Forum member Erik Cortina has produced a series of YouTube videos about reloading hardware and precision hand-loading. Here we feature Erik’s video review of the Forster Co-Ax® reloading press. The red-framed Co-Ax is unique in both design and operation. It boasts dual guide rods and a central handle. You don’t screw in dies — you slide the die lock ring into a slot. This allows dies to float during operation.
Erik does a good job of demonstrating the Co-Ax’s unique features. At 1:00 he shows how to slide the dies into the press. It’s slick and easy. At the two-minute mark, Erik shows how sliding jaws clasp the case rim (rather than a conventional shell-holder). The jaws close as the ram is raised, then open as it is lowered. This makes it easy to place and remove your cases.
At the 5:20 mark, Erik shows how spent primers run straight down into a capture cup. This smart system helps keep your press and bench area clean of primer debris and residues.
While many Co-Ax users prime their cases by hand, the Co-Ax can prime cases very reliably. The priming station is on top of the press. Erik demonstrates the priming operation starting at 4:20.
Smart Accessories for the Co-Ax from Inline Fabrications
Forum member Kevin Thomas also owns a Co-Ax press, which he has hot-rodded with accessories from Inline Fabrication. Kevin tells us: “Check out the add-ons available from Inline Fabrication for the Co-Ax. I recently picked up a riser mount and a set of linkages for mine and love the results. The linkages are curved. When you replace the original straight links with these, the work area opens up substantially and the the press becomes much easier to feed.” CLICK HERE for Co-Ax Accessories.
Inline Fabrications Forster Co-Ax Accessories
Forster Co-Ax Curved Side Linkage (For Better Access)
Forum member Erik Cortina has produced a series of YouTube videos about reloading hardware and precision hand-loading. Here we feature Erik’s video review of the Forster Co-Ax® reloading press. The red-framed Co-Ax is unique in both design and operation. It boasts dual guide rods and a central handle. You don’t screw in dies — you slide the die lock ring into a slot. This allows dies to float during operation.
Erik does a good job of demonstrating the Co-Ax’s unique features. At 1:00 he shows how to slide the dies into the press. It’s slick and easy. At the two-minute mark, Erik shows how sliding jaws clasp the case rim (rather than a conventional shell-holder). The jaws close as the ram is raised, then open as it is lowered. This makes it easy to place and remove your cases.
At the 5:20 mark, Erik shows how spent primers run straight down into a capture cup. This smart system helps keep your press and bench area clean of primer debris and residues.
While many Co-Ax users prime their cases by hand, the Co-Ax can prime cases very reliably. The priming station is on top of the press. Erik demonstrates the priming operation starting at 4:20.
Smart Accessories for the Co-Ax from Inline Fabrications
Forum member Kevin Thomas also owns a Co-Ax press, which he has hot-rodded with accessories from Inline Fabrication. Kevin tells us: “Check out the add-ons available from Inline Fabrication for the Co-Ax. I recently picked up a riser mount and a set of linkages for mine and love the results. The linkages are curved. When you replace the original straight links with these, the work area opens up substantially and the the press becomes much easier to feed.” CLICK HERE for Co-Ax Accessories.
Inline Fabrications Forster Co-Ax Accessories
Forster Co-Ax Curved Side Linkage (For Better Access)
“The press is the heart of the handloading operation, also traditionally the most expensive single tool employed…” — Laurie Holland
British competitive shooter Laurie Holland has reviewed three popular, single-stage reloading presses for Target Shooter Magazine (targetshooter.co.uk). Laurie bolted up a Forster Co-Ax, RCBS Rock Chucker Supreme, and RCBS Summit to his reloading bench and put the three presses through their paces. These three machines are very different in design and operation. The venerable Rock Chucker is a classic heavy, cast-iron “O”- type press that offers lots of leverage for tough jobs. The smaller RCBS Summit press is an innovative “upside-down” design with a large center column and open front. It offers a small footprint and easy case access from the front. The Co-Ax is unique in many respects — dies slide in and out of the upper section which allows them to “float”. The cartridge case is held in the lower section by spring-loaded jaws rather than a conventional shell-holder.
