Here is what high-end hunters have been requesting for years — an ultra-lightweight mag-fed action with Benchrest-grade smoothness, engineering, and craftsmanship. BAT Machine has just introduced two impressive new aluminum/steel hybrid repeater actions — the Bumblebee (short action) and the Vampire (long action). These are REALLY light. BAT states 23.8 ounces for the Bumblebee, and Alex Wheeler reports the Vampire is 25.3 ounces. So you get titanium-class weight savings without the titanium hassles.
Both the Bumblebee ($1699 MSRP) and the Vampire ($1765 MSRP) are aluminum/steel designs with integral recoil lugs and +20 MOA Picatinny rail segments. Though they are flat-bottom actions, both are designed to fit most Remington 700-pattern stocks. Gunsmith Alex Wheeler says: “This action shape should be very stable in the bedding — you just need to square up the inlet.”
Both the Vampire and Bumblebee actions feature a modular bolt. BAT does the modular bolt differently than anyone else, and very cleverly. This design allows easier bolt face changes and spring changes. Internal maintenance is also easier. Bat bolts also run super smoothly. Alex Wheeler reports “the Vampire action is very smooth — it feels just like BAT’s all-steel actions.”
Vampire action photos courtesy WheelerAccuracy.com. The Vampire fits a 4″-long CFE-09 magazine box.
Alex Wheeler got one of the first Vampire actions, and he was impressed. This is a long-action repeater, with standard or Magnum bolt. Alex says the mating of steel and aluminum was superb: “I have checked it for straightness and lug contact. It’s very good. I’m impressed with how straight they got this insert.”
Bumblebee Action — State-of-the-Art Lightweight Hunting Action
If you are seeking a very lightweight action with Benchrest-quality smoothness and precision fit/finish, consider the Bumblebee. Weighing under 24 ounces, this new Bumblebee short action may be perfect for hunters, varminters, and tactical shooters who desire a light weight, premium quality action. The new Bumblebee is designed to use 700 Short Action bottom metal. Combining steel and aluminum, the Bumblebee combines 4140 Chromoly Steel and 7076-T6 Aluminum to achieve strength and rigidity at a weight rivaling titanium. According to BAT, the Bumblebee’s advance design makes it “31%-42% stiffer than light weight steel actions and over 130% stiffer than round Titanium actions.”
Bumblebee Action Features and Specifications:
— Action weight is 23.8 oz. as configured in photos (11.4 oz. lighter than BAT VR/TR actions)
— Weight comparable to Titanium actions after including Picatinny rails, recoil lugs, and fasteners
— 31%-42% stiffer than lightweight steel actions and over 130% stiffer than round Titanium actions
— Action body made with aircraft-grade billet 7075-T6 Aluminum and hardened 4140 Chromoly Steel
— Integral +20 MOA Picatinny two-section rail standard
— Modular bolt for lower cost bolt face changes
— .070″ firing pin diameter for maximum accuracy and reliable ignition
— Standard medium aluminum bolt knob, 5/16-24 thread
— LiFe Melonite-treated firing pin, bolt and shroud for smooth bolt movement and low maintenance
— Extended extraction cam for smooth bolt opening
— Uses Remington 700 SA trigger components and bottom metal
— Right-hand and left-hand versions
— Barrel tenon is 1.062 x 18 tpi (CLICK HERE for blueprint)
Product tip from EdLongRange. We welcome reader submissions.
A while back, RifleShooter online magazine published a list of the purported Ten Best Bolt-Action Rifles of All Time. Ten classic rifle designs (including the Remington 700, Winchester Model 70, Weatherby V, and Mauser 98) were featured with a paragraph or two explaining their notable features.
“Best” Lists Stir Controversy…
These Top 10 lists are always controversial. While most readers might approve of half the entries, there are always some items on the Top 10 list that some readers would challenge. Here is RifleShooter’s Top 10 list. What do you think? Are there some other bolt-actions that are more deserving?
1. Springfield M1903
2. Mauser 98
3. Winchester Model 70
4. Remington Model 700
5. Weatherby V
6. Sako L61/AV
7. Savage Model 110
8. Ruger M77
9. Tikka T3
10. Mannlicher-Schonauer
Turn a Rough Factory Rifle into an Accurate Hunting Rig
Kiwi Nathan Foster has produced a good video for hunters with “under-performing” Remington Model 700 rifles. In this video, Nathan helps a client turn a badly-behaving Rem 700 into a reliable tack-driver. A customer had sent Nathan this rifle to rectify stubborn copper fouling. After bedding the rifle, the customer discovered that the rifle produced terrible groups due to the stubborn bore.
