Gear Review by Mark LaFevers With its innovative “moving die/static cartridge” design, the new RCBS Summit Press definitely demonstrates “out of the box” thinking. Unlike other presses, the case does not move. Rather, the reloading die comes down to the case. We are happy to report that this unique “upside-down” reloading press works great.
We have tested the new RCBS Summit Press in the workshop and in the field. We’ve now loaded hundreds of rounds with the press. It is smooth, solid, and easy to use. The spent primer ejection/capture system works great (our testers preferred the Summit’s simple, foolproof primer capture to the Rockchucker’s capture system). Most importantly, the Summit produces very straight ammo that gave excellent results on the target in actual matches.
We compared ammo loaded with the Summit with ammo loaded on an RCBS Rockchucker press. The Summit gave up nothing to the bigger press. Cartridge base-to-ogive measurements of Summit-loaded ammo were just as tight as with ammo loaded on the Rockchucker. Run-out, measured with a concentricity gauge, was the same or better (about .002 or less on bullet nose). Most importantly, the Summit loads accurate ammo. In fact, at one match, scores shot with Summit-loaded .284 Win ammo were actually better than scores shot (in the same gun) with ammo loaded on a Rockchucker:
Despite its small footprint, the Summit is very stable — it doesn’t tip, wobble, or rock. The two front mounting bolts hold it firmly in place — the Summit doesn’t need a rear anchor. This, combined with the fact that the Summit has no overhang, makes the new press ideal for a mobile application. For field use (at the range), our tester Mark LaFevers mounted the Summit press on a small platform secured to his trailer hitch (on top of a steel post). This set-up worked great, as you can see in the video below:
Watch Reloading (Sizing/Decapping, Expanding, Bullet Seating) with Summit Press
Photo shows Redding Micrometer Seating Die and .284 Win Cartridge
Mark tells us: “I think the Summit press worked out sweet mounted on the hitch pedestal. The receiver hitch pedestal I made will switch tools between a heavy barrel vise I made and the Summit press. Instead of securing the pedestal with a standard 5/8″ hitch pin, I drilled and tapped for 1/2″-13 bolt to draw the insert up tight against the receiver, eliminating wobble. For charging rounds, I bought 150 plastic test tubes with caps and racks so I can avoid weighing powder charges in the field, unless I want to make changes on the fly.”
The new Summit Press features a rugged cast-iron frame with all-steel linkages. The press is very strong with minimal flex and slop. This allows you to “bump” your case shoulders and seat bullets with great precision and repeatability. The handle can be switched from right to left side (good for southpaws), and the open-front design provides good access, facilitating quick die changes*. The 4.5-inch opening allows you to work with tall cases. Beneath the shell-holder is a spent primer catcher (not shown in photos). The new Summit press has a beefy 2-inch diameter ram, with compound linkages for plenty of leverage. A zerk fitting is included for easy lubrication. The press will accept larger bushings for oversize 1-inch dies.
*To permit his dies to be swapped from Rockchucker to Summit (and back again), with no locking ring adjustments, Mark LaFevers fabricated a new shell-holder base which positions the shell-holder .088″ higher relative to the Summit’s die port. This keeps Summit-mounted dies in the same position relative to the shell-holder as dies mounted in a Rockchucker. So, Mark can swap dies from his Rockchucker to his Summit and maintain exact COAL (when seating) and correct shoulder bump (when sizing). While Mark’s custom shell-holder base lets him swap dies quickly from one press to another, this is NOT a necessary modification. Most folks will simply re-set the locking rings.
Share the post "RCBS Summit Press Works Great in the Shop and in the Field"
Hornady has a handy new product will helps eliminate shadows when you’re working in your reloading area. Hornady’s Lock-N-Load LED light strip places light right where you need it. This is especially useful when using a progressive press. With progressives, you need to watch multiple cartridges in various stages of loading. Good lighting helps you ensure cases aren’t split, powder levels are correct, and bullets are seated straight.
Designed to be affixed to your press, the light strip mounts six (6) long-lasting LED lights in a line. The low-profile light strip has an adhesive backer for easy attachment. Just “peel and stick” to attach the LED strip directly to your press. Watch the video below to see how it’s done.
