|
|
May 6th, 2010
 Berger Bullets has just released its new .338-caliber “hybrid” bullet, Berger’s first-ever projectile larger than .30 caliber. The new bullet has a very high ballistic coefficient (BC): 0.891 under the G1 model, and 0.455 under the newer G7 standard for boat-tail bullets. That high BC should translate into exceptional long-range performance. According to Berger, the BC of the new Berger .338 bullet BC is roughly 14% better than the BCs of other .338-caliber 300gr offerings from Sierra and Lapua. This claim is supported by testing done on all three bullets and published in a detailed Bullet Comparison Report (PDF). The new .338 Hybrid bullets will be sold in 50-count and 250-count boxes. To order, call Berger’s Tech-Line, (714) 447-5458.
The key design feature of the new .338 bullet is its hybrid ogive, i.e. a shape that combines both tangent and secant geometry. A tangent ogive meets the bearing surface very smoothly, whereas a secant ogive has an abrupt juncture with the bearing surface. The figure below shows the geometric differences between a tangent and a secant ogive, as well as the strengths and weaknesses of each.
Practical Considerations — Load Length and Twist Rate
The superior ballistic performance of the 300gr Hybrid .338 is primarily due to the very long ogive and boat tail. However, that super-long bullet length can create some issues. Berger’s new .338 Hybrid bullets are so long that loaded rounds may not fit some magazines comfortably, unless you deep-seat the bullets, which cuts down on usable case capacity. If your loaded rounds with the new .338s are too long for your magazine, single-feeding is recommended. In addition, and this is IMPORTANT, to get optimal performance with the new bullets, you may want to extend the throat in your chamber. This can be done relatively easily by a competent gunsmith using a throating reamer. We caution, however, once the throat is pushed out, you can’t go back to a shorter throat without setting back the entire barrel.
The new .338 Hybrid bullets should stabilize well with a 1:10″ twist at the velocities achievable with popular .338 magnum cartridges. However, according to Bryan Litz, Berger’s Ballistician, at extreme long ranges (beyond one mile), as the .388 bullet goes trans-sonic, it may need more spin. As the bullet slows down into the trans-sonic range, extra stability is required — something you get by spinning the bullet faster. So, for those guys planning to shoot at one mile or beyond, Berger recommends a faster twist-rate. The faster twist provides more spin-stabilization at very long ranges. But for 1000-yard shooting, you don’t need to be concerned about trans-sonic stability. As Bryan explains: “So as long as you keep your shots under 1 mile, the 1:10″ twist is plenty adequate.”
Berger Bullets Video Update (Eric Stecker talks about the new .338 Hybrid and other matters.)
Share the post "Berger Bullets Releases New .338 Hybrid (Dual-Ogive) Bullet"
April 28th, 2010
 Hey guys, here’s your chance to buy Berger Bullets at super-low prices. Berger has arranged an exclusive “Bullet Sell-Off” promotion for AccurateShooter.com readers. These bullets are not blems or damaged. They are mostly first-quality overruns. After yesterday’s sale, what’s left are primarily 22 caliber. Some are moly-coated but most are not. The prices are insanely low on these sell-off bullets. You can save $10 per 100 (or more) on some types.
Eric Stecker, Berger’s Master Bulletsmith, explains: “Over time we accumulate bullets that are either discontinued, overruns or were part of a test that is completed. These bullets are Match Grade and every bit the same as any Berger. Circumstances specific to each lot available is compelling us to release these bullets for very low prices. Below I’ve listed the quantity, description, lot, price and a brief explanation on why they are available for such a low price.”
Berger will sell these bullets for the next few days. To purchase the Special Sell-Off bullets, call Berger’s main line at (714) 447-5456 to place the order. Doing this will help keep things sorted out as the calls come in — first call, first served. UPDATE: The 17 Cal just sold out.
Share the post "Berger Bullets Special Sell-OFF — Save Big Buck$"
April 23rd, 2010
MidwayUSA was able to take advantage of a Special Buy on factory-blemished bullets. These bullets have slight cosmetic defects that should not alter performance. These blem bullets will be sold on a first-come, first-served basis, with sale prices in effect through April 30, 2010. MidwayUSA shows a 6.5mm (.264) 129gr poly-tip (probably a Hornady) on sale, but it appears the 129s may have sold out already.
