Pynch Podcast — Jon Pynch, NRL National Champ and PRS Ace
What does it take to win in the tactical game? Ask Oregon’s Jon Pynch. He won the 2018 National Rifle League (NRL) 2018 Championship event along with three out of six of the bolt-action PRS matches in which he competed this year. And with 300 points overall this season, Jon has been a #1-rated shooter within the Precision Rifle Series (PRS). In most sports you’d call that an MVP performance.
PRS Competitor Jon Pynch had a superlative run in 2018, scoring victories in many big matches, capped off by winning top honors at the 2018 NRL Championship. And as you read this, this very day (December 2nd) Jon is shooting at the PRS Season Finale at the Triple C Range in Cresson, Texas. Here is Jon Pynch’s 2018 competition record:
2018 National Rifle League Champion
2018 National Rifle League Finale Winner
2018 Rock Lake NRL Match – Jon Pynch – 1st Place
2018 JC Steel High Mountain PRS Match – Jon Pynch – 1st Place
2018 Meaford PRS Match – Jon Pynch – 1st Place
2018 NCPPRC NRL Match – Jon Pynch – 1st Place
2018 Gunwerks PRS Match – Jon Pynch — 1st Place
NRL Champ Jon Pynch was interviewed for the NRL’s Precision Rifle Channel. Click the Red Arrow above to hear a wide-ranging 45-minute audio interview with Jon, with highlights listed below, so you can skip to key sections.
JON PYNCH PODCAST HIGHLIGHTS:
0:00 to 8:45 — 2018 NRL Championship
9:00 – The mental aspect of shooting
16:30 – Jon’s mindset going into a match
20:30 – What gear Jon ran this season
28:20 – Jon’s hunting background
30:55 – The next up-and-comers in the sport
41:20 – Plans and goals for 2019
43:55 – Three (3) under-rated items Jon can’t shoot without
Pynch won 3 out of 6 PRS bolt-action matches he shot in 2018. Pynch runs a landscaping business in Oregon. When time permits, he travels around the country to tactical matches. He grew up around guns, starting with his trusty BB gun, and the passion grew. About 14 years ago, Pynch started to dabble in long-range shooting from the hunting side. In the past few years, he has focused more on competition, observing how the sport has changed: “Over the past couple of years, I’ve noticed it feels like the level of competition and the level of quality products are growing at an incredible rate.”
CLICK HERE for full size image showing gun details.
The MPA BA Competition Chassis has many notable features: RAT System and multi-function Arca Swiss Rail provide a variety of bipod locations. There is a special rotating barricade stop, plus a spigot mount on the front of the fore-end which can extend the “wheelbase” between front and rear support. A clever Weight Tuning System allows competitors to adjust gun balance and reduce felt recoil.
State of the Art PRS/NRL Tactical Rifle:
Above is Jon’s Match Rifle shown from summer 2018 with older barrel chambered for 6mm Dasher. These shots were taken during a fire-forming session. John says: “On right (below) is unfired Lapua 6mmBR round. Shoot it and it turns in the case on the left. 6mm Dasher. 25 formed… 975 to go! Alamo Precision Rifles did a great job on this chamber/barrel. It’s won a few matches and placed well in a few others, but after 1800 rounds I think I’ll use the rest of its life as a practice/fireforming barrel.”
Making Brass — 6mmBR loaded round is fire-formed into 6mm Dasher 40° improved case:
Jon Pynch’s Favored Hardware — Curtis Vector Action, Kahles Scope, MPA Comp Chassis
Like many PRS/NRL competitors, Jon uses the MPA Competition Chassis, the most-utilized chassis in the 2016 and 2017 PRS series. The match rifle above sports a Curtis Custom Vector Action with Proof Research barrel. For optics Jon has recently used a Kahles scope in the rock-solid, MPA BA Mount, the #1 Mount used in the PRS in 2017.
