In these two videos from the Rekyyli Ja Riista (Recoil and Game) YouTube Channel, you can see how a modern, short-range benchrest rifle is shot. Note how the gun tracks superbly, returning right on target, shot after shot. As a result, the shooter doesn’t have to adjust the rifle position after firing (other than pushing the gun forward), so he can quickly load and fire within seconds of the previous shot. Good rests and consistent, smooth bolt actuation keep the gun from rocking.
It does take practice to perfect the right technique for shooting free recoil (or nearly free recoil — with just a pinch on the trigger guard). And, of course, you must have a very good bag/rest set-up and the stock geometry and rifle balance must be perfect. The ammo caddy also helps by placing the cartridge up high, right next to the left-aide loading port. Hats off to Forum member Boyd Allen for finding these videos. Boyd told us: “Watch carefully — Now this is how it’s done.” [Work Warning: Loud gunshot noises — Turn Down Volume before playback.]
In this latest update, two new calibers have been added: .221 Remington Fireball and .300 AAC Blackout. (Lapua now makes .221 Fireball brass.) In addition, there is updated data for the popular .260 Remington cartridge. That’s good news as we know that many of our readers are looking for load data for the .260 Rem. Vihtavuori makes a variety of powders well-suited for both hunting and match loads in the .260 Rem.
The Vihtavuori Reloading Guide covers more than 20 different types of VV reloading powders. It was most recently updated in June, 2014. The online reloading info database at Vihtavuori.com has also been updated.
Data Tip from EdLongrange. We welcome reader submissions.
Lapua has a very cool video — “eye candy” for any precision shooter. Definitely WATCH THIS VIDEO. This 12-minute video contains a surprising amount of “hard” info on Lapua products. As well, there are some amazing segments showing Lapua brass and rimfire ammo being produced. Watch carefully and you’ll see most of the processes used for forming and loading brass. Another short segment shows a Lapua technician inspecting a case for run-out. Neat.
The video spotlights some of the important American and international records set with Lapua ammo. You’ll see top 300m and Olympic rifle shooters in action, and there are also short comments from many champions, including American Benchrest legend Tony Boyer.
NOTE: This is long video — you may need to let it buffer (pre-load) for 10-20 seconds before playback. If that doesn’t work, let the entire video load, then hit the replay button. Please enable Javascript and Flash to view this VideoPress video.
Yes, this video is first and foremost a marketing tool, but that doesn’t lessen that fact that it is fascinating to watch. We suspect many of you will want to save the video to your computer for future viewing. That’s easy to do. Just click on the link below. (Note: After downloading, we suggest that PC users play it back through Windows Media Player. You can then drag the Media Player corners to expand the video viewing size.)
It’s official. Representatives of Lapua announced at SHOT Show 2014 that Nammo has purchased Vihtavuori, acquiring the “VV” line of propellants, and, most importantly, taking over Vihtavuori’s powder production facility in Vihtavuori, Finland.
This means that Vihtavuori is now officially under the Nammo umbrella as is Lapua, producer of brass, bullets, and loaded ammunition. Lapua engineer Tommi Tuuri has visited the Vihtavuori plant in person. Tommi says all operations are going well and the plant is running at normal capacity (but Nammo does plan some upgrades in the months ahead). Vihtavuori powders will continue to be imported into the United States as before and the powders will be made available through existing distribution channels.
Learn More about Nammo Purchase of Vihtavuori Powder Factory
The Vihtavuori Powder factory is located in Vihtavuori, Finland. Click marker to zoom.
Breaking News: Just hours ago the Nammo Group announced that it has acquired the Finnish company Eurenco Vihtavuori OY, which produces Vihtavuori powders. This deal was finalized through the signing of a Share Purchase Agreement today, December 19, 2013.
The official press release adds that: “The agreement is subject to approval by French authorities. Filing is done and approval is expected to be granted within short time.” CLICK HERE to read Nammo/Eurenco Press Release PDF.
Lapua just dropped a bombshell — multiple bombshells, in fact. Lapua just announced that it will be producing .221 Fireball brass and .50 BMG brass starting early 2014. This will be the first truly match-grade brass ever offered for the .221 Fireball. That’s great news for varminters, who can use Lapua’s new .221 Fireball brass “as is” or neck it down to .20 Vartarg or 17 Fireball. Tactical shooters can also use the .221 Fireball brass to make the .300 Whisper and 300 Blackout sub-sonic cartridges. At the other end of the spectrum, ultra-long-range shooters now have a new ultra-premium brass source for the mighty .50 BMG. This is potentially a “game-changer” for fifty-cal shooters who have had to “make do” with military surplus brass for the most part. Lapua says the new brass, both .50 BMG and .221 Fireball, should be in the USA by early April, 2014. Sorry, no pricing info is yet available.