 There are still some great deals. The remaining inventory of blem bullets includes:
17 Cal (.177) Varmint Bullets, 20gr FMJ, Item 685063
Regularly $16.99, NOW $10.49 per 100
25 Cal (.257 ) 100gr Spitzer, Item 817547
Regularly $21.99, NOW $14.29 per 100
.270 Cal (.277) 110gr HPBT, Item 513312
Regularly $23.49, now $15.19 per 100
Share the post "MidwayUSA Blemished Bullets Sale — Big Savings"
April 16th, 2010
Berger Bullets has just released a video report from Eric Stecker, Berger’s “master bulletsmith”. In this video update, Eric explains why Berger’s popular 6mm, 25 cal, and 7mm bullets are in short supply. Eric reports that production delays were caused by mechanical problems with the jacket-making presses. The good news is that the jacket presses have now been fixed (this required a complete rebuild of the 7mm press), so production should be back on schedule very soon. You’ll find more current news and match reports on Berger’s new Facebook Page.
Berger also announced that, in order to better respond to customer inquiries, Berger has added a new representative to the customer service staff, Teresa Collins. You can contact Teresa by phone at 714-447-5456 or send email to: teresa.collins [at] bergerbullets.com.
Share the post "Berger Bullets Video Update — 6mm, 25 Cal, and 7mm Bullets"
April 14th, 2010
 Expect the price of bullets and cartridge brass to climb upwards. Though demand for loaded ammunition has slacked off somewhat in the USA, as the buying frenzy of 2008-2009 has abated, there is still strong demand for sporting ammo and reloading components. Shortages persist for some types of reloading components and military ammo demand remains strong. But the primary reason for higher brass and bullet prices is the rise in raw materials costs. In the past year, the price of copper has risen from about $2.00/lb to over $3.50/lb. Likewise, the cost of lead (used for bullet cores) has jumped from $0.60/lb to $1.05/lb.
Will this trend continue? Probably. As the world economy sputters into recovery, increased global demand for raw materials will probably continue to drive metal prices upwards — and that means reloading components will cost more. A 100-count box of 140gr bullets contains two pounds of metal. If raw material costs rise $2.00 or $3.00 per 100 bullets, eventually we will see higher bullet prices.
The Economist predicts rising metal prices through 2011: “Growing optimism about the world economy helps explain why prices are surging. News from developed economies has become sunnier. And metal-hungry China ([which] consumes a third of the world’s base metals) is expected to grow so fast that its metal demand could return to pre-crisis levels in a year or so. Supply and demand is not the only thing helping keep prices aloft. There is an ‘extraordinary market’ for copper that has departed from fundamentals, reckons Andrew Keen at HSBC. Growing copper inventories at metals-exchange warehouses (half a million tonnes or so by some estimates) have coincided with increasing prices. The same seems to be happening with aluminium, lead and nickel.”
Share the post "Rise In Metals Prices Could Impact Shooting Market"
April 1st, 2010
In recent years, environmental concerns over lead toxicity have inspired efforts to eliminate conventional lead-based ammunition. To protect endangered species from lead poisoning, California has banned hunting altogether on huge tracts of public land. In other areas which harbor protected species, hunters are forbidden to use lead-core or solid lead bullets. There is an ongoing FDA investigation into the health of venison taken with lead-core bullets. Responding to such concerns, in 2008, Barnes Bullets (now part of the Freedom Group), introduced its MPG™ (Multi-Purpose Green) lead-free bullets. These bullets are intended for hunting and for rifle training in locations where lead is restricted.
 Following Barnes’ lead, BIO-Bullets, a small company in Wanganui, New Zealand has invented a jacketless bullet that is not only lead-free, but is also 100% non-toxic, and bio-degradable. The new bullets have zero lead content and are made from “all-natural”, organic compounds. Unlike conventional bullets formed in a die, the new BIO-Bullets are pressure-molded from a proprietary composite, using sintered mineral compounds in a silica matrix. The mineral compounds, interestingly enough, not only bind the bio-degradable bullet together, but they provide nutritional benefits for any game that might ingest the projectiles. If an animal eats the bullet, it won’t get sick — it will actually get healthier.
