A unique, comprehensive Cartridge Comparison Guide is available as a 340-page, spiral-bound book. Covering over 250 cartridges, the updated Second Edition of the Cartridge Comparision Guide is the product of many years of labor by Andrew Chamberlain, a Utah-based hunter. Andrew says his Guide “compares every factory available cartridge from the 17 calibers up to the 50 caliber cartridges”. (Sorry, most wildcat cartridges are not covered.) Chamberlain’s Guide also compiles cartridge data from major ammunition manufacturers such as Barnes, Federal, Hornady, Norma, Nosler, Remington, Sierra, Swift, Weatherby, and Winchester. It shows the optimal velocity achieved for each bullet weight and calculates bullet energy, recoil, and powder efficiency. Large color photos illustrate handgun and rifle cartridges.
The Cartridge Comparison Guide provides data for thousands of cartridge/bullet/velocity combos. Quick reference data sheets and ballistics charts cover Trajectory, Velocity, and Energy out to 500 yards. The Cartridge Comparison Guide also offers a firearms lexicon, plus Appendices covering Cartridge Selection for Game Animals, Bullet Selection/Design, Bullet Expansion, Wound Channel Characteristics and more.
New Content in Second Edition of Cartridge Comparison Guide
The Cartridge Comparison Guide (Second Edition) costs $32.95 plus shipping and tax. CLICK HERE to visit the Online Store where you can order the 340-page book. Here’s what’s new in the Second Edition:
Addition of Shotgun Ammunition (Both Slug and Shot loads).
Momentum Calculation for all Rifle, Shotgun and Handgun loads.
Integration of Shotgun Slug Ammunition with Center Fire Rifle Data Tables.
Factory Load Summary Added (Shows manufacturers and loads produced).
One factory load and one hand load for every bullet weight available in each cartridge.
Over 90 pages of additional ballistics content (roughly 35% more than in First Edition).
Award-Winning Content
The Cartridge Comparison Guide has been awarded the POMA Pinnacle Award for Excellence. (POMA, the Professional Outdoor Media Association, is the trade association for outdoor writers).
Great Resource for Hunters
One of Chamberlain’s main goals in creating the Cartridge Comparison Guide was to help hunters select the “right cartridge for the job.” According to Chamberlain: “This started as a personal project to gather information on the more popular cartridges commonly used for hunting. I began comparing cartridge performance, versatility, bullet selection, powder efficiency, recoil generation vs. energy produced, standing ballistic data for different environments, etc.” Chamberlain adds: “I wanted to find the best all-around performing cartridge and rifle that a guy on a budget could shoot.”
Giant Cartridge Poster for Computer Wallpaper (1665×1080 pixels)
Here’s a great illustration of hundreds of cartridges and shotshell types. For dedicated reloaders, this would work great as desktop “wallpaper” for your computer. CLICK HERE for full-size image.
SHOT Show in Las Vegas is just two weeks away. Here are some of the interesting new products that will debut at SHOT Show. You can find these items and hundreds more new-for-2016 products at the SHOW Show New Product Center.
The Newcon Optik Spotter LRF is a combined spotting scope and laser rangefinder — the first of its kind. This unique piece of equipment integrates a Newcon Optik Laser Rangefinder with a 15-45X Spotting Scope with etched mil-dot reticle. Newcon Optik claims a 5500m maximum range for the LRF. The integrated scope/LRF is housed in a rugged yet light-weight MIL-SPEC housing. We like the idea of a combined Spotter/LRF. Will other companies try to copy Newcon Optik’s innovative design?
Mason Target Systems — AR500 Steel Target With Shot Sensor
The MTS Target System “Pescadero” unit combines a rugged AR500 steel target with a durable electronics and sensor package that allows shooters to view their shots on a mobile App. With on-board power and wireless communication technology, the system will display shot location to the shooter positioned hundreds of yards away. So you can hear the “ding” of steel and then see your exact shot location on your smart phone or tablet. To aid aiming, the Pescadero target can mount self-healing polymer targets to the AR500 steel plate. Visit MasonTargetSystems.com for more information.
