|
|
October 21st, 2014
 IMR is bringing out a new series of advanced-formulation extruded powders. In 2015, IMR will introduce three (3) new Enduron powders: IMR 4166, IMR 4451, and IMR 7977. The new line of IMR Enduron powders feature small kernels for easy metering, plus a built-in copper fouling eliminator. IMR claims that Enduron powders are not sensitive to temperature changes. If this is true, these powders should prove popular, particularly IMR 4166 which seems to be in the Varget/Reloder 15 burn-rate range. With Varget so hard to find, if IMR 4166 proves accurate (and available) we might see many .308 Win shooters make the switch. IMR states that IMR 4166 is a “versatile, match grade propellant”. We’ve been quite pleased with IMR 8208 XBR as a Varget alternative. IMR 8208 XBR is accurate, clean-burning, and offers good velocity. Perhaps the new IMR 4166 will be as good or better.
When will Enduron powders appear on dealers’ shelves? Hodgdon Powder Co., distributors of Hodgdon, IMR, and Winchester powders, says that: “The new IMR Enduron™ Technology powders will be available at dealers in early 2015 in 1-pound and 8-pound containers.” For more information and Enduron LOAD DATA visit imrpowder.com or check the 2015 Hodgdon Annual Manual.
IMR’s press release provides these descriptions of the new Enduron propellants:
IMR 4166 is the first in the series of Enduron™ propellants. It’s a perfect burn speed for cartridges like the 308 Win/7.62mm NATO, 22-250 Remington, 257 Roberts and dozens more.
IMR 4451 Another new Enduron powder that gives top performance in the venerable .30-06, 270 Winchester, and 300 Winchester Short Magnum, to name just a few. This propellant is ideally suited for many mid-range burn speed cartridges.
IMR 7977 is the slowest burn rate Enduron Technology powder. It is a true magnum cartridge propellant with outstanding performance in such cartridges as the .300 Winchester Magnum, 7mm Remington Magnum, .338 Lapua and more.
Share the post "IMR Introduces New Enduron Powders: 4166, 4451, 7977"
October 21st, 2014
Washington State Ballot Initiative 594, otherwise known as I-594, is bad news. This poorly-written proposed law puts dramatic restrictions on gun owners. I-594 could criminalize many traditional types of shooting activities (including training with shared firearms). I-594 is so sweeping and vague that law enforcement groups consider the initiative “unenforceable”. If you live in Washington State, you need to educate yourself about I-594. In this story, two of our shooter friends (and contributors to the Daily Bulletin) analyze I-594 and explain its flaws.
Kelly Bachand: Why is I-594 bad? I-594 is posing as a background check initiative, but that’s not what it is. I-594 limits the legal modes of recreational use by redefining a firearms transfer to include almost any time that a firearm changes hands, even if it’s just for demonstration purposes, a short-term loan, or a bona fide gift.
Top Shot’s Chris Cheng Reveals the Dark Side of I-594
If you believe in Second Amendment rights, you should watch this video. If you believe in gun rights and live in Washington state, you should make sure your friends, neighbors, and family members of voting age watch this video. Chris Cheng does a great job exposing the flaws of I-594:
 Kelly Bachand Analyzes Washington State Initiatives I-594 and I-591
Since I’m a licensed firearms dealer I’ve had to learn a lot about the law concerning firearms. It makes sense then that close friends have asked me about my position on I-594 and I-591 which are on the ballot in Washington. I’ve read the full text for both a few times. How will I vote? I will vote yes on I-591. I will vote no on I-594.
I opened up my voter’s pamphlet last night and I was incredibly surprised to find that in the Explanatory Statement from the WA Office of Attorney General, there is a statement that is simply untrue. It precedes both initiatives in the voter’s pamphlet and it reads “In Washington, a background check is only required to buy a pistol, and only if the seller is a firearms dealer.” That’s simply untrue. Every time I sell ANY firearm a background check is performed, background checks are not just done for handgun sales. Furthermore, handgun sales in WA require a secondary, redundant background check performed by local law enforcement [which is] reported to the WA DOL. S0, there are actually two background checks performed on a typical handgun sale.
Why is I-594 bad? I-594 is posing as a background check initiative, but that’s not what it is. Background checks are not bad, I-594 is bad because it’s not about background checks. If it was a well-written background check initiative that addressed actual issues with mental health and domestic violence documentation then there could actually be many firearms owners who supported it. Unfortunately, the largest impact on firearms that I-594 will have is to limit the legal modes of recreational use that are available to law abiding citizens. The things it purports to stop are already illegal so it won’t bother criminals at all that there is one more law they are breaking. I-594 limits the legal modes of recreational use by redefining a firearms transfer to include almost any time that a firearm changes hands, even if it’s just for demonstration purposes, a short term loan, or a bona fide gift.
