Talented shooter Mitchell Fitzpatrick of Applied Ballistics topped a field of over 280 competitors to win the 2023 Nightforce Extreme Long Range (ELR) Steel Challenge in Wyoming last week. The prestigious Nightforce ELR match was held June 9-11 in Glenrock, Wyoming, at the Tillard 55 Ranch. During the three-day match competitors shot 20 different stages with targets placed from 725 yards to 2125 yards. Awards were given for both individuals and teams.
Finishing third overall was Team Vihtavuori member Francis Colon who stated: “Not all challenges are created equal — in this case it was a last minute need for some extra help to run the Applied Ballistics LLC Mobile Lab at the Nightforce ELR Steel Challenge in Wyoming. Normally, I have months of advance notice to prep a rifle, barrels, and ammo for matches. However, in this case, I had less than a week and half to get a new rifle built, broken in, and begin learning to shoot a Barrett MRAD in .300 Norma Magnum[.] ”
Colon explained: “With an average target distance of 1200+ yards and 10-25 mph winds, I was definitely out of my element. But the AB solver on my Kestrel 5700 continued to help me make solid solutions at all ranges. The resulting success — finishing 3rd of more than 280 shooters — [with] my friend Mitchell Fitzpatrick (below) taking first place overall, is truly incredible and humbling.”
Colon observed: “The nerve-racking uncertainty of maintaining first round impacts on 1.5-2MOA targets at distances from 800 to 2200+ yards cannot be captured in words. It was exhilarating and gratifying. Thank you to Nightforce Optics, Barrett… and thank you to SIG SAUER for the Sig Kilo 10K with Applied Ballistics Rangefinding Binos!”
Following the match, Colon commented, “I had less than a week and half to get a new rifle, break it in, and learn to shoot the heavy-recoiling .300 Norma Magnum. I used Lapua .300 NM brass and Berger .30 Cal 215gr Hybrids powered byVihtavuori N565 to create a consistent, high-performance load and it worked exactly as expected. With an average target distance of 1200+ yards and 10-25 mph winds, it was imperative that my powder and projectile be as consistent as possible to make wind calls more successful.”
“This was my first ELR match and the first time shooting this rifle beyond 100 yards. To achieve that level of performance with those hurdles to overcome is testament to the quality of the Vihtavuori, Lapua, and Berger products working together to create an incredible system,” stated Colon, who is a top ranked Precision Rifle Series (PRS) shooter.
Share the post "Mitchell Fitzpatrick Wins Nightforce ELR Steel Challenge in WY"
Kestrel Ballistics will host a live Q&A session with four leading industry professionals at its SHOT Show exhibitor booth #14856. The expert panel session will take place today January 19th from 1:00 to 2:00 pm MST. The 4-man panel includes respected ballistics and shooting experts: Bryan Litz, Mitchell Fitzpatrick, Todd Hodnett, and Colby Hodnett. These four men will take questions from attendees and share their advanced knowledge of ballistics, ELR competition, and all things shooting related.
Bryan Litz earned his Aerospace Engineering degree from Pennsylvania State University in 2002. For the next six years, he worked for the U.S. Air Force on air-to-air missile design and simulation. In 2008, he left the USAF to become Chief Ballistician for Berger Bullets. Bryan then founded Applied Ballistics and has produced numerous articles, books, and videos related to the science of long-range shooting. Bryan also has notable competition credits including winning the 2015 Mid-Range F-TR National Championship. The author of leading books on ballistics and long-range shooting, Bryan is widely considered the leading rifle ballistics expert on the planet.
Mitchell Fitzpatrick is an engineer with Applied Ballistics. Mitch’s shooting accomplishments range from Junior F-TR World Champion in 2013 to winning the 2016 King of 2 Miles ELR shooting competition. He also won the Open Division at the 2019 Nightforce ELR Match. After graduating from Michigan Technological University with a major in Mechanical Engineering and minor in Aerospace Engineering, Mitch joined the Applied Ballistics team in 2014. Mitchell is now a full-time engineer with Applied Ballistics.