If you are considering purchasing any one of these three presses, you should read Laurie’s article start to finish. He reviews the pros and cons of each press, after processing three different brands of brass on each machine. He discusses ergonomics, easy of use, press leverage, smoothness, priming function, and (most importantly), the ability to produce straight ammo with low run-out. The review includes interesting data on case-neck run-out (TIR) for RWS, Federal, and Norma 7x57mm brass.
Review Quick Highlights:
RCBS Rock Chucker Supreme
“My expectations of the antediluvian RCBS Rock Chucker Supreme’s performance weren’t over high to be honest as I mounted it in the place of the Summit. As soon as I sized the first of the stretched RWS cases though, I saw why this press has been such a long-running favorite. The workload was considerably reduced compared to the other two presses and doing 40-odd cases took no time at all with little sweat — it just eats hard-to-size brass.”
RCBS Summit Press
“Despite its massive build and long-stroke operating handle, [the Summit] took more sweat than I’d expected, even if it was somewhat less work than with the Co-Ax. Although the Summit is apparently massive, I noticed that the die platform would tilt fractionally under the heaviest strains[.] It is nevertheless a very pleasant press in use and bullet seating was a doddle — the few examples tried proving very concentric on checking them afterwards. The optional short handle would be valuable for this task.”
Forster Co-Ax
“[On the Forster Co-Ax], the operating handle is above the machine, located centrally here [with] twin steel links at the top end of the press dropping down to the moving parts. The Co-Ax incorporates a number of novel features, principally its automatic and multi-case compatible shell-holder assembly with spring-loaded sliding jaws, very neat spent primer arrangements that allow hardly any gritty residues to escape and foul the moving parts and, the snap-in/out die fitment that allows rapid changes and also sees the die ‘float’ in relation to the case giving very concentric results. I own this press and it meets my handloading needs very well.”
Share the post "Reloading Press Comparison: Rock Chucker vs. Co-Ax vs. Summit"
Forum member Erik Cortina has produced a series of YouTube videos about reloading hardware and precision hand-loading. Here we feature Erik’s video review of the Forster Co-Ax® reloading press. The red-framed Co-Ax is unique in both design and operation. It boasts dual guide rods and a central handle. You don’t screw in dies — you slide the die lock ring into a slot. This allows dies to float during operation.
Erik does a good job of demonstrating the Co-Ax’s unique features. At 1:00 he shows how to slide the dies into the press. It’s slick and easy. At the two-minute mark, Erik shows how sliding jaws clasp the case rim (rather than a conventional shell-holder). The jaws close as the ram is raised, then open as it is lowered. This makes it easy to place and remove your cases.
At the 5:20 mark, Erik shows how spent primers run straight down into a capture cup. This smart system helps keep your press and bench area clean of primer debris and residues.
While many Co-Ax users prime their cases by hand, the Co-Ax can prime cases very reliably. The priming station is on top of the press. Erik demonstrates the priming operation starting at 4:20.
Smart Accessories for the Co-Ax from Inline Fabrications
Forum member Kevin Thomas also owns a Co-Ax press, which he has hot-rodded with accessories from Inline Fabrications. Kevin tells us: “Check out the add-ons available from Inline Fabrications for the Co-Ax. I recently picked up a riser mount and a set of linkages for mine and love the results. The linkages are curved. When you replace the original straight links with these, the work area opens up substantially and the the press becomes much easier to feed.” CLICK HERE for Co-Ax Accessories.