Schweitzer Optics — First-Ever Double FOV Scope
Here is a very innovative new hunting scope that actually displays a 3.5 X view AND and 1.0 X view simultaneously. Schweitzer claims this is the first and only double Field of View (FOV) sports optic in the world. This innovative optical technology doesn’t come cheap — Schweitzer’s Eagle Eye 3.5 dual POV scope retails for $2500.00.
Annealing Made Perfect — Induction Annealing Machine
No more flaming torches (and burned fingers). The AMP Annealing system anneals through electrical induction. This micro-processor controlled, precision-calibrated induction annealer provides exact and repeatable neck hardness. With the various AMP-made pilot inserts, the machine will handle popular cartridge types from .17 Caliber all the way up to 460 Weatherby. Anneal times are pre-programmed for optimal results.
Accu-Tac — SR-5 Tactical Bipod
The Accu-Tac SR-5 Bipod is crafted from high-quality billet aluminum. The SR-5 mounts quickly and securely to a 1913 Picatinny rail. The bipod’s wide stance provides good stability. Ratcheted leg extensions adjust to five different heights, and then retract quickly with a one-button retraction lever. Legs can be deployed in a conventional 90-degree orientation, or at a 45-degree angle either forwards or rearwards.
Lyman Products — Cyclone Rotary (Wet) Tumbler
Lyman is introducing a new Rotary Tumbler for 2016. Designed for use with stainless (pin-type media) and liquid, this Cyclone Tumbler gets brass thoroughly clean inside and out. The large capacity drum holds up to 1000 pieces of .223 Rem brass and features a rubber lining to protect brass and greatly reduce operating noise. The included two-piece sifter pans make separating cases and pins easy.
Swiss+Tech Products — Tac20 Firearms Multi-Tool
This new multi-function gun tool contains 4 driver bits, 2 Torx drivers, 2 Allen drivers, gun pin punch, sight wrench, castle nut wrench, flat screwdriver, bottle opener, knife, and LED flashlight. It even contains a fitting with a male thread connection for attaching cleaning rods. That’s clever. All totaled, the Tac20 multi-tool offers 20 features — that’s a lot of functionality in a small, compact package from Swiss+Tech Products.
There’s a chap in Poland named Łukasz Pietruszka, who is a bonafide “Wizard of Wood”. Lukasz handcrafts unique custom stocks, selling them through his LP Gunstocks company. Many of his most eye-catching stocks are for airguns (particularly Field Target rifles), but he also produces fine stocks for rimfire and centerfire hunting rifles. Lukasz is a master carver who includes exquisite details on many of his stocks. Some of these designs, crafted from exotic hardwoods, raise stock-crafting to an art form.
Check out the figure on this Turkish Walnut stock by Łukasz Pietruszka.
You can see a variety of Lukasz’s stocks in a video sampler. If you’re a fan of fine wood, you’ll love this video. So pull up a chair, grab your favorite beverage, and enjoy this 16-minute video interlude.
Watch Video in High Definition
NOTE: We recommend you view this video in high definition, in wide screen format. To do this, start the video, then click on the gear-shaped icon at the lower right-hand corner of the video frame (it’s located just to the right of the clock icon). If you have a fast internet connection, select 720P or 1080P from the pop-up menu. (1080P is the highest resolution.) Now select theater mode or full-screen mode using the small icons on the lower right of the frame.
Radical ‘Shockwave’ from LP Gunstocks
Here is a truly amazing bit of craftmanship. The images below show a one-of-a-kind Shockwave stock created by Łukasz for a Steyr Field Target air rifle. Over the top? Perhaps… but you have to admire the imaginative design and exquisite worksmanship.
Video find by Boyd Allen. We welcome reader submissions.
The R-F Cam Cradle is a smart new product that lets you securely mount a Laser Rangefinder (LRF), digital camera, and spotting scope all on a single tripod. The “game-changing” feature of the R-F Cam Cradle is that it allows you to colimmate (i.e. precisely align) all your optics on the same spot. This way you can simultaneously aim all three devices at a long range target by simply moving the tripod head. A tactical shooter can easily range his target while watching the wind though his spotting scope. And the long-range hunter can range and film his prey as he watches it through the spotter. This unit costs $179.95 from DefensiveEdge.net.
You’ll find a detailed product evaluation of the R-F Cam Cradle on the LongRangeOnly.com website. Reviewer Sam Millard uses the R-F Cam Cradle in the field with a variety of optics and rangefinders. Millard explains how the R-F Cam Cradle conveniently allows combined use of spotting scope, LRF, and compact video camera.