Mitchell Fitzpatrick shooting .375 EnABELR in an ELR Competition..
Todd Hodnett, President of Accuracy 1st, is considered one of the most respected and sought-after instructors in the entire world. With 20 years of experience, Todd has traveled the world training soldiers in the art of precision shooting. His determination, knowledge, and vision have guided the development of products to improve the accuracy and function of the sniper and precision shooter.
Colby Hodnett works as a long-range instructor with Accuracy 1st. In addition to being an avid hunter, angler, and outdoor enthusiast, Colby is a Commercial helicopter pilot, certified flight instructor, NRA-certified pistol instructor, and aircraft mechanic. Colby, along with his father Todd, continue to serve the Kestrel community by being a resource for all-things long-range shooting.
Visit the Kestrel Booth Today at 1:00 PM
Don’t miss your shot to talk with these pros! Swing by Booth #14856 January 19th from 1:00 to 2:00 PM. The four-man panel also previously held sessions at the Kestrel Booth on January 17th and 18th. But today is the last opportunity for SHOT Show attendees to hear the panel.
Share the post "Panel of Ballistics Experts at Kestrel SHOT Show Booth Today"
Applied Ballistics has just launched a great, new online resource for shooters: The Science of Accuracy Academy. This subscription-based website is launching with nearly 30 podcast episodes, with many more planned, as well as video content, Zoom classes, and much more.
The main goal of this new online resource is to adapt and modernize the delivery of content coming from Applied Ballistics LLC. In past years, books, DVDs, and seminars were the primary avenues for delivering information. Modern technology has evolved, and the delivery of information can be done in more efficient ways such as streaming videos, podcast discussions of book and seminar content. In addition to being a more modern delivery platform, The Science of Accuracy Academy allows for more frequent updates than traditional books and DVDs.
Bryan Litz, owner of Applied Ballistics LLC tells us: “I’m very excited about this avenue to share what we’re learning in the Applied Ballistics lab. I think many shooters will benefit from the podcasts, which contain very insightful discussions and can be enjoyed in your car, or as you work. We look forward to publishing more of our research thru the Science of Accuracy Academy”.
About the Science of Accuracy Academy Content and Programs
Below, Bryan Litz comments about the Academy’s new podcast offerings and other interactive content. Bryan notes: “We’ve benefited a great deal from practicing the scientific method, and we want to share what we’ve learned.”
Book Content via Podcasts — Many of the podcast episodes are specific reviews of Applied Ballistics book chapters. I’ll sit with Mitch or Francis (both experienced, champion shooters) and discuss the chapter, what it was like to do the tests. We will also discuss behind the scenes problems, as well as what we’ve learned since publishing the books. This lets subscribers get knowledge from the books. And, as a podcast, you can listen while driving, working out, or whatever.
The World of Doppler Radar — In recent years we have spent considerable time visiting shooting matches with the AB Mobile Lab and running Doppler radar. Between that and some of the government contracting work, we’ve built up a lot of experiences and it’s been a long time since a book was published. This Academy is a great outlet for us to update the shooting world on what we’ve been doing and learning.
Ballistics Science and Precision Loading — We’ve been doing hardcore ballistic science for the past few years and have a lot to share. We’ve come to see some aspects of handloading and shooting in a fundamentally different way. For example, understanding the statistical nature of precision has caused us to re-shape how we make decisions in the handloading process. As a result, we now better understand cause-effect relationships and can make deliberate, reliable progress as a result.
Bryan Litz Announces the New Science of Accuracy Academy
The Lighter Side — Bryan told AccurateShooter.com: “Some of the podcast episodes are much less serious! We have fun arguing about which shooting disciplines are harder. For example, Mitch Fitzpatrick and I talk with Francis Colon and Chad Heckler about PRS vs. ELR shooting. We discuss what we like and dislike about the different sports, what we would like to see changed, and what competition shooting has meant for us as individuals. This open-ended format explores long range shooting from the technical to the personal and everything in-between.”