Inline Fabrications Forster Co-Ax Accessories
Forster Co-Ax Curved Side Linkage (For Better Access)
SEB Rests, producers of the SEB NEO rest and innovative JoyPod bipod, have released an all-new, portable tripod-base Co-Axial rest, the SEB Mini. This is a very impressive bit of engineering by Sebastian Lambang. Weighing about 12 pounds, the SEB Mini is easy to transport yet stable and versatile in the field. A joystick lever-arm allows the shooter to move the front head (with sandbag) in any direction with a smooth continuous motion. The Mini delivers about 30 MOA vertical travel by 45 MOA horizontal travel with the same smooth, fluid feel as the NEO rest.
The Mini is now in full production and testers in the USA and UK have returned very positive test results. The Mini combines the smooth controls of a full-size Co-Axial front rest, yet is much easier to transport. Based on reports from testers Dan Bramley and Vince Bottomley, we predict the Mini will become extremely popular with F-Open competitors as well as all shooters currently using pedestal-style front rests for recreational shooting or load testing. Price for the complete unit (with front bag) is $675.00 shipped in the lower 48 states.
Inventor Seb Lambang told us his design goals in creating the Mini, which was named after “Mini” his pet Chihuahua: “The Mini rest is designed to be simple, compact, and light. It has has equal smoothness and MOA travel as the larger NEO rest.”
The new SEB Mini is a joystick (coaxial) rest with a height-adjustable single center column fitted on a base with three foldable legs. The top can be rotated 360 degrees and locked securely by the two adjustable locking levers. The lowest setting is about 6.25″, the highest is just over 10″. The SEB Mini can be used for F-Class shooting, bench rest shooting, varmint shooting, or load development. The joystick handle is compatible with the SEB NEOs and MAX co-axial rests. The Mini ships complete with a one-piece front sandbag in the buyer’s choice of width.
Key Features:
12-lb carry weight
Large Footprint, yet very portable
Legs adjust with individual thumbwheels
Mariner Wheel offers 40mm of Vertical Adjustment
Measures 5″ x 7″ x 16.25″ when folded
Lowest height approx 6.25″, highest 10″ or more
Head can be rotated independent of base assembly (to assist alignment)
Head unit can be purchased separately and fitted to different tripod base.
SEB Mini REVIEW by Dan Bramley:
Sebastian Lambang, the creator of the ever-popular SEB NEO and SEB MAX co-axial front rest, was kind enough to send me a SEB Mini for review. The point of this review is to give a shooter’s perspective. I will just say that the adjustments and movements are plenty sufficient to shoot in F-Class in High Power and rimfire.
Positives: The SEB Mini has all of the fine craftsmanship of the NEO. The fit and finish is excellent. This thing is SOLID! When the screws are all locked down it does not budge. The engineering is excellent and well thought-out. It comes in at 12.0 lbs with sand in bag and ready to shoot. To me this weight appears to be optimal, light enough to travel with but heavy enough to be stable.
Shootability: For me shooting off the SEB Mini was no different than shooting off the SEB NEO. The fluid motion of the coaxial top and stability were consistant with the NEO. Set-up was quick and the ability to set it down in reasonably close alignment and release the clamps on the Acme screw to allow perfect rest alignment was a nice feature. Course adjustment was quick with the large mariner wheel and the joystick has the same size collet as the NEO for those who may have made custom joysticks.
I shot my rimfire off of it at first, on concrete, and it didn’t move at all. No surprise there. So I figured I would shoot my biggest rifle off of it in an attempt to punish this little “Mini”.
Conclusion: This thing is just awesome! It folds up quite compact and would likely fit in a bag, instead of a pelican case, for travel. I have often thought of shooting my open rifle off of a JoyPod when traveling by air but that requires a rail etc. for mounting. I would not hesitate to shoot off this Mini in competition.
Vince Bottomley Tests the New Seb Mini
Our friend Vince Bottomley acquired a Seb Mini and had a chance to test it out in competition at the Diggle Range in the UK. Vince was very impressed with the Mini, which he says is very solid and smooth running, yet easy to set up. Vince used his new Mini to win a match, proving the unit is “competition-ready”: “When you do a range test like this, it’s always great if you can post a decent result and I’m pleased to be able to report that I won Open Class….”
