Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









March 20th, 2026

Kick-Ass Tactical Trainer — Mag-Fed Rem 40X in Manners Stock

Remington 40X rimfire .22LR rifle suppressor Manners stock Bartlein Bushnell EFR front rail Defiance Mack Brothers Suppressor
Brian, a gunsmith at GA Precision, built this rimfire rig with GAP colleague Anthony Soukup.

On his Facebook page, Tactical competitor Bryan Sikes posted a photo of a rimfire rig we really liked. Brian works at GA Precision. He and fellow GAP gunsmith Anthony Soukup built this rifle. With a modified Rem 40X action, Manners stock, Bartlein barrel, and Mack Brothers suppressor, this rig has top-quality components stem to stern. And Bryan tells us this rifle performs as good as it looks: “This is the baddest little .22 LR trainer ever. I’m stoked about it. With the barrel length and can, it’s the exact length of my regular comp rigs.” With length, balance, and ergonomics near identical to Bryan’s centerfire competition rifles, this 40X is a superb training tool.

• Modified Remington 40X Action
• Calvin Elite Trigger
• Bartlein #5 22″ Barrel
• Mack Brothers Vapor Suppressor

• Bedded Manners T4-A Stock
• Defiance Embedded Front Rail (EFR)
• Harris Swivel Bipod with Handle
• Bushnell DMR2 Scope w/ G3 Reticle

Many readers wanted to know about the bottom metal and the detachable box magazine. Bryan Sike reveals: “The magazine setup is designed specifically to replicate my actual competition rifles. The bottom metal is for use with AI magazines and uses a standard M5 type inlet just like any centerfire completion rifle. In this case with the .22LR, Mike Bush designed a high reliability rimfire magazine using the same outside dimensions as an AI magazine. This rifle was built no different from any other. The action was modified and trued, barreled, fully bedded, etc. using ALL components common to centerfire match rifles.” The Rem 40X action was modified by Modacam Custom Rifles to work as a repeater with box mags.

Remington 40X rimfire .22LR rifle suppressor Manners stock Bartlein Bushnell EFR front rail Defiance Mack Brothers Suppressor

Bryan adds that a new rimfire action is in the works: “My preference is modified Remington 40X actions and the soon-to-be available, V-22 action from Mike Bush. Both of which are TRUE repeaters and don’t feed from a Savage magazine. This rifle feels nothing like a .22 LR and that was the whole point.”

Remington 40X rimfire .22LR rifle suppressor Manners stock Bartlein Bushnell EFR front rail Defiance Mack Brothers Suppressor

Why You Need a .22 LR Tactical Cross-Trainer
Many guys who shoot long-range tactical matches practice with .22 LR rifles of similar configuration. Rimfire ammo is way more affordable than centerfire, you do not need a big range facility, and shooting rimfire saves wear and tear on your centerfire rifle. Further, for learning how to read the wind, there really is no better training tool than a .22 LR, even as close as 50 yards.

Our Friend “DesertFrog”, who shoots tactical matches in Southern California, explains: “I used to shoot an average of 200 rounds of .308 Match ammo a month for training (50 per weekend). These days I shoot maybe an average of 50 rounds of .308 Win per month and probably around 600 rounds of .22 LR. Using mainly the .22 LR for practice did NOT hurt my standings in actual competitions. I shot my .308 just as well in matches, but saved the cost of hundreds of rounds of .308. If I didn’t reload and was still buying boxes of Federal Gold Medal Match .308 Win [at $1.90/round], this would be a savings of [$350 per month on the centerfire ammo.]” Money saved is money earned.

Targets for Rimfire Cross-Training

SPECIAL BONUS–Rimfire Tactical Precision Targets

These FREE targets by DesertFrog are offered in Adobe Acrobat format for easy printing.
CLICK HERE to download all six targets as a .ZIP archive.

Permalink Competition, Gear Review, Gunsmithing, Tactical 2 Comments »
March 20th, 2026

Forster Products Offers Primer Pocket Swager for Co-Ax Press

new forster co-ax press swage primer pocket swaging tool small large

A few months ago, Forster Products released a limited run of a new prototype Primer Pocket Swaging Tool for the Co-Ax press. This is a metal shaft that attaches to the base of the press. After receiving very positive feedback from initial testers, Forster has determined to offer the product again, priced at $30.00 for a set of two (2) swage tools (for both small and large primer pockets). CLICK HERE to order.

new forster co-ax press swage primer pocket swaging tool small large

Intial Testing Feedback on Forster’s Swaging Tool:
Several reloaders told us the tool required less force than expected and preferred using it over other swaging methods. Setup was straightforward, and overall performance removing military crimps from .223/5.56 brass was consistent and effective.