Nathan told us: “This was a grand opportunity to study what can go wrong with the M700 rifle with regards to both do-it-yourself work and flaws within rifle production. To help structure the video, we used the chapters of our Accurizing Book as reference steps for the video. This footage also works in conjunction with our free Remington bedding tutorials on YouTube.
Those who have watched the full M700 Troubleshooting video say this is one of the most helpful videos yet released on problem-solving with a factory hunting rifle. This video is especially helpful for those just getting into the accuracy game, as it walks the viewer through the basics of rifle tuning, then proceeds to more advanced methods of improving a badly-behaving rifle.
This video focuses on the Remington M700 and Rem clones, such as the Bergara rifle. However the lessons and techniques in the video can apply to any type of bolt-action rifle suffering heavy copper fouling. The video features detailed footage of barrel break-in and barrel-lapping procedures. These procedures may be beneficial for rough factory barrels. IMPORTANT! AccurateShooter.com recommends different break-in and maintenance regimes for custom, hand-lapped premium barrels — be conservative with fine custom barrels. Our best custom barrels have all shot superbly with minimal break-in and zero use of abrasives during break-in.
Troubleshooting the Remington 700 Rifle with Nathan Foster
NOTE: This is a free 70-second trailer video. The FULL Remington Troubleshooting Video is 1 hour, 16 minutes long and can be streamed through Vimeo-on-Demand for $12.00. Access Full Video HERE.
Nathan Foster of Terminal Ballistics Research in New Zealand, is a expert hunter and highly-respected author of a series of hunting and long range shooting books. Nathan’s first book, The Practical Guide to Long Range Hunting Rifles, is a classic — one of the best treatises ever written on choosing and using a hunting rifle.
The Remington 700 is the most popular bolt-action rifle in America, according to Gunbroker.com sales figures for new and “previously-owned” rifles. So, chances are that you (or a family member) have a Rem 700 of some vintage sitting in the gunsafe. Click the link above for a PDF version of the Remington 700 Owner’s Manual (also covers models Seven, and 673).
Remington is offering some attractive Rifle Rebates for the remainder of the year. Get $75 back on many of Remington’s most popular Model 700 rifles, or $50 on the Rem 700 SPS. This offer is good for Remington rifles purchased now through the end of 2019. To get your rebate, submit original Sales Receipt and Proof of Purchase Sticker with Rebate Form. There is also an Online Registration but receipts and proof of purchase must still be submitted by mail. For more information visit Remington.com/rebates-promotions.
2019 Remington Big Game Promotion — Offer #89342
This offer runs from 09/17/2019 until 12/31/2019. (End date is 01/10/2020 for California and Washington residents to accommodate ATF compliance checks.) Submissions must be postmarked by 01/31/2020. The following items must be submitted by mail qualify for this offer:
1. Completed Registration Form | CLICK HERE for Form (Scroll to Page 2)
2. Original sales receipt showing the eligible product(s) purchased.
3. Original UPC code showing the eligible product(s) purchased.
Mail the completed Registration Form with all applicable original cash register receipts and original proof of purchase sticker(s)/UPC(s) to:
PROMOTION #89342
REMINGTON BIG GAME PROMOTION 2019 – US
P.O. BOX 22177
TEMPE, AZ 85285-2177
You may have heard the phrase “blueprinting an action”, but do you know what that really means? Do you know what operations are done to an action during the blueprinting process? To help you understand, gunsmith Bill Marr of RifleShooter.com has created a helpful article showing a Rem 700 blueprinting job start to finish. This article spotlights how the procedures can be done with manual tools. Bill, who runs 782 Custom Gunworks Ltd., can also perform many of these operations with modern automated machinery. In fact, Bill has written a follow-up article on Truing a Rem 700 receiver with a Lathe.
Bill explains: “Blue-printing, or truing a rifle action, ensures the receiver face, threads, lugs, bolt lugs, and bolt face are square to the center line of the receiver.” In Bill’s informative article, Bill shows how he blueprints a Remington 700 short action receiver with .308 Win bolt face. He covers the following procedures step by step:
Action Disassembly
Ream Minor Diameter of Receiver Threads
Square the Receiver Lugs
Square the Face of the Receiver
Lap the Bolt Lugs
Square the Bolt Face
We use the bushings to guide the receiver tap. This chases the threads and ensures they are square.
