HOME PAGE
Shooters' FORUM
Daily BULLETIN
Guns of the Week
Articles Archive
BLOG Archive
Competition Info
Varmint Pages
6BR Info Page
6BR Improved
17 CAL Info Page
20 CAL Info Page
223 Info Page
22BR Info Page
30BR Info Page
6PPC Info Page
6XC Info Page
243 Win Info Page
6.5x47 Info Page
6.5-284 Info Page
7mm Info Page
308 Win Info Page
FREE Targets
Top Gunsmiths
Tools & Gear
Bullet Reviews
Barrels
Custom Actions
Gun Stocks
Scopes & Optics
Vendor List
Reader POLLS
Event Calendar
HELP PAGE
> Contact Us
> ADVERTISING














Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









October 8th, 2012

Portable B&D Workmate Reloading Bench

portable reloading benchA while back, we featured a portable reloading bench built on a Black & Decker Workmate. That proved a VERY popular do-it-yourself project so we’re showing it again, in case you missed it the first time.

Texan Robert Lewis made himself a great portable reloading bench from plywood mounted to a Black & Decker Workmate. The bench, roughly 22″ x 19″ on top, folds up to fit easily in your car’s trunk or behind the seats in a pick-up truck cab. Four recessed bolts hold the wood top section to the collapsible B&D Workmate.The sides and back of the unit are attached to the base with small nails. There is a small shelf (also nailed in place) which can be used to clamp a powder measure or hold a scale. Shown in the photo is a Harrell’s Benchrest measure and Harrell’s single-stage “C” press.

Click for Larger Photo.

The whole unit can be built for about $65.00 with pine, or $80.00 with oak (as shown). Robert explained: “The Workmate was $40. If someone bought a 2’x4′ sheet of 3/4″ oak plywood, I think it is around $30. Using pine plywood would be about half that. Fasteners were $3. Spar Urethane would be $5.”

Robert told us: “I used a couple ideas I found on the web. The Larry Willis website gave me the idea to use the Black and Decker Workmate as a base. I found the Workmate on sale for $40 and the top is made from oak plywood I had in my shop. I sealed the wood with three coats of Spar Urethane. The whole thing folds into a nice package for transportation to and from the range.”

Editor’s NOTE: In the time that’s transpired since we first ran this story, the price of a Black & Decker workmate has gone up. However you can still pick a WM225 Workmate for under $60.00. Target is currently selling WM225 Workmates for $59.99.

Click HERE for FREE WORKBENCH PLANS.

portable shooting bench

Permalink Reloading, Tech Tip 8 Comments »
June 3rd, 2012

FREE Shooting Bench Plans — Eleven Do-It-Yourself Designs

Building your own portable shooting bench is a great winter do-it-yourself project. You can build a sturdy bench for well under $100 in materials. Compare that to some deluxe factory-built benches which may cost $450.00 or more.

A wide assortment of home-built shooting bench designs have been featured on the internet. Renovation Headquarters has put together a web page with plans for eleven (11) different shooting benches. Each bench is illustrated with a photo and link to FREE Plans and building instructions. You’ll find all-wood designs as well as benches that combine a wood top with a metal sub-frame or legs.

CLICK HERE for Shooting Bench FREE Plans Webpage

Among Renovation HQ’s eleven featured shooting benches, here are four designs we liked:

Larry Willis Shooting Bench

Sandwiched Plywood top, 1.5″ Galvanized Pipe Legs
Missouri Hillbilly’s
All-Wood Bench

3/4″ ACX Plywood with 4×6 Beams and Legs
Manuel Ferran’s
Steel Shooting Bench

Steel (welded) legs and frame, painted plywood top. Folds flat.
Bill Clarke’s
Basic Shooting Bench

Restaurant table Cast Metal Pedestal Base, plywood top.
Permalink - Articles, Gear Review, Tech Tip 5 Comments »
January 1st, 2012

Build Your Own Reloading Bench with FREE Plans

Serious shooters spend lots of time in the reloading room. If you want to produce great ammo, start with a good, solid bench with a very rigid working surface and plenty of storage space. Here we present three sets of FREE workbench plans. Any one of these bench designs can be a good winter do-it-yourself project for those with basic word-working skills.

