Jerry Stiller « Daily Bulletin

teslong borescope digital camera barrel monitor

As an Amazon Associate, this site earns a commission from Amazon sales.

November 8th, 2014

New 2500 Series Rear-Lug Rimfire Actions from Stiller Precision

Stiller’s Precision Firearms is now offering its new line of rear lug, benchrest-grade rimfire actions, the 2500X (single-shot) and the 2500XS (sporter class mag-fed). These actions have already performed superbly in competition (see below). These actions represent the state-of-the-art in rimfire receivers. Top rimfire benchrest shooters are building rifles around the new Stiller actions and the results have been very promising. These actions offer true benchrest-grade manufacturing tolerances plus a superior firing pin system that should allow greater shot-to-shot consistency. Expect fewer unexplained fliers with these Stiller actions compared with older, factory-based actions (such as the Rem 40X).

Stiller 2500X Rimfire Action
Stiller 2500X action rimfire benchrest

The 2500X is Stiller’s new rear lug rimfire benchrest action. This features an Anschutz-style loading ramp, center recoil slot, side bolt release, and a unique shroud/firing pin system for perfect alignment (and more consistent ignition). Unlike many rimfire actions, the 2500X has a trigger hanger for easy trigger maintenance. The 2500X’s body and bolt are crafted from 416R stainless steel with a nitride finish for smooth and trouble-free operation. The outside is OD ground after nitriding for precise tolerances and a distinctive two-tone look.

Stiller 2500SX Rimfire Sporter Action
Stiller 2500X action rimfire benchrest

The 2500XS is a rear lug rimfire benchrest action for the Sporter Class. The “XS” model features a Sako magazine and easy-to-use loading ramp. Like the 2500X, the “XS” has an advanced shroud/firing pin system, plus a trigger hanger for easy trigger maintenance. The bolt and body are nitrided, 416R stainless OD ground for a dimensionally precise, two-tone finish. This lightweight action is specifically designed for IR50/50 sporter class benchrest. It comes with one (1) magazine.

Proof of Performance — 2500X Action Shoots 250-25X
Mike Kuklis’s new rimfire BR rifle built on a Stiller 2500X action delivered an impressive 250-25X in competition last week. Mike drilled this superb 250-25X card at the Tuckertown BR Barn on the way to a 1000-86X match win. Credit J. Miller for the photos from Benchrest Central.

Stiller 2500X action rimfire benchrest

Product Tip from EdLongrange. We welcome reader submissions.

Permalink Gunsmithing, New Product 1 Comment »

January 18th, 2012

SHOT Show Report: New Actions from Stiller Precision

We dropped by the Stiller Precision Firearms SHOT Show booth to see the latest product roll-out from Jerry Stiller and his crew. Jerry showed off some of his hot new action designs, including the long-awaited Copperhead rimfire benchrest action. Along with two rimfire actions, Jerry unveiled his hot-selling P1000 Benchrest Action, and his new TAC30 AW bottom metal system for Rem-clone actions.

The advanced Copperhead rimfire BR action, “in development” for years, is finally a reality. This is a pure benchrest-quality action, built from the ground up to deliver the smallest groups with today’s rimfire ammo. The Copperhead’s innovative design features DUAL firing pins at 6 and 12 o-clock. This serves to make rimfire ignition as consistent as possible. This action also has an Anschutz-style feed ramp to aid feeding of single-shot rounds. Being very complex to manufacture, the Copperhead commands a fairly high pricetag — roughly $1300.00. For those in the highly competitive rimfire benchrest game, who demand the very best rimfire receiver available, the high price is can be justified by the action’s superior performance. Prototypes have already earned top places ijn many notable rimfire BR matches.

Along with the Copperhead, Stiller Precision offers a nicely-detailed, smooth-running 40x clone rimfire action that will fit any stocks inletted for the Remington 40 Rimfire rifles. This 40X Rem clone action is in stock and available know for about $950.00.

Yet another unique action from Stiller Precision is the Tac-30 AW. This is a Rem-footprint action made as a purpose-built tactical rifle foundation. It has beefy #8 screws for scope base attachment along with the ability to add rail pins to a picatinny rail to reduce the possibly of any screw failures. Along with that, it is specifically made to work in concert with Stiller’s detachable magazine bottom metal and Accuracy International AW magazines. The entire action, bottom metal and magazine combination is available for about $1,100.00. The AW magazine is superior to the standard AICS mag; the AW design is easier to load, and it holds ten rounds in a more compact (shorter) box.

Last but not least, Stiller showed us a P1000 action which is becoming more popular in the long range benchrest realm and is available in standard and magnum bolt faces for short and long action calibers. This dual-port action is only available in a right-bolt, left-port, right eject configuration. It is also available in 2 diameters – 1.350” and 1.550” in case weight is an issue. Interestingly, the P1000 is made to work without the standard recoil lug as you can see it has recesses cut in the bottom that will act as a recoil lug surface. Similar to other Stiller’s actions, the P1000 has a small size (0.068″ diameter) firing pin for enchanced accuracy.

Stiller Precision is working hard to catch up on existing orders as well as continuing to develop innovative, state-of-the-art actions for discerning customers. Most of the actions on display at SHOT show are in stock and ready to ship. In addition, Stiller hopes to resume production of his popular Viper and Diamondback actions in just a few months. Jerry cautions “be patient” if you are looking for a drop-port or other classic benchrest not currently in inventory.

Permalink - Videos, Bullets, Brass, Ammo, New Product, Reloading 4 Comments »

October 29th, 2011

New Bottom Metal for DBMs from Stiller Precision Firearms

Stiller Precision Firearms is now offering hard-anodized, billet aluminum bottom metal systems that work with Accuracy International (AI) magazines in Rem-style actions. Currently a short-action version is offered (for both .223 Rem and .308 Win cartridge sizes) and a long-action unit is in the works. Bottom metal for the .223 Rem fits a 10-round magazine. For the .308 Win, there are three mag options: 5-round centerfeed, 10-round centerfeed, and a 10-round, .308 double-column mag. The double-column magazines won’t work in the standard Remington action, but are perfectly suited for dedicated actions such as Stiller’s new TAC30 A/W. Current MSRP for Stiller’s DBM Bottom Metal is $295.00 with one (1) 5-round magazine.

Stiller Bottom Metal DBM

Jerry Stiller consulted many tactical shooters before finalized the design of his new bottom metal. It contains many smart features that enhance reliability/function and simplify the installation process:

Strong, billet aluminum construction with Mil-Spec Type 3 hard anodizing.
Flared magwell allows fast, positive insertion of Accuracy International magazines.
Computer-optimized truss pattern reduces weight while retaining strength and stiffness.
Works with all commonly-available triggers for Rem and Rem-clone actions.
“Exact-Fit” pillars and screws included to ensure a perfect fit and easy installation.
NO SPECIAL INLET is required on the tang ends. Stiller Bottom Metal will fit into a standard BDL bottom inlet in most stocks (must meet Remington specified depths). The only cutting needed is around the magazine box. Stiller has beefed up the material in this area so that a high-precision cut is not needed.

Stiller Bottom Metal DBM