|
|
May 17th, 2016
There are two segments on Shooting USA this week that are well worth watching. On Wednesday (May 18, 2016), Shooting USA features a lengthy segment on the Bushnell Brawl tactical match. This is followed by an “Impossible Shoots” episode featuring top USAMU shooter SSG Daniel Horner.
 This Wednesday, May 18th, Shooting USA TV features the Bushnell Brawl, a tactical competition that draws top long-range shooters from the military, law enforcement and the civilian shooting communities. The match is held at the famed Rifles Only range in Kingsville, Texas. The Brawl is a one-of-a-kind physical and mental challenge that tests each shooter’s ability to read wind, figure ballistics, and adapt to difficult shooting scenarios. There is even a helicopter stage.
Shooting from a helicopter, shooting off of a wire, and shooting from the physically demanding maze called the Mouse Trap. These are just a few of the unique courses of fire at the Bushnell Brawl, part of the PRS series. Over the course of two days, competitors tackle more than a dozen stages, and this year Bushnell hosted a special one-day event for the new PRS Production Class. This new division should attract new shooters by limiting the cost of equipment — making PRS competition affordable.
New PRS Production Division — Lowering the Cost of Entry
The Production Division is a new PRS classification. Under Production Division rules, the rifle and scope must cost under $3,000, combined. All other accessories, such as bipod, rear bag, and the sling, can be added at the shooter’s own discretion. By lowering the cost of entry, PRS organizers hope to get more shooters involved: “There’s a lot of gear out there that’s not that expensive that you can use to get into this and start to play the game,” says Production Division Match Director Jacob Bynum.
Shooting USA’s Impossible Shots — Threading the Needle
This time, SSG Daniel Horner has combined with the Army Marksmanship Unit Gunsmiths to set up the ultimate Impossible Shot. Horner attempts to send one bullet through two barrels to pop a balloon.
This challenge is definitely demands the ability to “thread the needle”. In other trick shot challenges this week, Randy Oitker switches to a crossbow to set up his Annie Oakley-style, over the shoulder challenge. Julie Golob is your guide to some of the most amazing exhibition shots ever seen.
|
Shooting USA Hour on Wednesday Nights
Eastern Time – 3:00 PM, 9:00 PM, 12:30 AM Th
Central Time – 2:00 PM, 8:00 PM, 11:30 PM
Mountain Time – 1:00 PM, 7:00 PM, 10:30 PM
Pacific Time – 12:00 Noon, 6:00 PM, 9:30 PM
Also on Saturdays Prime Time:
Eastern Time – 12:30 AM
Central Time – 11:30 PM
Mountain Time – 10:30 PM
Pacific Time – 9:30 PM |
Impossible Shots — Wednesday Nights
Eastern: 10:30 PM
Central: 9:30 PM
Mountain: 8:30 PM
Pacific: 7:30 PM |
May 10th, 2016
The Ruger Precision Rifle (RPR) has been a huge sales success. Nearly a year after its introduction, the RPR remains in very high demand. The first production run by Ruger essentially sold out, so it is very hard to find one for sale, in any caliber.
CLICK HERE for Large-format Ruger Precision Rifle Product Brochure (4mb PDF).
Though it has a big winner on its hands, Ruger has made some upgrades to its popular RPR. An “enhanced” RPR will be offered with a new handguard, bolt shroud, and muzzle brake. Two new models have been added to the RPR line-up, the model 18004 in .308 Win, and the model 18008 in 6.5 Creedmoor. These models, priced at $1599.00 MSRP, feature a new, low-profile handguard, a new aluminum bolt shroud, and a muzzle brake. The new handguard will work better for scopes with large front objectives. The muzzle brake should reduce felt recoil, but we do wonder whether accuracy might suffer. The brakeless, first-generation RPRs exhibited very good accuracy most of the time.
For the time being, the original model RPRs will be offered along with the new enhanced RPRs: “Both the original and enhanced configurations will be available from Ruger for a time, with the initial pattern being phased out as supplies are depleted.” (Source: American Rifleman). But there is a catch. The new models cost $200.00 more than Gen 1 RPRs. Ruger lists a $1599.00 MSRP for the enhanced RPRs versus $1399.00 for Gen 1 models.
To See NEW FEATURES, click the image below, then SCROLL down the page on the Ruger web page that loads. Yes, the VIDEO is there — you just have to scroll down.
According to American Rifleman, the new handguard has multiple benefits: “Still free-floating and KeyMod-compatible, the new design omits the original’s top-mounted Picatinny rail in order to increase scope clearance. Given the larger objective lenses utilized by long-range optics, this enhancement makes a lot of sense. The bottom surface of the new handguard is also contoured with a flatter surface, providing for a more stable foundation for the mounting of bipods than the original model.” Current RPR owners can purchase the new-style 15″ aluminum handguard for $249.95 from ShopRuger.com.