That’s right — these edible BIO-Bullets are not only non-toxic, they are actually nutritious. “When we came up with a non-toxic component mix, we realized we could actually provide a blend of flavorful nutrients in the matrix.” Said Trevor MacDiarmid, BIO-Bullets’ chief bullet designer. “It may seem far-fetched but just look at the label on a typical multi-vitamin supplement. You’ll see iron, chromium, magnesium, potassium, and zinc, among other minerals. These are all elements that can be combined into a durable bullet form that is actually healthy when ingested by an animal.” MacDiarmid, who holds a Ph.D in chemical engineering, explains that the health benefits of the BIO-Bullet came as an unexpected bonus: “Our first goal was simply to create a shootable, lead-free bullet that was non-toxic. But when our silica matrix proved more than hard enough to survive the friction, heat, and pressure of a 3500 fps trip through a rifle bore, we realized we could add additional minerals into the mix that would have a salutary effect on wildlife health.”
 BIO-Bullet’s founder, Steven Williams, is a gregarious 45-year entrepreneur who earned his first millions promoting dietary supplements in his native New Zealand. Noting the growing interest in “eco-friendly” ammunition components, Williams expects a huge demand for his new BIO-Bullets. “Globally, the annual sales of hunting bullets exceed €500 million in value. And the military bullet market may be triple that number — as long as you Yanks keep fighting wars”, he joked. Williams believes his new company is in the right place at the right time: “Being based in eco-aware New Zealand gives us a strong marketing advantage in launching this new product.” Williams’ company has earned the coveted “100% Pure New Zealand” certification, signifying that Bio-Bullets are “all-natural” and organic.
A select group of New Zealand hunting guides has already been using prototype BIO-Bullets in the field. The new eco-friendly bullets have earned high praise from these tough-to-please outdoorsmen. “In terms of ballistics and knock-down power, I reckon the ‘greenies’ are as good as anything on the market”, reports veteran outfitter Bart Coutts. South Island guide and deer farmer Dennis Amon said, “I’ve used them for predator control, and, as a test I even fed them to some of our captive Red Deer. The Reds ate them up like they were candy. Ever since then we’ve been calling these BIO-bullets the ‘incredible edibles’.”
BIO-Bullets will initially be available in .224, 6mm, and .308 calibers starting at $40 (NZ) per box of 100. The varmint-grade, flat-based bullets will be finished with a day-glo green outer coating, while the longer, boat-tail match bullets will be fluorescent red. Said designer MacDiarmid: “Since our BIO-Bullets don’t use a conventional jacket, we can finish them in any color by adding non-toxic dyes to the silica matrix. It’s sort of like putting the colored shell on a jelly bean. I favored a more sedate color, but the boss wanted something bold and eye-catching. Steven’s the marketing guru, and he writes the checks, so we went with fluorescent colors. But any exterior color scheme is possible, even digital camo.”
BIO-Bullets is currently finalizing arrangements with North American distributors. The company expects its eco-friendly bullets to appear on American and Canadian store shelves in time for the traditional fall hunting season.
Share the post "New from New Zealand — Jacketless, Bio-Degradable Bullets"
March 24th, 2010
If you have a older version of QuickLOAD that won’t run on a Vista or Windows 7 computer, take heart, Neconos.com now has the updated version 3.6 of QuickLOAD. Version 3.6 is fully compatible with XP, Vista, and Windows 7, AND the latest update has an upgraded database with MORE powders, bullets, and cartridges. In addition, G7 Ballistic Coefficients are now supplied for many bullets in the database.
If you are currently running an older version of QuickLOAD on an XP machine, and you plan to upgrade to Windows 7, you should order the new QuickLOAD v. 3.6, with disk exchange. You will need to send in your CD so it can be “personalized” with your serial number. Ed Dillon of Neconos.com explains: “If you have 3.0, 3.1 or 3.2 and are planning on using a VISTA or Windows 7 machine you must install a new, compatible QuickLOAD disk. Send in your old CD and we will replace it with a Vista/Windows 7 compatible CD for $14.95 plus S & H.” (Note — this latest version 3.6 disk is also backwards compatible with Windows ME, 2000 and XP). Call Neconos at 800-451-3550, for instructions on how to send in your disk for the upgrade.