While Hornady’s light strip was made to be attached to loading presses, this useful device can be affixed anywhere you need extra light on your loading bench or work areas. The strip plugs into any 110 volt outlet, so you never have to replace batteries. The LED strip retails for about $15.00. CLICK HERE for more details.
Product Tip from Boyd Allen. We welcome reader submissions
Share the post "LED Light Strip for Reloading Presses from Hornady"
The new RCBS Summit Press attracted a lot of attention when we first revealed it in the Daily Bulletin earlier this month. Readers wanted to know how well this radical new design really worked. To answer that question, we headed to the RCBS booth at SHOT Show 2013. There our buddy Kent Sakamoto gave us complete run-down on the new Summit. With the Summit, unlike other presses, the case does not move. As you can see in the video, the reloading die comes DOWN to the case.
The Summit’s open-front design is definitely a plus, and we really like the fact that all press operations take place ABOVE the benchtop. There are no linkages running below the bench, which lets you use the Summit on a bench with cabinet-style drawers. The Summit press is definitely beefy. With its massive center column, the design operates smoothly with no flexing issues. RCBS says the Summit has no more head flex than the classic “O”-design RockChucker.
The new Summit Press features a rugged cast-iron frame with all-steel linkages. The handle can be switched from right to left side (good for southpaws), and the open-front design provides good access, facilitating quick die changes. The 4.5-inch opening allows you to work with tall cases. Beneath the shell-holder is a spent primer catcher. The press will accept larger bushings for oversize 1-inch dies. Street Price in the new Summit Press is about $220.00 (optional Short Handle is another $19.95).
RCBS Summit Press Features:
• Bench-top operation
• Massive 2-inch diameter ram
• Ambidextrous handle
• Compound leverage
• 4.50-inch operating window
• Spent primer catcher
• Full frontal access
• Accepts bushings for 1″ die bodies
• Press adapter bushing
• Zerk lubrication fitting
• Made in USA
Share the post "SHOT Show Report: New RCBS Summit Single-Stage Press"
Sinclair International regularly publishes Reloading Advice and Tech Tips in the Sinclair Reloading Press Blog. Mr. Bob Blaine, Sinclair Reloading Tech, has asked Sinclair’s customers to suggest ideas for future technical articles. Here’s your chance to pose questions to be answered and topics to be covered.
Suggestions Wanted by Sinclair Int’l:
As most of you have noticed, [Sinclair has] brought out some interesting items in our recent Sinclair Summer Catalog. Introducing new products generally causes a lot of questions, and we really do enjoy answering them for you. One of our upcoming articles will be about the new Stainless Steel Tumbling Media. We will explain how to best use the new tumbling media, and will include pictures to help show you how to work with it.
I want to know what other new products you would like us to showcase in future Reloading Press articles. We do enjoy hearing from all of you, and this is your chance to let us know what articles you would like to see from our Sinclair Reloading Tech Staff. We look forward to hearing from you! — Bob Blaine
If you’re looking for a solid, beautifully fabricated loading press that can do double-duty at home AND at the range, consider the Combo Press from Harrell’s Precision, run by brothers Lynwood and Walter Harrell. Though it is very compact, it has plenty of leverage to full-length-size cases. The Harrell’s Combo Press works BOTH as an arbor press and as a standard press that functions with shell-holder and conventional screw-in dies. The arbor section on the left is tall enough to hold a Wilson micrometer-top seater. The threaded die section on the right has enough clearance for .308-sized cases.
