Sako, and its subsidiary Tikka, make some of the finest hunting rifles you can buy. These offer smooth actions, and very good out-of-the-box accuracy for factory rifles. In addition, Sako and Tikka now offer high-tech carbon fiber stocks, along with Sako’s handsome wood stocks. With the three videos showcased today, you get a virtual tour of the Sako/Tikka production facilities in Finland.
Tour of Finland SAKO/Tikka Factory — 22-Minute Video
In this informative video, the Canada in the Rough team tours the Sako/Tikka factory in Riihimäki, Finland. All aspects of the production process are covered — crafting actions, barrel-making, stock fitting and more. It was interesting to see the hammer-forging process for barrels, and the exacting measurements that are performed on the actions and bolt assemblies. If you have an interest in rifle production and the type of modern, computer-controlled machinery now being used, definitely watch this video.
Visit to SAKO/Tikka Carbon Fiber Stock Factory
This Sako-produced video shows how the company’s modern carbon-fiber stocks are produced. The stock production process is highly automated, to ensure that the finished stocks have very precise dimensions. These carbon Sakos are some of the nicest carbon-fiber stocks we’ve ever seen.
SAKO Factory Tour in Riihimäki, Finland
In this segment, huntress and outdoor video host Mia Anstine tours the Sako manufacturing facility in Riihimäki, Finland. This video covers both firearms production and ammunition manufacturing. In a follow-up video posted below, Mia tests Sako rifles and Sako ammunition at a Finland range. Mia also reported on her Sako factory tour in the Beretta Blog. She notes: “Sako built its original manufacturing facility during World War I. To this day they still utilize the original buildings but have also grown over the years to include larger production areas and updated equipment.”
Canada in the Rough Video Tip from Boyd Allen — we welcome reader submissions
Share the post "Saturday at the Movies: SAKO and Tikka Factory Tours"
Sako, and its subsidiary Tikka, make some of the finest hunting rifles you can buy. These offer smooth actions, and very good out-of-the-box accuracy for factory rifles. In addition, Sako and Tikka now offer high-tech carbon fiber stocks, along with Sako’s handsome wood stocks. With the three videos showcased today, you get a virtual tour of the Sako/Tikka production facilities in Finland.
In this informative video, the Canada in the Rough team tours the Sako/Tikka factory in Riihimäki, Finland. All aspects of the production process are covered — crafting actions, barrel-making, stock fitting and more. It was interesting to see the hammer-forging process for barrels, and the exacting measurements that are performed on the actions and bolt assemblies. If you have an interest in rifle production and the type of modern, computer-controlled machinery now being used, definitely watch this video.
Visit to SAKO/Tikka Carbon Fiber Stock Factory
This Sako-produced video shows how the company’s modern carbon-fiber stocks are produced. The stock production process is highly automated, to ensure that the finished stocks have very precise dimensions. These carbon Sakos are some of the nicest carbon-fiber stocks we’ve ever seen.
SAKO Factory Tour in Riihimäki Finland
In this segment, huntress and outdoor video host Mia Anstine tours the Sako manufacturing facility in Riihimäki, Finland. This video covers both firearms production and ammunition manufacturing. In a follow-up video Mia tests Sako rifles and Sako ammunition at a Finland range. Mia also reported on her Sako factory tour in the Beretta Blog. She notes: “Sako built its original manufacturing facility during World War I. To this day they still utilize the original buildings but have also grown over the years to include larger production areas and updated equipment.”
Canada in the Rough Video Tip from Boyd Allen — we welcome reader submissions
Share the post "Video Showcase: Sako and Tikka Finland Factory Tour"
Gavin Gear, founder of the UltimateReloader.com website, has created a very popular YouTube Channel. Over the past 13 years, Gavin has produced hundreds of videos covering nearly every aspect of reloading, rifle assembly, and gunsmithing. When important new reloading products are released, you’ll often find that the very first, in-depth reviews come from Gavin. He seems to get the new stuff before ANYone else.
