|
|
August 3rd, 2015
It’s important to use a good-fitting bore-guide whenever you clean your barrel. A good bore-guide will keep solvents out of your action and help your cleaning rods run straight and true.
Not all bore guides are created equal. Some offer a sloppy fit and/or fail to seal your chamber effectively. 21st Century Shooting has changed all that with a new generation of chamber-specific Bore Guides. These have a close fit (with O-rings) to seal your chamber completely. The design is intelligent — these bore guides are long enough to extend well past the end of your scope, while the minimal rod diameter provides sufficient clearance for most combs. Priced at $49.99, these high-tech guide rods are custom crafted to fit many popular chamberings: 220 Swift, 223 Rem, 22-250, 6PPC, 6mmBR, 6 Dasher, 6×47, 6-284, 6mm Shehane, 243 WSM, 6.5×47 Lapua, 6.5-284, 6.5 Shehane, 6.5 WSM, 25-06, 270 WSM, .284 Win, 7mm Shehane, 7mm WSM, 30 BR, 308 Win, 30-06, 300 WSM.
Email John [at] 21stcenturyshooting.com to ask about your application. These chamber-specific guide rods are designed fit actions with BAT bolts or Rem 700-style bolts (Borden, Kelblys, Ruger, Savage).
In addition to the new chamber-specific Guide Rods, 21st Century just released a clever new product for shooters who regularly swap barrels (or who need to clean dismounted barrels). If you have a switch-barrel rig, check out 21st Century’s new Barrel Off Bore Guides. Like the full-length 21st Century bore guides, these are manufactured specifically for your chamber, for a perfect fit. These chamber-specific “Barrel Off” bore guides cost $19.99.
Product Tip from EdLongrange. We welcome reader submissions.
Share the post "New Bore Guide Products from 21st Century Shooting"
April 16th, 2015
Here’s an example of world-class benchrest shooting. Charles Huckeba of Texas was the top individual shooter at the 2013 World Benchrest Championships (WBC) held near Sydney Australia in October 2013. In this video, 2013 WBC Two-Gun Overall winner Charles shoots a 1/8th MOA group at 200 yards — “a little bitty dot” as a fellow Team USA shooter observes. That’s impressive. If you can describe Huckeba’s style in a nutshell it would be “smooth, consistent, and rapid but not hurried”.
Charles also employed some unusual hardware. In the video, take a close look at the joystick on the Farley Coaxial front rest. There’s no knob at the end. In its place is a small, wood ammo caddy. Charles removed the standard knob from the handle of his Farley rest and replaced it with a home-made wood block that holds cartridges for the record target. The 10.5-lb Light Varmint rifle is chambered in 6PPC with a BAT Machine Action and a composite wood and carbon-fiber stock.
Watch Charles Huckeba Shoot 1/8 MOA, 200-yard group at World Benchrest Championships
Here is the actual 200-yard, 5-shot group Charles shot in the video. Photo (by Stuart Elliot) taken through the lens of Huckeba’s 50X March scope (reticle has 1/16th MOA Dot).
Analyzing the Fine Points — What Makes Huckeba So Good
Short-range benchrest shooter Boyd Allen saw some interesting things in Huckeba’s WBC performance, as captured on video. Boyd noticed Huckeba’s smooth gun-handling and efficient loading. But Boyd also spied some interesting equipment, including an innovative joystick “handle-caddy”.
1. Low Friction Bags — When Huckeba slid his rifle, there was very little apparent friction. The front bag features the new 3M material (ScotchLite) on the sliding surfaces. The rear Protektor bag has ears of the same low-friction material.
2. Pause Before Chambering — While he was watching the flags and deciding when to start firing, Charles kept his first round in the action, but out of the barrel’s chamber, probably so as not to heat the cartridge and change the round’s point of impact.
 3. Ammo Caddy on Joystick Arm – Charles shoots a Right Bolt/Left Port action, so he pulls his rounds with his left hand. Note that Huckeba’s record rounds rest in a small, wood ammo caddy attached to the end of the joystick shaft. Look carefully, you’ll see the wood ammo block in place of the normal black ball at the end of the joystick. That allows Charles to pull shots with the absolute minimum of hand movement. Ingenious! Huckeba is very fast, with a great economy of motion. I believe that because his ammo was literally at hand, Charles was better able to keep his focus on aiming and the flags.
