|
|
May 22nd, 2014
 Forum member Jacob spotted this simple, but effective set of scope ring inserts on the Brownells Website. With these inserts, you can use a scope with 1″-diameter main tube in 30mm rings. Non-marring, matte black Delrin sleeves surround the scope tube so it can fit larger-diameter rings. Each sleeve comes in two parts for easy installation around your scope tube. This way you can use the same 30mm rings for all your scopes.
Ring Reducers are sold as front/rear kits. Cost is just $19.99 for the 1″ to 30mm converters, item 084-000-091. There are also sets that reduce 30mm rings to 25mm, and 1″ rings to 3/4″ or 7/8″.
Note: These Brownells units simply function as plastic bushings. Unlike Burris Signature Ring inserts, they do not allow you to “pre-load” windage or elevation. If your rings are misaligned, the Brownells Ring Reducers won’t correct that problem.
May 14th, 2014
What do you call a shooting match that draws 125 competitors (ages 7 to 70), with 30 first-ever shooters, 36 ladies, and 17 juniors? We call that a rip-roaring success. Credit the Old Fort Gun Club in Arkansas for hosting such a successful event on April 26-27, 2014. The impressive turn-out shows the appeal of the NSSF Rimfire Challenge format, a fun match with FREE ammo provided by sponsors.
Video Shows Rimfire Challenge Fun Match.
The match attracted target shooters from 10 states. More than 30 participants said it was their first time competing in a shooting event. Thirty-six of the 125 competitors were female, 17 were juniors, and 17 were seniors. This is the kind of match that is fun for all age levels.
The NSSF Rimfire Challenge is a program of the National Shooting Sports Foundation, the trade association for the firearms, ammunition, hunting and shooting sports industry. NSSF Rimfire Challenge was developed to introduce newcomers to target shooting by providing individuals and families with a safe, fun and exciting first-time experience using .22-caliber handguns and rifles and steel targets.
Awards were given to the top three finishers in Open and Limited Divisions, along with the top finisher in the Juniors, Seniors, Ladies, and Cowboy/Cowgirl categories. All registered shooters were also eligible to win sponsor-provided prizes.
Support for the match was provided by Volquartsen Custom, Brownells, Ruger, Hogue, and other companies. “I’d like to thank NSSF for supporting these matches,” said Bill Striplin, match director and Old Fort Gun Club president. “In my opinion, the NSSF Rimfire Challenge is the most fun shooting game in the world.” Learn more about the NSSF Rimfire Challenge at www.NSSF.org/rimfire. That web site also has a schedule of future Rimfire Challenge matches around the country.
March 24th, 2014
Brownells’ 8th Annual Gunsmith Career Fair will be held at the Des Moines Marriot Downtown in Des Moines, Iowa, April 1-2, 2014. The Brownells Gunsmith Conference & Career Fair is expected to draw hundreds of attendees along with representatives from three dozen potential employers. As in past years, the Career Fair will include gunsmithing seminars along with opportunities for individuals to interview for jobs with arms-makers and government agencies.
 Gunsmith CareerFair.com.
In addition to industry and government representatives, many trade schools and colleges offering gunsmithing programs will be exhibiting at the 2014 Gunsmith fair. Past exhibitors have included:
Story tip by EdLongrange. Reader Submissions are welcome.
December 1st, 2013
Did you miss Black Friday? Well don’t fret. Sinclair International is still offering 10% off all orders of $149.00 or more. This hefty discount is valid through 11:59 pm on Monday, December 2, 2013. There are many good deals to be had. Remington 700 Short Action receivers are on sale for $389.99. Forum member JohnHenry notes that Sinclair has benchrest LV 1:14″-twist 6mm Bartlein barrels on sale for $299.99, and you’ll get an additional 10% off with Discount Code EBJ. Use Code EBJ at checkout to save today and on Cyber-Monday (12/2/2013).
November 29th, 2013
Our readers have been getting some great deals over at Brownells.com, with the big Black Friday Sale happening right now. Brownells’s Black Friday specials are good through 11:59 pm CST on December 2, 2013. Here is a Discount Code that can save you 10% on all Brownells orders over $149.00 (Use Code EBH at checkout). Happy shopping boys and girls….
November 27th, 2013
 Polish off your credit cards boys and girls, the big Brownells Black Friday Sale begins at 12:01 am on Thanksgiving Day, November 28, 2013. You’ll find great bargains on gun parts and accessories, as well as reloading gear and gunsmithing tools. (Brownells is the world’s largest supplier of gun accessories and gunsmithing tools) The special sale prices start on November 28th and continue through the weekend — you have until 11:59 pm CST on December 2, 2013 to grab these Brownells bargains.
Here Are Some Currently-Featured Sale Items at Brownells.
Prices May Go Even Lower When the Sale Commences Tomorrow:
October 19th, 2013
 Rem 700 Action Sale
Need an action for your next varmint, hunting, or tactical rifle project? How about a brand new, short action Remington 700 receiver for $389.99? Sound good? Then visit Brownells.com to take advantage of this special offer. These .308-size-bolt, blued-finish Rem 700 actions have been marked down from $449.99 to $389.99 — a $60.00 savings. (Brownells also has Rem 700 Long Actions priced at $499.99). You should act soon, as supplies are limited. FFL is required for purchase.
