|
|
December 16th, 2016
Keystone Sporting Arms has created a new rimfire rifle that shares the looks and ergonomics of the Accuracy International AICS. Keystone’s new Crickett Precision Rifle (CPR) is a single-shot .22 LR bolt action rifle that uses the barreled action from the Crickett series of rifles. Trigger pull weight is 2.5-3.0 pounds. The AICS Classic-style stock is ambidextrous, but only a right bolt, right port version of the CPR is offered at this time, model KSA2150. Stock length of pull is adjustable (via spacers) from 11.5 to 13.5 inches, and there is an adjustable cheek-piece.
The Crickett Precision Rifle should be available in January 2017 and retail for approximately $310.00. This small .22 LR bolt action should appeal to Accuracy International fans who want a rimfire rifle for low-cost cross-training. This could also be a good first rifle for a young shooter. And if Dad owns a real Accuracy Int’l AICS rifle, the little AI clone would be a fun rimfire rig for son or daughter. That way the youngster(s) could shoot a smaller version of their parent’s rifle. Like father, like son (or daughter)!
Reader Boyd Allen likes this little rifle, which has a length of pull suitable for younger shooters: “I like seeing parents taking their kid(s) to the range, developing the next generation of shooters. For the price of what some guys spend on a set of fancy rings, you can purchase this little rifle and a youngster can enjoy shooting a rimfire that looks like the real-deal tactical rigs used by the ‘Big Boys’. That’s how you capture a kid’s interest.”
Share the post "Accuracy Int’l-Style .22 LR for Rimfire Cross-Training and Plinking"
December 26th, 2015
Here’s important news for owners of Accuracy International (AI) rifles. There is now an approved AI service facility in the United States: Mile High Shooting Center (Erie, Colorado). After Mile High’s tech team received extensive training at the AI production center in England, Mile High Shooting Center has been appointed the USA’s first Accuracy International Factory Authorized Service Center.
Mile High, owned by Randy and Diann Pennington, has been an AI distributor for many years and the Service Center will be run by professional gunsmith Adam Rehor. To contact the new Service Center, email AIservice@milehighshooting.com or call (303) 255-9999.
|
Mile High Shooting Center is located in the Denver metropolitan area. The company has fully-equipped facilities to provide LEO and civilian users with factory standard spares, service, and repair for all Accuracy International rifles and equipment. |
Mile High Shooting Accessories
3731 Monarch Street
Erie, CO 80516
Toll Free: 1.877.871.9990
Phone: 1.303.255.9999
Fax: 1.303.254.6572 |
Share the post "New Accuracy International Service Center in Colorado"
January 21st, 2014
In a relatively short time, Strategic Armory Corps, LLC (SAC) has become a major player in the American firearms business. SAC has acquired three highly respected firearms manufacturers: Armalite, Surgeon Rifles, and most recently, McMillan Firearms. All three companies have been industry leaders in their market segments.
At SHOT Show 2014, the “Product Spotlight Team” visited the SAC booth. The video below features new rifles from SAC’s Armalite and Surgeon divisions. First up is the new, short-action Armalite AR-31, a .308 Win tactical rifle that borrows important design features from its big brother, the Armalite AR-30A1 (which is offered in .300 WM and .338 Lapua Magnum).
Surgeon’s New CSR and PSR Rifles on Accuracy Int’l Chassis Systems
At SHOT Show, Surgeon showcased new modular rifles built on Accuracy Int’l Chassis systems. The CSR (Concealable Sniper Rifle) is a .308 Win built with a Surgeon 591 action. The CSR is featured in the video above. Surgeon’s PSR is a .338 Lapua Magnum built around Surgeon’s beefy XL action.
Share the post "New Armalite and Surgeon Rifles from Strategic Armory Corps"
August 10th, 2013
 Need quality magazines for your repeater rifle (with AI-compatible bottom metal)? Well Pacific Tool & Gauge (PT&G) now carries Accuracy International magazines — the best you can buy for many applications. AI’s steel mags feature a durable, corrosion-resistant coating. Both springs and risers (followers) are removable for cleaning. You’ll find PT&G is offering very attractive pricing on these AI mags — check the PT&G website for the latest prices.
