|
|
November 12th, 2011
Grafs.com is running promotions right now on new products from Hodgdon Powder Co. and Nosler. First, Grafs.com has Hodgdon’s new CFE223 in stock for $21.99 per pound. This new powder is ideal for the .223 Rem and other popular chamberings. We’ve found that CFE223 delivers good velocity and it meters well. Hodgdon claims the proprietary powder formulation can reduce the amount of copper fouling in barrels — so you can shoot more and clean less. What’s more — if you purchase 32 pounds of smokeless powder, Grafs.com will waive the $25.00 hazmat fee, and yes you can “mix and match” different types of powder in your order.
Next, Grafs.com is offering promo pricing on Nosler’s new Varmageddon 40gr, flat-based polymer-tipped Varmint bullets. These new bullets run fast from a .223 Rem. The special tapered-wall jacket design (thin-wall at top, thick at bottom) and the polymer tip assure explosive impact on prairie dogs and other critters. A 100-ct box of .224 cal, 40gr Varmageddon projectiles is just $14.29.
Share the post "New Hodgdon CFE223 Powder and Nosler Varmageddon Bullets"
October 11th, 2011
 Hodgdon Powder has introduced a new spherical (ball) powder called CFE™223. Hodgdon claims that this new powder “greatly deters copper fouling” compared to other propellants. Originally developed for U.S. rapid-fire military systems, CFE™223 incorporates a proprietary chemistry named “Copper Fouling Eraser”. Based on tests with extended shot strings, Hodgdon claims that, by using CFE™223, match shooters, varmint hunters, and AR shooters can maintain accuracy for longer periods, with less barrel-cleaning time.
Load Data Now Available Online for CFE™223
Reload data for CFE™223 is available for 27 different cartridges with 147 loads. It is suitable for loading in many popular chamberings including: .204 Ruger, .223 Rem, 22-250, 6mmBR, .243 Win, 6.5 Creedmoor, .260 Rem, 7mm-08, and .308 Win. Maximum velocities are obtained in the .204 Ruger, .223 Rem, 22-250, and .308 Win with load data found at Hodgdon’s Reloading Data Center. CFE™223 is a spherical (ball) powder, so it meters well. The new powder will be available in one- and eight-pound containers starting in January, 2012. For more info, call (913) 362-9455 or write to: Hodgdon Powder, 6231 Robinson, Shawnee Mission, KS 66202.
Share the post "Hodgdon Claims New CFE™223 Ball Powder Deters Copper Fouling"
December 15th, 2010
Many folks have been anxiously awaiting the release of Hodgdon’s new Superformance and LeveRevolution powders, high-velocity blended propellants originally developed by Hornady. For select cartridge types, Hornady claims, these new blended spherical powders can deliver 80 to 150 FPS more velocity than other powders on the market.
 Well wait no more — Superformance and LeveRevolution powders are both IN STOCK at Grafs.com now. Both 1-lb and 8-lb containers are in stock. If you’ve been wanting to experiment with either of these new powders — get yours before it’s gone. Supplies are limited.
Here are the options:
Superformance 1LB, Item # HDHSP1, Price: $21.99
Superformance 8LBs, Item # HDHSP8, Price:$153.99
LEVERevolution 1LB, Item # HDHLR1, Price: $21.99
LEVERevolution 8LBs, Item # HDHLR8, Price: $153.99
Share the post "Superformance & LEVERevolution Powders in Stock at Grafs.com"
December 12th, 2010
Many of the most popular powders sold under the Hodgdon brand in the USA (including Varget and H4350) are actually made by Thales Australia Ltd. (formerly ADI, Ltd.) in Australia. Some load manuals list Thales (ADI) data, but not Hodgdon data, or vice-versa, so we’ve compiled this list of equivalent powders. If you can’t find a recommended load for a particular Hodgdon powder in your caliber, download the latest ADI Smokeless Powders Handloaders Guide (2010, 5th Edition), a 5-megabyte Acrobat file.
Here’s a list of ADI to Hodgdon Powder equivalents:
AS30N=Clays
AP50N = (No Hodgdon)
AS50N = International
AP70N = Universal
AP100 = (No Hodgdon)
AR2205 = H4227
AR2207 = H4198
AR2219 = H322
Bench Mark1 = (No Hodgdon)
Bench Mark2 = BenchMark |
AR2206 = (No Hodgdon)
AR2206H = H4895
AR2208 = Varget
AR2209 = H4350
AR2213 = (Discontinued)
AR2213SC = H4831
AR2217 = H1000
AR2225 = Retumbo
AR2218 = H50BMG |
About IMR 8208 XBR
NOTE: Although new IMR 8208 XBR is made by Thales (ADI), Hodgdon has not published an ADI-equivalent product code. Thales has loaded some of the 8208 XBR into military ammo. However, Thales Australia Ltd. tells us: “[We] have yet to release the IMR 8208 XBR propellant in Australia to the sporting shooters market; thus it does not have an equivalent Thales (ADI) name”.