4. Smooth-Cycling BAT Action — Note how smoothly Huckeba’s action operates. When Charles lifts the bolt handle (to extract a round and cock the firing pin), this does not disturb the rifle. Likewise, as he closes the bolt, the gun doesn’t wobble. The smooth action allows Charles to hold point of aim even when shooting relatively quickly. Huckeba’s BAT action is chrome-moly steel. Some shooters believe this metal makes for a smoother action than stainless steel or aluminum.
5. Long-Wheelbase Stock — The wood and carbon fiber stock is light, long, and stiff. Yet, importantly, the stock is also well-damped. The longer-than-average stock length (with extended forearm) seems to help the gun track well without jumping or rocking. The longer forearm allows a longer “wheelbase”, effectively shifting the weight distribution rearward (less weight on the front, more weight on the rear). This places a greater share of the gun’s weight on the rear bag, as compared to a more conventional benchrest stock. Huckeba’s stock, built by Bob Scoville, is at the cutting edge of short-range benchrest design. Its light-weight balsa wood and carbon fiber construction provides a combination of stiffness and vibration damping that allows its relatively long fore-end to be fully utilized to increase the weight on the rear bag (always an issue with 10.5-pound rifles).
To learn more about this benchrest stock design, read the comments by stock-builder Bob Scoville in our PPC with Pedigree story in our Gun of the Week Archives. Bob observed:
“There is a lot more to the structure of the stocks than meets the eye. The carbon fiber skin with which I cover the stocks creates a light, tough exterior surface. However, this contributes very little to the overall performance of the stocks. The real strength and stiffness is the result of an internal beam utilizing balsa core/carbon fiber technology.
This type construction can be found in aircraft, race cars, powerboats, and sailboats. It is interesting to note, balsa has the highest strength to weight ratio of all woods and carbon fiber is one of the lowest stretch (modulus of elasticity) relative to weight of all materials. The marriage of these two materials is common in the high-performance world. Additionally, balsa is used commercially for vibration dampening and sound reduction.”
Video find by Boyd Allen. Video by Stuart Elliot of BRT Shooters Supply, Brisbane, Australia.
Share the post "“Little Bitty Dots” — World-Beating Texan Shows How It’s Done"
January 1st, 2015
Forum member K.W., aka ‘CigarCop’, has spotlighted his handsome long-range F-Class and Bench Rifle in our Forum’s Show Off Your Bat! thread. This is built with a BAT Multi-Flat action, Brux barrel, and a fiberglass McMillan F-Class stock. As you can see, it’s one handsome rifle. Be sure to click the image below to see the much more impressive wide-screen image!
The smithing was done by Bob Green and CigarCop was full of praise for Bob’s work: “I can’t really say enough about Bob Green, his attention to every detail and his ability to build an awesome shooting rifle… but once again he turned a pile of parts into a masterpiece! This irf was built on a Bat MB Multi-flat in .284 Win with a Brux 1:8.5″ twist barrel. It’s almost identical to my 6.5x47L that [Bob] also built. Once again, thanks Bob!”
Bob Green told us: “There was nothing really unusual about this build — this is the quality we try to maintain on all our guns. The barrel was chambered with the client’s reamer to a min-spec SAAMI .284 Win. The Multi-Flat BAT is pillar-bedded and bolted in, with no extra weight added to the stock. CigarCop provided the nice metal spacers on the buttstock and I polished them up. The finish is plain black but it looks good.”
Based in York, Pennsylvania, Bob Green is one of AccurateShooter.com’s recommended gunsmiths. To learn more about his Bob’s work visit GreensRifles.com, email Bob [at] Greensrifles.com, or call (717) 792-1069.
Share the post "Black Beauty — A Bat-Actioned, Brux-Barreled .284 Win"
May 26th, 2014
Gary Eliseo of Competition Machine has developed a new BX Series Tubegun system, designed for an impressive new BAT action, with a smooth, short-throw 3-Lug bolt. The new action is machined with an integral, ring-type recoil lug, which works perfectly in a tubegun installation.