 Ruger RPR Hybrid Muzzle Brake
The original, Gen 1 Ruger Precision Rifle had a threaded muzzle covered by a thread cap. The new “enhanced model” features a factory-installed “hybrid” brake fitted to the barrel. This brake combines radial holes in the rear half with large, angled side ports in the front. Ruger claims the brake reduces recoil almost 40% on a 6.5 Creedmoor. This brake can be purchased separately for $99.95 from ShopRuger.com.
April 18th, 2016
Here’s a new tactical-style rifle you should consider if you are involved in the Tactical/Practical shooting disciplines. It features a modern, adjustable Archangel stock with the smooth, made-in-Japan Howa 1500 action, outfitted with a detachable 10-round box magazine.
Legacy Sports, distributor for Howa rifles, is offering the new Howa Archangel Rifle in .223 Remington and .308 Winchester. The ambidextrous, carbon-reinforced polymer stock features a click-adjustable cheek-riser, adjustable length-of-pull, grip storage compartment, plus front/rear quick-detach flush cups. There is also a clevet, integrated, push-button bipod attachment system. The Howa actions mate precisely into the stock and ride on aluminum pillars.
In .223 Rem or .308 Win, the complete rifle, with either 20″ or 24″ barrel, starts at $915.00 MSRP, including 10-round mag. We expect the actual street price to be around $800.00. That makes this a more affordable alternative to the Ruger Precision Rifle, which is commanding $1200.00+ these days (if you can find one). Note: Archangel Mfg. offers this Howa 1500-compatible stock in Black, OD Green, and Desert Tan, but it appears that the initial Legacy Sports complete rifle will be in black only. These rifles are fitted with the very good HACT adjustable two-stage trigger and 3-position safety. The Howa Archangel rifle is also available (for about $230 more) in a scoped package with a 4-16x50mm Nikko Sterling Scope (see below). For more information call Legacy Sports at 1-800-553-4229 or visit LegacySports.com.
Note: If you already own a rifle with a Howa 1500 barreled action, you can purchase the Archangel AA1500 stock separately (MSRP $355.99) from Arizona-based Archangel Manufacturing. This company also offers similar stocks for Rem 700, Springfield M1A, and K98 Mauser barreled actions, starting at just $202.99 for the Mauser variant.
March 28th, 2016
What do you get when you cut a 6.5 Creedmoor-chambered barrel down to just over 16 inches? A lot more velocity than you might think. Our friends at Rifleshooter.com recently did a barrel cut-down test with 6.5 Creedmoor test rifle, shortening the barrel from 27 to 16.1 inches in one-inch increments. Surprisingly, with a 142gr Sierra MK, the total velocity loss (as measured with a Magnetospeed) was just 158 FPS, an average of 14.4 FPS per inch of barrel length. With the lighter 120gr A-Max bullet, the total velocity loss was 233 FPS, or 21.8 FPS average loss per inch of barrel.
To perform this velocity test, our friend Bill, Rifleshooter.com’s editor, built up a 6.5 Creedmoor rifle using a Remington Model 7 action, 1:8″ twist Green Mountain CM barrel, and MDT LSS Chassis, all obtained from Brownells.com.
Test Procedure
Five (5) rounds of each type of cartridge were fired at each barrel length and the velocity data was recorded with a MagnetoSpeed V3 barrel-mounted chronograph. The rifle was then cleared and the barrel was cut back one inch at a time from 27″ to just over 16″. NOTE: During this winter test, the air temperature was a very chilly 23° F. One would expect higher velocities across the board had the outside temperature been higher.
The photo below shows how the barrel was cut down, inch-by-inch, using a rotary saw. The barrel was pre-scored at inch intervals. As the main purpose of the test was to measure velocity (not accuracy) the testers did not attempt to create perfect crowns.
6.5 Creedmoor vs. Other Mid-Sized 6.5mm Cartridges
The 6.5 Creedmoor is a very popular cartridge with the tactical and PRS crowd. This mid-size cartridge offers good ballistics, with less recoil than a .308 Winchester. There’s an excellent selection of 6.5mm bullets, and many powder choices for this cartridge. When compared to the very accurate 6.5×47 Lapua cartridge, the 6.5 Creedmoor offers similar performance with less expensive brass. For a tactical shooter who must sometimes leave brass on the ground, brass cost is a factor to consider. Here’s a selection of various 6.5 mm mid-sized cartridges. Left to right are: 6.5 Grendel, 6.5×47 Lapua, 6.5 Creedmoor with 120gr A-Max, 6.5 Creedmoor with 142gr Sierra MK, and .260 Remington.