Data-only Upgrade Also offered
If you own a more recent version of QuickLOAD that already works with Vista, or if you plan to stick with XP, you can can order a data-only version 3.6 upgrade. That is the simplest way to get the enhanced databases, with new powders, bullets, and cartridges. If you have CD versions 3.0, 3.1, 3.2, 3.3, 3.4, or 3.5, you can purchase a new data update that adds new powders, cartridges, and bullets to your existing QuickLOAD program. For the data-only update, you do NOT need to send in your original installation CD, or uninstall the program. The data-only upgrade should simply update your QuickLOAD databases and you can keep running your program as usual.
Read our QuickLOAD Review to Learn More
The full QuickLOAD program costs $149.95, bundled with the QuickTarget ballistics program as a FREE extra. The latest version of QuickLOAD has comprehensive data for more than 1200 cartridges, 225 powders, and 2500 bullets. QuickLOAD is a remarkably powerful software program that will help you choose the most efficient powders for your cartridge. It can predict the effect (on pressure and velocity) of small changes in seating depth, barrel length, and even ambient temperature. Check out our detailed QuickLOAD Review to learn why this software is an invaluable tool for the serious reloader.
Share the post "Windows-7 Compatible QuickLOAD Updates from Neconos.com"
March 4th, 2010
Southwick Associates compiles statistics for the hunting/shooting industry and public wildlife agencies. Based on 2009 survey results, Southwick has ranked the most popular shooting/hunting brands and products. These rankings were based on HunterSurvey.com and TargetshootingSurvey.com online polls completed by nearly 45,000 hunters and shooters. The polls asked the hunters and shooters to list the outdoor products they purchased most often.
 There were some interesting results among rifle shooters. Remington is still the #1 rifle-maker, and Remington also leads the way in rifle ammunition. Hodgdon is the top reloading powder vendor with 36.5% of reported purchases. Top bullet-maker is Hornady with 30%, but remember this is for hunting AND target shooting. CCI makes the most popular rifle primers. We were somewhat surprised to see that the top scope brand for all firearms was Bushnell, which held a 17.3% share.
Southwick Associates’ HunterSurvey.com also measured buying activities over time. As you might expect, hunters spent the most money on gear in November. However the peak month for target shooters was June. We would have figured most of the spending would have taken place earlier in the spring — at least for rifle shooters who reload.
Rifle Shooting & Hunting
• Top rifle brand: Remington (16.5% of all purchases)
• Top muzzleloader brand: Thompson Center (29.5% of all purchases)
• Top scope for firearms: Bushnell (17.3% of all purchases)
• Top rifle ammunition brand: Remington (28.8% of all purchases)
• Top reloading bullet brand: Hornady (30.2% of all purchases)
• Top reloading powder brand: Hodgdon (36.5% of all purchases)
• Top reloading primer brand: CCI (36.0% of all purchases)
• Top shooting target brand: Shoot-N-C (38.9% of all purchases)
Shotguns
• Top shotgun brand: Remington (22% of all purchases)
• Top shotgun ammunition brand: Winchester (32.0% of all purchases)
• Top clay brand: White Flyer (34.3% of all purchases)
• Top balls, bullets, or shot brand: Hornady (26.2% of all purchases)
Handguns
• Top handgun brand: Sturm Ruger (16.6% of all purchases)
• Top handgun ammunition brand: Winchester (22.0% of all purchases)
• Top holster brand: Uncle Mike’s (21.4% of all purchases)
• Top blackpowder brand: Pyrodex (51.5% of all purchases)
Hunting Gear
• Top binocular brand: Bushnell (19.5% of all purchases)
• Top knife brand: Buck (16.7% of all purchases)
• Top scent or scent covering brand: Scent-A-Way (24.5% of all purchases)
• Top game call brand: Primos (34.8% of all purchases)
Share the post "Shooters Reveal Brand Preferences in National Surveys"
February 28th, 2010
 While in Southern California recently I couldn’t pass up the invitation to spend some time with my friend Michelle Gallagher, the Marketing Coordinator for Berger Bullets. After my obligatory visit to Disneyland, Michelle offered me a tour of the Berger Bullets factory. That is something even a Sierra guy knows not to pass up!