Share the post "Science of Accuracy Academy — New from Applied Ballistics"
Applied Ballistics (AB) has announced the deployment schedule for the Applied Ballistics Mobile Laboratory during the 2022 shooting season. The Applied Ballistics Crew will be driving the Mobile Lab Truck and Trailer to a number of important shooting events in 2022. At these events you can get a Personal Drag Model (PDM) for your rifle/load based on Doppler Radar testing. The first deployment will be at the Bomber Run match in Indiana on February 18, 2022, just two weeks away. Here is the overall 2022 schedule:
The Applied Ballistics Mobile Lab trailer carries a vast array of equipment including computers, sensors, and advanced Doppler Radar equipment. The Doppler Radar is employed to create custom ballistic profiles (aka “Personal Drag Models”) for shooters at major matches.
Personal Drag Models (PDMs) provide shooters with exact, precise ballistics data for their preferred ammo as fired in their match rifles. This is especially important for rimfire ammo which may start supersonic, then go transonic, and finish well subsonic during much of its flight. Bryan Litz explains: “The Doppler Radar system allows us to track the bullet’s velocity as it flies down-range. As the bullet’s velocity decays, that’s what tells you the ballistic coefficient, the drag, and [other factors].”
About the Applied Ballistics Mobile Lab
Q: What is the basic purpose of the Applied Ballistics Mobile Lab?
Mitchell Fitzpatrick: The Mobile Lab allows us to effectively carry out ballistics testing in the field and at events. It has most of the capabilities of our normal lab, but on wheels.
Q: What hardware and electronics are carried in the Mobile Lab? What are its capabilities?
Bryan Litz: The Mobile Lab will transport most everything that’s in the main lab including the Doppler radar. This rig is new and we haven’t fully outfitted it yet. The load-outs will be somewhat flexible depending on the venue we are supporting.
Share the post "Get Personal Drag Models with Applied Ballistics Mobile Lab"
The .375 EnABELR cartridge is slightly shorter than a .375 CheyTac so it allows the round to mag-feed. Applied Ballistics is currently using brass made by Peterson. The .375 EnABELR has achieved impressive velocities — 2990 FPS — with prototype Berger 379-grain solid bullets fired from a 1:7″-twist 30″ barrel. Applied Ballistics may also test 1:8″-twist and 1:9″-twist barrels. READ Bullet Testing Report.
The .375 EnABELR cartridge was designed to offer .375 CheyTac performance in a slightly shorter package: “The problem with the .375 CheyTac is that, when loaded with the highest performance .375 caliber bullets (379-407 gr Berger Solids, and the 400-425 grain Cutting Edge Lazers) the round is not magazine feed-able in any action that’s sized for CheyTac cartridges.
“Knowing the .375 CheyTac produced substantial performance, and that it was just too long for magazine feeding, made it easy to converge on a design for the .375 EnABELR. We just had to make the case short enough to achieve magazine length with the desired bullets, while adding a little more diameter to keep the case capacity similar to the .375 CheyTac. The resulting basic shape is quite similar in proportions to the successful .338 Norma Magnum Cartridge which, interestingly, was selected as the cartridge for General Dynamics Lightweight Medium Machine Gun (LWMMG).”
Here is Mitchell Fitzpatrick, shooting the 375 EnABELR in an ELR Competition.
Share the post ".375 Enabler — Extreme Ammo for Extreme Long Range (ELR)"
The .375 EnABELR cartridge was developed to offer magazine feeding capabilities with the highest-BC solid bullets available. Applied Ballistics observes: “The best magazine is one that retains the cartridge shoulder and doesn’t allow the tip of the bullet to impact the front of the magazine during recoil.” Cadex Defense has designed magazines that fit Cadex’s bottom metal and chassis for the EnABELR line of cartridges which allows for maximum magazine fed performance. These mags are beautifully made, but they will be very EXPENSIVE. Expect to pay about $275 per magazine — what the Cadex 375/408 CheyTac magazine currently costs (Product Code: MAG4300, USD $273.95).
Q: Is this different than Cadex’s regular CheyTac magazine?
