|
|
March 20th, 2012
 The Sporting Arms and Ammunition Manufacturers’ Institute (SAAMI) issued the following statement:
SAMMI, a registered United Nations non-governmental organization (NGO) with roster status, has taken the regrettable but necessary step of withdrawing any reference of SAAMI association from the U.N. agency project to create “International Small Arms Control Standards (ISACS).”
The goal of ISACS, as stated on the U.N. website is “To develop internationally accepted and validated standards that provide clear and comprehensive guidance to practitioners and policy-makers on small arms and light weapons control.”
SAAMI, being an accredited standards-setting organization, welcomed the opportunity to be part of a standards-setting process which requires rigorous adherence to facts.
“We saw the ISACS as a way to cut through the politics and rhetoric of this issue and get down to core actions that will reduce violence,” says Rick Patterson, Managing Director of SAAMI. “Regrettably, the process has been tainted, expert input has been ignored, and the resulting standards represent nothing more than the opinions of the authors — most of whom are affiliated with NGO’s supporting gun control.”
Because the U.N. has ignored contrary facts and opinions, and quelled debate, the U.N. has done itself — and everyone associated with ISACS — a disservice. They have negatively affected the credibility of all parties involved. For these reasons, SAAMI simply cannot allow its reputation for professionalism, integrity and factual expertise to be associated with the ISACS program.
SAMMI has also issued a lengthy “Minority Report in response to Draft International Small Arms Control Standards Promulgated by the U.N. Coordinating Action in Small Arms (CASA)”. This Minority Report is highly critical of the processes leading to the proposed United Nations International Small Arms Control Standards (ISACS). SAAMI’s Minority Report notes that there was a “refusal to consider opposing views” and an “editorial bias during the drafting process.” CLICK HERE to read full SAAMI Minority Report.
December 4th, 2011
SAAMI, the Sporting Arms and Ammunition Manufacturers’ Institute, is an association of the nation’s leading manufacturers of firearms, ammunition and components. Founded in 1926, SAAMI promulgates industry standards for firearms ammunition safety, interchangeability, reliability and quality.
New SAAMI Website Offers Free, Printable Cartridge Diagrams
SAAMI recently rolled out a new website loaded with invaluable info for shooters. From the new SAAMI site you can access hundreds of FREE official cartridge diagrams and chamber drawings for all ammo types: Rimfire, Pistol Cartridges, Rifle Cartridges, and Shotshells. Are you looking for the official 17 HMR diagram, or 6.5 Creedmoor, or 7mm Winchester Short Magnum? You’ll find them all, along with hundreds more, on the SAAMI site. Said Rick Patterson, SAAMI’s managing director. “This redesigned website will help provide greater visibility and understanding of SAAMI’s important work.”
Please Read These Instructions Carefully
To access the cartridge diagrams, go to SAAMI’s Technical Information webpage, and CLICK ON Cartridge and Chamber Drawings to reveal categories. You will find links to 20 new and/or updated cartridges there.
To find the full set of cartridge diagrams, you need to click on the link to Current Cartridge & Chamber Drawing documents — American National Standards Published by SAAMI. There you will find links to four categories of diagrams: Rimfire, Shotshell, Centerfire Pistol/Revolver, and Centerfire Rifle. These links will launch large PDF files that have diagrams of the cartridge types. NOTE: These are very large PDF documents. For example, the Centerfire Pistol/Revolver PDF is 189 pages long. You must scroll down to see the cartridge type you want.
Unfortunately, the organization of the SAAMI site is much less convenient than before. Previously you could access a page and then simply click on a link for the cartridge you wanted to view. Below is a sample of the first page of the previous Rifle Cartridge Diagram List.
Red arrows show you where to click, after you launched the page under the old website.
SAAMI Standards Documents With Additional Info
You can also click the subcategory links under SAAMI/ANSI Standards to see multiple diagrams in a larger PDF file. You may have to click the SAAMI/ANSI standards line first to display the four sub-categories: Pistol/Revolver, Centerfire Rifle, Rimfire, and Shotshell.
Credit Boyd Allen for finding SAAMI’s Cartridge Diagram PDF Archive.
.
October 31st, 2011
At the gun industry writers round-table meeting earlier this month in Kansas City, KS, Alexander Arms made important announcements regarding the 6.5 Grendel Cartridge.