The machines now run 24 hours a day to keep up with market demands. To increase production, Berger recently started a third shift, allowing the machines to run at maximum capacity. We walked into the factory to the sound of a machine pressing out bullet jackets: “ca-chung, ca-chung, ca-chung.” It is so loud that hearing protection is worn by the operator. Copper is fed into the jacket-making machine from a large coil. Then a series of sequentially deeper, narrower punches create one complete bullet jacket for every revolution of the machine’s huge crankshaft. The operator monitors the whole cycle, selecting jackets at random to test for dimensional accuracy.
After the jackets are formed, lead is placed into the jackets. As with the copper jacket material, the lead is fed into a large machine from a coil. Lead cores are then cut to length and given an approximate shape, a process called swaging. This particular core-forming machine has been in use since before WWII! Michelle said “these machines still work great so there is no reason to switch to anything else”.
Next the copper jackets and lead cores are combined and shaped using a successive series of precision dies. The bullets are swaged (squished really) from the bottom up once the lead is inserted into the jacket via a tube feeder. This ensures there are no air bubbles between the lead core and copper jacket. I watched as one such machine was set up and calibrated. It was started then tested and adjusted a number of times before it was left to run automatically. Even then, handfuls of bullets are frequently tested for weight, concentricity, and dimensional accuracy. I was told that if any lot is found to be bad — for whatever reason — the entire lot is just thrown away! Sorry, but this means no boxes of seconds or “blems” at bargain prices from the Berger factory.
Some details of Berger’s operation surprised me. A number of tasks that I assumed would be automated are still done by hand, ensuring both accuracy and consistency. Bullets are weighed, packaged, and checked by hand. I overheard one employee say that they had a few thousand bullets to weight-sort before they could be packaged because they feared something may have been slightly off during production. That was a time-consuming task, but they did weight-sort bullet by bullet to make sure nothing had gone wrong.
 New Product Packaging
Berger is now offering “quantity packaging” for the most popular bullets in a number of different calibers. I was also surprised to see boxes in colors other than yellow on Berger’s shelves. Michelle explained to me that the yellow boxes are retained for match or target bullets. The thinner-jacketed hunting bullets now go in orange boxes while moly-coated bullets are packed in black boxes.
One last point worth noting is that if, like me, you (foolishly) wear a Sierra shirt to a tour of Berger Bullets, you will promptly be given a Berger shirt and hat to wear during the visit.
Michelle, thanks so much for the tour! — Kelly Bachand
Share the post "Berger Bullets Factory Tour — Kelly Bachand Reports"
February 7th, 2010
 In December, we published the rules controlling choice of caliber and bullet weight for Palma competition. (CLICK HERE to Read.) In the USA, some events are still limited to 156gr or lighter bullets for .308-caliber shooters. But where such restrictions don’t exist, many shooters are using heavy 175-190gr bullets in their .308s. Is the heavier bullet always better? What considerations favor the lighter 155gr-class bullets in Palma competition? Top Palma shooter Kelly Bachand addresses these questions in today’s commentary.
Factors That Favor the 155s
by Kelly Bachand
It is clear that 155gr bullets are adequate. In the Palma game, more matches have been won and more 450 scores have been shot with 155gr bullets than with any other weight projectile. With the NRA allowing heavier bullets in Palma matches, many shooters prefer to shoot the longer, heavier bullets when possible. With their higher BCs, the longer bullets would seem to offer a ballistic advantage. There may be an edge, but in my opinion, it comes at a high cost.
Shooting a heavier bullet adds complications. You’ll probably need a different powder and new load development will have to be done. New zeroes must be calculated and confirmed on the range. An expensive new barrel with a faster twist rate may be needed to stabilize the heavier bullets. And unless you’re lucky, there’s a chance that the new barrel is less accurate than your existing barrel. (If you’ve got a “hummer” barrel for the 155s, what are the odds of getting another one as good for the 190s?) For a shooter who only competes domestically and who has plenty of time and money, this does not pose much of a problem, as he can work up multiple loads and acquire multiple barrels, or even build up a second complete rifle. But shooting BOTH the 155s and the heavy bullets (which may require a new barrel) certainly adds to the cost of competing, and the time required to work up loads. One who also competes internationally has much more to worry about, since you’ll likely be switching between the heavy bullets for most domestic matches and the 155s for most international matches.
