When you need ammo fast — lots of ammo, it’s hard to beat a progressive reloading press for output. We use progressive presses to load handgun ammo and .223 Rem cartridges for varmint safaris. With good dies, and proper press set-up, today’s progressive presses can produce surprisingly uniform and accurate ammo. No, you won’t see Benchrest Hall-of-Famers loading PPC cartridges on progressives. However, if you need 1000 rounds for your next prairie dog adventure, you should consider getting a progressive. Below you can see a Hornady Lock-N-Load AP configured to load .308 Winchester in bulk.
UltimateReloader.com has published helpful Tips to Optimize Progressive Rifle Loading. No matter whether you have a Red (Hornady), Green (RCBS), or Blue (Dillon) progressive, this article can help you load more efficiently and produce better results. Here are some highlights:
Proper Brass Prep
Just like a good paint job requires good prep work, great rifle ammo requires good brass prep. In order to make sure your rifle loading goes smoothly, make sure to perform the following brass prep steps:
Clean the brass (tumble, ultrasonic, etc.)
Inspect brass for cracks, deep dents, etc.
For military brass: de-prime, ream/swage primer pockets, size with small-base sizer die (small base usually optional).
Measure brass length — if too long, size and then trim.
Final inspection before loading.
Cleaning primer pockets may be something you’ll consider (I don’t clean primer pockets except for rare cases or match ammo).
Smooth and Steady Pace
Since you’re loading rifle ammunition on a progressive, you’re already saving a load of time, so there’s no need to rush things! Attention to detail is super-important for safety and for good results. Always keep an eye on powder level (goes down FAST) and what’s happening at each station.
The Right Press and Press Setup
Look for a heavy-duty, well-built press that will stand up to rifle loading. You’ll also want to make sure your powder measure will have the proper capacity (~25 grains for .223, ~50 grains for 308). If you are bulk reloading, ensure you have enough stations for sizing, charging, powder check, bullet feed, bullet seating, and (optional) bullet crimp.
More Ultimate Reloader Resources for Users of Progressive Presses:
Ultrasonic cleaning machines are great for gun guys. You can clean your brass inside and out, and you can get carbon-coated gun parts (such as AR bolts, muzzle brakes, and muzzle-loader breech plugs) clean as a whistle with no scrubbing. Sound good? Well here’s an opportunity to get a name-brand ultrasonic machine at a discounted price.
Grafs.com Ultrasonic Cleaning Machine Sale
Right now Grafs.com is running a tempting sale on Hornady Ultrasonic Cleaning Machines and accessories. The entry-level Lock-N-Load Sonic Cleaner is marked down from $99.99 to $86.99. The more deluxe Heated L-N-L unit is discounted from $105.99 to $89.99, a 15% savings. This deluxe, 2-liter capacity unit, shown at right, features an 80 watt ceramic heater that enhances cleaning action, particularly for small parts.
The heavy-duty 3-liter L-N-L Magnum Sonic Cleaner with stainless case is now a full 20% off — with the price slashed from $224.99 to $184.99. (Sale price includes shipping after flat $7.95 handling fee). For “power users” who ultrasonically clean large quantities of brass, or regularly clean dirty gun parts, this metal-bodied unit (item #HRN043340) is the smart choice. Its stainless steel housing is durable and easy-to-clean, and the tighter mesh basket allows users to clean smaller parts.
Because it has TWO transducers, the Lock-N-Load Magnum Sonic Cleaner is superior to conventional ultrasonic cleaning machines with just ONE transducer. Moreover, the Lock-N-Load Magnum Sonic Cleaner features an adjustable heating element. This allows the user to dial-in the correct temperature to maximize cleaning efficiency without damaging delicate parts.
Hey folks, here’s a very good deal if you want a combo electronic powder dispenser/scale. The Hornady Lock-N-Load AutoCharge typically retails for around $240 (currently it’s $229.99 at Cabelas and $249.99 at MidwayUSA). Right now, ManVentureOutpost.com has the AutoCharge for just $186.01 (plus shipping). That’s over $50 off typical retail. NOTE: You MUST use Coupon Code SPR2012 during checkout to get that $186.01 price. Act quickly — supplies are limited at that price.
3/5/2012 UPDATE — ManVentureOutpost.com Sold Out of this item, which is now back-ordered. ManVenture is still (apparently) honoring the $186.01 price (with SPR2012 Coupon Code).
Hornady AutoCharge Is Much Less Expensive than RCBS ChargeMaster
That price for the Hornady unit is about $155.00 less than typical pricing for the RCBS Chargemaster (Sinclair sells the Chargemaster for $340.99 plus shipping). For most tasks the Hornady performs quite well. However, RCBS ChargeMaster fans will be quick to note that there has been more accumulated knowledge on tweaking the RCBS machine. But if you want a bargain, consider the “red option” — the Hornady AutoCharge.
This Youtube video shows the Hornady Lock-N-Load AutoCharge in action.
If you want to learn more about the Hornady AutoCharge, there is a detailed review in Shooting.com.au, a popular Aussie gun forum. This product review features actual test results along with lots of sharp, jumbo-sized photos. Here is the summary of the reviewer’s test results: “Weighing [20 charges of a stick powder] on a Redding beam scale (the only other scale I have) showed that 12 were spot on and the remainder we fairly equally split between 0.1 grain under and 0.1 grain over according to this scale. I consider this to be more than adequate for me.”
Grafs.com is having a big sale on certain Hornady reloading products. The Lock N Load Auto Charge Scale/Powder Dispenser is now just $199.99, marked down from $224.99. Reports on this unit have been generally positive. This sale makes the Hornady scale/dispenser much less expensive than an RCBS Chargemaster, which typically sells for about $330.00.
Next, the price of the Hornady Lock N Load Ultrasonic Cleaning Machine has been knocked down to $84.99 from $99.99. That makes the machine cheaper than “no-name” alternatives sold on eBay. This is similar to the machine we used for our original ultrasonic cleaning tests. It should do the job, unless you have large quantities of brass, in which case we recommend the larger Hornady Magnum Sonic Cleaning Machine, which has twin transducers and a larger immersion bay.
Grafs.com has also slashed the price of the Hornady Concentricity Gauge from $94.99 to $79.99. This tool can measure bullet run-out, and it has the capacity to straighten bullet alignment in the neck. Be aware, however, that because this tool supports a cartridge at both ends (like holding the two ends of a jump-rope), you will typically get a different run-out reading than with a traditional tool, such as the Sinclair Concentricity Gauge, which supports the case body only (without touching the bullet tip). Both tool designs give meaningful results, but the read-outs will not normally be the same.
Hornady Reloading Handbook $10.00 with Bullet Purchase
In addition to the tool sales, Grafs.com is now offering the lastest Hornady Reloading Handbook for just $10.00 if you purchase five (5) boxes of in-stock Hornady Bullets. If you could use the book, we recommend Hornady’s V-Max bullets for varmint hunters, and the new BTHP match bullets for target shooters. The new BTHP match bullets feature AMP (Advanced Manufacturing Process) jackets for greater dimensional uniformity.
Grafs.com Ultrasonic Cleaning Machine Sale
Hornady Reloading Handbook $10.00 with Bullet Purchase
