|
|
June 17th, 2012
 How to Avoid Shooting your Chrono: There is nothing more frustrating (or embarassing) than sending a live round into your expensive new Chronograph. When setting up a chrono, we always first remove the bolt and bore-sight to ensure that the path of the bullet is not too low. When bore-sighting visually, set up the rifle securely on the sandbags and look through the bore, breech to muzzle, lining up the barrel with your aim point on the target. Then (during an appropriate cease-fire), walk behind the chronograph. Looking straight back through the “V” formed by the sky-screens, you should be able to see light at the end of the barrel if the gun is positioned correctly.
Adjust the height, angle and horizontal position of the chronograph so the bullet will pass through the middle of the “V” below the sky-screens, no less than 5″ above the light sensors. We put tape 5″ up on the front sky-screen supports to make it easy to align the bore to the right height over the light sensors. Make sure the chrono housing is parallel to the path of the bullet. Don’t worry if the unit is not parallel to the ground surface. What you want is the bullet to pass over both front and rear sensors at the same height. Don’t try to set the chrono height in reference to the lens of your scope–as it sits 1″ to 2″ above your bore axis. To avoid muzzle blast interference, set your chronograph at least 10 feet from the end of the muzzle (or the distance recommended by the manufacturer).
IRON SIGHT Rifles: A common mistake, particularly with newbie AR15 shooters, is to use the iron sights when setting the height of the chronograph. All too often, people forget that AR sights are positioned roughly 2.4″ above the bore axis (at the top of the front sight blade). If you set your bullet pass-through point using your AR’s front sight, the bullet will actually be traveling 2.4″ lower as it goes through the chrono. That’s why we recommend bore-sighting and setting the bullet travel point about 5-8″ above the base of the sky-screen support shafts. (Or the vertical distance the chronograph maker otherwise recommends).
TARGET AIM POINT: When doing chrono work, we suggest you shoot at a single aiming point no more than 2″ in diameter (on your target paper). Use that aiming point when aligning your chrono with your rifle’s bore. If you use a 2″ bright orange dot, you should be able to see that through the bore at 100 yards. Using a single 2″ target reduces the chance of a screen hit as you shift points of aim. If you shoot at multiple target dots, place them in a vertical line, and bore sight on the lowest dot. Always set your chron height to set safe clearance for the LOWEST target dot, and then work upwards only.
December 4th, 2011
SAAMI, the Sporting Arms and Ammunition Manufacturers’ Institute, is an association of the nation’s leading manufacturers of firearms, ammunition and components. Founded in 1926, SAAMI promulgates industry standards for firearms ammunition safety, interchangeability, reliability and quality.
New SAAMI Website Offers Free, Printable Cartridge Diagrams
SAAMI recently rolled out a new website loaded with invaluable info for shooters. From the new SAAMI site you can access hundreds of FREE official cartridge diagrams and chamber drawings for all ammo types: Rimfire, Pistol Cartridges, Rifle Cartridges, and Shotshells. Are you looking for the official 17 HMR diagram, or 6.5 Creedmoor, or 7mm Winchester Short Magnum? You’ll find them all, along with hundreds more, on the SAAMI site. Said Rick Patterson, SAAMI’s managing director. “This redesigned website will help provide greater visibility and understanding of SAAMI’s important work.”
Please Read These Instructions Carefully
To access the cartridge diagrams, go to SAAMI’s Technical Information webpage, and CLICK ON Cartridge and Chamber Drawings to reveal categories. You will find links to 20 new and/or updated cartridges there.
To find the full set of cartridge diagrams, you need to click on the link to Current Cartridge & Chamber Drawing documents — American National Standards Published by SAAMI. There you will find links to four categories of diagrams: Rimfire, Shotshell, Centerfire Pistol/Revolver, and Centerfire Rifle. These links will launch large PDF files that have diagrams of the cartridge types. NOTE: These are very large PDF documents. For example, the Centerfire Pistol/Revolver PDF is 189 pages long. You must scroll down to see the cartridge type you want.
Unfortunately, the organization of the SAAMI site is much less convenient than before. Previously you could access a page and then simply click on a link for the cartridge you wanted to view. Below is a sample of the first page of the previous Rifle Cartridge Diagram List.
Red arrows show you where to click, after you launched the page under the old website.
SAAMI Standards Documents With Additional Info
You can also click the subcategory links under SAAMI/ANSI Standards to see multiple diagrams in a larger PDF file. You may have to click the SAAMI/ANSI standards line first to display the four sub-categories: Pistol/Revolver, Centerfire Rifle, Rimfire, and Shotshell.