PT&G’s AI magazine inventory includes:
.50 BMG: AW and AX 5-rd
.338 Lapua Magnum: AICS 5-rd, AW 5-rd, AX 10-rd
.223 Caliber: AI/AICS Polymer 10-rd
.300 Winchester Magnum: AICS 5-rd, AW 5-rd, AW 10-rd
.308 Win / 7.62×51: AICS 5-rd, AX AICS 5-rd, AE MK1 5-rd, AICS 10-rd, AW 10-rd, AX 10-rd
Mags may also be used for different calibers within same cartridge family. For example, the .308 Winchester magazines will work with .243 Win, .260 Rem, and 7mm-08 cartridges.
Product Tip from EdLongrange. We welcome reader submissions.
Share the post "PT&G Now Carries Accuracy International Magazines"
October 1st, 2012
Accuracy International (AI) announced that its widely-respected AW 338 rifles will be “phased out” and replaced by AI’s more modern line of AX 338 rifles. AI explains that the AW-338 (chambered for the .338 Lapua Magnum) will go out of production because “the new AX 338 model of rifle has far more versatility and modularity.” However, please note the AW 308 chambered for .308 Winchester will continue to be produced, and it is still available to order.
News tip by EdLongrange. We welcome reader submissions.
Share the post "Accuracy Int’l Discontinues AW 338 but AW 308 Remains"
April 4th, 2012
AccurateShooter.com field tester Kelly Bachand returns to Top Shot on the History Channel next week. Kelly is one of two “alumni experts” tasked with helping competitors attempt a 1500-yard shot. Along with fellow Top Shot alumnus George Reinas, Kelly guides Season 4 competitors through the longest-range marksmanship challenge ever undertaken on the Top Shot series. The show will air Tuesday, April 10th at 10:00 pm. Kelly tells us: “OK — I can finally talk about it! I’ll be on Top Shot again [next week]. I’ll be there trying to teach the shooters how to read wind so they can make a 1500-yard shot.” We asked Kelly if he was going to get one of those $2K Bass Pro gift cards for his efforts. Unfortunately the answer was ‘no': “No gift cards….Yeah I wish they gave me four of them to make up for all the elimination challenges in Season One!”
 Kelly instructs this season’s competitors in the skills needed to make a hit at 1500 yards. At right, you’ll see Kelly doing something he’s becoming very familiar with — looking through a spotting scope. At the World Long Range Championships in Australia, Kelly’s spotting skills helped keep the USA Young Eagles in the center to win both Gold and Silver. The teaser for next week’s Top Shot episode shows competitors using an Accuracy Int’l AX 338 to engage a target 1500 yards away. To make shots at that distance successfully, you need to have rock-solid fundamentals, wind-reading abilities, and ballistics info. Tune in next Tuesday to see how Kelly works with competitors trying to make the longest shot ever attempted on Top Shot.
Share the post "Kelly Bachand Returns to Top Shot as 1500-yard Shooting Coach"
January 27th, 2012
Noted gunsmith Dave Tooley saw our coverage of Accuracy International (AI) “Skins” in the Daily Bulletin, and he wanted to inform our readers about updates to AI’s AX line of rifles.
Updated 2012 AI AX Rifle for PSRII
Dave wrote: “As you know I do AI’s smithing in this country. Attached is a picture of the latest version of the AX rifle. This is what was submitted to SOCOM for PSRII the first of January. AI has incorporated a right-hand hinge to make the rifle more compact when folded. There are some other major improvements. First, the way the rails lock up on the tube now completely eliminates any chance of movement (that’s important for lasers and other things). The buttstock is now considerably lighter than the older version, and it now uses simple knobs on the cheekpiece, the LOP adjustment, and the adjustable recoil pad. I think the knobs are more user-friendly than push-buttons.”
CLICK for FULL-SCREEN Photo
New Barrel Swap Kit
The most significant improvement to the AX, according to Tooley, is the ability for the operator to change barrels with minimal tools. Tooley explains: “The complete barrel change tool-kit is one 4mm Allen wrench stored in the cheek piece. If you look at the picture you will see a screw about midway under the receiver. Loosen two captured screws under the forearm and the tube comes off. Then loosen the screw under the receiver and unscrew the barrel. This is dead simple and it works. I’ve tested six rifles with a total of 10 barrels and there were no issues. This is a great precision sniper rifle.”
Share the post "Accuracy Int’l Updated AX PSRII Rifle — Tooley Reports"
January 24th, 2012
 At SHOT Show, Accuracy International (AI) unveiled a new line of pistol-grip skins that will allow owners of the AE and AW rifles to match the ergonomics of the pistol grip on AI’s new AX rifles. This “skins” bolt on to the underlying AI chassis system, providing a new look from fore-arm to buttplate. We expect these new skins will be hugely popular among AI shooters, many of whom will ditch their old thumbhole skins and bolt on the new pistol grip models. Availability is unknown at this point, but pricing will be in line with AI’s other skins.