Vince liked the smooth operation and broad windage/elevation adjustment range offered by the Mini:
“The joystick offers plenty of movement at 600 yards so staying on target throughout the shoot was no problem and, more importantly, I could swing onto my competitors’ targets as a final wind-check. Each of the three legs has its own ‘angle’ adjustment — enabling you to obtain a steady, level set-up on the most uneven of firing-points. The center pedestal can be raised and lowered using a mariner wheel and of course, there is the familiar joystick adjustment.”
Vince said it was easy to level the Mini and align the head with his rear bag: “Drop it on the point, then level the bubble using the leg-adjuster thumb-screws (photo right). Because the screws are at the pivot point they move the legs very quickly — as opposed to screwing the feet to level a NEO. Wind up the mariner wheel to get on target, nip up the locking levers and the rest is perfectly aligned, thanks to the swiveling head.”
Vince also liked the fact that the Mini is significantly lighter than a SEB NEO rest, but still stable because it has a wide footprint. See the comparison photo below.
Vince tells us that the Mini is truly easy to transport: “I’ve fixed a strap to my Mini so, by slinging it over my shoulder, I can carry rifle, mat and back-bag with ease — so that’s a big ‘plus’ right off.”
Conclusion: “The SEB Mini lived up to expectations and ticked all the boxes –lighter to carry, easy to set up, plenty of adjustment, very stable. Thank you Seb… You have a winner here!” — Vince Bottomley
Product Information from SEB Rests:
The complete SEB Mini includes Head unit, foldable legs, fore-end stop, aluminum bag bracket (with bubble level), joystick, leveling screws, and front bag. The base features three foldable legs, each of which can be adjusted/tilted for elevation via a thumb screw. We recommend setting the base/legs in the highest position initially, then lowering each leg via the thumb screws.
The Mini is offered in three (3) configurations. The complete Mini with base, foldable legs, and carry case is $800.00, including shipping to the lower 48 States. For considerable less there are two legless options. Option 1 is the Mini without the foldable legs. This could work for customers who may wish to fit the top to a solid base plate. Option 2 includes just the head unit with center post, mariner wheel and needle thrust bearing. Option 2 could suit customers who already have a Bald Eagle or Caldwell base with 1″ diameter center hole/post. However some machining may be required. Call Ernie Bishop at 307-257-7431 for current option prices and availability.
Net weight approx. 5.5 kilograms (12 lbs)
Top can be rotated 360° and locked securely in any position
Measures 5″ x 7″ x 16.25″ when folded
Joystick is compatible with SEB NEO, MAX and JoyPod
Lowest height approx 6.25″, highest 10″ or more
Foldable legs can be individually adjusted up/down with thumb screws
Extra wide footprint, leveling screws are about 17 inches apart
Ambidextrous, and can be used either “Up for Up” or “Up for Down”
Made from 6061 and 7075 aircraft grade aluminum
Head has removable fore-end stop
Standard fold-able base for traveling with tiltable legs
Comes with standard one-piece 3″-wide front bag 3″ wide (Optional bags*: 2-1/4″, wide sporter (for 1.5″-2″ stock), narrow sporter (for 1″-1.5″ stock)
For more information, visit SEBRests.com. The USA dealer is Ernie Bishop:
Do-It-Yourself Joystick Rest — Jeff’s Labor of Love
Quite a few competitors chamber their own barrels, and a few construct their own stocks. But Jeff Godfrey takes the prize for do-it-yourself audacity — he built his own co-axial front rest from scratch. Sam Hall provides this report:
“Jeff, one of Piedmont Gun Club’s regulars, is a talented fabricator. He made one of the smoothest joystick rests that I have ever laid my hands on. Jeff’s home-built coaxial rest rivals the Farley and Seb Max. It will also handle a wide fore-end Heavy Gun. Constructing virtually every part of this rest from scratch, Jeff made his own co-axial to save money. You have to admire his ingenuity and his dedication. Jeff says it took him over 100 hours to make. He said there would be no way he could make another one for profit!”
