Lube Choices for Case Sizing — Reviewing the Options
Sinclair International has a good article on Case Lubrication which shows the various products and application methods available. Part of Sinclair’s Step-By-Step Reloading series, the article shows how to apply Spray Lube, Die Wax, or conventional lube from a Pad. The story also explains how to use dry lube to slick up the inside of your case necks.
High-volume reloaders often turn to spray-on lubricants such as the RCBS Case Slick (#749-001-341) or the Hornady One Shot (#749-001-065) to quickly lubricate large numbers of cases at once. An indispensable piece of gear that helps make spray lubing easy is a lube rack (#749-011-550) — a polymer block that holds cases upright and arranged to maximize their exposure to the spray.
Editor’s Note: Ballistol Aerosol is other good spray product for regular full-length sizing (not heavy case-forming). It goes on clear (no chalky residue), it is ultra-slippery, and it will remove the carbon from your case necks as you apply Ballistol with a patch. This is my primary spray lube — but many folks dislike the distinctive Ballistol smell. Try before you buy.
Sizing Die Wax
Over the years, many benchrest shooters have come to trust Imperial Sizing Die Wax (#749-001-052) for their case lube needs. It offers high lubricity and easily wipes off with a paper towel. In fact, its lubricity makes it a popular choice for case forming, for those wildcat folks who need to form their own unique or obsolete cartridges. Unlike lube pads or spray lubes, sizing wax is applied more naturally. You just put a little on your fingers and transfer it to the cases by handling them. As simple and easy as Imperial Sizing Die Wax is to use, it’s probably best for low-volume applications.
Redding’s Imperial Application Media (#749-001-166) is a dry neck lube used to lube the inside of the neck, whether you’re full-length sizing or neck-sizing only. It consists of ceramic spheres coated with a fine graphite-based powder. You simply dip the neck into the container for a second to pick up the right amount of lube. This lube enables the expander ball to work smoothly throughout the case neck –instead of “grabbing” or “chattering” — to minimize case neck stretching.
Story Tip from EdLongrange. We welcome reader submissions.
Editor’s Note: Dry Lube is also very useful if you ultrasonically clean your cases. After the ultrasound process, the inside of the case neck can be so “squeaky clean” that bullets don’t seat smoothly. A quick application of dry lube will help bullets slide into the neck easier and the neck “grip” on the bullets should be more consistent from round-to-round. Consistent neck tension is key to accuracy and uniform velocities.
- Sinclair Int’l Guide to Cartridge Case Lubrication
- Try Ballistol Lube for Case Sizing, STP for Neck Turning
- Recommended Lubes for Case Sizing and Neck-Turning
- Case Lube Readers Poll — Spray Lubes Are Number One
- Non-Toxic Ballistol Lube Works Great for Case Sizing