Millard was very impressed with the system: “I field-tested the R-F Cam Cradle in the mountains of northern Idaho and the wide open spaces of eastern Wyoming. I believe the most effective way to use the cradle is in a long range ambush; get the spotting scope, camera, and LRF aligned on a landmark, then lock it down. The LRF and spotter won’t be aligned perfectly, but they’ll be well within the field of view of each other, requiring only a gentle tilt of the tripod to center the beam of the LRF on the target. At ELR distances, a well-supported LRF is crucial to obtaining an accurate range. This mount makes it easy, and doesn’t require displacing your spotting scope to get it done.”
See R-F Cam Cradle Demonstrated in the Field:
Having a video camera mounted in alignment with spotting scope is great for Long Range applications notes Millard: “The camera mount is my favorite feature of the R-F Cam Cradle. It allows co-witnessing the video camera to the spotting scope, then aiming the field of view of both with one movement of the tripod head. This is a great improvement to the normal way of recording the shot and spotting at the same time, which previously required two tripods or a clamp-on head for the camera, both of which required separate aiming of the camera and spotting scope.”
R-F Cam-Cradle Product Details
Manufacturer: RLC Customs
Vendor: Defensive Edge, Inc.
Rathdrum, ID DefensiveEdge.net
Order Phone: (208) 687-2659
Material: 3/16” 53 Series aluminum
Finish: Powder-coated Matte Black
Total Weight: 16.5 ounces
Mount: ¼-20 Threaded Standard Camera Mount
Retail price: $179.95
Shawn Carlock of Defensive Edge explains: “The R-F Cam Cradle is a way for one person to run everything. Otherwise it’s really difficult to run the spotting scope, run the video camera, run the rangefinder, get dope — do all those different things. So RLC Customs has come up with the idea to put everything together in one platform, where you can sync it together and use it effectively, as a cluster.”
Product Find by Boyd Allen. We welcome reader submissions
IMR just announced its latest Enduron powder, IMR 4955, which features a medium-slow burn rate similar to Hodgdon H4831 or IMR 4831. The IMR Enduron powders are clean-burning, temp stable, and feature a proprietary coating that helps reduce copper fouling. We are looking forward to trying IMR 4955 based on our positive experience with IMR 4166. We have used Enduron 4166 and have seen excellent accuracy in .308 Winchester and 6mm BR rifles.
IMR 4955 lands between IMR 4451 and IMR 7977 on the burn rate chart. Hodgdon, which distributes IMR powders, says that IMR 4955 works very well for cartridges such as 25-06 Remington, .270 Winchester, and the .300 Winchester Magnum. Perhaps this will prove a good choice for the .284 Win and .300 WSM as well (F-Open shooters take note). If you are currently using H4831 or H4831sc you should probably give IMR 4955 a try.
Hodgdon says IMR 4955 offers some important advantages:
1. IMR 4955 has a small kernel size. This allows the powder to flow through powder measures easily and meter very accurately.
3. IMR 4955 is very insensitive to temperature changes, so shooters should see uniform velocities across a broad temp range.
3. IMR 4955 has very good load density for medium and big game hunting cartridges (such as the .270 Win and .300 Win Mag).
4. Like other Enduron powders, IMR 4955 boasts a special additive that helps reduce copper fouling as the rifle is fired.
IMR 4955 Should Be Available Early Next Year
— Load Data is Online Now
IMR 4955 will be available in early 2016 in one-pound and eight-pound containers. With the addition of IMR 4955 to the series of Enduron powders, reloaders have a new, advanced-formulation powder that should work for a wide variety of popular cartridges — from the .260 Rem up to big magnums. Reloading data for IMR 4955 is now available online in the Hodgdon Reloading Data Center. Below is a sample of Hodgdon/IMR load data for IMR 4955 as used in the .300 Win Mag cartridge.
If you’ve been considering the new Nightforce SHV scope for a hunting application, head over to LongRangeHunting.com. There you’ll find an in-depth field test of the 4-14x56mm SHV by Nicholas Gebhart. This is a very thorough review — Gebhardt checks every feature of the scope and comparison tests the SHV against the more costly Nightforce NXS 3.5-15x50mm. Gebhardt even put the SHV scope in his freezer for a weekend to ensure there was no fogging.