2. Truing the Receiver Face
Using the receiver facing tool, the front of the receiver is trued. The tool is placed over the tap and turned by hand. We used Do Drill to lubricate it.
3. Lapping the Lugs
The bolt lapping tool screws into the front of the action and applies rearward pressure on the bolt face. A little bit of lapping compound is placed on the front of the receiver lugs. The bolt handle is then raised and lowered repeatedly. Note — it is critical that we do not get any lapping compound on any other surfaces.
4. Truing the Bolt Face
On this bolt, the central part of the bolt face was low. After the truing operation, this Rem 700 bolt face is now completely square to the action.
IMPORTANT: Rifleshooter.com states: “This article highlights our project and is presented for information purposes only. This provides an overview of the process and should not be attempted without the guidance and supervision of an experienced gunsmith“.
Ever wish you could look inside your rifle, to see how the trigger and fire-control system work? Well now that is possible with the magic of 3D computer graphics. Modern software allows detailed “cutaway” side-views (see below), as well as 3D views with 360° rotation. The software can also provide X-Ray-type views into the gun’s internals — as you can see above. And computer animation can show the complete firing process from trigger pull to chambering of the next round.
Rem 700 Cutaway View from Right Side
This article covers two different animations — a bolt-action, and a self-loading “gas gun”. The first video features the popular Rem 700 action, probably the most successful American bolt-action ever created. The second video offers a lengthy exploration of the AR15/M16 platform.
READERS — Take the time to watch these videos! The Rem 700 animation is really outstanding! EVERY bolt-action shooter should watch this video all the way through.
Cutaway 3D Animation of Rem 700 Action — Watch Video
The Model 700 series of bolt-action rifles have been manufactured by Remington Arms since 1962. All are based on basically the same centerfire bolt action. They are typically sold with an internal magazine depending on caliber, some of which have a floor-plate for quick-unloading, and some of which are “blind” (no floor-plate). The rifle can also be ordered with a detachable box magazine. The Model 700 is a development of the Remington 721 and 722 series of rifles, which were introduced in 1948.
The Rem 700 is a manually-operated bolt action with forward, dual opposed lugs. It features “Cock On Opening”, meaning the upward rotation of the bolt when the rifle is opened cocks the firing pin. A cam mechanism pushes the firing pin’s cocking piece backward. The bolt face is recessed, fully enclosing the base of the cartridge. The extractor is a C-clip sitting within the bolt face. The ejector is a plunger on the bolt face actuated by a coil spring. The bolt is of 3-piece construction, brazed together (head, body. and bolt handle). The receiver is milled from round cross-section steel.
This video was made with the help of the World of Guns: Gun Disassembly interactive encyclopedia with 3D rendering. This remarkable web-based software allows users to view the inner workings of hundreds of different rifles and pistols — everything from a .22 LR Ruger to a .55-caliber Boys Anti-Tank rifle. There are also 25,000+ parts diagrams. This is a remarkable technical resource. SEE MORE HERE.
Cutaway 3D Animation of AR15/M16 Action — Watch Video
The AR platform rifles are a semi-automatic version of the M16. These feature distinctive upper and lower receivers which can be readily separated via front and rear pins. The upper includes the barrel, handguard, forward gas tube, and bolt assembly, while the lower contains grip, trigger group, fire selector, and mag well. In addition the lower is attached to the stock which encloses the buffer assembly.
The original ArmaLite AR-15 was a select-fire, air-cooled, gas-operated, magazine-fed rifle designed by American gun manufacturer ArmaLite in 1956. It was based on Armalite’s AR-10 rifle chambered for the 7.62×51 NATO (.308 Win). In 1959, ArmaLite sold its rights to the AR-10 and AR-15 to Colt. Some key modifications were made — most notably, the charging handle was re-located from under the carrying handle to the rear of the receiver. The redesigned rifle was adopted by the U.S. military as the M16 carbine, which went into production in March 1964.
These videos found by Boyd Allen. We welcome reader submissions.
If you’re shopping for a new varmint or hunting rifle this summer, Remington wants your business. Right now Remington is offering $75 Cash Back on all Model 700 Varmint rifles purchased from May 1st through the end of July, 2019. Many different configurations are available. For example you can choose either a synthetic stock or a wood laminated stock.