Gary tells us: “We’re very proud of the new BX. We worked closely with BAT Machine of Rathdrum, Idaho to develop this outstanding system. BAT Machine took their excellent three-lug 3LL Action and re-designed the outside to fit in a special tube chassis we designed specifically for it. Two years of development and testing went into this program — we’ve had great success with our F-Class test rifle. The accuracy has been phenomenal!.” This new chassis is available in both F-Class and Long-Range Prone versions. For pricing information and expected delivery dates, call (714) 630-5734 or visit GotXRing.com and click the email link.
Angled Bag-Rider Allows Elevation Adjustment
Note the angled bag-rider or “keel” in the photo below. The angle (higher in front, lower in rear) serves an important function. This allows the shooter to “fine-tune” elevation by sliding the rifle forwards or backwards. This is very effective, and the gun stays nice and stable in the ears of the rear sandbag. No bag-squeezing required.
Story tip from EdLongrange. We welcome reader submissions.
Share the post "Competition Machine’s New BX Rifle System with 3-Lug BAT Action"
June 10th, 2013
You may recall that Forum member Rodney Wagner (aka “Eggman”) shot a 0.349″ (50-2x) group at 600 yards to set two IBS records. This is the smallest 600-yard group in history. With his BAT-actioned Dasher, Rodney put five shots inside a dime at six hundred yards. This is one of the most amazing feats of shooting ever. And now the gun is gone. It was stolen, along with a second benchrest rifle. The combined value of the two guns is over $11,000, but the record gun is priceless.
Rodney’s Record-Setting Rifle Stolen — We Need Your Help
Over the weekend, Rodney Wagner had two valuable benchrest rifles stolen from his truck. Yes, the BAT-actioned Dasher that shot the historic 0.349″ 5-shot group was stolen, along with a second long-range Benchrest Rifle. The theft took place at a motel in Hendersonville, NC.
We request the help of our readers in recovering these two rifles for Rodney. Help us get the word out — talk to your shooting friends, post this story on other forums, link to it on Facebook. Insurance, if any is available at all, will only cover a small part of the loss. But we all know that this isn’t all about the money. You can’t just write a check and buy a rifle that shoots an 0.349″ group at 600 yards. Ironically, the thieves probably have no idea of the special nature of the guns they stole.
Stolen Rifle One: IBS Record-Setting 17-lb benchrest rifle. The BAT B action has serial number B778. It has a white, gray, and black Shehane ST-1000 fiberglass stock, and a Brux 6mm barrel chambered for the 6mm Dasher. A March 10-60x52mm scope (with tactical knobs) is fitted in Burris Signature rings on top. The action is a Right bolt, Left Port, Right Eject.
Stolen Rifle Two: IBS 17-lb Benchrest Rifle. Borden Rimrock action has serial number BR0253. It has a red and black Shehane ST-1000 fiberglass stock, and Brux 6mm barrel fitted with a VAIS muzzle brake. A March 10-60x52mm scope with tactical knobs was on top. We are still looking for photos of this rifle. It appears very similar to the first rifle, but with a red and black stock and a Rimrock action.
It does NOT appear that thieves were specifically targeting the record-setting rifle. The Hendersonville Police told us that another theft was reported at about the same time in the same neighborhood. They called this “an ordinary crime of opportunity”.
Folks, please keep your eyes out for these two rifles. These are distinctive guns — not what you’d see everyday at a pawn shop (or even at most gun ranges). Please tell other folks in the firearms community to be on the look-out. Also, the thieves might try to unload the two March 10-60X Scopes separately. Look for March Serial Numbers X341 and X291. You can use this link to point people to this story: http://bit.ly/14PtT5o.
If you have any information, please contact officer Peter Laite of the Hendersonville (NC) Police Department. Call 828-697-3025 or email: plaite [at] cityofhendersonville.org
$1000.00 Reward Offered
AccurateShooter.com will provide a Five Hundred Dollar ($500.00) reward to any individual who returns the two guns in undamaged condition or provides information that leads directly to the recovery of the two guns in undamaged condition.
