Handy Tool for Quick, Easy Rifle Sight-In
Here’s a simple device that can help you zero your rifle in two or three shots. The new Click Stick Pro Tool is an L-Shaped ruler marked with scales corresponding to 1/8 MOA, 1/4 MOA, and 1/2 MOA clicks at 100 yards. To zero your rifle at 100 yards, take one shot, then position the tool so the bullet hole is at the elbow of the unit (for 1/8 MOA clicks) or at the slotted elbow (for 1/4 MOA clicks). Then square the tool so it aligns with the vertical and horizontal lines on the target. Finally, read the needed click movement off the tool’s scales. Get the horizontal correction from the horizontal scale and the vertical correction off the vertical scale. This device works great, and is inexpensive. The patent-pending Click Stick Pro Tool is sold in a kit for $19.95, bundled with 10 sight-in targets (red center with heavy black lines — see below).
Sighting-In at 25 Yards or 50 Yards
With a brand-new rifle and scope combination, you may want to sight-in at 50 or even 25 yards. You can still do this with the Click Stick Pro Tool. For a 50-yard sight-in follow the same procedure, but multiply the scales’ click value by two (2X). At 25 yards, multiply the scales’ click value by four (4X).
Tool-less, Simple Sight-In Procedure
While we like the Click Stick Pro Tool, you don’t really need the tool at all if you can hold your gun steady while you click the windage and elevation knobs. First, put the center of your crosshair on the target and take one shot. Then, before you touch the scope knobs reposition the rifle in your bags (or on your rest) so the center of the reticle is on the center of the target. Make sure the rifle is secure in this position (have a friend hold the rifle if necessary).
Now, using your elevation and windage controls (while looking through the scope), simply dial the center of the crosshair to the center of the bullet hole — without moving the rifle. You are moving the reticle on to the bullet hole. Take a second shot. The second bullet hole should now be in the center of the target. Repeat the process if needed with a third shot to confirm your zero. This procedure works at any distance. See our explanation of the Simple Zeroing Procedure.