Easy-to-Build Basic Bench
Simpson, maker of Strong-Tie fasteners, offers FREE Workbench Plans for a sturdy, 48″-wide bench with a pegboard backing and both upper and lower shelves. A complete list of fasteners and cut lengths is provided. For use as a loading bench with mounted presses, double-up the bench-top for extra ridigity. Without much difficulty, the plans can be adapted to build a wider bench if you prefer. The same downloadable document also contains plans for an 80″-high 6-shelf unit, a 72″-high heavy-duty shelving unit (with 4 shelves), and a 48″-wide heavy-duty table.

FREE Strongtie Bench Plans (.pdf file).

Corner Bench with Swinging Doors
The next design is rather unique — a corner bench with swing-out cabinets. This reloading bench is based on plans by M. L. McPherson as published in the October 1993 American Rifleman. The compact footprint that makes good use of corner space that is usually poorly utilized. This set of plans originally came from Ray-Vin.com. The folks who started Ray-Vin have retired, but you can still purchase many Ray-Vin products at SB Sales & Distributing.

Reloading bench plans

FREE Corner Bench Plans (330kb .pdf file)

Classic NRMA Bench with Cabinets
The last bench design is a large, versatile bench with a full set of enclosed overhead cabinets. A National Reloding Manufacturers Association (NRMA) design, this bench requires many hours to build, but it will house all your reloading gear and provide a very stable platform for your presses.This bench was designed to be as versatile as possible to meet the needs of most reloaders. However, the bench design can easily be customized. For instance, it can be made larger or smaller to meet space requirements or quantities of equipment and components. As it is currently designed, the work area is about waist-high for a 6’2″ person. This can be adjusted to fit your height simply by making the legs longer or shorter.

NRMA reloading bench

FREE NRMA Reloading Bench Plans (2.42 megabyte .pdf file).

Permalink - Articles, Reloading 3 Comments »
September 13th, 2009

FREE Plans for Heavy-Duty Workbench

Here’s a nice do-it-yourself project for the winter. Simpson, maker of Strong-Tie fasteners, offers FREE Workbench Plans for a sturdy, 48″-wide bench with a pegboard backing and both upper and lower shelves. A complete list of fasteners and cut lengths is provided. For use as a loading bench with mounted presses, you can double-up the bench-top for extra ridigity. Without much difficulty, the plans can be adapted to build a wider bench if you prefer.

The same downloadable document also contains plans for an 80″-high 6-shelf unit, a 72″-high heavy-duty shelving unit (with 4 shelves), and a 48″-wide heavy-duty table.

Permalink Reloading No Comments »
November 26th, 2008

Free Reloading Bench Plans

Serious shooters spend lots of time in the reloading room. If you want to produce great ammo, start with a good, solid bench with a very rigid working surface and plenty of storage space. Here we present three sets of FREE workbench plans. Any one of these bench designs can be a good winter do-it-yourself project for those with basic word-working skills.

Easy-to-Build Basic Bench
Simpson, maker of Strong-Tie fasteners, offers FREE Workbench Plans for a sturdy, 48″-wide bench with a pegboard backing and both upper and lower shelves. A complete list of fasteners and cut lengths is provided. For use as a loading bench with mounted presses, double-up the bench-top for extra ridigity. Without much difficulty, the plans can be adapted to build a wider bench if you prefer. The same downloadable document also contains plans for an 80″-high 6-shelf unit, a 72″-high heavy-duty shelving unit (with 4 shelves), and a 48″-wide heavy-duty table.

FREE Strongtie Bench Plans (.pdf file).

Corner Bench with Swinging Doors
The next design is rather unique — a corner bench with swing-out cabinets. This reloading bench is based on plans by M. L. McPherson as published in the October 1993 American Rifleman. The compact footprint that makes good use of corner space that is usually poorly utilized. This set of plans is provided by from Ray-Vin.com, which sells scope stands, shooting carts, sight accessories, and AR15 parts.

Reloading bench plans

FREE Corner Bench Plans (330kb .pdf file)

Classic NRMA Bench with Cabinets
The last bench design is a large, versatile bench with a full set of enclosed overhead cabinets. A National Reloding Manufacturers Association (NRMA) design, this bench requires many hours to build, but it will house all your reloading gear and provide a very stable platform for your presses.This bench was designed to be as versatile as possible to meet the needs of most reloaders. However, the bench design can easily be customized. For instance, it can be made larger or smaller to meet space requirements or quantities of equipment and components. As it is currently designed, the work area is about waist-high for a 6’2″ person. This can be adjusted to fit your height simply by making the legs longer or shorter.

NRMA reloading bench

FREE NRMA Reloading Bench Plans (2.42 megabyte .pdf file).

Permalink - Articles 8 Comments »