Share the post "Hodgdon Equivalents for ADI Product Codes"
October 14th, 2010
 The 2011 edition of the Hodgdon® Annual Manual has just been announced, and should be at newstands in January 2011. Now in its 8th year, the Hodgdon Annual Manual includes over 5,000 rifle and pistol loads, with information on 29 Hodgdon, 19 IMR® and 10 Winchester® brand powders, with updated propellant burn rate and usage charts.
The new 2011 Manual features 31 cartridge updates including the new 30 AR Remington and 338 Marlin Express. The latest manual of course incorporates the 44 cartridge updates from 2010, which included data for the 6.5 Grendel and 6.5 Creedmoor.
Extensive reloading information is provided for popular cartridges such as the 223 Remington, 204 Ruger, 6PPC, 6mmBR, .243 Win, 308 Winchester, .30-06, 338 Federal and more. In addition, the 2011 manual boasts 70 pages of shooting and hunting feature articles by top outdoor writers.
New Superformance Powder Data Included
The 2011 Hodgdon Annual Manual includes comprehensive load data for the two new Hodgdon powders, Hornady® Superformance™ and Hornady LEVERevolution®. This pair of advanced, high-speed propellants are currently used in Hornady’s factory ammunition. Both powders can provide a significant performance boost in many popular cartridges.
The 2011 Hodgdon Annual Manual costs $8.99 at news-stands or $11.99 delivered via mail from Hodgdon. To order call 913-362-9455, visit Hodgdon.com, or write to Hodgdon Powder, 6231 Robinson, Shawnee Mission, KS 66202.
Share the post "Hodgdon Announces New 2011 Reloading Manual"
August 21st, 2010
Hodgdon will introduce two new propellants in 2011, LEVERevolution and Superformance. According to Chris Hodgdon, these powders will allow hand-loaders to replicate Hornady’s factory-loaded LEVERevolution and Superformance ammunition. Hornady used proprietary powder blends to achieve impressive velocities in its Superformance ammo. Now reloaders can take advantage of that blending technology to get more performance from their hand-loaded cartridges.
According to the Shooting Times website, the two new powders should be available starting in January 2011: “This is welcome news to handloaders who until now have had to sit by and watch as factories make the best use of new bullets such as Hornady’s FTX and mass-produced loads that handloaders couldn’t safely duplicate. This should also be welcome news to shooters who until now have avoided new high performance cartridges over concerns about future high performance ammunition availability.”
Share the post "Hodgdon Will Introduce Two New Powders in 2011"
August 15th, 2010
Powder Valley, a major vendor of powder, primers, brass, bullets, and loaded ammo, has received some large shipments of popular powders including Hodgdon Varget and IMR 8208 XBR. Powder Valley also has the hard-to-find Alliant Reloder 17 powder in stock, in both 1-lb and 5-lb containers.
 Powder Valley Now Stocks Factory-Loaded Ammo
FYI, Powder Valley is now stocking quality factory-loaded ammo from Lapua, Hornady, Nosler, Prvi Partizan, and Wolf. If you’re looking for match-grade Lapua factory ammo or the Hornady .223 Rem, 6.5 Creedmoor, and .30-06 ammo, give Powder Valley a call at 800-227-4299.
Powder Valley Inventory Updates on Facebook
Powder Valley now posts recent product arrivals on Facebook. If you have a Facebook account you can link to the Powder Valley page to get the latest updates.
August 13
IMR 8208: Finished up the backorders on 8208 8#. We received in about 200 kegs from Hodgdon last week and have filled backorders that were placed prior to June 25.
August 12
Large shipments of primers received over the last couple days. Received 2 million Winchester, 1.2 million Federal, 1.5 million Rem and 6 million Tula. Also received large shipment of Winchester brass.
August 6
Varget 8-lb jugs have arrived. We won’t update the website until Monday. Facebookers go ahead and put your order in now and you will get first dibs.
August 2
Received in about 2 million Remington primers. Also, received a large shipment of backorders from Berger. We will be receiving about 125,000 Federal Small Pistol primers later this week and about 2-2.5 million in 3-4 weeks. We will begin listing these primers on the website August 3 so you can place an order if you would like.