One of the best features of the Combo Press from Harrell’s Precision is its sturdy clamp. This mounts solidly to a wood loading bench or table top. It also has enough vertical clearance between the jaws to work with most range benches. Forum member Boyd Allen has written a detailed review of the Harrell’s press, with additional photos by Paal Erik Jensen of Norway. The Harrell’s Precision Combo press retails for $295.00. That’s pretty pricey, but consider that it can replace BOTH an arbor press and a standard press. CLICK HERE to read full COMBO PRESS REVIEW
Combo Press Has Plenty of Power to Bump Shoulders
This Editor has loaded ammo with this press and I can say it performed well. It actually bumped shoulders on fired 6BR brass more easily than a larger cast-iron press we have in our loading area. I attribute that to the fact that the threads for the die are very precise and the shell-holder seats firmly on the ram, with no slip. Seating with a hand die (on the left side of the press) yields repeatable results, although I have to say I get better “feel” with a good Arbor press, such as those made by 21st Century, K&M, or Sinclair Int’l. I also like the availability of the seating Force Gauge on the K&M Arbor.
Share the post "Gear Review: Compact Combo Press from the Harrell Brothers"
MidwayUSA has the Lee Classic Cast Iron “O” press (item 317-831) on sale now through the end of July. Priced at $77.29 (marked down from $82.99), this is an outstanding single-stage press for the money. It performs as well or better than some presses costing twice as much. If you don’t believe us… read the dozens of positive reviews from Lee Classic Cast Press owners.
Modern precision machining ensures a precise fit of the ram so it moves smoothly. There is plenty of leverage, and the handle can be moved from left side to right side. One really cool feature is that spent primers eject straight down through the center of the ram, exiting through a tube.
Save an Extra $10 off Order of $50.00 or More
If the price reduction for the Lee Class Cast Press isn’t enough of an incentive, MidwayUSA is offering an exclusive promotion for AccurateShooter.com readers this July. To save an additional ten bucks on your order of $50 or more, use PROMO CODE 2437210 during check-out. This promo expires 7/31/2010.
Share the post "Lee Classic Cast Press on Sale, Plus MidwayUSA $10 Off Promo"
Credit this find to ace British benchrest shooter Vince Bottomley, United Kingdom 1K record-holder and publisher of the excellent Precision Rifle website.
Vince writes: “This beautiful compact press is made by an Italian company, BCM Europearms, run by Vittorio Taveggia. Vittorio builds some superb rifles but he also has a very useful range of accessories for accuracy aficionados. I’m sure you’ll be interested in Vittorio’s loading press — this is offered in several configurations for normal dies, Wilson-style hand-dies, or both. The press is superbly made. Vittorio also crafts very nice Weaver-style rings and bases. Again they are beautifully-finished and very strong. Vittorio also makes stocks and actions. At present, there is no UK importer for the press, but there could be very soon. If you are at all interested in any of the products please drop me an e-mail at vinceb [at] 6ppc.fsnet.co.uk and I’ll pass your interest onto the ‘soon to be’ UK importer.” The top photo shows the original Modulo Masterpiece version, which had three stations. There are other versions, as seen in the photo below.
Editor’s note: We don’t know of a US importer, but you can contact Vittorio directly. Information for his company in Torino, Italy is found on the BCM Europearms website. Send email to: info [at] info@bcmeuropearms.it.
With its innovative “moving die/static cartridge” design, the new RCBS Summit Press definitely demonstrates “out of the box” thinking. Unlike other presses, the case does not move. Rather, the reloading die comes down to the case. We are happy to report that this unique “upside-down” reloading press works great. 
The new Summit Press features a rugged cast-iron frame with all-steel linkages. The press is very strong with minimal flex and slop. This allows you to “bump” your case shoulders and seat bullets with great precision and repeatability. The handle can be switched from right to left side (good for southpaws), and the open-front design provides good access, facilitating quick die changes*. The 4.5-inch opening allows you to work with tall cases. Beneath the shell-holder is a spent primer catcher (not shown in photos). The new Summit press has a beefy 2-inch diameter ram, with compound linkages for plenty of leverage. A zerk fitting is included for easy lubrication. The press will accept larger bushings for oversize 1-inch dies.
As most of you have noticed, [Sinclair has] brought out some interesting items in our recent Sinclair Summer Catalog. Introducing new products generally causes a lot of questions, and we really do enjoy answering them for you. One of our upcoming articles will be about the new Stainless Steel Tumbling Media. We will explain how to best use the new tumbling media, and will include pictures to help show you how to work with it.
Combo Press Has Plenty of Power to Bump Shoulders