A: Mitchell Fitzpatrick of Applied Ballistics Weapons Division replied: “Yes, the ribs that retain the shoulder are moved back to hold the case back and prevent the bullet tip from hitting the front of the magazine. We had been playing with inserts welded into place, which worked great, but dedicated mags directly from Cadex was the ultimate goal.”
Here is Mitchell Fitzpatrick, shooting the .375 EnABELR in an ELR Competition.
“CADEX and Applied Ballistics. Two companies taking ELR seriously and trying to get that last 1-2% of performance out of the system. Keep up the good work!” — Mark N.
The .375 EnABELR Cartridge — Big and Fast
The .375 EnABELR cartridge is slightly shorter than a .375 CheyTac so it allows the round to mag-feed. Applied Ballistics is currently using brass made by Peterson. The .375 EnABELR has achieved impressive velocities — 2990 FPS — with prototype Berger 379-grain solid bullets fired from a 1:7″-twist 30″ barrel. Applied Ballistics may also test 1:8″-twist and 1:9″-twist barrels. READ Bullet Testing Report.
The .375 EnABELR cartridge was designed to offer .375 CheyTac performance in a slightly shorter package: “The problem with the .375 CheyTac is that, when loaded with the highest performance .375 caliber bullets (379-407 gr Berger Solids, and the 400-425 grain Cutting Edge Lazers) the round is not magazine feed-able in any action that’s sized for CheyTac cartridges.
“Knowing the .375 CheyTac produced substantial performance, and that it was just too long for magazine feeding, made it easy to converge on a design for the .375 EnABELR. We just had to make the case short enough to achieve magazine length with the desired bullets, while adding a little more diameter to keep the case capacity similar to the .375 CheyTac. The resulting basic shape is quite similar in proportions to the successful .338 Norma Magnum Cartridge which, interestingly, was selected as the cartridge for General Dynamics Lightweight Medium Machine Gun (LWMMG).”
Share the post "Jumbo $275.00 Magazine for .375 EnABELR Cartridge"
Alpha Unknown, which had two shooters in the match, reported “This was the coolest place we’ve ever shot from… we’ll see you next year.”
Joe Burdick, owner of Rock Solid Shooting Solutions, provides this report from Wyoming: “I’m having a blast at the Nightforce ELR Steel Challenge at the Q Creek Ranch south of Casper, WY. Made my longest hits ever in competition at 1800 and some change. This 300 Winchester Magnum is absolutely PUNISHING the steel. The short targets here are at a thousand yards. I had multiple hits and clean runs on stages with targets from 1200-1800 yards. I missed the longest target of the match (2100 yards) by about 0.2 Mils.”
All photos by Joe Burdick other than as indicated by Alpha Unknown and Mitchell Fitzpatrick.
Target locations are indicated with red dots.
Burdick had high praise for the match and the venue: “This is a super cool match in an incredible location. It is remote but the size and beauty of the venue make it well worth the trip. The range is covered with life-size elk, wolf, ram, antelope, and even kangaroo targets with plenty of circles and squares as well.” The vast Q Creek Ranch encompasses 560,000 acres of scenic Wyoming landscape.
Burdick, whose company Rock Solid Shooting Solutions runs matches and sells custom gun covers, wanted to acknowledge his sponsors and equipment suppliers: Bushnell, Kelbly’s, WildEar, Precision Rifle & Tool, Huber Concepts, The Heritage Flag Company, Armageddon Gear, MasterPiece Arms, Kahntrol Solutions, BEST Targets, and Patriot Cases.
“Incredible location. It is remote but the size and beauty of the venue make it well worth the trip.”
Confirming Elevation Dope Is Essential for ELR Competition
Prior to the match, Joe verified his long-range “dope” at the Q-Creek Ranch shooting at distant targets. Joe reports: “Shooting my 300 Winchester Magnum, I made my longest hit ever with any rifle at 2086 yards.”
The 2086-yard target is marked with the red dot on the photo. The yellow dots represent the location of the 1000, 1409, 1725, and 1816 yard targets for reference.