Share the post "Powder Valley Has Hard-To-Find Powders & Primers in Stock"
March 15th, 2010
We have a “Palma/Tactical” project gun in the works built with an Eliseo chassis, Borden action, and one of Krieger’s very first 5R barrels. Initial load testing with Hodgdon Varget showed excellent accuracy potential, but we weren’t achieving the velocity we hoped to get from the 30″ medium-Palma-contour barrel. With Lapua brass and Varget we ran short of case capacity when seating bullets to mag-length, and the best accuracy came at about 2860 fps, well under competitive Palma velocities.
Mark LaFevers with .308 Win Eliseo Tubegun on SEB NEO front coaxial rest. Mark made the wood front bag-rider.
Chris Hodgdon kindly shipped us some H4895 and some of the new IMR 8208 XBR powder, lot #1022510-4798. In beautiful 70° conditions yesterday, we did a quick pressure work-up with both powders to determine “practical max” loads with the Berger 155.5gr Fullbore bullets (#30416). The 155.5s were loaded in once-fired Lapua brass with CCI BR2 primers, to a COAL of 2.860″, which is about .010″ short of land contact.
Varget-beating Speeds from Both IMR 8208 XBR and H4895
We loaded up two rounds at each charge weight, starting with the Hodgdon’s recommended starter load for a 155gr Sierra HPBT, as found in Hodgdon’s online Reloading Data Center. (There was no load listed for the 155.5gr Berger). It’s good that we started low because we saw immediately that both the 8208 XBR and the H4895 were yielding much more velocity, grain for grain, than Varget. Though we were not shooting for groups, the 8208 XBR also seemed to have a very large accuracy load window. Moreover, the velocity spreads for each two-round 8208 charge (above 43.0 grains) were remarkably low — none were more than 6 fps, and the velocities on our two 44.0-grain shots were exactly the same — 2992 fps. (This was NOT an error — the chron registered both shots #7 and #8.)
Of course, you can’t conclude much about ES/SD from just two shots, but the speed consistency in the 8208 was notable as you can see from the chart above. By contrast, each pair of H4895 shots varied in speed much more. For example, the two-shot ES for 43.0 grains of H4895 was 14 fps, while the two-shot 8208 XBR spread (for 43.0 grains) was 4 fps. It will be interesting to see if further testing confirms the low ES/SD potential of IMR 8208 XBR in the .308 Winchester.
We dispensed charges with an RCBS ChargeMaster calibrated and leveled on a granite bed. The 8208 XBR has smaller kernels than either Varget or H4895 and, as we expected, 8208 XBR dispensed very easily. The H4895, with longer kernels, dispensed fine in the ChargeMaster, but it took the machine more time to trickle the H4895.
As noted, we didn’t shoot for groups, but the IMR 8208 looked like it would shoot really well at anywhere from 43.0 to 44.0 grains. The H4895 proved accurate as well, at least in the high pressure ranges. We need to do 5-shot testing, over flags, before drawing any real conclusions. But right now we can say that, if you’re shooting a .308 with 150-155 grain bullets, you should definitely try the IMR 8208 XBR. It looks like a near-perfect match for the Palma-class bullets. The velocity is great, it appears the ES will be very low, and 8208 XBR packs more densely than Varget so you won’t have to run compressed loads.
Our most important discovery was that both 8208 XBR and H4895 offered significant velocity gains over Varget, at least in this rifle. It looks like 8208 XBR can run 2990 fps in this gun without pressure issues, while H4895 may top 3000 fps. Varget struggled to get much past 2900 fps.
IMPORTANT WARNING: The stated max load for IMR 8208 XBR with a Sierra 155gr HPBT was 45.3 grains, while the stated max load for H4895 (same bullet) was 46.0 grains. Note that, in this rifle, which has a tight 0.298″ Palma bore, we hit pressure limits well before reaching Hodgdon’s “book max.” Read that again carefully folks. Our 44.0 grain “practical max” for 8208 XBR was a FULL GRAIN less than the stated max load with a Sierra 155-grainer. Likewise we started getting stiff bolt lift at 44.3 grains of H4895 — a long way from the 46.0 grain stated max. So, the combination of a different bullet, and a tighter-than-normal bore made a significant difference in pressures. This is why, if you change ANY component in a load recipe you MUST start low for safety. And never assume that a factory “Max Load” is safe or “conservative”.