Credit Boyd Allen for finding SAAMI’s Cartridge Diagram PDF Archive.
.
September 24th, 2011
The following recall and safety notice was issued on September 20, 2011 by Steyr Arms. Apparently some Steyr 9mm pistols have an issue which could allow the firearm to discharge without a normal trigger pull. The affected serial numbers are listed below.
|
 STEYR ARMS — SAFETY WARNING + RECALL NOTICE
STEYR M9-A1, C9-A1, AND S9-A1 PISTOLS
Steyr Arms, Inc. has determined a potential condition with the firing pins in a very limited number of 9mm Steyr M9-A1, C9-A1 and S9-A1 pistols that could possibly allow the pistol to fire without the trigger being pulled. Although Steyr Arms, Inc. has not received any reports of accidents or injuries, it is voluntarily initiating this recall to protect the safety of its customers because of the remote possibility of an unintentional discharge occurring.
The affected M9-A1 pistols bear serial numbers 3021926-3021928, 3021932-3021935, 3021946-3021955, 3021966-3021988, 3021990-3021993, 3021995-3022001, 3022003-3022005, 3024663-3024672, 3024683-3024688, 3024690-3024702, 3024704-4024712, 3024733-3024738, 3024741-3024742, 3024802-3024811, 3024852-3024871, 3024882-3024901, 3025299-3025308, 3025311, 3025313-3025333, 3025335-3025338, and 3025353-3025359.
The affected C9-A1 pistols bear serial numbers 3022128-3022145, 3022152, 3022169-3022171, 3022174, 3022176-3022178, 3022180-3022201, 3022203-3022218, and 3022845-3022854.
The affected S9-A1 pistols bear serial numbers 3022929-3022931, 3022933, 3022935-3022937, 3022975-3022977, 3022988-3022991, 3022993, 3022995-3022996, 3024146-3024175 and 3024354.
Only the M9-A1, C9-A1 and S9-A1 pistols with the serial numbers identified above are affected by this recall. If your pistol has a different serial number, it is not subject to the recall.
|
How to Respond to Recall
If you own a Steyr M9-A1, C9-A1 or S9-A1 pistol with a serial number identified as being affected by this recall, please do not load or fire your Steyr M9-A1, C9-A1 or S9-A1 pistol and contact us immediately to arrange to have the firing pin in your pistol replaced, free of charge, using the following steps:
Step 1 – Contact us at 205-655-8299 (Monday-Friday 8-5 Central Standard Time) or at www.steyrarms.com/contact and provide the model and serial number of your pistol.
Step 2 – After confirming that your pistol is subject to this recall, we will send you a prepaid overnight shipping box with instructions so that you can return your pistol to us, free of charge.
Step 3 – We will replace the firing pin in your pistol and return it to you overnight free of charge. We will make every effort to return your pistol to you within one week of receiving it.
March 15th, 2011
 Remington issued a Safety Warning And Recall Notice on 3/14/2011 concerning Remington’s .223 Rem ammo. Remington states that four (4) lots of its .223 Rem 62gr Hollow Point (Match) Ammunition may have been improperly loaded. The affected LOT numbers are H03RAI, H04RDI, H16NAI, and H17NDI. Lot numbers are found on the inside flap of each box. Do NOT use these lots of ammo — the cartridges may develop excessive pressure, causing “damage to the firearm, serious personal injury or death.” If you have any of the recalled ammo, contact the Remington Consumer Service Dept. at 1-800-243-9700, Prompt #4.
Below is the text from Remington’s Recall Notice:
Product Safety Warning — Recall Notice
Remington .223 62 GR (MATCH) Hollow Point Ammunition
LOT NOS. H03RAI, H04RDI, H16NAI or H17NDI
Remington has determined that four (4) Lot Numbers of its .223 Remington 62 Gr Hollow Point (Match) Ammunition may have been improperly loaded. The four (4) Lot Numbers are identified above. Improper loading may cause a malfunction of the cartridge when the firearm is fired resulting in higher than normal pressures. This malfunction may result in damage to the firearm, serious personal injury or death.