NOTE: This Rebate Offer is valid on Rem 700 Varmint rifle purchases made from 5/1/19 through 7/31/19. All requests must be postmarked by 8/31/19. Important — Firearms Consumer Rebates are MAIL-IN ONLY. You MUST include your original cash register receipt AND the barcode from your owners manual (no exceptions). CLICK HERE for REBATE FORM (PDF).
NOTE: Remington is also offering $75 Cash Back on all Remington 1911 R1 handguns. The terms of this 1911 Pistol Rebate is similar to the Varmint Rifle Rebate — Purchase from 5/1/19 through 7/31/19, and submit Pistol Rebate Form by mail.
Are you feelin’ lucky? Then enter the latest EuroOptic Rifle Give-Away Contest. At the end of May 2019, EuroOptic will give away a New 6.5 Creedmoor Remington 700 SPS Barreled Action in a Magpul Hunter Stock (value $969.00). The Prize Rifle comes complete with a Steiner Optics H4Xi 4-16x56mm Scope (value $1174.99). Total Prize value is $2143.99!
6.5 Creedmoor Barreled Action with Magpul Hunter Stock
The Remington 700 SPS 6.5 Creedmoor Barreled Action with Magpul Hunter ODG Stock Kit is a rugged rifle designed for both hunters and precision shooters alike. The classic Rem 700 action paired with this heavy threaded barrel can deliver impressive accuracy with the 6.5 Creedmoor cartridge. The Magpul Hunter Stock offers good ergonomics and functionality while keeping the weight down. SEE Rifle Details HERE.
Steiner H4Xi 4-16×56 LRS Scope
The Steiner H4Xi 4-16x56mm riflescope is a good choice for long-range target shooting and challenging hunting scenarios. The illuminated Steiner Plex-S1 reticle features ballistic lines and crosswind markers for long range accuracy under pressure. The H4Xi’s large objective diameter and superb optical glass present a bright and clear sight picture in most lighting conditions.
The Remington 700 is the most popular bolt-action rifle in America, at least according to Gunbroker.com sales figures for new and “previously-owned” rifles. So, chances are that you (or a close family member) may have a Rem 700 of some vintage sitting in the gunsafe. But do you have a copy of the official Remington 700 product manual in digital PDF format? Probably not.
To get you squared away, CLICK HERE for a PDF version of an official Remington 700 Owner’s Manual (also covers models Seven, and 673). CLICK HERE for the complete Remington Owner’s Manuals Archive.
Perhaps you own other Remington firearms as well. Here are links for other Remington Manuals. For each model, click the link and the manual should appear in your download folder as a PDF file. If that doesn’t work, then Right Click and “Save As” to Download.
Barrel nut system allows “Pre-Fit” barrel installation on a Remington action. CLICK photo to zoom.
REMAGE Project Report by Bill, Rifleshooter.com Editor
Installing a new barrel on your Remington 700 (especially without a lathe) may seem like a daunting task, but thanks to companies like McGowen Precision Barrels, there are easier alternatives. By adopting a Savage-style barrel nut on a 1 1/16″ thread for a Remington 700 receiver, pre-chambered (aka “pre-fit”) barrels can be easily swapped with just a few hand tools. This system is sometimes called a REMAGE conversion (for “REMington savAGE”). With simple tools a “Pre-fit” 6mmBR-chambered barrel was installed on the author’s Remington action — no machining or lathe-work required.
The existing barrel is simply removed from the action (normally the hardest part) and the new barrel is screwed on with the Go Gauge in place. After headspace is verified with the Go Gauge, the barrel nut is tightened against the action and you are off to the range. It takes all of the machine work out of the barreling process.
Note: Because barrel nut has a slightly larger diameter, some stocks may require minor inletting. Also, if you are shooting fired brass from another rifle with the same chambering, you should FL-size the brass before loading it for your new pre-fit barrel. And always check the set-up with a dummy round loaded to normal cartridge length BEFORE you head to the range. With Pre-Fits, the freebore should be adequate for your cartridge, but always check and adjust your seating depth as needed.
Bill has been a serious shooter for over 20 years. A former Marine Corps Sergeant, he’s competed and placed in High Power Rifle, ISPC, USPSA, IDPA, 3-Gun, F-Class, and precision rifle disciplines. In addition to being an NRA-certified firearms instructor and range officer, Bill has hunted big game in North America, South America, and Africa. Bill writes extensively about gunsmithing, precision rifles, and the shooting sports on his blog, Rifleshooter.com.
This video was made with the help of the 