Share the post "IMR 8208 XBR Performs Well in .308 Win Testing with 155s"
February 6th, 2010
The new IMR 8208 XBR powder is quickly acquiring a reputation for accuracy and pressure stability over a very wide range of temperatures. In addition, it looks like 8208 XBR has a huge load window for accuracy, at least in the 6 PPC cartridge. Here are five successive targets shot by journalist James Mock. With loads range from 30.5 grains to 31.5 grains, Mock nailed five “zero” groups in a row. (These were all three-shot groups.) Mock nailed “zeroes” over a full grain load-weight spread. That’s very impressive, and it bodes well for those who want to spend less time “tuning” their loads.
James observes: “[Here are] 5 consecutive ‘zeroes’ with charges from 30.5 to 31.5. I used a Krieger barrel (583 rounds) and a BAT Model B action. The bullets are from Del Bishop. I used both Wolf SR and Fed 205 primers.The combination that I used that day was really working. The Bishop 65 grain FB bullets were seated to just touch the lands in a barrel with 583 rounds.”
Share the post "Mock Demonstrates IMR 8208 XBR Accuracy and Wide Load Window"
January 28th, 2010
 We know many of our readers are interested in the new IMR 8208 XBR powder distributed by Hodgdon Powder Company. Early test lots of this new propellant have already won important benchrest matches, and field testing has shown that it is extremely stable across a wide temperature range. At SHOT Show 2010, we interviewed Chris Hodgdon, who gave us the “inside story” on this new powder. Before we started taping, Chris shared with us lab test results showing how pressure of a fixed load varied with ambient temperature. The data was stunning. Basically 8208 XBR showed almost constant pressures from below freezing to well over 100° F. This editor has personally never seen a powder test that revealed “flat-line” results like 8208 XBR, with recorded pressures remaining virtually unchanged over a huge temperature range. If the test results are to be believed, this is indeed a very exceptional powder.
On some internet Forums, skeptics have suggested that IMR 8208 XBR is just an “odd lot of H322″, and that, accordingly, 8208 XBR may not be available for long. Chris told us that the skeptics are misinformed — those who have suggested that 8208 XBR is re-labeled H322 are completely wrong. IMR 8208 XBR IS something new and it IS here to stay. IMR 8208 XBR is NOT merely a “tweaked” blend of H322. Though 8208 XBR has small kernels like H322, allowing it to meter well, 8208 XBR is a completely new formulation. Moreover, IMR 8208 XBR is not going to be a “one-production-run” wonder. Chris explained that Hodgdon is fully committed to long-term production of this new powder. So if you acquire some now, and develop a great load, rest assured that you will be able to obtain more IMR 8208 XBR in the future. As Chris explains in the interview, Hodgdon is strongly committed to IMR 8208 XBR and Hodgdon plans to keep it in production for a long time.
Share the post "SHOT Show Report: Chris Hodgdon Sets the Record Straight Regarding IMR 8208 XBR"
January 7th, 2010
 Hodgdon Powder Company announced that an error occurred in printing of the 2010 version of the Hodgdon Annual Manual. Pages 108 and 109 in the manual, which cover 7mm caliber load data, appear in reverse order. But don’t despair — you can get a free correction from Hodgdon. Do not use the 7mm caliber data as it appears in the 2010 Hodgdon Annual Manual until the corrected copy is received.
Contact Hodgdon Powder Company for a free reprint of pages 108-109. You can phone 913-362-9455, fax 913-362-1307, or send email to help@hodgdon.com. You can also send postal mail to: Hodgdon Powder Co., 6231 Robinson, Shawnee Mission, KS 66202
All Hodgdon, IMR®, and Winchester® reload data is also available on-line at hodgdon.com, imrpowder.com, and wwpowder.com in the Reloading Data Center.
Share the post "Printing Error in Hodgdon 2010 Manual — Get Free Fix"
December 21st, 2009
 Grafs.com has received a large shipment of the new IMR 8208 XBR powder. This is good news as Powder Valley recently sold out. Grafs.com has both 8-lb jugs for $149.99 (item IMR82088) as well as smaller 1-lb containers for $21.99 (item IMR82081).
If you haven’t heard about IMR 8208 XBR, this is a very promising new powder that is very accurate, meters well, and is much less temp sensitive than other powders of similar burn rate. This powder should be ideal for many applications including .223 Rem, .204 Ruger, 6 PPC, and .308 Winchester. Will 8208 XBR work in a 6BR or Dasher with heavy bullets? We’ll let you know soon — we’re planning to test it ourselves with an 8-twist 6mm BR.
Share the post "IMR 8208 XBR in Stock at Grafs.com"
|
