Sebastian Lambang of SEBrests.com has done it again. He’s taken his very successful SEB Mini front tripod rest, and made it even better, with multiple enhancements. He calls the enhanced front rest the SEB “Mini-X”. This new Mini-X has some very impressive features, including a new, improved top bag and new tilt-adjustable fittings on the legs. The new Mini-X is currently featured on Seb’s Facebook Page
On the end of each legs are angle adjustments, which Seb calls an “ankle”. This allows the foot-pads to remain flat on uneven (non-level) ground. Each foot adjusts separately using a locking lever. You can adjust the angle and height in seconds using the blue locking lever and blue height adjustment wheel. See adjustment process in animated GIF photo below left:
New Configurable Side-Plate Design
For the new Mini-X, Seb changed the design of the side plates securing the sandbag: “The plates can be adjusted so the user can rotate the thin outer side plate to place the tension screw on either the lower or higher position. The old one is on the lower position. This screw height placement can make a difference on the side bag’s tension. The higher position would keep the stock in place — not moving up during recoil. In F-Class that is OK. People can use the lower holes for Benchrest Competitions.” Seb says the new-design side plates also have smoother, rounded edges.
Seb tells us the new Mini-X weighs 5.5kg (12.1 pounds) with sandbag empty. That makes it much easier to carry/transport that some heavy front rests.
Here are the new SEB Mini-X and standard Mini side-by-side. In the middle, you can see the new Mini-X side-plate with multiple holes for tension screw.
Standard Mini Rest Improvements
The original SEB Mini rest also has some enhancements for 2021. A new bag is available, and the height adjustment screws are now angled 10 degrees. This allows the adjustment shaft to be more vertical (straight up and down). That should make the height adjustments work more smoothly and adapt better to uneven ground. Here are recent photos from the factory. Note how the sandbag is lower in the center. This is designed to prevent the center “hump” that can form over time in conventional bags. A hump in the middle can prevent the stock from riding evenly, which can, in turn, allow rocking. This new bag should provide a better engagement on the sides of a flat-bottomed competition stock. We also expect improved tracking. F-Class bag is shown. There is also a benchrest bag version.
Share the post "New SEB Mini-X Front Rest — Impressive New Features"
Review by F-Class John
Walk the line at any F-Class or Benchrest match and you’ll see plenty of SEB rests — for good reason. SEB produces some of the most popular competition shooting rests available today. With their ease of use and smart design, it is no wonder why SEB rests are so popular. But as good as they are, there are ways SEB rests can be made even better — such as making them easier to align precisely to the target during set-up. It was while shooting with his SEB NEO one day that inventor, fabricator, and competitive F-Class shooter Rod Brakhage decided to make a better mouse trap — to improve the SEB series of rests. He identified aspects of the NEO/MAX rests and SEB Mini tripod rest that could be enhanced and he then set out to improve their already great performance.
This photo shows the new Rodzilla 5-Axis top installed on a SEB Mini tripod rest. There are also Rodzilla tops for the SEB NEO and MAX two-column front rests.
Nearly a year and countless prototypes later, Rod unveiled his new Rodzilla 5-Axis Top to a select group of shooters to test and it’s been a wild ride ever since. Best of all, his top is drilled and tapped so that it can be fitted to a SEB NEO, MAX, or Mini front rest without altering the rest base in any way. To make things easy, if you don’t want to install it yourself, you can send just the bridge from your NEO/MAX or top from a Mini and Rod will install the 5-Axis unit. You pay for the Rodzilla top, and Rod will install it for free. The Rodzilla NE0/MAX tops currently sell for $549.00, while the Rodzilla Mini top is $584.00.
Watch Video to See All Features of Rodzilla 5-Axis Rest Top:
Rodzilla Top Swivels Independently of Rest Base
The first thing Rod did was allow the top to swivel independently of the base. On a NEO this makes a HUGE difference because you can now set your rest down in the general direction of your target and make final adjustments once you’re down behind the gun. This is a huge departure from the normal procedure where you find yourself moving your NEO repeatedly until it’s just right. You can do the same thing on a Mini which is actually a nice feature despite the head already swiveling because you can now lock down the Mini head and make your final adjustments behind the gun as well. This is probably the feature that stood out the most to me when I first set it up. Being able to lock the front end down and get comfortable immediately behind the gun without having to get up again was a time-saver. This also left me feeling very confident in my gun alignment to the target.