Do Not Use REMINGTON .223 62 GR (MATCH) HOLLOW POINT AMMUNITION WITH
LOT NOS. H03RAI, H04RDI, H16NAI or H17NDI
To identify if you have one of these Lots of ammunition:
* If you have a case of .223 Remington 62 Gr Hollow Point (Match) Ammunition the Lot Number is stenciled on the outside of the case; and,
* If you have a box of .223 Remington 62 Gr Hollow Point (Match) Ammunition the Lot Number is stamped on the inside flap of the box.
If you have any of this .223 Remington 62 Gr Hollow Point (Match) Ammunition, as identified above, immediately discontinue use of this ammunition and contact Remington at the below telephone number. Remington will arrange for the return shipment of your ammunition and upon receipt will send you replacement ammunition at no cost to you. If you are unsure whether or not you have one or more of these Lots of ammunition or if you have mixed boxes of ammunition; please immediately discontinue the use of the ammunition and contact Remington at the below telephone number — we will replace this ammunition for you.
For any consumer questions or instructions on how to return of your .223 Remington 62 Gr Hollow Point (Match) Ammunition with one of the following Lot Numbers H03RAI, H04RDI, H16NAI OR H17NDI, please contact the Remington Consumer Service Department at 1-800-243-9700, Prompt #4.
Story sourced by Edlongrange.
February 11th, 2011
Pistol shooters take heed. Federal Cartridge Company has issued a recall on 45 Auto (.45 ACP) ammo, stating: “Certain lots of recently manufactured 45 Auto ammunition may contain an incorrect propellant charge. Use of product from these lots may result in firearm damage and possible serious injury.” CLICK HERE for 45 Auto (.45 ACP) Warning Flyer.
THIS WARNING APPLIES ONLY TO THE LOTS LISTED ABOVE.
If you possess ammunition from any of these lots, or have questions concerning this warning, please contact us at 1-800-831-0850 or 1-800-322-2342 and ask for Product Service. Federal will provide replacement product and will cover the cost of returning the affected product. Return recalled 45 Auto (.45 ACP) ammo to:
FEDERAL CARTRIDGE COMPANY
900 Bob Ehlen Drive
Anoka, MN 55303
Toll Free Phone: 1-800-322-2342
Story Sourced by Edlongrange.
October 21st, 2010
On October 20th, CNBC broadcast “Remington Under Fire”, a story attacking the safety record of Remington model 700 rifles. CNBC’s report suggests that the Rem 700 is unsafe because it can discharge merely from moving the safety or lifting the bolt, even if the trigger is not pulled. The show, which aired last night, has already created a big stir in the gun industry. Jason Schauble, VP of Remington Defense Division, responded in an NRA News interview just hours after the “documentary” aired. Schauble attacked CNBC’s “irresponsible programming”, stating that the problems trumpeted by CNBC could not be replicated by the manufacturer (or even by plaintiffs’ lawyers). CLICK HERE for the Schauble interview. Schauble argued, “CNBC squarely placed us in their cross-hairs… [with] a loosely strung-together series of data points that relied more on an emotional pull than the facts[.]”
Remington Launches Remington700.TV Website to Defend Product
Remington has challenged CNBC’s report, asserting that the Rem 700 has an excellent safety record. Remington also argues that CNBC’s “experts” were biased and lacked proper qualifications and knowledge. An official response by Remington states: “CNBC ignored facts and information provided by Remington and instead relied on allegations, misleading anecdotes, and false claims.” Remington has also launched a dedicated web-page, www.Remington700.tv to counter the CNBC report. On that site Remington states:
For nearly fifty years, the Remington Model 700 rifle has been the preferred choice for millions of hunters, shooting sports enthusiasts and military and law enforcement personnel. Despite emotional reporting of baseless and unproven allegations and plaintiff lawyer assertions, several undisputed facts remain:
• The Model 700 is the most popular, reliable, accurate and trusted bolt-action rifle in the world, with over five million rifles produced and billions of rounds fired over nearly five decades.
• The Model 700 is the firearm of choice for elite shooters from America’s military and law enforcement communities, and has been the platform for the United States Marine Corps and the U.S. Army precision sniper weapon systems for over two decades, both of which specifically require the “Walker” trigger mechanism.
• The Model 700, including its trigger mechanism, has been free of any defect since it was first produced and, despite any careless reporting to the contrary, the gun’s use by millions of Americans has proven it to be a safe, trusted and reliable rifle.
• Both Remington and experts hired by plaintiff attorneys have conducted testing on guns returned from the field which were alleged to have fired without a trigger pull, and neither has ever been able to duplicate such an event on guns which had been properly maintained and which had not been altered after sale.