Share the post "IBS Gear Spotlight: Home-Built Co-Axial (Joystick) Front Rest"
Mark Trope, Webmaster of the Gun Owner Network website, has written a very thorough review of the SEB Coaxial front rest. Mark’s SEB Rest Review covers all the bases, showing how the rest works with a variety of rifle types, including both wide-forearm match rifles and narrow-forearm sporter rifles.
Mark provides dozens of good photos of the rest, including many close-ups showing the fine points of SEB’s impressive design. The review shows how to set-up and level the rest, and how to tune the “feel” of the joystick to suit your preferences. Some rest users prefer the joystick to move quite freely, while others prefer to dial in some resistance so there is no chance of movement when you remove your hand from the joystick.
After covering the features and performance of the SEB Rest, Trope turns his attention to the SEB “BigFoot” rear bag. He explains why it’s a super-stable choice in rear bags, one of the best products available. You’ll note we acquired a SEB BigFoot rear bag for our latest AccurateShooter.com Project Rifle (see story above). After providing tips on how to fill the bag with heavy sand, Trope shows how to adapt a RubberMaid “ActionPacker” plastic storage bin to carry both the SEB Front Rest and the BigFoot Bag.
If you are considering the purchase of a joystick-style front rest, or joystick-style rest top, you should definitely read Trope’s Rest Review. It will definitely help you identify the features you need, so you can make an informed decision, whatever brand you ultimately choose. To learn more about the SEB coaxial rest, or to place an order, contact Sebastian Lambang’s American dealer, Ernie Bishop:
Ernie Bishop
306 West Flying Circle Drive
Gillette, WY 82716
(307) 257-7431
ernieemily [at] yahoo.com
Share the post "Gear Review: SEB Coaxial Rest and Rear Bag"
SEB coaxial front rests are impressively engineered and beautifully machined. If you like a joystick-style rest, you won’t go wrong with a SEB. This editor shoots off one. Though the current SEB rest is nearly ideal for short-range benchrest, shooters have asked for an upgraded version that can handle heavier rifles (such as 22-lb, F-class guns), and wider fore-ends (up to 6″). Sebastian Lambang, creator of SEB rests, has been listening, and he’s hard at work perfecting a new “magnum” model that will work with big, heavy guns. It is hoped that the new model SEB rest will be available in summer 2009, but it’s “too early to know for sure”.
2009 Update: New SEB Rest in Research & Development Report by Ernie Bishop, USA Dealer for SEB Products
Seb’s goal is to make a new rest using an enhanced design (but it will still be a coaxial-type rest with double-sided functionality). It will have quicker elevation adjustment. It will also go lower and taller at the lowest & tallest setting (from about 4″ to 9″ tall, or more), and should accept rifle stocks up to 6″ wide. Here’s the good news — the price should be less expensive too. The new rest will still feature twin posts, with coarse elevation adjusted by rack & pinion. The center-to-center (“CTC”) between the posts is about 10″, to be able to accept rifle stocks up to 6″ wide. Like the current SEB rests, the new rest can be set up for either right-hand & left-hand shooters.
The new rest should suit a broader set of disciplines — it will work for short range BR, F-class, long-range benchrest shooting, and varmint shooting, too. Unfortunately, because of the specifications/requirements, Seb must remove the “pivotal base system” and make the base in “T” shape. The base can be disassembled for easily for more compact storage. By design, the new model rest can accept a “Balance Weight System” (BWS) better than the standard SEB rest, because the weight (which is optional) would not interfere with the front elevation screw, the fore-end stopper, or the base. This is the reason that the new base will have be built with a “T” shape.