Delrin Rollers on Side Guide Stock during Recoil
The second major innovation is the addition of Delrin rollers along the side. The unit has two easily adjustable jaws that each contain a set of rollers. These rollers allow for as much or little contact as you want along the sides of your stock and provide a smooth if not near frictionless experience whether during recoil (breakaway) or when returning the gun to battery. the departure from traditional sandbags on the side quite revolutionary, and yes it is legal under NRA rules. Current NRA High Power F-Class rules have no limits on what material contacts the sides of the stock. As someone who has owned a number of front rests and filled countless small sandbags this comes as a welcome relief! The Rodzilla’s rollers give me confidence that I’ll have consistent contact with the stock without the side bags constantly shifting and needing my attention during a match.
Small, Separate Sandbags Provide Consistent Contact at Any Gun Angle
Another major Rodzilla advancement is the design of the left and right sandbags. Conventional sandbags are stationary and oriented to the rest itself meaning that if you’re shooting uphill or downhill then you may not have stock contact with the full bag surface or the stock may be at a weird angle to the sandbag. Plus, with time, conventional front sand bags can form crowns or lumps that require attention. Those problems are solved with the Rodzilla’s tilting mini-sandbags. Rod’s sandbags are very small yet still meet NRA High Power guidelines as they are filled with sand and can be visibly deformed when pushed. But otherwise, they are unlike anything you’ve seen before. Each bag is mounted on a pivoting arm allowing the gun to always keep consistent contact with each bag regardless of the angle of your rest. This provides confidence that your stock is always riding on the same amount of sandbag no matter how the rest has been placed, or the ground angle relative to target.
CONCLUSION: The Rodzilla 5-Axis Top is a Game-Changer If you have a SEB Rest you will definitely want this…
The innovative design features of the Rodzilla 5-Axis Top make SEB rests work even better. The Rodzilla Top delivers an incredibly smooth and repeatable shooting experience. Recoil seems smoother, and it is easier to align the rest on target during set-up. If you own a SEB rest and are looking to make your set-up on the line easier and faster, have near-zero breakaway force on each shot, and have consistent follow-up shots to your point of aim, then give the Rodzilla 5-Axis Top a try.
This Video shows how to install the Rodzilla 5-Axis Top on SEB Mini tripod rest:
This Video shows how to install the Rodzilla 5-Axis Top on SEB NEO or MAX Rest
Share the post "New Rodzilla 5-Axis Top for SEB Rests — Superb Functionality"
Our friend Sebastian “SEB” Lambang, creator of the great SEB Coaxial Rests, Joystick Bipods (“JoyPods”), and SEB MINI Coaxial tripod rests, is working on a new front bag design. He has released photos of his new, prototype front bag system for the top-of-the-line NEO Rest.
Seb notes: “We are experimenting with a new bag for our SEB NEO rest, particularly for F-Open Class with the heavy 22-lb rifles. This new bag is sewn down the middle, slick enough for the purpose, and made from a much tougher material. The bottom/horizontal bag has two separate compartments on the left and right sides to prevent sand migration. For the production version I think I will use black instead of silver.”
Do you like the new design? Do you have any suggestions on how it could be enhanced? Seb is looking to get shooters’ feedback on this new bag design. You can post comments on Seb’s Facebook page.
New F-Class and Benchrest Front Bags for SEB MINI
Seb will also be offering a new similar bag for his excellent (and very popular) SEB MINI tripod front rest. There will be a sewn-in-middle F-Class version (see right below), as well as a flat-top, conventional bag for registered benchrest matches. Due to differences in the equipment rules, Seb notes: “The sewn-in-middle front bag can be used for F-CLASS matches. However, be sure to not use the F-CLASS bag (sewn down in the middle) for official Benchrest matches.”
COMMENT: The advantage to the Stitched-in-Middle front bag design is that the bag will never develop a hump in the middle that can cause your stock to rock a little (or sit at a slight tilt). If you are not shooting in restricted competition, Seb’s new bag design could prove beneficial — providing a more optimal front support. We don’t have the dimensions of Seb’s center-sewn front bags, but we suspect a version might fit other brands of front rests, such as Sinclair or Bald Eagle (Grizzly).
Share the post "New Front Bags for SEB NEO and MINI Rests — Input Wanted"
Army of Minis getting ready to conquer the world (well at least the world of shooting).
The Minis are Coming! The Minis are Coming!
Good new for fans of the SEB Mini coaxial tripod rest. This superb compact joystick rest has been in high demand, creating a long waiting period. Now scores of bright new Minis are being readied for shipment to the USA, Canada, and other nations. On Monday, July 13, Sebastian (“Seb”) Lambang posted a Facebook photo of Minis getting ready to ship. That inspired scores of “likes” from Seb’s Facebook fans including action-maker Jim Borden and past F-Class National Champ James Crofts. Larry Bartholome, another former F-Class Champion, wrote: “Hey SEB — people are looking forward to more Mini Mondays!”