When asked to compare the 6.5 Creedmoor to the 6.5×47 Lapua, Rifleshooter.com’s editor stated: “If you don’t hand load, or are new to precision rifle shooting, get a 6.5 Creedmoor. If you shoot a lot, reload, have more disposable income, and like more esoteric cartridges, get a 6.5×47 Lapua. I am a big fan of the 6.5×47 Lapua. In my personal experience, the 6.5×47 Lapua seems to be slightly more accurate than the 6.5 Creedmoor. I attribute this to the quality of Lapua brass.”
March 19th, 2016
Last summer we published our comprehensive 6.5×47 Lapua Cartridge Guide, researched by the 6.5 Guys. In case you’ve been wondering what kind of accuracy is possible for a tactical-type rifle chambered for this mid-sized cartridge, check out this tack-driver built by gunsmith Ryan Pierce. That’s a mighty impressive 0.206″ five-shot group fired with Berger 140gr Hybrids using a Brux cut-rifled barrel. The powder was Hodgdon H4350, a very good choice for this cartridge.
Ryan reports: “Here is a 6.5×47 I built for a customer. It features a trued Rem 700 action, Brux 1:8″ Rem varmint-contour barrel, Mcmillan thumbhole stock, Surgeon bottom metal, and 3-port muzzle brake. The customer’s preferred load is the same that has worked in the last couple dozen 6.5x47s I’ve built: 41.1-41.3 grains of H4350 with 140 hybrids .050″ off the lands. This should run about 2810-2815 fps from a 26″ barrel. The 3.128″ refers to length of a loaded round from the base to ogive including the Hornady ogive comparator tool.”
March 9th, 2016
We often get questions about the 6.5 Creedmoor Cartridge — folks ask where they can find good resources for this cartridge, which is popular with Across-The-Course, High Power, and tactical shooters. We did some searching and found that the August 2011 digital edition of Shooting Sports USA has a good article for all fans of the 6.5 Creedmoor.
 Development of the 6.5 Creedmoor Cartridge
In the August 2011 Edition of Shooting Sports USA you’ll find a lengthy feature on the 6.5 Creedmoor cartridge. This story covers the origin of the cartridge and its performance both as a match cartridge and as a hunting round. Hornady Chief Ballistician Dave Emary explained: “the original intent of the cartridge was as an across-the-course match cartridge. We envisioned it as an off-the-shelf round that would produced the accuracy and ballistics to compete in all match disciplines right out of the box. At the same time we realized that the same characteristics would make an exceptional hunting cartridge with the right bullets.”
 6.5 Creedmoor Brass No Longer Washed After Annealing
Here’s an interesting update on Hornady 6.5 Creedmoor brass and loaded ammo. In a move to improve case quality and neck uniformity, Hornady recently changed the 6.5 Creedmoor production process, eliminating the case-washing step after annealing. So now you will see annealing coloration on 6.5 Creedmoor brass, just like on Lapua brass. Dennis DeMille of Creedmoor Sports wanted to improve the consistency/uniformity of 6.5 Creedmoor case-necks. At Dennis’ suggestion, Hornady conducted tests which showed that the “standard industry practice” of washing brass could potentially alter the necks in undesirable ways. Bottom line, unwashed annealed brass was determined to have an accuracy edge over washed brass. Looking at these results, Hornady decided to forgo the post-anneal washing process. As a result, the latest 6.5 Creedmoor brass now displays the distinctive coloration left by neck/shoulder annealing. Learn something new every day, eh?
February 5th, 2016
Here’s an AR configuration suited to the new AR Mid-Range Prone Discipline: Moderate-length barrel, Harris Bipod, Leupold Mark AR MOD 1 4-12x40mm scope. Photobucket image by Ingo1978.
The NRA has created a new mid-range, target-shooting discipline for AR owners. The provisional rules for the new AR Mid-Range Prone Competition will allow calibers from .22 up to .308. Rifle weight will be limited to 14 pounds. Competitors may use Harris (or similar) compact, “tactical” bipods, and optics up to 12-power will be allowed (but iron sights can also be used). The goal of this new competition is to get the many AR owners to the range to compete.