Here is the Lapua Product Announcement for .221 Fireball and .50 BMG Brass:
New 180-Grain and 150-Grain 7mm Scenar-L Bullets
The other big news from Lapua is the release of two new 7mm (.284 caliber) Scenar-L target bullets. Recognizing the popularity of 7mm cartridges among F-Class Open Division shooters, Lapua will offer a high-BC, 180-grain bullet. As part of the “L” series, this new 180-grainer bullet should exhibit extreme consistency in base-to-ogive measurements and bullet weight. We expect this new 180gr projectile to be extremely accurate in the .284 Winchester, .284 Shehane, 7mm WSM, and 7mm RSAUM — popular chamberings for F-Class and long-range benchrest shooters. No BC information has been released yet, but we expect the BC number to be quite high, giving this bullet great wind-bucking capability. In addition to the new 180gr 7mm Scenar-L, Lapua will offer a new 150gr 7mm bullet. This is optimized for medium range competition in Silhouette and Across-the-Course competition. It should offer great accuracy, but with less felt recoil than its 180-grain bigger brother.
If you are considering purchasing a sound moderator (aka “suppressor” or “can”) for one or more of your rifles, a video from Surefire explains the many benefits of modern suppressors. Sound moderators not only reduce the audible sound coming from a firearm, but they also reduce flash signature, dust signature, and recoil.
In the video below, Surefire highlights the features and benefits of its line of quick-attach suppressors. These are crafted from special alloys that are “stronger at 1000° F than stainless steel is cold.” While the video focuses on the use of suppressors by military and police personnel, these devices are also beneficial for hunters and competitive tactical shooters.
Noise Reduction
A shot from a .308 Win rifle can be as loud as 167 db to the shooter. Notably, the noise level can be just as great to someone positioned one meter away (Source: 1999 Finish Suppressor Trials). What’s worse is that popular muzzle brakes can INCREASE shooters’ noise exposure by 5 to 10 db. The noise level at which hearing damage can occur is about 140 db. A quality modern suppressor can reduce .308 Win rifle shot noise levels to 130 db or less.
Flash Signature Reduction
For a varminter, a quality suppressor can reduce the visible muzzle flash from a rifle by 90% or more. That’s important when hunting at night. The bright flash can both spook game and temporarily degrade the hunters’ night vision. Using a suppressor can help the shooter maintain his night-adapted vision.
Recoil Reduction
Recoil reduction is a real benefit. In 1992, Finland’s National Board of Labor Protection tested a variety of suppressors on both bolt-action hunting rifles and select-fire military rifles. The study concluded that recoil reduction was significant: “Suppressors reduced recoil energy by 20 to 30 percent, or about as must as muzzle brakes, making powerful bolt-action hunting rifles considerably less painful to shoot (especially repeated shots in training).”
Dust Signature
When firing prone, a rifle with a muzzle brake kicks up a large cloud of dust. (Watch video at 3:00). In a military situation, this dust signature can reveal the shooter’s position — with potentially disastrous consequences. For a tactical competitor, the dust may prevent recognition of a hit while impeding a rapid second-shot. For the varminter, the dust cloud is a nuisance that may prevent him from seeing his hits, while sending critters scurrying back into cover.
Message to Politicians — Suppressors Will Save Tax Dollars
Here is an interesting finding from the 1992 Finland Suppressor Project: “The unit price of a mass-produced suppressor may be reduced to $50 to $70 (1992 prices). [This low cost] will make cost-effectiveness of the suppressor far better than that of any shooting range [sound-proofing]… and, actually, also better than the cost-effectiveness of hearing protection, especially when several persons are present while just one of them is shooting at a time.” Too bad most politicians can’t seem to understand these points. They still view suppressors as evil tools employed by gangsters, rather than proven safety devices that will reduce noise pollution.
Is the “price of noise” something we really need to consider from a public policy standpoint? Absolutely. In 2004 the Veterans Administration paid out $633.8 million in compensation to 378,982 vets whose main disability is hearing loss. Only a small fraction of those vets saw combat; most damaged their hearing during weapons training activities.
In a world where too many companies have down-graded product quality and durability, we’re lucky there are some fanatical Finns who build great stuff for shooters. For serious handloaders, the cartridge brass of choice is made by Lapua in Finland. Lapua brass lasts longer than most other brands of cartridge brass, with industry-leading case-to-case uniformity. How do the Finns manage to make such good brass and loaded ammo? This informative video provides insights into Lapua’s “passion for precision”. This “must watch”, 12-minute video contains a surprising amount of “hard” info on Lapua products, with segments showing Lapua brass and rimfire ammo being produced. Watch carefully and you’ll see most of the processes used for forming and loading brass. Another short segment shows a Lapua technician inspecting a case for run-out.
The video spotlights some of the important American and international records set with Lapua ammo. You’ll see top 300m and Olympic rifle shooters in action, and there are also short comments from many champions, including American Benchrest legend Tony Boyer.
NOTE: This is long video — you may need to let it buffer (pre-load) for 10 seconds before playback. If that doesn’t work, let the entire video load, then hit the replay button. Please enable Javascript and Flash to view this VideoPress video.