1. The “6.5 Grendel” has been officially approved as a SAAMI Cartridge. (This means that cartridge dimensions will be standardized for the purpose of manufacturing brass, loaded ammunition, pre-fit barrels, and 6.5 Grendel-chambered firearms.)
2. Alexander Arms has officially “relinquished” its trademark claim on the term/label “6.5 Grendel”. This opens the door to other companies offering products (such as ammo, barrels, magazines) which are identified by the 6.5 Grendel moniker.
CLICK HERE for 6.5 Grendel Cartridge History (Wikipedia entry).
Here is the text of Alexander Arms’ Official Press Release:
The 6.5 Grendel is an Official SAAMI Cartridge and Trademark is Relinquished.
The Sporting Arms and Ammunition Manufacturers’ Institute (SAAMI) has adopted the 6.5 Grendel as an official SAAMI cartridge. As a result of the cartridge’s official recognition, Alexander Arms will relinquish the trademark “6.5 Grendel”. Bill Alexander states: “One of the primary purposes of trademarking the name was to protect the integrity of the design. With the adoption of the 6.5 Grendel cartridge standard by SAAMI, the design is now protected, and any confusion in the marketplace as to the specification of the cartridge has been eliminated.”
SAAMI’s formal adoption of the design specifications for the cartridge has led Alexander Arms to announce that it will relinquish its federally-registered trademark and that “6.5 Grendel” to be the common commercial name for a cartridge that adheres to the specifications adopted by SAAMI.
Alexander Arms is proud that a cartridge of its design has received this important designation, and is pleased to take this important step in the continued market development of this breakthrough cartridge, which is perfectly matched to the AR-15 platform.
For additional information contact:
Alexander Arms
wayne@alexanderarms.com
540-639-8356
According to The Firearm Blog, “Hornady submitted the cartridge to SAAMI last year but the application was rejected because Alexander Arms refused to relinquish the trademark.” With the waiver of trademark objections by Alexander Arms, look for greater production of standardized 6.5 Grendel ammo and brass. We can also expect more factory and custom rifles to be chambered in the efficient 6.5 Grendel cartridge. Some gunsmiths had avoided working with this cartridge because of Alexander Arms’ trademark claims. In fact, the were even concerns about sales of “6.5 Grendel” chambering reamers, so some gun-builders developed slightly-different wildcats in order to get around Alexander Arms’ objections. But that is all “old history” now….
December 27th, 2010
Story by Larry Keane, NSSF
 Since the early 1970s, ammunition being shipped in the United States has been classified under “Other Regulated Materials” — class D (ORM-D) regulations. This precludes the need for hazardous material (HazMat) shipping charges and other expensive handling requirements. The savings to the industry has been estimated at more than $300 million per year.
The Sporting Arms and Ammunition Manufacturers Institute (SAAMI) recognized a potential risk of losing ORM-D status due to the emerging “global harmonization” of shipping regulations. Simply put, the U.S. was likely to adopt United Nations (UN) regulations in an attempt to help ease the global shipping process by adhering to one uniform policy. The problem with shifting to UN regulations is that there is no “ORM-D” status, so if/when this happened, ammunition would have to be shipped under the UN 1.4s category — a category that includes HazMat fees.
 SAAMI petitioned the world body to change its shipping regulations to allow for a Limited Quantity (LQ) exemption for class 1.4s products that meet certain testing criteria. Then, SAAMI proved that ammunition meets these criteria. The LQ exemption for loaded ammunition would allow countries to adopt regulations very similar to the current U.S. Department of Transportation (DOT) ORM-D classification, yet still be in alignment with global shipping regulations.
‘LQ’ Ammo Shipping Class Will Replace ‘ORM-D’
The UN has adopted SAAMI’s petition and the new international regulation have become final. In the meantime, the U.S. Dept. of Transportation (DOT) has announced sweeping changes to U.S. regulations that will harmonize them with the international regulations. Included in these upcoming changes are the elimination of ORM-D status and the addition of the LQ exemption for ammunition . The net result is that while the regulations will change, shipment of ammunition in the U.S will continue without additional fees and handling requirements. So you will still be able to ship loaded ammo with NO Haz-Mat Fees, but in the future, the ORM-D status will change to LQ exempt status.
|