October 17th, 2010
On October 20th, CNBC plans to air a television “exposé” about Remington Arms. The hour-long show argues that there may be a safety issue associated with the Remington 700 series of rifles. We haven’t viewed the show yet, but Jim Shepherd of The Shooting Wire is familiar with its contents. Jim, a veteran journalist, recently wrote a cogent commentary on CNBC’s “investigation” of Remington. Given the important insights Jim reveals, his commentary is well worth reading.
 |
 |
Yesterday morning, I received a promotional piece from CNBC, touting an hour-long investigation into America’s largest firearms company. The promo piece teases “Remington Under Fire: A CNBC Investigation” a story that CNBC says will “take viewers inside a 10-month investigation of the world’s most popular hunting rifle and examines whether a company has gone too far in protecting their signature product.” That product being the Model 700 bolt-action rifle. With more than five million sold, it is hard to argue its domination of the bolt-action rifle market.
 It’s hard to argue with the idea that a serious safety defect — especially if it was deliberately downplayed-could cause serious repercussions.
Having spent nearly three decades in journalism, when someone says their exclusive “examines” rather than “exposes” — my first impression is always that the story didn’t come to the conclusion they’d presumed, so they’re leaving plenty of wiggle room in the story by “examining the question” rather than “answering it”. That doesn’t say it’s not interesting, whatever the conclusion.
According to the release, CNBC Senior Correspondent Scott Cohn traveled from Florida to Alaska, uncovering numerous complaints about Remington’s 700 model rifle. The most intriguing fact is Cohn’s having “tracked down” 98-year-old Mike Walker, the Remington engineer who designed the trigger for the Remington 700. The report purports to have an interview — and internal memorandums from Walker — that indicate he had repeated safety concerns about the trigger system — even after he left the company.
Video teasers for the program, however, don’t show Walker. Instead, they show Jack Belk “gunsmith, former cop” and expert witness in a variety of lawsuits against Remington. In the soundbite — admittedly designed to titillate, not answer questions — Belk says “no gun should fire unless the trigger is pulled.”
Not exactly the building of a rock-solid case. But in many cases — especially those tried in the fickle court of public opinion — emotion will trump logic.
I’ve not spoken to anyone at Remington regarding the reports — and CNBC says Remington only responded to their interview requests in writing.
For Remington, that’s prudent business practice. From CNBC, it’s couched as to leave the impression that a lack of willingness to go on camera and talk about six decades of business practices indicates there’s something to hide.
That’s not the case — it is impossible for current management to have first-hand knowledge of anything that happened nearly six decades ago. Consequently, when you don’t know what to say, the best thing to say — especially in a television interview — is nothing.
Remington Under Fire is scheduled to air on October 20. We’ll be watching and at that time, Remington officials will be offered the opportunity to respond to the program.
Article © 2010 The Shooting Wire, All Rights Reserved, reprinted with permission. “Grudge Match” graphic created by AccurateShooter.com and not included in original story.
September 15th, 2010
 Beretta U.S.A. Corp. has discovered a potential condition with Beretta .22 caliber NEOS semiautomatic pistols in which the pistol will fire even if the safety is activated and, in some cases, the pistols may fire if the safety is moved from the OFF to the ON position. Because of safety concerns relating to this situation, Beretta U.S.A. Corp. is immediately implementing a recall of Beretta .22 caliber NEOS semiautomatic pistols.
If you have a Beretta NEOS pistol, send it to Beretta’s Accocreek, MD Service Center for repair. Instructions on how to send your Neos to Beretta are available at www.berettasupport.com/neos or by calling 1-800-BERETTA.
Note: Some pistols are not subject to recall. Please visit www.berettasupport.com/neos to see if your NEOS has already been repaired. If the firing pin for your NEOS looks like New Version 1 or 2 above, you do not need to return it. Returned NEOs pistols will be retrofitted, at no cost to the owner, with a replacement firing pin assembly. The new firing pin assembly can be identified either by a circle on the back of the firing pin that includes a red dot in the center, or by a vertical line as shown in the photos. Please make sure that your Beretta NEOS pistol is unloaded before delivery to the service center. Do not experiment with your Neos pistol to see if it has the potential safety issue.
May 10th, 2010
The National Shooting Sports Foundation (NSSF) now offers FREE educational video DVDs about firearm safety and wildlife conservation to teachers and school administrators. Already, more than 4,500 DVDs have been ordered by educators. Teachers can order the DVDs (and download related PDF brochures) via the NSSF website. In addition to the videos, each DVD contains guides and activity planners to assist teachers. For more information, visit the NSSF Education Videos webpage.