And the Winners Are…
Chris Gittings and Brent Wood tied for Overall and Hunter Class honors at 115 points with Brent taking the tie-breaker. Notably, Brent’s son Tyler won the Junior Division. With 114 points, Mitchell Fitzpatrick took First Place in Open Division at the Nightforce ELR Steel Challenge. Congrats to all four marksmen on their great shooting! Fitzpatrick works with Applied Ballistics in the AB Weapons Division. He was shooting an AB Weapons Division M30TS rifle chambered for AB’s new .338 EnABELR cartridge, running 300gr Berger Hybrid OTM bullets at 3160 FPS. The scope was a 5-25x56mm NF ATACR with T3 reticle.
The first-ever NRA Extreme Long Range (ELR) Match took place this past week at Camp Atterbury in Indiana. Also labeled the “One-Mile Match”, this inaugural event ran as a side-match between the NRA’s Mid Range and Long Range Championships at Atterbury. The event drew many of the nation’s top marksmen, including multi-time National High Power and LR Champion David Tubb, recent F-TR National Champion Bryan Litz, and 2016 KO2M winner Mitchell Fitzpatrick.
It was a tightly-fought match. Showing exceptional skills (along with great rifles and ultra-accurate ammo), both Corbin Shell and Team Applied Ballistics’ Mitchell Fitzpatrick were perfect for 15 shots — making every shot at 1400, then 1575, and finally 1788 yards (1.016 miles). With the score tied, a 1000-yard target center (bullseye) was set on a target backer at 1988 yards (1.13 miles). Mitchell hit the target, but sadly Corbin had his first miss of the match. With that 1988-yard hit, Mitchell went down in the history books as the first-ever NRA ELR Champion. Winning at Extreme Long Range is nothing new for Mitchell, who was the winner of last year’s King of 2 Miles match in Raton, NM.
Mitchel posted: “We pulled off the win by shooting clean, never missing a shot! It was a great event and I look forward to competing in the coming years. They are trying to extend the facility to make it a 2400-yard match. With the NRA having such a rich competitive shooting history… I am beyond honored to have won the inaugural NRA ELR match. As ELR grows … it will be awesome to look back and know we were in at the ground level. Also, it should be noted that my extractor broke on the second shot at 1788 yards, and I ended up having to fire the last thre shots while extracting my cases with a cleaning rod from the muzzle end…”
Overall Standings NRA ELR One-Mile Match
1. Mitchell Fitzpatrick
2. Corbin Shell
3. Randy Pike
4. Paul Phillips
5. Dan Pohlabel
6. M. White
7. Rusty Phillips
8. Kent Reeve
9. Bryan Litz
10. David Tubb
Corbin’s Big Rig Built for Extreme Long Range
Runner-Up Corbin Shell was shooting his impressive .338 Lapua Magnum Improved barrel-block rifle, originally built for the KO2M event. It performed superbly in Indiana. This rifle was showcased here on AccurateShooter last month. READ Corbin Shell .338 LM Story.
ELR TECH — Confirming Hits at a Mile (and Beyond)
Confirming hits at extreme yardages is a challenge. With a conventional spotting scope you can see a target swinging but it is very difficult to see actual impact at extreme ranges. For this match, wireless remote TV cameras were placed near each of the targets down range. These fed video signals to monitors and tablet computers, allowing scorers to confirm hits on steel. In addition to the Targetvision target cam systems, GSL Technology had a drone to get aerial footage and augment streaming video coverage on Facebook. Sheri Judd, NRA ELR Match Manager, also captured some great still images of the event, including the images you see in this article.
Like Father, Like Son — Rusty and Paul Phillips
The NRA ELR match was a family affair for the Phillips clan. Paul Phillips shot with his father Rusty. The elder Phillips, at the ripe young age of 80, had multiple hits at one mile, earning his official “One Mile Club Certificate”. You can see Rusty shooting in the video below. Paul says: “I had a great day shooting with my dad at the inaugural NRA ELR match. My dad went four for five at 1 mile (1788 yards) on a 36″ plate and earned his One Mile Club membership. This was his first competitive match ever shot at 80 years old and he finished 7th overall! Bryan Litz and myself help keep him centered up.” Paul and his father Rusty used GSL .375 Lethal Mag Copperhead Suppressor and the .338 Lapua Copperhead.