And Gavin’s multi-product reviews are legendary, such as his remarkable 14-Press Shootout. That video, in which Gavin set up and operated 14 different single-stage presses, has received over 583,000 views, making it Gavin’s third most popular video of all time. The Single-Stage Shootout video, along with Gavin’s five other most popular videos, are linked below.
Consider this a “Greatest Hits” showcase, with a half-dozen Ultimate Reloader videos that have, collectively, been watched nearly 8.5 million times. We present these videos in descending order of total YouTube views, leading with Gavin’s epic .223 Rem vs. 5.56 video, which has been watched over 5 million times.
.223 Rem vs. 5.56x45mm — 6.3 Million Views
Full Story:https://bit.ly/2neNXAS
This video explains essential facts and corrects common misconceptions related to both .223/5.56 ammunition, as well as .223/5.56 rifles. Gavin provides insight on chamber specs, pressure levels, barrel twist rates, military 5.56 crimped brass, and other important topics. If you are new to the AR world, this video is definitely worth watching. And that’s why it now has garnered over 6.3 MILLION YouTube views, making it one of the most popular gun-related videos ever. Gavin adds: “Don’t forget to check out the full write-up on UltimateReloader.com.”
Lee Loadmaster loading .45 ACP — 1.08 Million Views
The .45 ACP is a classic cartridge, and one of the best for a starting reloader. The case diameter is large enough that you can see the case fill level easily. Also you can pick a powder that won’t allow a mistaken double charge (the case will overflow). In this video, from Gavin’s early days on YouTube, Gavin shows how to run a Lee Loadmaster progressive. Lee should be paying Gavin royalties, as this video have been watched over 1 million times.
AR Handguard Upgrade Step-by-Step — 870,000 Views
The AR15 is truly “America’s rifle”. Along with buttstock replacement, one of the most common upgrades done by AR owners is changing out the front handguard. In this video, Gavin shows how to replace your stock handguard with a modern free-floating system. There can be accuracy improvements with this upgrade, and this also allows you to optimize the ergonomics and weight balance of your black rifle.
Full Story:https://bit.ly/2WS9jE0
This truly may be the “ultimate” reloading press video. Running a full 41 minutes in length, this video shows the features/operation of no less than fourteen (14) modern single-stage presses. No other reloading gear review even come closes to this video in terms of the variety of products covered and the sophistication of the tests. In his full story, Gavin offers comparison charts with sizing force and seating precision comparisons. He also measures ram to press frame fit.
Anyone considering purchasing a single-stage press should watch this video from start to finish. A typical gun magazine review might look at two or three presses, load a few rounds, and then offer some subjective comments. Gavin studied 14 presses, did very thorough testing, and delivered tons of objective data. Listed below are 13 of the presses tested. Click each press name for specific details and test results:
Lee Loadmaster Loading .223 Rem/5.56 NATO — 526,000 Views
Here’s another early video from the Ultimate Reloader YouTube Channel. Gavin shows how to produce .223 Rem/5.56x45mm ammo with an affordable Lee Loadmaster progressive. Gavin explains how to set up the Loadmaster and how to best control priming, case sizing, and powder-dropping operations. For anyone thinking about getting a progressive press, this video is worth watching. Gavin has created many other videos reviewing progressive presses from Dillon, Hornady, and RCBS. And just last year he showcased the amazing Mark 7 Apex 10, a ten-station progressive press marketed by Lyman. Gavin’s Mark 7 Apex 10 was equipped with both case-feeder and bullet feeder, allowing very impressive production rates.
How It’s Made: BAT Custom Rifle Actions — 489,000 Views
Full Story:https://bit.ly/3hD2d11 BAT Machine Co. makes some of the finest custom actions you can buy. Numerous national and world records have been set with BAT actions. To create this 31-minute video, Gavin traveled to Idaho to visit the BAT Machine production center in Post Falls, ID. Gavin talked with BAT’s founder Bruce Thom. The video features extensive footage of advanced CNC machines used to produce the superb BAT actions.
