Sig Sauer Recalls Some Semi-Auto Rifles for Hammer Issues
Sig Sauer recently issued a safety recall for certain SIG 516, 716, and M400 model rifles with two-stage triggers. There was a production problem with the hammer that could create a “significant safety hazard”. If you own one of these SIG rifles, read this Safety Warning and Recall Notice. Sig Sauer will fix the particular rifles that have defective hammers at no cost to the customer. The replacement trigger will also be a two-stage match model.
SIG SAUER Safety Warning and Recall Notice
Published Date: 09/15/2017SIG SAUER, Inc. has determined that a limited number of rifles in the SIG716 DMR®, SIG516® Carbon Fiber, and SIGM400® Predator models were built with a two-stage SIG SAUER trigger that may have an improperly heat-treated hammer. Over time this could result in a trigger malfunction creating a significant safety hazard. SIG SAUER is issuing a mandatory recall to replace the hammer and trigger assembly in these specific rifles. This recall does not affect any military or law enforcement rifles or any SIG MCX®/SIG MPX® products.
SIG SAUER will correct any of the affected firearms at no cost to the customer. The firearms affected by the recall can be identified by the presence of a SIG mark etched into the hammer:
To determine if a specific firearm is affected by the recall, go to:
https://www.sigsauer.com/support/safety-center/rifle-safety-warning/ and utilize the serial number identifier and visual inspection instructions. See illustration below:
If you are a customer who is affected by the recall, stop using the firearm immediately and follow the instructions on the website or call SIG SAUER Customer Service by dialing 603-610-3000, option #1. Have the rifle’s serial number available. If your rifle is affected you will be issued a pre-addressed shipping label and box.
Sig M400 Predator Product Features