Rusty Phillips, at 80 years, shot 4 for 5 at 1788 yards (1.016 miles) to earn his One Mile Club Certificate. Congratulations Rusty!
Share the post "First-Ever NRA Extreme Long Range One-Mile Match"
There’s a new home on the web for Extreme Long Range (ELR) shooters. Bryan Litz and Applied Ballistics recently launched ELR Central, a new website dedicated to ultra-long-range shooting*. This new site will offer a wide variety of information. Bryan Litz explains: “The most visible element of ELR Central will be a website which will serve to publish and promote all ELR shooting events going on across the country. Although owned and operated by Applied Ballistics, ELR Central will rely heavily on input from the community in order to best serve the sport as a whole.” Along with the ELR Central website, Applied Ballistics has launched a new ELR Central Facebook page.
Content Available on ELR Central
The ELR Central website will eventually offer a comprehensive library of information and activity reports. Bryan and his team plans to build out the website to include all the following:
1. Map of ELR ranges across the USA.
2. List of ELR events with links to the Match Directors’ pages.
3. Technical information and articles for the ELR community.
4. Match results/reports, including equipment lists where available.
5. Analysis of what equipment and shooters are doing well in ELR.
6. Links to other ELR shooting resources such as forums and websites.
On 5/13/17, the Applied Ballistics ELR Team had a successful practice at 3161 Yards (1.8 miles). Bryan Litz reports: “The main goal … was to test how the Berger and Cutting Edge bullets traveled through transonic and subsonic speeds. We all made several hits on target and several within 1 MOA of center.”
Standardized ELR Targets
Another goal of ELR Central is to develop standardized ELR targetry. Bryan explains: “In competitive rifle shooting, standardization of targetry is important. Applied Ballistics, through ELR Central, will provide steel targets to organizations wishing to run ELR matches and/or record-setting events. No one would be required to use these standard targets, we’re simply providing resources to help promote promote some consistency.” The initial standard target, produced by MGM Targets, will be a steel square, 3 feet (36″) per side.
ELR Central is Not A Rule-Making Entity
Bryan was quick to explain that ELR Central is not a governing body, but rather it was created to help advance the sport (and science) of shooting at very long distances, one mile and beyond: “The concept of ELR Central is a result of the ongoing discussions about standardizing ELR matches, records, targets, and more. Although ELR Central will not be enforcing these details, there is a measure of organization which we feel is appropriate, would benefit the sport, and that we are willing to provide. ELR Central is NOT a governing or sanctioning body. We do not have nor seek the authority to dictate how matches are run. For anyone who asks, we can advise on best practices, and what’s generally working, but we’re not here to tell anyone what to do nor how to do it.”
More Information on ELR Competition, per ELR Researcher:
(1) By consensus of the parties involved in the ELR meetings held at SHOT this year, and notwithstanding the names and descriptions of certain “ELR” web sub-forums, “ELR” has been defined as “beyond 1500 yards”.
(2) ELR Central-recognized “ELR” events require that more than one-half of targets must be beyond 1500 yards. Where all criteria are not met an event may be promoted as having “ELR components”.
(3) “ELR Central has published a set of guidelines and standards by which official world records can be established.” CLICK HERE for guidelines/standards.
Story tip from EdLongrange. We welcome reader submissions.
Share the post "New Website for Extreme Long Range — ELR Central"
Applied Ballistics team dominates the King of 2 Miles match: Mitchell Fitzpatrick (1st Place), Bryan Litz (2nd Place), and Paul Phillips (4th Place).
The King of 2 Miles event has come to an end, the scores have been tallied, and Team Applied Ballistics finished first, second, and fourth. That’s dominance. The “Top Gun” was young Mitchell Fitzpatrick, who blitzed the field with his impressive .375 Lethal Precision Arms LLC rifle shooting prototype solid 400gr Berger bullets. Mitchell built this rifle himself using a McMillan A5 Super Mag stock. Remarkably, Mitchell nailed first- and second-shot hits at the 2477-yard target, a full 1.4 miles away. That’s amazing shooting. The photo below illustrates the vast distance from firing line to target.