Overall, Gebhardt was very pleased with the SHV: “Optical clarity, image brightness, contrast and resolution were all extremely good.” The tester also liked the MOAR reticle in his scope. He didn’t think it was too “busy” though he thought the hold-over lines would benefit from numbers: “Nightforce’s MOAR was easy to use and provided a clear sight picture for engaging small targets. The line thickness is perfect for both precise shot placement and visibility. My personal preference however would be for the even hash marks to be numbered for the entire lower portion of the reticle.” Gebhart noted that the SHV’s side parallax knob had yardage marking numbers that proved accurate (and handy to use) — most other scopes just have lines.
Nightforce SHV vs. Nighforce NXS
How did the new SHV stack up against the NXS in a side-by-side comparison? Gebhardt was impressed with the $995.00 SHV, saying it held its own with the pricier NXS model: “I took about 30 minutes to evaluate the optics of the SHV and see how it compared to an older Nightforce NXS 3.5-15X50. Both of these scopes are made in Japan but given the price differential, I expected to see some difference in the optical quality. To my surprise, I couldn’t find any optical difference between the two except for a very slight possibility of a brighter image with the SHV.”
Nicholas Gebhardt has been an active hunter primarily pursuing mule deer, antelope, coyotes and prairie dogs since he was old enough to legally hunt. Nicholas is also a precision rifle competitor and a Captain in the Montana National Guard.
National Hunting and Fishing Day (NHF Day) takes place on Saturday, September 26, 2015. The annual celebration serves as a reminder that conservation succeeds because of leadership and funding from hunters, shooters and anglers. National, regional, state and local organizations will run thousands of “open house” hunting- and fishing-related events around the country. Events will include Fishing Derbys, Hunting Expos, Wing-shooting tournaments, and much more. Over four million Americans will participate. For information on NHF Day, visit www.nhfday.org. To find NHF Day events in your state, click the links below.
Hunting season is right around the corner. That means its time to inspect all your hunting gear, including your scope set-up. A proper scope installation involves more than just tensioning a set of rings — you need to consider the proper eye relief and head position.
In this NSSF video, Ryan Cleckner shows how to set up a scope on a hunting or tactical rifle. Ryan, a former U.S. Army Sniper Instructor, notes that many hunters spend a small fortune on equipment, but fail to set up their rifle to use the optics optimally. Cleckner likens this to someone who owns an expensive sports car, but never adjusts the seat or the mirrors.
Ryan notes that you want your head and neck to be able to rest naturally on the stock, without straining. You head should rest comfortably on the stock. If you have to consciously lift your head off the stock to see through the scope, then your set-up isn’t correct. Likewise, You shouldn’t have to push your head forward or pull it back to see a clear image through the scope. If you need to strain forward or pull back to get correct eye relief, then the scope’s fore/aft position in the rings needs to be altered. Watch the full video for more tips.
Tips on Mounting Your Scope and Adjusting Your Comb Height:
1. Normally, you want your scope mounted as low as possible, while allowing sufficient clearance for the front objective. (NOTE: Benchrest shooters may prefer a high mount for a variety of reasons.)
2. Once the scope height is set, you need to get your head to the correct level. This may require adding an accessory cheekpad, or raising the comb height if your rifle has an adjustable cheekpiece.
3. Start with the rifle in the position you use most often (standing, kneeling, or prone). If you shoot mostly prone, you need to get down on the ground. Close your eyes, and let you head rest naturally on the stock. Then open your eyes, and see if you are too low or too high. You may need to use a cheekpad to get your head higher on the stock.
4. If your scope has a flat on the bottom of the turret housing, this will help you level your scope. Just find a flat piece of metal that slides easily between the bottom of the scope and the rail. Slide that metal piece under the scope and then tilt it up so the flat on the bottom of the scope aligns parallel with the flats on the rail. Watch the video at 8:40 to see how this is done.
Video find by EdLongrange. We welcome reader submissions.
This is one of the finest shooting videos we’ve ever seen. Set in the scenic Fjordland of northern Norway, this high-quality 15-minute video is part Nat Geo travelog, part ballistics lesson, part gear review. We wish we had the opportunity to join Ulf Lindroth and Thomas Haugland on their remarkable shooting adventure. This video was originally created for Great Britain’s Fieldsports TV Channel.
