Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









November 5th, 2012

New AR30-A1 from Armalite in .300 WM and .338 Lapua Magnum

ArmaLite has just introduced its latest bolt-action rifle, the new AR-30A1. Armalite’s AR-30A1 is available in .300 Win Magnum (24″ barrel) and .338 Lapua Magnum (26″ barrel). Both the .300 WM and .338 LM are offered in two versions: Standard and Target. The Target versions feature an adjustable stock, plus an extended Picatinny rail running forward of the action.

Armalite AR30-a1 rifle

On the surface, the AR-30A1 bears a family resemblance to its predecessor, the AR-30. But, the AR-30A1 actually shares few components from the AR-30: grip, buttpad, trigger, and a few small parts. All other components are new and/or improved. Armalite claims that the new AR30-A1 has better ergonomics, versatility, reliability, and ease of use.

Armalite AR30-a1 rifle

Features of all versions of the new AR-30A1:

  • Muzzle brake threads are suppressor industry standard (5/8 x 24 for the 300 WM and 3/4 x 24 for the 338 LM). Many suppressors can be attached without an adaptor.
  • The bolt-mounted safety mechanism locks the firing pin to the rear. This design is stronger and more secure than a sear- or trigger-blocking safety.
  • Cheek-piece supports contain integral cleaning rod guides to prevent bore damage.
  • Multiple sling installation locations allow simultaneous use of a sling and a bipod. Rear sling swivel can be moved to either left or right side.
  • The entire buttstock assembly can be quickly and easily removed with only one allen wrench. Standard and target buttstocks are interchangeable on any receiver.
  • Steel single-stack magazines. Ambidextrous magazine release.

Features specific to the AR-30A1 Target version:

  • Target rifles feature 18″-long, +20-MOA Picatinny rail over the receiver and barrel, plus rails on both sides of the forearm.
  • The buttstock can be adjusted without tools for lengths of pull from 13.6″ to 15.6″. Buttpad adjusts for height and cheek-piece offers 1″ of vertical adjustment.
Specifications — .300 WM Standard
Caliber: .300 Winchester Magnum
Barrel: 24″ Chrome Moly
Rifling Twist: 1:10
Muzzle Device: Muzzle Brake
Trigger: Single Stage
Stock: Standard
Fixed — nonadjustable
Overall Length: 46.0″
Length of Pull: 13.5″
Weight: 12.8 LBS
Accuracy: 1/4 to 3/4 MOA at 300 Yards
Included: One 5-Round Mag, Detachable Sight Rail, Hard Case, Sling, Manual
Price: $3,264.00
Specifications — .338 LM Target
Caliber: .338 Lapua Magnum
Barrel: 26″ Chrome Moly
Rifling Twist: 1:10
Muzzle Device: Muzzle Brake
Trigger: Single Stage
Stock: Adjustable Cheek Piece (height) & Buttstock (length)
Overall Length: 48.1″ – 50.1″
Length of Pull: 13.6″ – 15.6″
Weight: 15.3 LBS
Accuracy: 1/4 to 3/4 MOA at 300 Yards
Included: One 5-Round Mag, Detachable Sight and Accessory Rails, Hard Case, Sling, Manual
Price: $3,599.00
Permalink Gear Review, New Product No Comments »
January 17th, 2009

SHOT Show Report: Remington 30AR Rifles and Ammo

In October, we published a preliminary report on the new 30 Remington AR cartridge, complete with diagrams and factory load specs.

At SHOT 2009, Remington displayed Remington 30AR rifles and factory-loaded ammo. There were no great surprises. This is a short, fat cartridge (.308 bolt-face) that holds about 44 grains of H20. Case size and capacity were pretty much dictated by AR15 magazine dimensions: “According to Outdoor Life columnist John Snow: “DPMS President Randy Luth and Remington’s John Fink (brand manager for the rifle division) … both said that the goal was to look at the AR lower and see how much cartridge they could fit in there.” The Rem 30AR uses a single-stack magazine holding four (4) rounds.

Remington 30 AR

Factory Rem 30AR ammo is loaded with 125gr projectiles running about 2800 fps. While the 0.267 BC for those bullets is pretty low, the cartridge should perform its intended job of harvesting deer just fine. Jason also believes that, if the Remington-brand brass is decent, this cartridge could have real potential in Hunter Benchrest and for subsonic work.

30 Remington AR (30 RAR) Specifications

Case Capacity Rim
Diam.
Parent Cases Shoulder Factory Load Mag Type
44.0gr H20 0.473″
.308 bolt face
.450 Bushmaster
.284 Winchester
25° 125gr SP or
125 B-Tip
2800 fps
0.267 BC
4-Round
Single Stack

30 Remington AR

Permalink Bullets, Brass, Ammo, New Product, News 12 Comments »