Under I-594 I would no longer be able to borrow my friend’s new pistol to take to the range and test out before I buy one of my own; that would be a criminal act. Nor would I be able to lend my father-in-law a shotgun so that he could go shoot trap with his church group; that would be a criminal act. Why would I make such specific examples of what would be illegal under I-594? Those sorts of simple examples I gave are simple actions that many responsible firearms owners do regularly, and now they would be criminal. It’s already illegal to sell to a felon or anyone you even think may not be able to own a firearm. If I-594 is passed, it won’t bother criminals at all, they will still get firearms from black markets and through theft, but it will really bother those law0abiding citizens who enjoy even the simplest things like target shooting and introducing their friends to the same.
Why is I-591 better? I-591 says that WA State’s background check system will continue to be in line with the ATF’s regulations, the law at a federal/national level. The means background checks are still required for all firearms sales by dealers. It also means that law-abiding gun owners won’t be criminalized for typical recreational activities with firearms. I-591 also restates that confiscating firearms from a citizen by any government agency without due process is illegal. Is this already unlawful? Yes it is. It has been demonstrated, though, that in some states where initiatives like I-594 have passed (California for example) that the increased government oversight on law abiding citizens’ activities has created scenarios where firearms have been confiscated without due process.
Share the post "Watch and Read: Chris Cheng and Kelly Bachand Explain I-594"
October 20th, 2014
A while back we published an Introduction to .50-Caliber Shooting authored by James Patterson. James has written a companion piece for Sinclair’s Reloading Press that covers the “care and feeding” of the big .50 Cal match rifles.
Owning and Feeding ‘The Big Bore’
Is The Challenge Of Big Bore Extreme Range Shooting And Hunting Right For You?
By James Patterson
Handling a 50 BMG
Is a 50 BMG caliber rifle difficult to shoot? Not at all. The relatively heavy weight of a standard rifle at 30 pounds or more combined with a very efficient muzzle brake makes it a pleasure to shoot. The typical recoil can be compared to a .243 rifle or a 12 gauge trap load. On the other hand, the burning of a typical load of 230 grains of powder combined with that muzzle brake makes the muzzle blast experience exhilarating. A first time shooter will fire, pause for a moment in awe at the muzzle blast, and then break out into what has become known as “The 50 caliber Grin”, almost impossible to wipe from ones face. My daughter started competing with the 50 BMG at 18 (115 lbs of tall skinny girl) and happily shoots 100+ rounds in the course of a match, her grin on the last round is as wide as on the first! Many members and competitors in the FCSA are women and many have distinguished themselves as excellent marksman having set world records on numerous occasions.
Cost of Big-Bore Shooting
Is owning and shooting a 50 BMG caliber rifle expensive? Relatively speaking yes, but one must put it into perspective. Rifles may run from $2500 to $7000, maybe even more for a top of the line custom rifle. A good scope will set you back $500 to $1500. And while excellent commercial ammo is available it runs from $3 to $5 a round. Most serious shooters start reloading for the rifle as soon as practical, not only for the economics of reloading but also for the ability to fine tune custom ammo for their specific rifle. It’s a very rare match that is won shooting commercial ammo. I recently compared the cost of my hobby — owning, shooting, and competing with the 50 BMG — with a friend whose hobby is snowmobiling. Factoring in the cost of equipment, licensing, gasoline, clothing, etc. it was soon obvious that my hobby was significantly less expensive than his.
Getting Started
 So how does one get started? You could do as I did, purchase a rifle not knowing what you were really getting into; or you could come out to a FCSA-sponsored event, shoot a number of different rifles, rub shoulders with those who have already taken the plunge, and see if this sport is right for you. While membership in the Fifty Caliber Shooters Association (FSCA) is required to compete at a FSCA event, membership is not required to come and experience first hand what is going on. If you have any inclination that you are interested in the extreme sport of long rang, big bore shooting then a year’s membership in the FCSA is only $60 ($20 for active duty military) a significant bargain if it helps you make just one well-informed equipment choice. In addition one of the primary functions of the FCSA is helping to identify active members near you who can help you understand just what is involved and help you ‘get your feet wet’ in this challenging sport.
Photos courtesy FCSA Photo Gallery.
Share the post "Care and Feeding of the 50 BMG — A Look at Big Bore Shooting"
October 19th, 2014
 Imagine this — your “home security” handgun is stored safely and securely near your bedside. But with the simple swipe of a keyfob, card, or wristband, you have instant access to the gun. Sound like science fiction? Well, this is real. Hornady’s new RAPID Safe uses RFID (Radio Frequency Identification) technology to allow instantaneous access to a firearm using either a special card, an RFID bracelet, or a special keyfob. In addition, the safe can be opened using a programmed keypad or a traditional key lock.
Brownells.com already has this new product in stock. Watch the video to see how the RAPID Safe works. The system runs with 110 volt AC power or internal battery pack. This short video shows various opening modes:
Open your safe in the blink of an eye. Simply place the included RFID bracelet, card, or key fob over the reader, and the RAPiD™ safe springs open to present your handgun.
Share the post "Hornady Handgun Safe Opens with RFID Signal"
October 19th, 2014
What would it be like to have a tracer round fly right past your eyeball? You’d never want to experience that in real life. But here’s an amazing short video that lets you see a “target-eye’s view” (POV) of an incoming tracer round. If you look carefully, you can actually see the bullet spinning (throwing off radial sparks) before it strikes the target.