This is an outstanding video, recommended for anyone interested in long-range hunting.
Long range shooters Lindroth and Haugland traveled to the Arctic Circle to field test a new .338 LM Blaser R8 (in GRS stock) fitted with a Zeiss Victory V8 4.8-35x60mm scope. (Ammo is Norma-brand .338 Lapua Magnum). The video shows how they confirm the ballistics of the Norma factory ammo in the Blaser R8 rifle system.
Ulf and Thomas initially test out the system confirming drop at multiple yardages, and then use the rifle for practical accuracy. Ulf says: “If you know your hunting will demand a long shot, and you want to push the limit but still be sure to make the first-shot kill… If you want to do an ethical hunt, if you want to push that limit, you have to do [this kind of testing].”
Ulf Lindroth (above) observed: “We shot [at 808 meters] observed the misses, clicked our way into the target, and now we have the true drop at that distance… in this air pressure, in this temperature. From there we can start working to find our TRUE trajectory. And when we have THAT… we can get serious about some target shooting.”
In some areas of the country (California in particular), hunters are now forbidden to use bullets that contain lead. If you need a lead-free projectile for your deer rifle, consider Nosler’s E-Tip projectile. This has plenty of penetrating power and retained energy while complying with laws requiring “unleaded” ammunition. An “expansion chamber” behind the green polymer tip helps ensure reliable expansion with 95% weight retention. The video below shows a .30 Caliber 180gr lead-free E-Tip power through TWO 12-inch blocks of Ballistics Gel at 100 yards. This was fired from a .308 Winchester.
Watch 180gr eTip Penetration and Expansion in Ballistic Gelatin:
Nosler claims the E-Tip bullet has advantages over other solid copper hunting bullets: “Unlike the competitor’s one-piece designs, Nosler E-Tip bullets will not blow the petals off at extreme velocities nor will the low end expansion ever be questioned, as the minimum impact velocity is set at 1800 fps for standard calibers.” One hunter, posting on Facebook, gave the E-Tip high marks: “I have had the opportunity to take a pig with a 130 gr E-Tip from my .270 and they work flawlessly. My son took two pigs with his .300 Win Mag and 165gr E-Tips and they worked flawlessly as well.”
This video illustrates the design and construction of the Nosler eTip Bullet:
A unique, comprehensive Cartridge Comparison Guide is available as a 340-page, spiral-bound book. Covering over 250 cartridges, the updated Second Edition of the Cartridge Comparision Guide is the product of many years of labor by Andrew Chamberlain, a Utah-based hunter. Andrew says his Guide “compares every factory available cartridge from the 17 calibers up to the 50 caliber cartridges”. (Sorry, most wildcat cartridges are not covered.) Chamberlain’s Guide also compiles cartridge data from major ammunition manufacturers such as Barnes, Federal, Hornady, Norma, Nosler, Remington, Sierra, Swift, Weatherby, and Winchester. It shows the optimal velocity achieved for each bullet weight and calculates bullet energy, recoil, and powder efficiency. Large color photos illustrate handgun and rifle cartridges.
Great Resource for Hunters
Watch Video in High Definition
IMR 4955 Should Be Available Early Next Year
Overall, Gebhardt was very pleased with the SHV: “Optical clarity, image brightness, contrast and resolution were all extremely good.” The tester also liked the MOAR reticle in his scope. He didn’t think it was too “busy” though he thought the hold-over lines would benefit from numbers: “Nightforce’s MOAR was easy to use and provided a clear sight picture for engaging small targets. The line thickness is perfect for both precise shot placement and visibility. My personal preference however would be for the even hash marks to be numbered for the entire lower portion of the reticle.” Gebhart noted that the SHV’s side parallax knob had yardage marking numbers that proved accurate (and handy to use) — most other scopes just have lines.
In this NSSF video, Ryan Cleckner shows how to set up a scope on a hunting or tactical rifle. Ryan, a former U.S. Army Sniper Instructor, notes that many hunters spend a small fortune on equipment, but fail to set up their rifle to use the optics optimally. Cleckner likens this to someone who owns an expensive sports car, but never adjusts the seat or the mirrors.