Sebastian (“Seb”) Lambang’s SEBRests.com team is shipping these out worldwide to meet demand. The great thing about the Mini is that it folds up into a small package, making it much easier to transport than a conventional coaxial front rest such as the Seb NEO or Farley.
Responding to Seb’s Facebook post, Todd Banks posted this photo with the comment “Love my Mini!”:
SEB Mini in Action at Berger Southwest Nationals
Even though the Mini is compact and relatively light weight, it is very stable and gives up very little in performance to a full-sized joystick front rest such as the SEB NEO. Our Systems Admin Jay Christopherson uses a SEB Mini. In the 2017 Berger SWN, Jay finished Second in F-Open Class just one point behind winner David Gosnell, thereby proving the SEB Mini is “competition ready”. Jay reports: “I’m glad I had the SEB Mini — it worked great and was much easier to transport and carry from position to position.” Here’s Jay using the SEB Mini to drill a string of Xs with his .284 Winchester F-Open rifle.
Carry Bag for SEB Mini
With the success of the SEB Mini, Seb Lambang has designed some accessories. Here is a prototype carry package, the Mini Transporter. This compact bag will hold a Mini even with big F-Class feet attached.
Share the post "SEB Mini Front Rests Are On Their Way to the USA…"
The Berger Southwest Nationals is taking place right now at the Ben Avery Range outside Phoenix, Arizona. At the SWN you’ll see prone rifles and tubeguns for sling shooters, F-TR rifles with fancy bipods, and high-tech F-Open rigs. You might also see a few TubeGuns converted to shoot F-Open off front rests. Yes this is an easy conversion thanks to Gary Eliseo’s clever PickleFork forearm attachment.
Forum Member Killick attached PickleForks to his handsome blue Eliseo R1 TubeGun now chambered in .284 Winchester, a top choice for the F-Open discipline. Killick explains: “Behold! An Eliseo R1 F-Classer. This started out as an R1 Long Range sling rifle (6XC) with a Borden TubeGun action. It is now rebarreled in .284 Win with Gary’s PickleFork fore-end adaptor. Props to Gary Eliseo at Competition Machine LLC.”
Killick adds: “I like how the original fore-end indexes off the back side of the front bag. No need for the front bumper attachment.” Check it out below:
PickleForks are rails that fit to the sides of the tubular fore-end/handguard on Eliseo Chassis systems. This allows you to use a pedestal-style front rest for F-Class competition. It also provides a much more stable platform for load testing, varmint hunting, or any kind of rest-assisted precision shooting. These new PickleForks transform a Tubegun into an ultra-stable, straight-tracking rig when used with a competition-style front rest.
Designer Gary Eliseo explains: “Now you can have the same super low-boreline, long wheelbase and vertical sides of our innovative F1 F-Class chassis system for your tube chassis. The PickleForks attach directly to the sides of the F-Class/Tactical fore-ends, no modifications are required. They are very rigid with no flex or twist and make the rifle track like it’s on rails.” The Eliseo Competition Machine PickleForks are offered for a very reasonable $70.00 per pair, with Cerakote finish. You get two metal units, one for each side of the fore-arm. For more info, visit GotXRing.com or call (928) 649-0742.
Share the post "Two Guns in One — TubeGun Transformed for F-Open Competition"
The new SEB Mini joystick (coaxial) pedestal rest has been a huge success. Sebastian (“Seb”) Lambang’s SEBRests.com team is shipping these out worldwide to meet demand. The great thing about the Mini is that it folds up into a small package, making it much easier to transport than a conventional coaxial front rest such as the Seb NEO or Farley. Shown above is an army of Minis getting ready to conquer the world (well at least the world of shooting).
Even though the Mini is compact and relatively light weight, it is very stable and gives up very little in performance to a full-sized joystick front rest such as the SEB NEO. At the Berger SW Nationals last month, our Systems Admin Jay Christopherson used a SEB Mini. Jay finished Second in F-Open Class just one point behind winner David Gosnell, thereby proving the SEB Mini is “competition ready”.
Jay reports: “I’m glad I had the SEB Mini — it worked great and was much easier to transport and carry from position to position.” Here’s a short video of Jay using the SEB Mini to drill a string of Xs with his .284 Winchester F-Open rifle.
New Carry Bag for SEB Mini
With the success of the SEB Mini, Seb Lambang has already started designing some new accessories. Here is a prototype carry package, the Mini Transporter. You can see this compact bag will hold a Mini even with big F-Class feet attached. Seb says: “I’m experimenting with soft case for Mini rest… Your thoughts?” We think Seb should certainly offer this case for sale. Post your thoughts in the comment section below.
SEB Mini with large disc feet attached still fits in bag.
Share the post "Invasion of the Minis — Compact Joystick Pedestal Rest from SEB"
