Amazing See-Through Suppressor Video from Smarter Every Day
Popular YouTube Channel Smarter Every Day recently released a fascinating video featuring rifle suppressors with see-through acrylic sleeves. The team filmed shots through the suppressors using ultra-high-speed (110,000 frame per second) cameras. When played back in super-slow-motion, you can see the flame propagate through the suppressor and the bullet move through each baffle before it exists the muzzle. Notably, you can see different internal flame effects depending on the baffle design. Watch the results in the video below — it’s mesmerizing:
See Through Suppressor in Super Slow Motion (110,000 fps) — Click Arrow to Watch:
Soteria Suppressors designed the unique see-through suppressors.
The Science of Suppressor Design
Commentary by Zak Smith of Thunder Beast Arms Corp.
The high speed transparent silencer video is pretty neat. It certainly demonstrates, to some extent, the violence that happens inside centerfire rifle suppressor when firing.
At Thunder Beast Arms Corp. we have carefully studied the forces/pressures operating inside suppressors. The “uncorking” pressure when the bullet exits the muzzle is typically in the 8,000 to 15,000 psi range, but some combinations of cartridge and barrel length can extend this up to the 25,000 psi range. Job #1 of a suppressor designer is to build a suppressor that won’t explode. Job #2 is to build one that quiets down the muzzle report significantly. Doing that well, with the minimum amount of material, is the tricky part.
Suppressor design is both art and science, and we approach our R&D from three sides: experience, experimental testing, and computation.
There are a lot of opinions about how to design a quiet suppressor. Many of these are based on preconceived notions of how suppression “should work”. These theories may or may not work when built and tested in the real world. Where the rubber hits the road is experimental testing. I would say that a majority of knowledge about “How to design a quiet suppressor” comes from building hundreds or thousands of prototypes and testing them with good equipment in a cogent experimental process. Some of those theories pan out, but many of them do not.
Thunder Beast Arms Tests its Suppressors in the Lab and in the Field.
Scientific Software Aids Design
We have also made a large investment in computation fluid dynamics (CFD) and finite-element analysis (FEA) software and use it in addition to other computer-model analysis to look at the physics that occurs inside the suppressor. This type of analysis gives information about material effects that is pretty much impossible to get any other way. Even so, the computer cannot tell you how to design a
suppressor, and the results must always be checked and compared to reality.
Thunder Beast Arms Corporation was started ten years ago with the goal of producing the best precision rifle suppressors. Our current ULTRA series in .223, 6.5 mm, .308, and .338 calibers provides industry-leading suppression performance with very light weight.