The NRA’s Information Sheet for the new mid-range discipline explains: “These rifles are of the ‘AR-Platform’ variety, semi-automatic, chambered in any caliber from .223 cal./5.56mm. up to and including .308 cal./7.62mm. The courses of fire will be the same courses of fire currently used for other NRA Mid-Range (Prone) High Power Competition (300, 500, and 600 yards) and are designed to be fired concurrently with other forms of Mid-Range competition. The targets will be the same targets that are used for Service Rifle, Match Rifle, and Palma Rifle Mid-Range Prone competition. Mid-range telescopic sights will be allowed, but not required. Because this is prone competition, shooters may use tactical front rests such as Harris-type bipods and limited rear rests of the type one might find used in military or police tactical situations.”
A very prominent NRA member who works with the Competition Committee recently posted this explanation of the new AR discipline on our Forum:
NRA Mid-Range (Prone) Tactical Rifle (AR)
For those clubs and match directors who have members with ARs who want to shoot Mid-Range Prone but who don’t want (or can’t afford) to shoot traditional “sling” or F-Class, we have a new opportunity to get those ARs out of the closet and onto the range with very little in the way of additional costs:
It’s called Mid-Range Tactical Rifle (AR). A copy of the description and the Rules (Provisional) are attached as a PDF file and should be published by the NRA very soon. CAUTION — these are NOT official — but I think they are accurate:
In brief, here’s how it works:
1. The event will be fired concurrently with any other Mid-Range event, alongside of F-Class and “sling” divisions.
2. The Event will be fired on the “sling targets”.
3. AR Rifle General Standards:
Calibers: 223/5.56 up to and including .308/7.62mm
Weight: Overall weight not more than 14 pounds
Support: Harris-type “tactical bipod” (no large F-Class bipods).
Optics: Scope not more than 12X
Barrel: Not more than 20″
Trigger: Trigger pull not less than 4.5 pounds
4. This is NOT F-Class — this is designed to be closer to “tactical”. F-Class competition gear is generally illegal; competition stocks are generally illegal. [The event] is designed to attract more law enforcement and/or military (maybe local National Guard?) and other “tactical shooters” out to the range shooting for precision. For more info, check out the attached PDF file.
CLICK HERE for AR Mid-Range Prone Competition Information Document..
You’ll find a discussion of this new AR Mid-Range discipline in our Shooters’ Forum, HERE: AR Mid-Range Match Forum Thread. Here are some interesting comments from that thread:
“Opening up mid-range matches for ARs is a great idea. I’m not an AR guy myself, but I have lots of shooting friends who are. They tend to have a lot of ideas what their guns are capable of out to 600 yards, but most don’t take many opportunities to shoot them at those ranges, and none of the existing High Power disciplines are very appealing. Until now. I hope it doesn’t become an equipment race. A 185/200 is a respectable score even with a 12″ 10 ring. I hope everyone is supportive — helping get these guys on the paper and providing positive feedback even for scores that seem modest by F-Class standards.” — Comment by Berger.Fan222
“It looks like the recommended targets will be the same as conventional shooters use (i.e. ~1 MOA X-ring). Given the specifications for rifles/bipods/scopes/etc., I think this would be an appropriate level of difficulty to start. It will be challenging, particularly at 600 yards, but by no means impossible. Of course, at 600 yards, anyone shooting an AR15 (.223/5.56) will be at a disadvantage to ballistically-superior calibers unless they come up with a good way to load 80+ grain bullets that will mag-feed. Personally, I’d like to see this limited strictly to .223 ARs. Almost everyone has one and the mag feed requirement would really keep things even across the board. The inclusion of other calibers will allow this to become a ‘caliber race’ in that .223 will have a very hard time keeping up with other, better calibers at 600 yards.” — Comment by gstaylorg
“Looks like a great new addition. The PDF document says rule 7.20 for course of fire which is mid-range slow fire. I believe all slow fire is currently ‘one round loads’. The PDF explicitly states 10-, 20- or 30-round magazines and no sleds. Does anyone know if this new discipline would be fired from magazine or one-round loads? Shooting from magazine would be keeping with the ‘tactical’ aspect and enforcing mag-length loads. But it does not seem to jive with the ‘one round load’ currently stipulated for slow fire?” — Comment by Highpower-FClass
February 1st, 2016
This Wednesday (February 3, 2016), Shooting USA TV features the 2015 GAP Grind Pro-Am held at the K&M Shooting Complex in Finger, TN. Conducted in association with the Precision Rifle Series (PRS), the GAP Grind features a Pro/Am format with professional and amateur competitors vying for individual glory and team honors.
Here is Shooting USA Host John Scoutten (in Blue/White shirt)
Lots of Action, with 20+ Stages
The GAP Grind is a notoriously challenging, “high tempo” match with minimal down-time between stages. Over the course of 20+ stages, competitors will fire 200+ shots at a variety of steel, paper, moving, and reactive targets out to 1,200 yards. Targets vary in size/difficulty based on the shooter’s position, distance, and time allotted. Most stages include “stressors” — i.e. time limits or required movement(s).
