Wood Furniture Transforms Black Rifle — Home DIY Project

The rear stock and grip (shown above) come from the commercial LUCID AR Stock Kit. But Forum member Brian V. custom-made this one-piece walnut forearm.

Forum member Brian V. (aka “Carbide”) wanted a new look for his “modern sporting rifle”. He was tired of looking at black plastic (or FDE, OD green) and aluminum components on his AR15. So he decided to fit wood “furniture” on the rifle. He ordered a wood butt-stock and fore-arm set made by Lucid, but he didn’t like the two-piece fore-arm of the Lucid stock set. He decided he could build something better than the commercially-available, Lucid-made wood fore-arm.

Lathe-Turned Custom Walnut Sleeve in Front
So Brian took his existing AR tubular fore-arm and epoxied a walnut sleeve to it. With a lathe, Brian then turned the walnut sleeve to his desired dimensions: 2.250″ diameter in back and 2.200″ diameter in front, so there’s a little taper. Brian says “I could have gone a little thinner.” The wood fore-end was then sanded and stained to match the Lucid-made rear section. Brian says “the stain is not quite a perfect match, but but it looks a lot better.”

Does Brian like his new wood-stocked AR? Absolutely. He says the conversion makes the gun more user-friendly: “The wood is warmer to carry in winter and quieter.” He adds that the wood sleeve added about four ounces of weight to the fore-end, but that did not affect the handling.

We think this is a good “do-it-yourself” project that could be done by many of our readers. You can simply install the Lucid stock set or customize the front end like Brian did. Either way, you end up with a good-looking rifle that feels better in your hands.

LUCID AR15 Wood Stock Sets Are Sold by Brownells.com: CLICK HERE to ORDER.