Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









October 14th, 2020

CCI’s New .22 WMR Clean-22 Ammo with Polymer-Coated Bullets

CCI Maxi-Mag Clean-22 .22 WMR 22WMR ammunition segmented hollowpoint bullet ammo

CCI’s has introduced .22 WMR Maxi-Mag ammo with Clean-22 coating technology. New CCI Maxi-Mag Clean-22 Segmented Hollow Point (SHP) ammo uses an exclusive polymer bullet coating to reduce copper and lead fouling in barrels, without leaving a residue. Shipments of this new product have started.

Editor: We’ve used polymer-coated bullets in larger calibers (.38 Special and .45 ACP), and the coated bullets really do reduce lead fouling in barrels, making barrel cleaning significantly easier.

Segmented Hollow Point (SHP) Bullet for Varminters
The bullet that comes with the new CCI Maxi-Mag Clean-22 ammo should work well for varminters. The 46-grain SHP bullet splits into three equal-size pieces on impact, tripling the number of wound channels. CCI states: “The polymer bullet coating allows this separation at much lower velocities and longer distances than a conventional copper jacket. The bullet’s overall geometry is optimized for accuracy.” Notably, this SHP bullet is currently the industry’s only segmenting hollow-point bullet in .22 WMR.

CCI Product Manager Dan Compton states: “I can’t wait to hear stories and see photos from … customers who use this new [.22 WMR] magnum rimfire round on prairie dog towns, in the squirrel woods, and for their fur-trapping efforts.”

CCI Maxi-Mag Clean-22 .22 WMR 22WMR ammunition segmented hollowpoint bullet ammo

CCI Maxi-Mag Clean-22 .22 WMR Ammo Features:
— Polymer bullet coating reduces lead fouling in the barrel without leaving residue
— Industry’s only segmenting hollow-point bullet in 22 WMR
— Allows expansion at lower velocities than copper-jacketed bullets
— Reduces the risk of penetration through the target and beyond
— Optimized bullet geometry for improved accuracy

CCI Maxi-Mag Clean-22 .22 WMR 22WMR ammunition segmented hollowpoint bullet ammo

More INFO: .22 WMR Maxi Mag Clean-22 SHP, 46gr, 50-count / $18.99 / 972CC

Permalink Bullets, Brass, Ammo, Hunting/Varminting, New Product 1 Comment »
July 5th, 2018

Federal Offers Syntech Polymer-Coated Bullets for Hand-Loaders

Syntech Federal polymer coated coating jacket component bullets handgun pistol

Here’s something that may benefit pistol shooters, especially those who shoot steel and often shoot at indoor ranges. Federal Syntech bullets are now available as reloading components in 9mm, .40 Cal (10mm), and .45 Caliber. These bullets feature a total synthetic jacket (TSJ) polymer coating. The potential for reduced wear and fouling is real — when tested against conventional FMJ ammunition, Federal claims Syntech produced an average of 12% less barrel friction and 14% less heat. By eliminating the conventional bullet jacket, the Syntech design greatly lessens bullet “splashback” when shooting steel. Note, however, Syntech bullets still have a conventional lead core. This means they may not be allowed in ranges with lead restrictions.

Syntech Bullets Tech Information | Syntech Bullets LOAD DATA for 9mm, .40 SW, .45 ACP

Syntech Federal polymer coated coating jacket component bullets handgun pistol

Syntech Bullet Features & Benefits
• Polymer-encapsulated Syntech bullet prevents metal-on-metal contact in the bore.
• Eliminates copper and lead fouling.
• Decreases heat and friction, extending barrel life.
• Significantly reduces the required frequency of cleaning.
• Absence of a copper jacket minimizes splash-back on steel targets.

Part No. / Description / MSRP
AE9SJCB1 / 9mm, .355″ 115-grain Syntech, 100-count / $16.95
AE40SJCB1 / .40 cal., .400″ 165-grain Syntech, 100-count / $18.95
AE45SJCB1 / .45 cal., .451″ 230gr Syntech, 100-count / $21.95

For years this Editor has loaded his .45 ACP and .44 Mag handguns with polymer/moly matrix-coated bullets from Precision Bullets in Texas. Those poly/moly-encased lead bullets shot VERY accurately and I found that my barrels fouled much less than with conventional lead bullets. Likewise, there was much less cylinder fouling on my revolvers. If the American Syntech bullets work as well as those Precision bullets, I think the Syntech line will be a winner. Syntech bullets should benefit any high-volume pistol shooter, particularly competitors who shoot steel.

Permalink Handguns, New Product, Reloading 4 Comments »