The “BWS” is basically a counterweight, simply a chunk of stainless steel, attached on the side opposite side of the joystick. It’s an inexpensive, optional item, available in different weights. With the “BWS”, the SEB rests could accept rifles as heavy as 30 kgs (66 lbs.), or even more. This should be able to be accomplished without holding the joystick. If the weight is correctly matched to the weight of the rifle), I suspect that the rest top & “BWS” combination would remain stationary under hard recoil.
Hopefully the new rest will cost less than the current model rest. Seb is trying to keep the price under $700. This should be possible because of changes to the design and materials. It will retain the same standard of smoothness and quality that Seb is known for.
Finally, Seb asks for your patience. He is still evaluating materials and is still experimenting to determine what will work best. Besides this, Seb is working on an updated front bag design as well. (There is also an improved fore-end stop in the works.) Once this new rest is ready, Seb will be shipping some to the States for testing. Personally, I can’t wait to see this new rest!
Ernie Bishop
306 West Flying Circle Drive
Gillette, WY 82716
(307) 257-7431
ernieemily [at] yahoo.com
For more information on SEB front rests visit www.sebcoax.com, or contact Ernie Bishop (address above). Ernie notes: “I have a shipment of 15 rests coming toward the beginning of March. Currently, I am out of stock, and have started a waiting list. The USA price for a SEB Rest (including one 2.25” OR 3” front bag ) is $725.00 plus shipping/handling. Please don’t get confused by the price that is listed on Seb’s website. That price is for customers in countries where there are no SEB dealers.“
Share the post "SEB Rest Update — New Model in Development"
Mark Trope, Webmaster of the Gun Owner Network website, has written a very thorough review of the SEB Coaxial front rest. Mark’s SEB Rest Review covers all the bases, showing how the rest works with a variety of rifle types, including both wide-forearm match rifles and narrow-forearm sporter rifles. Mark provides dozens of clear photos of the rest, showing many of the fine points of SEB’s impressive design. The review shows how to set-up and level the rest, and how to tune the “feel” of the joystick to suit your preferences. Some rest users prefer the joystick to move quite freely, while others prefer to dial in some resistance so there is no chance of movement when you remove your hand from the joystick.
After covering the features and performance of the SEB Rest, Trope turns his attention to the SEB “BigFoot” rear bag. He explains why it’s a super-stable choice in rear bags, one of the best products available. You’ll note we acquired a SEB BigFoot rear bag for our latest AccurateShooter.com Project Rifle (see story above). After providing tips on how to fill the bag with heavy sand, Trope shows how to adapt a RubberMaid “ActionPacker” plastic storage bin to carry both the SEB Front Rest and the BigFoot Bag.
If you are considering the purchase of a joystick-style front rest, or joystick-style rest top, you should definitely read Trope’s Rest Review. It will definitely help you identify the features you need, so you can make an informed decision, whatever brand you ultimately choose. To learn more about the SEB coaxial rest, or to place an order, contact Sebastian Lambang’s American dealer, Ernie Bishop:
Ernie Bishop
306 West Flying Circle Drive
Gillette, WY 82716
(307) 257-7431
ernieemily [at] yahoo.com
Share the post "Detailed Review of SEB Coaxial Rest"
Review Quick Highlights:
“The joystick offers plenty of movement at 600 yards so staying on target throughout the shoot was no problem and, more importantly, I could swing onto my competitors’ targets as a final wind-check. Each of the three legs has its own ‘angle’ adjustment — enabling you to obtain a steady, level set-up on the most uneven of firing-points. The center pedestal can be raised and lowered using a mariner wheel and of course, there is the familiar joystick adjustment.”
Do-It-Yourself Joystick Rest — Jeff’s Labor of Love
Finally, Seb asks for your patience. He is still evaluating materials and is still experimenting to determine what will work best. Besides this, Seb is working on an updated front bag design as well. (There is also an improved fore-end stop in the works.) Once this new rest is ready, Seb will be shipping some to the States for testing. Personally, I can’t wait to see this new rest!