In addition, Rodney Wagner will pay a $500.00 reward if the two rifles are recovered intact and undamaged. This makes the total reward $1000.00. That’s $500 from AccurateShooter.com, and $500 from Rodney Wagner. |
Share the post "World Record Rifle (and Second BR Gun) Stolen from R. Wagner"
April 7th, 2012
 This past weekend, Forum member Ron Boyd shot a 1.462″ five-shot Light Gun group at 1000 yards in an IBS benchrest match at the MidWest Benchrest Club in Yukon, Missouri. Ron shot a 6mm Dasher with Bartlein barrel and PR&T stock. Ron’s 1.462″ group is 0.065″ off the existing IBS 1000-yard Light Gun record. Ron’s group also happens to be .011″ smaller than the current NBRSA 1K Light Gun record, 1.473″ shot by Bill Schrader in 2002. (But this is not counted by the NBRSA since Ron shot in an IBS match.) Ron’s group was shot in the first relay of the day, in good conditions. The group had three (3) shots clustered in under one-third inch (0.03 MOA)!
 This is truly a spectacular achievement. We think this has to been one of the smallest five-shot groups ever shot at 1000 yards, and probably the smallest ever with a 6mm cartridge. At 1000 yards, 1 MOA is 10.47″. This means that Ron’s group measured in at 0.1396 MOA! To give you an idea of how small Ron’s group really was, at left is a 1.462″ circle shown at 100% scale, along with a quarter at 100% scale.* The circle represents the center-to-center distance of Ron’s five shots at 1000 yards. Total vertical dispersion was just under 1.2″ for five shots. The vertical for the top four shots (measured with OnTarget software) was just 0.398″! Shown below is a flat-bed scan of the actual target. Notice the tight cluster of 3 shots touching. That’s a dime in the photo added for scale.
 Ron Boyd’s 6mm Dasher Load
 Ron loaded a stout charge of Long Range Match surplus powder with Spencer 103gr bullets seated about .010″ OFF the lands. The bullets were “right out of the box”, NOT pointed. This powder has burn-rate characteristics very similar to Alliant Reloder 15, and Ron used his regular RL15 charge, adjusted by half a grain or so. Ron was using no-neck-turn “brown-box” Lapua 6BR brass formed into the 40° improved 6mm Dasher case. The unturned, loaded case necks measure about 0.2695″, yielding .0015″ total clearance in a 0.271″ chamber. The brass used for the 1.462″ group had seven previous firings. Ron anneals his brass after every firing using a Benchsource annealing machine. Ron told us: “The Benchsource is the greatest annealing machine there is, as far as I’m concerned.” Ron ultrasonically cleans his brass and then tumbles his brass after the ultrasound process. He does NOT use an internal neck lubricant. He does NOT uniform his primer pockets and he does NOT ream his flashholes. Ron believes this load was running “right around 3000 fps”, but he has not chron’d it yet using the new Bartlein barrel.
Ron Boyd’s 6mm Dasher Light Gun
Ron’s 17-lb Light Gun featured a BAT SV Action, Bartlein 30″ 1:8″ twist, 0.237″ land barrel, and Precision Rifle & Tool “Hammerhead” benchrest stock with 5″-wide wings in front. This stock weighs 4 lbs 1 oz. with an aluminum butt plate and is about 36.5″ long with integrated rails on the bottom of the “wings”. Ron’s friends Rich Griffin and Jerry Kloeppel did the chambering and bedding. Ron recently put the Bartlein barrel on the gun. Ron estimates that the barrel had only 40 rounds through it when it produced the 1.462″ group. Ron tells us: “This new barrel is great, and the 5″ PR&T stock really works. I luckily pulled the trigger at the right time.” Ron told us that this rifle shot in the high ones/low twos at 100 yards during testing.
PR&T Hammerhead Stock (catalog photo)
*The circle and quarter should appear “true size” when viewed at the most common monitor resolution. If you are running a higher resolution on your monitor, the illustration will appear small than actual size.
Share the post "Ron Boyd Shoots 1.462" 5-Shot Group at 1000 Yards"
|
