Sierra Acquires Giant Lead Extrusion Press
“Where are the bullets, where is the powder?” (ad infinitum) is what you hear from shooters around the country these days. Well we can’t promise more powder, but Sierra Bullets has invested in machinery that should help increase bullet output. Sierra has acquired a 550-ton rated extrusion press that should pump out lead wire faster (for bullet cores). Sierra tells us: “This is a lead extrusion press we had shipped in from the state of Washington. We are diligently working on getting this thing set up and pumping more lead into our process.”
If you’re curious how this beast works, Alan Slocum posted an explanation: “It works kinda’ like this”, referring to the photo below. Sierra’s big machine uses a horizontal hydraulic ram instead of the push-down yellow Play-Doh lever, but yes the basic principle is the same.
Similar Posts:
- How Bullets are Made — Inside Look at the Barnes Factory
- Sierra Secrets — How MatchKings Are Made
- A Look Inside Sierra’s 300m Underground Test Tunnel
- Bullet Barcodes — Sierra’s Secrets Revealed
- Reloading Tip: Pulling Bullets Using Press-Mounted Collet Tools
Tags: Bullet Cores, Extrusion, Lead Wire, Sierra Bullets
Good to see this!