Consider the challenges you’ll encounter switching between a heavy-bullet domestic load and a 155gr international load. Will changing between two different loads (with very different recoil levels) alter your gun-handling and follow-through? Will having two loads (with different ballistics) create confusion when making wind calls? And if you DO shoot both 155s and 190s, should you have two different barrels, or should you stick to one barrel which is adequate for both bullet weights, but perhaps not optimal for either? The heavier bullets typically have a better BC which means they should be less bothered by the wind. At the same time the heavier bullets travel at a much slower velocity. Does this negate the ballistic advantage? You need to check the ballistic tables carefully, looking at BOTH BC and velocity.
As a person who prefers to keep things simple and stick with what works, it’s no surprise I continue to shoot 155gr bullets exclusively in Palma competitions. But I understand this is just one viewpoint. A Palma shooter reading this should survey competitors who are consistently putting themselves in the winner’s circle. Talk to top shooters and then make your own rational, informed decision about which bullets to use. Good luck and keep them in the center.
Share the post "Palma Projectiles: 155s vs. the Heavier 30-Caliber Bullets"
January 21st, 2010
 We had a long chat with Eric Stecker, Berger Bullet’s Master Bulletsmith. Eric had some interesting revelations. First he noted that Berger’s production in 2009 was up 50% compared to the previous year. Berger is now running 24-hour shifts to meet demand. And Berger isn’t resting on its laurels. A new .338 bullet is going into production, and Berger now has the means to produce .416s and even 50-caliber bullets. Berger also has multiple new prototype long-range bullets in development. Eric let me look at them and hold them but he requested that we NOT publish photos as the bullet profiles are somewhat radical. Eric revealed that a new series of short-range 6mm bullets in the 60-grain range are probably going to be released later this year. These borrow some design ideas from the successful Euber FB bullets, with refinements to improve ballistics.
We covered many other topics during our interview, including the status of the new Berger Reloading handbook, and the differences between the G1 vs. G7 Ballistics models. Click on the video link below to learn all the latest info from Berger.
Share the post "SHOT Show Report: Berger to Release .338 and new 6mms and Load Manual Nears Completion"
January 5th, 2010
 Cerberus Capital Managment, through its Freedom Group holding company, has acquired yet another well-known gun industry company: Barnes Bullets. On December 31, 2009, Freedom Group, Inc. entered into a purchase agreement to acquire certain assets of Barnes Bullets.
In recent years, Cerberus/Freedom Group has acquired Remington, Bushmaster, Marlin, H&R, DMPS and other smaller firearms-related companies. By acquiring Barnes, the Freedom Group gains entry into the ammunition component business at a time when brass, bullets, and powder remain in high demand. As the Freedom Group continues to build a vertically integrated firearms-related mega-corp, one wonders if Cerberus will look to acquire a powder-maker next. Freedom Group already sells Remington-brand factory-loaded ammunition.
Barnes Bullets, located in Mona, Utah, is the industry-leading supplier of copper bullets, including copper-tin composite core bullets. Barnes is a major player in the “lead-free” bullet market. This has become important as lead-core bullets have been banned in many hunting areas, and lead-free bullets are required in many indoor shooting facilities. Barnes Bullets will continue day-to-day operations at Utah facility under the guidance of company founder, Randy Brooks.
Ted Torbeck, CEO of the Freedom Group, Inc. stated: “With the acquisition of Barnes, the Freedom Group continues to demonstrate our commitment to the ammunition business. Barnes offers a premium line of high performance bullets for the hunting and shooting communities; and for law enforcement, military and commercial consumers. We are excited about their R&D capabilities and the breadth of the products they bring to our portfolio.”
Freedom Group is now one of the world’s largest producers of guns and ammo. Freedom Group brands include Remington, Bushmaster, DPMS/Panther Arms, Marlin, H&R, NEF, LC Smith, Parker, EOTAC, AAC, Dakota and INTC. The company distributes its products throughout the U.S. and in over 80 foreign countries. Learn more at www.freedom-group.com.
Share the post "Freedom Group (Cerberus) Acquires Barnes Bullets"
|