The Firearms Safety DVD contains three video segments, two designed for viewing by students and one for a general audience. These videos show students how to make correct decisions when encountering a firearm in an unsupervised situation at school, at home or at a friend’s home. The Wildlife Conservation DVD features three videos that teach students about America’s wildlife management system and explain how hunters contribute funding for conservation. Teachers can preview both the Firearms Safety Videos and the Conservation Videos on the NSSF Website.
“We believe teachers and school administrators should teach students how to correctly respond if they encounter an unattended firearm. Students who understand what to do in such situations can potentially save lives,” said Steve Sanetti, NSSF President. Regarding conservation education, Sanetti said, “We have a generation of children who spend less time outdoors and who see more wildlife on television than in the wild. It’s important that students today understand how once-endangered species such as white-tailed deer and wild turkey have been brought back to abundance through efforts funded by hunters.”
April 9th, 2010
.223 WSSM and 6mmBR Disaster — Report by Dr. Jim Clary
Under most circumstances, shooters don’t have to worry about chambering the wrong cartridge into the wrong rifle. After all, the cartridges are well marked and we all know which rifle we are shooting on any given day. In many cases, incorrect cartridges cannot be chambered — larger cases will not fit in smaller chambers, for example. No problem! That being said, I can tell you that even an experienced, careful and normally safe shooter can make a mistake.
The following is an account of just such a mistake that could have resulted in death or dismemberment. Fortunately, the shooter was not hurt, but the rifle was completely destroyed.
Last year, a friend purchased a Savage Precision right bolt, left port, single shot bolt action in 6mmBR Norma. It was an incredible prairie dog gun and he spent the summer burning powder and busting dogs. In October, he purchased a stainless steel Browning A-Bolt Varmint in .223 WSSM. The weather in the upper Midwest turned sour by the time he got the brass tuned up and he only got to fire it a few times before he was “socked in” for the winter. Thus, he spent his evenings loading ammo for the spring thaw.
During a break in the weather, he grabbed both rifles and a couple of bags of .223 WSSM and 6mmBR cartridges and headed to the range to check out his new loads. In case you are not familiar, the 6mmBR is smaller in diameter and a mite shorter than the .223 WSSM. Because of this, it will chamber in a .223 WSSM, but the .24 caliber bullet is too big for the .22 caliber bore. That is what happened to my friend.
The rest is history; when he squeezed the trigger, all hell broke loose. The entire bottom of the rifle blew out, including the magazine assembly. The explosion actually cut the stock into two pieces. However, the bolt held and amazing as it may seem, the .243 bullet was “swaged” right out of the .223 barrel.
6mmBR (left) and .223 WSSM (right) cartridges above the remains of Browning A-Bolt rifle.
One Small Mistake Is All It Takes
Now, realize that my friend has been shooting all manner of firearms, safely, for over half a century. He is meticulous, thorough and conscientious in his approach to reloading and shooting. However, he made one mistake. He put some lose 6BR cartridges in a baggie as he packed up from a prairie dog hunt last summer, without noticing that the baggie was marked .223 WSSM in black marker. Then, when the break in his winter weather came, he grabbed the bag, believing it to be the WSSM cartridges and didn’t check the head stamp.
Couldn’t happen to you? How many times have we emptied our pockets of cartridges and dropped them into a plastic container on the shooting bench? How many times have we set down to a marathon reloading session, loading several calibers in a row? How many times have we put the wrong bullets, cases or primers into the incorrect container? My point is that even the safest of us can make a mistake. So, look at the picture above and take a bit more time when you reload your ammunition at home or chamber a round in the field. It might save your life.
Story and photo © Dr. Jim Clary, All Rights Reserved.
COMMENT: In a thread inspired by the above story, the moderator of another gun forum wrote:
“There was a rifle (or what was left of it) mounted above the door of a range I used to go to. The story behind it was of a guy who was shooting a .30-06 and set it aside to shoot his .25-06 instead. He didn’t bother putting the larger cartridges away first and of course one found its way into his gun. The explosion took three fingers off his left hand, two off his right and stuck a piece of the bolt in his face. He recovered but was never the same again. The pieces of the gun were gathered and mounted to show others why it pays to be mindful of what you’re doing. It was effective as there was never another such accident at that range.”
|