Click Image Below to Visit the Ultimate Reloader YouTube Channel:
Share the post "Gavin’s Greatest Hits — Ultimate Reloader Video Showcase"
There is so much to see at SHOT Show, with nearly 2000 exhibitors showcasing tens of thousands of products. SHOT Show is the largest trade show of its kind in the world, attracting 60,000+ attendees from more than 100 countries.
Many teams of reporters and camera crews covered SHOT Show this year. Collectively they’ve now posted a wide selection of video reports. In today’s SHOT Show video showcase, we feature eight of our favorite video reports from SHOT Show 2020, plus one great video “Blast from the Past”.
SIG Sauer Cross Bolt-Action Rifle in 6.5 Creedmoor and .277 Fury
Sig reveals its new Cross precision rifle. This features user-swappable barrels, folding stock, adjustable cheekpiece and buttplate, plus a quality adjustable trigger. Hunters take note — the Cross weighs under 7 lbs. without optics. Initially this rifle will be offered in 6.5 Creedmoor and the new .277 Fury chamberings.
New Scopes from March Optics
March Optics has some very impressive products for 2020. In this video, Stuart Elliot from Australia covers the features of the March 4.5-28x52mm PRS scope, the March 5-42x56mm Long Range scope, and several other premium optics.
The Reborn Colt Python — Vickers Tactical Report
Larry Vickers discusses the return of the Colt Python with Colt representative Justin Baldini. We shot the new stainless Colt (4″ barrel version) on Monday 1/20 and were very impressed, the fit/finish is really excellent. The trigger was precise, and the accurate was superb.
New Volquartsen Summit in 17 WSM Rimfire
This Brownell’s video showcases Volquartsen’s new Summit rifle chambered for the .17 WSM (Winchester Super Magnum) rimfire cartridge. The Summit features a coated stainless toggle-bolt action (with 20 MOA rail. There a crisp, 1.75-lb pull trigger, choice of stainless steel or lightweight carbon fiber barrel (both with threaded muzzle). The Summit uses reliable Ruger rotary magazines.
New MP5 Clone and Other New Rifles from Palmetto State Armory
Palmetto State Armory (PSA) reveals new rifles. First is the Jackal, an innovative AR variant with monolithic upper and gas piston. Then PSA show the long-awaited PSA5, a semi-auto HK MP5 clone. Also features is the Jackal. The video also covers multiple AK type rifles and the PS9 DAGR pistol (at beginning of video).
G.A. Precision New Products for 2020
G.A. Precision’s Founder George Gardner reviews new options for 2020. A major force in the Tactical/PRS world, G.A. Precision builds excellent rifles and sponsor major PRS events. George is one of the creators of the new 6GT cartridge. This video showcases both hunting rigs and tactical rifles.
Vortex 1-10x24mm Scope for Hunting and Tactical Comps
Vortex’s new 1-10x24mm scope has been creating a lot of buzz. We checked it out at the Vortex booth and think this scope is a good choice for competitors who sometimes need a very wide field of view, and for hunters who can quickly scan at 1-3X and then sight their prey at higher power. AT 1X power this illuminated scope works like a red dot for close ranges. And then 10X is plenty for game hunting.
New SOG Knives for 2020
According to KnifeCenter.com, SOG has some very impressive new products for 2020. The reviewers praised the XR Lock, as well as an assisted version. Many updated older “fan favorites” will also be available in 2020. Nearly 15 minutes long, this video covers a wide selection of blades.
Blast from the Past…
This last video is from 2017, but it’s still well worth watching. With a cool soundtrack, the video is entertaining and features lots of pretty ladies!
Share the post "SHOT Show Day Three — Video Showcase"