Yes, this video is first and foremost a marketing tool, but that doesn’t lessen that fact that it is fascinating to watch. Lapua’s video also does a great job making our sport seem important and exciting — NRA take note! We suspect many of you will want to save the video to your computer for future viewing. That’s easy to do. Just click on the link below. (Note: After downloading, we suggest that PC users play it back through Windows Media Player. You can then drag the Media Player corners to expand the video viewing size.)
To celebrate its 90th anniversary, Lapua invited six of its shooting team members to visit the firm’s ammunition factory in Lapua, Finland. The team members hailed from six countries around the world: Kevin Nevius (USA), Eva Friedel (Germany), Josselin Henry (France), Charlotte Jakobsen (Denmark), Kim-Andre Lund (Norway), and Peter Sidi (Hungary). Watch the video to follow these six shooters as they tour the Lapua ammo factory, and then compete in a 100m/600m fun match at Lapua’s test range.
See Lapua Ammunition Factory from the Inside
After being greated by Nammo Lapua CEO Raimo Helasmäki, the six lucky shooters got to tour production facilities, visit the old cartridge factory museum, and share ideas with Lapua R&D engineer Tommi Tuuri. The engineer observed: “No matter how much you calculate, there are always some surprises — things you can only know from the test runs.”
Competition at 100m and 600m
The trip finished with a friendly “bragging rights” match at Lapua’s own Ampumarata Shooting Range. These six champions had to quickly master two very different rifles, a Panda-actioned 6PPC benchrest rig for 100m and a SAKO TRG-42 in .338 Lapua Magnum for long range (600m). Kim-Andre Lund from Norway won the benchrest match with a 0.157″ (3.98mm) group. Not bad for a position shooter not familiar with this kind of gun, or this rest configuration. Kim observed: “I think maybe I’m in the wrong discipline, maybe benchrest is the thing for me”. Check out his target at right.
The USA’s own Kevin Nevius posted the top score with the big .338 LM. Kevin had a great time: “I’m a bonafied gun nut… so to come to a factory that manufactures ammunition is a dream come true.”
This video features a factory walk-through showing bullet-making, cartridge forming, and bullet packaging. Near the end (at 5:40 time-mark) is a fascinating sequence showing the high-speed robotic arms that pick loaded ammunition from the assembly line.
Beautiful Lapua 6.5-284 brass awaits packaging and shipping.
Eurenco (European Energetics Corporation) is a French company owned by the SNPE Group. Eurenco specializes in production of propellants and explosives. Eurenco currently owns and operates five modern production plants in Belgium (Clermont), Finland (Vihtavuori), France (Bergerac, Sorgues) and Sweden (Bofors AB, Karlskoga). Readers are doubtless familiar with Vihtavuori powders, which are marketed and distributed by the Nammo Lapua group based in Finland. Though Nammo Lapua distributes Vihtavuori powder, Eurenco actually owns the Vihtavuori factory located in Vihtavuori, Finland.
Eurenco Looks for Buyer for Vihtavuori Plant
On June 18, Eurenco stated that it is “considering” selling the Vihtavuori Ltd. production facility to a third party. This factory currently employs 100 workers, and has annual revenues of $15 million Euros.
Eurenco hopes to sell the plant to a Finnish company, and we are informed that at least one investment group from Finland is interested. Eurenco revealed no immediate plans to shut the facility or to curtail production while Eurenco seeks a buyer. However, Eurenco said that the primary reason for selling the plant was reduced military demand for Vihtavuori products in recent years.
No Change in Vihtavuori Powder Distribution in USA
We discussed the potential Vihtavuori factory sale with Adam Braverman, U.S. representative for Nammo Lapua. Adam first noted that Nammo Lapua is NOT a potential buyer for the plant: “That’s not on the table.” But Adam emphasized that he forsees no changes to the current Vihtavuori distribution scheme: “Vihtavuori powder buyers should expect ‘business as usual’. We do not forsee any price or product availablity changes in the short term. There is plenty of powder inventory available, so we can fill all existing demands through the end of 2012.” While Eurenco looks for a new owner of the Vihtavuori plant, there will be no changes to the current system of distribution of Vihtavuori powders in the USA. Adam said: “There is plenty of powder in the European warehouses, and Nammo Lapua will continue to export Vihtavuori propellants to the USA importers (Hodgdon and Kaltron) who will distribute them to our retailers. We do not anticipate any supply shortages.”
In these two videos from the Rekyyli Ja Riista (Recoil and Game) YouTube Channel, you can see how a modern, short-range benchrest rifle is shot. Note how the gun tracks superbly, returning right on target, shot after shot. As a result, the shooter doesn’t have to adjust the rifle position after firing (other than pushing the gun forward), so he can quickly load and fire within seconds of the previous shot. Good rests and consistent, smooth bolt actuation keep the gun from rocking.
Flash Signature Reduction
Competition at 100m and 600m
Eurenco hopes to sell the plant to a Finnish company, and we are informed that at least one investment group from Finland is interested. Eurenco revealed no immediate plans to shut the facility or to curtail production while Eurenco seeks a buyer. However, Eurenco said that the primary reason for selling the plant was reduced military demand for Vihtavuori products in recent years.