One customer ran over 270 cases through the tool across multiple headstamps and reported solid results removing 3- and 4-point crimps. Others noted that once properly adjusted, it did a clean job swaging primer pockets and allowed primers to seat properly afterward.

A few important observations also came through:

• Brass varies — even cases with the same headstamp can behave differently.
• Heavily crimped brass may require more care during operation.
• As with any swaging operation, excessive force can damage rims if the operator overpowers the case.

In other words — the tool works well, but like most case prep operations, proper setup and feel matter. Overall, Forster reports that user reports have been very positive given the good performance on real benches. Because of that response, Forster has made another limited quantity available.

new forster co-ax press swage primer pocket swaging tool small large

If you process crimped military brass on your Co-Ax press and want to streamline primer pocket prep without adding another expensive, standalone tool to your bench, the new swaging tool for the Co-Ax is now available for $30.00. This include both small and large swaging units. CLICK HERE to order.

Permalink Gear Review, Reloading No Comments »
March 20th, 2026

March Madness — 10 Reasons Shooting is Harder than Basketball

hap rocketto march madness basketball Top 10 hoops tournament

“March Madness”, the annual NCAA college basketball tournament, is already underway — the 2026 Men’s March Madness tournament runs from March 17 to April 6, 2026. Here’s a clever guest article by Hap Rocketto that examines the game of B-Ball and explains why shooting targets is actually more difficult than shooting hoops. This story originally appeared in the Hap’s Corner section of Pronematch.com. Hap is a rare talent in the gun world — a serious shooter who also has unique insights, and a great sense of humor. We recommend you visit Pronematch.com to enjoy the many other interesting Hap’s Corner postings.


by Hap Rocketto
I know shooting is tougher than basketball…. Come on, just how difficult is it for five tall guys to help each other toss a big ball into a basket? Granted basketball is more physically demanding than shooting a rifle, but I think that blasting a quarter-size group into the center of the target at 100 yards all by yourself is a far more difficult task than working as a team to dunk a ball.

Therefore, in the style of former Late Night talk show host David Letterman, I have constructed a list of ten reasons why rifle shooting is tougher than basketball.

TOP TEN REASONS Why Rifle Shooting is Tougher Than Basketball

10. When you get tired in basketball the coach just calls time out and replaces you with someone fresh. Not so in shooting.

9. When’s the last time a basketball player had to make a shot with the sun in his eyes?

8. How often does a basketball player have a perfectly good shot blown out by the wind?

7. If a basketball player places a shot a little higher than intended, no problem. The backboard causes the ball to bounce into the basket. No such luck in shooting.

6. Rifle matches commonly run all day. When was the last time you saw a basketball game run more than an hour or so?

5. If you’re not making your shots in basketball, you can just pass the ball to someone who is hot. No such convenience in shooting.

4. Rifle bullets travel faster than the speed of sound (roughly 300 meters per second). Basketballs top out at around 15 meters per second.

3. A basketball player can shoot from anywhere on the court that is convenient and comfortable. All riflemen shoot from the same distance.

2. A basketball player may shoot as often as the opportunity arises and is not limited to the number of shots taken. A rifle match requires that each rifleman shoot the same number of record shots. If they shoot more than allowed, then a penalty follows.

1. And the Number One reason why shooting is tougher than basketball is that, if you miss a shot in basketball you, or a team mate, can just jump up, grab the ball, and try again. Try that in shooting.

The only real similarity between the two sports is that a competitor attempts to score points by shooting. In rifle it is through a hard-hold and easy squeeze in prone, sitting, kneeling and standing; while in basketball it is via hook shots, jump shots, lay-ups, or the dramatic, ever crowd-pleasing, slam dunk.

About the Author: Hap Rocketto is a Distinguished Rifleman with service and smallbore rifle, member of The Presidents Hundred, and the National Guard Chief’s 50. He is a National Smallbore Record holder, a member of the 1600 Club and the Connecticut Shooters’ Hall Of Fame. A historian of the shooting sports, his work appears in Shooting Sports USA, the late Precision Shooting Magazine, The Outdoor Message, the American Rifleman, the CMP website, and Pronematch.com.

Credit John Puol for finding this article and communicating with Hap Rocketto.

Permalink - Articles, Competition No Comments »