GAP Grind Hardware
Shelley Giddings, a skilled shooter of both firearms and cameras, snapped these images of state-of-the-art tactical rifles at the 2014 GAP Grind. See more firearms images on Shelley’s Facebook Page.
January 12th, 2016
Newly-issued CMP and NRA competition rules now allow Service Rifle competitors to use optics with a max magnification of 4.5X. That’s right, Service Rifle shooters can now use scopes, not just iron sights. These rule changes have created a need for a new type of riflescope, one optimized for today’s “optics-allowed” Service rifle discipline.
March Optics has just introduced a brand new 1-4.5x24mm scope designed for Service Rifle competition and tactical applications. With ultra-sharp ED glass, this new March scope should set the standard for AR-friendly 4.5X optics. This compact variable-power scope offers ideal eye relief for AR-type rifles, along with plenty of windage and elevation range. The new March 1-4.5x24mm scope is a second focal plane optic with 1/4-MOA clicks. Weight, without caps, is 18.7 ounces. The scope comes standard with a speed lever for quick zooming throughout the magnification range.
The optics experts at March tell us: “This scope was specifically designed for the Service Rifle match shooter. New rules were announced in October 2015 that allow scopes with magnification up to 4.5X power. This 1-4.5x24mm scope also makes a great optic for SWAT work as well as for a sporting rifle. Oversized tactical turrets allow for easy windage and elevation adjustments. The high quality ED lenses provide superior image resolution that make March the best in its class”. The MSRP of this high-end scope is $2750.00. March is offering a 15% OFF special now for regular purchasers*. This scope will be on display at SHOT Show Booth 549.
* March offers a 20% off MSRP price on this scope for Law Enforcement/Military members (current and retired), Pros, and U.S. Team members.
December 15th, 2015
For years we have touted the advantages of Burris Signature rings, with polymer Pos-Align Inserts. Now this system is available in a beefier, heavy-duty ring system for tactical rifles. The new Burris XTR Signature Rings offer six (6) clamping bolts per ring plus strong, dual steel base-clamps that self-center on Weaver or Picatinny rails. These aluminum XTR Signature Rings provide strength and holding power, plus the key benefits of Pos-Align inserts. As impressive as XTR rings are — they aren’t that expensive, with 1″-diameter XTRs starting at about $90.00 per pair (30mm and 34mm XTRs cost a bit more).
The polymer inserts in Signature rings perform three key functions. First, the inserts provide full, uniform scope-to-ring contact, with no need for lapping. You get a very secure “grip” on your scope without ring marks. Second, the Pos-Align inserts can provide elevation “pre-load”. With eccentric (offset) inserts, you can raise the back of the scope relative to the front, gaining up to 54 MOA of built-in elevation, without the need for expensive tapered bases. Third, the offset inserts can be rotated clockwise or counter-clockwise to shift point of impact. This lets you zero your rifle easily while keeping the turrets in the center of their travel.
Burris XTR Signature Rings are offered in 1″, 30mm, and 34mm diameters, and three (3) different heights: 1″, 1.25″, and 1.5″. Each ring set includes two sets of concentric inserts and one set each of the following offset inserts: +/-5 MOA, +/-10 MOA, +/-20 MOA. These allow you to “pre-load” elevation and/or center up your cross-hairs.
– Pre-load Elevation. No need for expensive tapered bases for long-range shooting.
– Correct misalignment caused by off-center receiver holes.
– Correct for bases or rings being slightly off-center.
How to Pre-load Elevation
To add elevation, set the Pos-Align Offset Inserts to raise the rear of the scope and lower the front. As long as there remains sufficient clearance between the front objective bell and the barrel, Burris recommends lowering the front of the scope the most and raising the rear of the scope the least. The amount of actual elevation “pre-load” will depend on the ring spacing (see chart). In the illustration, with 4.75 inches between ring centers, a +/- 20 MOA pair in the front combined with a -/+ 5 MOA pair in the rear will yield +25 MOA of total elevation. (If the rings are positioned further apart, you’ll get less elevation pre-load.)
Using Inserts to Adjust Point of Impact in Any Direction
Although it is convenient and most understandable to refer to the ring inserts as a “bottom” or “top” insert, the inserts may be rotated to any angle within the scope rings. This allows the shooter to correct the point-of-impact in any direction. The drawings below show how the inserts can be rotated to induce both elevation and windage changes at the same time.
Product tip from Boyd Allen. We welcome reader submissions.
|