Share the post "SHOT Show: New Skin Kits for Accuracy Int’l AE and AW Rifles"
October 29th, 2011
Stiller Precision Firearms is now offering hard-anodized, billet aluminum bottom metal systems that work with Accuracy International (AI) magazines in Rem-style actions. Currently a short-action version is offered (for both .223 Rem and .308 Win cartridge sizes) and a long-action unit is in the works. Bottom metal for the .223 Rem fits a 10-round magazine. For the .308 Win, there are three mag options: 5-round centerfeed, 10-round centerfeed, and a 10-round, .308 double-column mag. The double-column magazines won’t work in the standard Remington action, but are perfectly suited for dedicated actions such as Stiller’s new TAC30 A/W. Current MSRP for Stiller’s DBM Bottom Metal is $295.00 with one (1) 5-round magazine.
Jerry Stiller consulted many tactical shooters before finalized the design of his new bottom metal. It contains many smart features that enhance reliability/function and simplify the installation process:
- Strong, billet aluminum construction with Mil-Spec Type 3 hard anodizing.
- Flared magwell allows fast, positive insertion of Accuracy International magazines.
- Computer-optimized truss pattern reduces weight while retaining strength and stiffness.
- Works with all commonly-available triggers for Rem and Rem-clone actions.
- “Exact-Fit” pillars and screws included to ensure a perfect fit and easy installation.
- NO SPECIAL INLET is required on the tang ends. Stiller Bottom Metal will fit into a standard BDL bottom inlet in most stocks (must meet Remington specified depths). The only cutting needed is around the magazine box. Stiller has beefed up the material in this area so that a high-precision cut is not needed.
Story tip by EdLongrange. We welcome reader submissions.
Share the post "New Bottom Metal for DBMs from Stiller Precision Firearms"
May 26th, 2011
The kickoff of the 2011 Steel Safari is just a week away, and things are heating up! Temperatures at this long-range field match are always right around 100-degrees, but this year there will be more competitors than ever (38) and a better prize table than ever before. Match organizers expect strong competition this year, as there will be many seasoned Steel Safari “alumni” competing, including recent Steel Safari Top-5 finishers. The Steel Safari takes place this year on June 3rd, 4th, and 5th at the Blue Steel Ranch located near Logan, NM. Zak Smith is the match director. You can learn more about match details and courses of fire at www.SteelSafari.com.
A true field match with no “square-range” in sight, competitors may need to use improvised and non-standard shoot positions to make shots.
The match showcases practical rifle shooting in the field. Competitors locate small and medium-sized steel targets (often hidden), range them, and engage with one shot only, under a challenging time limit. Some movement on the clock is required, and shoot positions are always improvised, the best you can do while on a reverse incline, over a rock face, shooting down a gully, or leaning out the side of a truck. To add to the challenge, these shooting stations are distributed over two different 3-mile courses in rugged desert terrain. Despite this simple general description, there are a host of individual skills that a competitor must master to place well at this match.
Besides being a test of rifle shooting skill, it also stresses rifle and gear setup and reliability, and individual concentration and mettle. After hiking around in the desert for six hours, it takes talent, determination, and good field skills to find six targets out in the terrain, range them accurately, and then quickly make the shot from sometimes very difficult shooting positions.
Rugged precision bolt rifles such as this Accuracy International are typical at the Steel Safari. The .260 Remington is one of the most common cartridges in the Winner’s Circle.
A variety of rifles, calibers, and scopes will be used at the match, but most competitors employ more or less similar gear. First, an accurate rifle is critical. Bench-rest accuracy is not required; one MOA is sufficient, but one-half-MOA is preferred. Almost everyone shoots their own hand-loads with premium bullets from Sierra, Berger, or Lapua. Ballistic data, or “dope,” completes the triad with the rifle and ammunition. Most shooters laminate a small card and tie it to their rifle or scope, or use a retractable “pathfinder” available from Allison Machine Tool or Leupold. Long-range ballistic data isn’t useful unless the target distances can be determined, and the best tool for that is a laser range-finder. Since many laser range-finders are monocular units with limited field of view, a good set of binoculars can be a life-saver when trying to find that hidden target.
Share the post "Challenging Steel Safari Match in New Mexico, June 3-5"
|