Mitchell gave credit to his team-mates: “We had the best ballistic solutions possible thanks to the work done at Applied Ballistics LLC by the one and only Bryan Litz. Bryan is also a world-class wind coach and world champion shooter. Paul Phillips, also a world-class wind coach, world champion shooter, and just an all-around class act. Paul was invaluable to making the wind calls we needed to win this match. One of the most important parts of any rifle system is the projectile… Berger’s new prototype .375-cal 400gr projectile we have been developing gave us a monumental ballistic advantage. [It was] without a doubt, a key to our success.”
Berger Ballistician Bryan Litz took second place shooting a .338 Edge (the only .338 rifle in the Finals). Durvin Wick finished third, while Paul Phillips, shooting Bryan’s rifle, placed fourth overall.
Report by Bryan Litz, Team Applied Ballistics
The 2016 King of 2 Miles event is in the books. Today the Top 10 teams engaged targets at 2011 yards, 2477 yards, and 3375 yards. All three Applied Ballistics teams had hits at 2011 yards, and two out of three of us scored first-round hits at 2477 yards! Note that no competitor (from any team) hit the two-mile (3375-yard) target, but that gives us a goal to shoot for next year. Many factors contributed to the success of the Applied Ballistics shooters in this event:
1. Teamwork. We shoot together on the U.S. Rifle Team. The standardized communication protocols between coaches and shooters was a big advantage in this timed event. We had excellent team-work, and are already discussing ways to improve and adapt our approach to ELR events.
2. Science. Applied Ballistics specializes in the science of accuracy. First round hits in this event are scored highly and you can get more first round hits if you know your ballistics. The top two shooters in this event both had first round hits at 2477 yards today which was key, and is not possible without highly accurate ballistic solutions.
3. Ballistic Performance. The performance of Mitchell Fitzpatrick’s .375 Lethal Precision Arms LLC rifle with the prototype 400 grain Berger Bullets solid is unmatched (G7 BC of 0.56 at over 3000 fps). This performance helped Mitch win the match by a sizable margin. The other two Applied Ballistics teams were shooting Bryan Litz’s .338 Edge with the Berger Bullets 300 grain Hybrid. Despite being a smaller caliber (compared to the .375s, .416s, and .50-calibers), the .338 Cal 300 grain Berger Hybrid proved to be a great performer.
There were quite a few big .50 Cals on the line, but a .375 topped the field. Sheri Judd photo.
Thanks to Eduardo Abril De Fontcuberta, Founder of the KO2M Event
We would like to thank all those who worked hard to make this event happen especially Eduardo Abril De Fontcuberta (shown below with Mitchell Fitzpatrick and Paul Phillips). Eduardo has worked hard to organize a great event that pushes the limits of ELR shooting in a fun and competitive way. We’re very grateful for the chance to participate and look forward to competing in the King of 2 Miles event next year. Also, thanks to Kelly McMillan for his support of our team. Kelly has been an awesome sponsor of our efforts here, as well as the U.S. Rifle Team, and the shooting community in general.
Share the post "Applied Ballistics Shooters Dominate King of 2 Miles Finals"
Colon observed: “The nerve-racking uncertainty of maintaining first round impacts on 1.5-2MOA targets at distances from 800 to 2200+ yards cannot be captured in words. It was exhilarating and gratifying. Thank you to Nightforce Optics, Barrett… and thank you to SIG SAUER for the Sig Kilo 10K with Applied Ballistics Rangefinding Binos!”
Colby Hodnett works as a long-range instructor with Accuracy 1st. In addition to being an avid hunter, angler, and outdoor enthusiast, Colby is a Commercial helicopter pilot, certified flight instructor, NRA-certified pistol instructor, and aircraft mechanic. Colby, along with his father Todd, continue to serve the Kestrel community by being a resource for all-things long-range shooting.
The 
Joe Burdick, owner of 
Burdick, whose company 
Standardized ELR Targets
