the entrapment of some sticky dirt that couldn’t be removed with an ultrasonic cleaner. Our first step was to find some step-by-step instructions but we couldn’t find anything.
Recognizing that other shooters might be in the same situation we produced a step-by-step guide and video, published in full on 65Guys.com. These instructions will work with a left- or right-handed trigger. In our case we worked with a left-handed BR model trigger with safety and bolt release.
Step-by-Step Instructions are provided on 65Guys.com website. We recommend you read all the instructions carefully before you even think about disassembling your trigger. This video explains the process so you can get a sense of what is involved.