Factory-Original, Current Production Actions with X-Mark Pro Triggers
These receivers are from a current factory production run and meet the latest design specifications and quality control standards at the Remington factory. The $389.99 versions have a .308-Win diameter bolt face. Each is precision-machined from either carbon steel or stainless steel barstock for uniform strength, drilled and tapped for scope bases, and ready to accept your choice of barrel and bottom metal. Remington’s bolt assembly features two, up-front bolt lugs for tight lockup and reliable pressure retention, plus 2-panel checkering on the bolt handle. A rivetless, circlip-type extractor and spring-loaded plunger ejector provide positive case extraction. Each action is equipped with Remington’s new X-Mark Pro trigger for improved trigger pull and easy adjustment. The easy-to-reach, two-position thumb safety engages quietly, and allows unloading while in the “safe” position.
EDITOR’s NOTE: The following commentary by Brownells explains why the availability of new production Rem 700 actions is unpredictable, and why Rem 700 actions are a good choice for a rifle build.
Remington 700 Actions — Availability
It’s been many years since Brownells has been able to offer Remington 700 actions in its catalog. The problem has been unsteady supply: Remington Arms Co. will release actions to the commercial market only when it is sure it has enough supply to satisfy its own production needs for complete guns. Now, however, through a new arrangement with Remington, we are able to offer both Long and Short 700 actions (but supplies are limited).
Why The Rem 700 Action?
It’s simple. For 50 years, the Remington 700 has been the flagship of commercial rifle actions, providing proven reliability, fine accuracy, plus the largest selection of aftermarket bolt action parts in the industry. The Remington 700 action has proven itself for hunters and target shooters alike. The Rem 700 action still ranks as the number one choice of custom gun makers. Consequently, you will find a large selection of Rem-700 inletted stocks, along with aftermarket triggers, bottom metal, scope rails, and other accessories.
When They’re Gone…
There is, indeed, a limited number of commercial suppliers for these actions, and we are proud to be one of them. Although steadier now, the supply is still not certain enough that we’re ready to catalog them in our Big Book. We can only offer what we have in stock — and simply cannot guarantee permanent availability in the future. If they sell out, we all may be back to scrounging the gun shows and searching the Internet for a lucky deal on something used, or pirating the action from a brand new gun.
October 12th, 2013
Harris swivel-model bipods allow you to adjust the cant of your rifle. This is useful if you are shooting on side-sloping ground. But what if you want to traverse from side to side, say to switch from one critter to another during a prairie dog safari? Well normally you would have to pick up the entire rifle and reposition it to the left or to the right. Now you have an option. The Upriser Arms Bipod Swivel Mount allows you to traverse your rifle left to right, without moving the bipod legs.
Video Shows How Traversing Bipod Mount Works, with Locking Plunger Knob:
 This rugged, machined-aluminum bipod mount lets you swing your aim point from side to side without having to reposition the bipod. The rubber-padded Upriser Arms Bipod Mount accepts any bipod that attaches to a forward sling swivel stud. There is also a version that fits on tactical rails.
It is easy to engage or disengage traversing capability via the plunger knob on the front of the unit. When you pull down on the plunger (and twist to lock in “down” position), the rifle can swing smoothly on an internal, precision-bearing pivot. To go back to non-traverse mode, simply center the fore-arm and then twist and release the knob so the plunger pops up, securing the bipod in the “dead-center” position. Note: This unit adds approximately 1¼” to bipod height.
This $69.99 bipod mount comes with a 100% satisfaction guarantee when purchased through Brownells or Sinclair Int’l. User feedback has been positive. One purchaser wrote: “I take this [traversing bipod mount] on all my hunts and it has impressed me immensely. The part is built strong and has improved my shooting. It is really smooth, easy to use, and helps me stay on scope when my game is on the move instead of having a shaky swivel or having to move the whole bipod. I have recommended this product to all of my friends[.] — Adam, Missoula, MT
September 20th, 2013
 Using ultrasound in a liquid solution, you can clean your cartridge brass inside and out. Ultrasonic cleaning is nothing new — we described this process years ago. But with the increased cost of brass, more and more shooters are turning to this effective process to get their cases clean.
Now RCBS offers an affordable Ultrasonic Cleaning Machine with some great features. The new RCBS machine boasts a 3-liter capacty, user-friendly keypad, and a built-in 100-watt heater with four settings. The unit also includes a handy drain valve and drain tube.
Ultrasonic cleaning works fast, without the long processing time (and dust) of conventional tumbling. Cleaning cases with ultrasonic machines has become very popular, as the ultrasonic process reliably removes caked-on carbon and grime from brass cases inside and out, even in the primer pocket. We do recommend that, after ultrasonic cleaning, you consider using a dry neck lube to restore lubricity to your necks for the first and second firings.
The new RCBS ultrasonic cleaner features a large 3-liter capacity, 60 watt transducer, and 100 watt ceramic heater. ‘Street Price’ for the RCBS ultrasonic machine is under $150.00, and this unit qualifies for RCBS Rebates ($10 off $50 purchase or $50 off $300.00 purchase). RCBS also sells 32 oz. bottles of cleaning concentrate that will make up to 10 gallons of Ultrasonic Solution.
August 14th, 2013
The “Big Book” is back. Brownells’ Master Catalog #66, the largest ever, is now available. The 696-page Catalog is filled with a vast number of products for gunsmiths, competitors, hunters and gun enthusiasts. The latest Catalog #66 boasts more than 2,000 new items, including 10 pages of reloading supplies. The AR-15/M16, Riflescope and Pistol sections have also grown significantly.
Master Catalog #66 is presented in Brownells’ signature horizontal format, with color-coded edges and mini-indices to help readers find the 35 various product categories. To receive a catalog, simply visit the catalog section of Brownells’ website. Customers may also call 800-741-0015 to request a catalog. The Master Catalog #66 costs $5.00.
If you prefer a FREE PDF Version of Master Catalog #66, then CLICK HERE for PDF Catalog.
|