Watch Incoming .22 LR Tracer Round:
YouTube shootist “22 Plinkster” placed a miniature video camera behind bullet-proof glass then fired a .22 LR tracer round right at the camera. With slo-mo playback, you can see the tracer leave the rifle barrel and fly directly at the camera, showing bright red sparks all the way. In this video, 22 Plinkster shoots a .22 LR tracer round at a camera protected by a layer of bulletproof glass. After the impact, there is a dark black crater left in the glass (lower photo).
Freeze Frame 1: Tracer Round Comin’ at You…
Freeze Frame 2: Tracer Round Milli-Seconds from Impact
Freeze Frame 3: Impact Crater on Bulletproof Glass Shielding Camera.
Share the post "Incoming! Video Shows “Target POV” of Rimfire Tracer Round"
October 19th, 2014
One of the CMP’s most popular competitions is the M1 Carbine Match. The little carbines are easy to hold and easy to shoot, with relatively low recoil compared to an M1 Garand or M1903 shooting the full-power .30-06 cartridge. Unfortunately, genuine GI-issue M1 Carbines are now hard to find at affordable prices. The CMP has announced: “CMP’S Carbine Inventory has been exhausted and we do not expect to receive any additional shipments.” Authentic, “all-original” M1 Carbines are going for $1500 to $1800.00 these days on Gunbroker.com.
CMP M1 Carbine Match at Western CMP Games
New Production M1 Carbines
Thankfully, you can now get a brand new, American-made M1 Carbine clone for hundreds less than an old CMP rifle. MKS Supply is now offering American-made Inland Mfg. brand .30-Caliber M1 Carbines that look, feel, operate and shoot just like the originals.
These made-in-the-USA, newly manufactured M1 Carbines are faithful copies of the original Inland Manufacturing carbines from the World War II era. (Inland was once a division of General Motors, but this is a new company with the same historic name.) They feature 1944-style peep sights and even include Arsenal cartouches on the stocks. All Inland M1 Carbine models come with a cloth sling and oiler resembling those given to GIs during WWII. MKS Supply will offer three (3) Inland M1 Carbine models:
M1 1944 wood stocked original design without bayonet lug — MSRP $1049.00
M1 1945 wood stocked original design with bayonet lug — MSRP $1049.00
M1A1 Paratrooper original design with folding heavy wire buttstock — MSRP $1179.00
NOTE: The new Inland carbines are so precisely copied from the original specifications that the company marks the underside of the barrel and the inside of the stock of these current models to prevent potential fraudsters from passing these new carbines as mint WWII originals.
GunsAmerica.com reporters recently compared new Inland M1 Carbines side-by-side with original vintage M1 Carbines: “We had to get in close to tell the difference. Overall, the two examples we were able to handle looked great and held up when next to the originals. The stampings are even close to correct with a few minor differences that were chosen to stop the new Inlands from being mistaken for originals. Take a look at the photos and see for yourself.”
CLICK HERE for GunsAmerica Article.
CMP M1 Carbine Matches — Growing in Popularity
The CMP M1 Carbine Match is part of the CMP Games program that already includes Garand, Springfield and Vintage Military Rifle Matches. “As-issued” U. S. Military M1 Carbines are fired over a 45-shot course of fire at 100 yards on either the old military “A” target (or the SR target, if A targets prove to be too difficult to obtain). The course includes 5 sighters and 10 shots for record prone slow fire in 15 minutes, a 10-shot rapid fire prone series in 60 seconds, a 10-shot rapid fire sitting series in 60 seconds and 10 shots slow fire standing in 10 minutes. An M1 Carbine Match was fired during the National Matches in the early 1950s, and now is back. As a CMP Games event, it also can now be conducted as a CMP-sanctioned competition.
Share the post "New American-Made Reproduction M1 Carbines"
October 19th, 2014
 One of our readers asked “What effect does altitude have on the flight of a bullet?” The simplistic answer is that, at higher altitudes, the air is thinner (lower density), so there is less drag on the bullet. This means that the amount of bullet drop is less at any given flight distance from the muzzle. Since the force of gravity is essentially constant on the earth’s surface (for practical purposes), the bullet’s downward acceleration doesn’t change, but a bullet launched at a higher altitude is able to fly slightly farther (in the thinner air) for every increment of downward movement. Effectively, the bullet behaves as if it has a higher ballistic coefficient.
Forum member Milanuk explains that the key factor is not altitude, but rather air pressure. Milanuk writes:
“In basic terms, as your altitude increases, the density of the air the bullet must travel through decreases, thereby reducing the drag on the bullet. Generally, the higher the altitude, the less the bullet will drop. For example, I shoot at a couple ranges here in the Pacific Northwest. Both are at 1000′ ASL or less. I’ll need about 29-30 MOA to get from 100 yard to 1000 yards with a Berger 155gr VLD @ 2960fps. By contrast, in Raton, NM, located at 6600′ ASL, I’ll only need about 24-25 MOA to do the same. That’s a significant difference.
Note that it is the barometric pressure that really matters, not simply the nominal altitude. The barometric pressure will indicate the reduced pressure from a higher altitude, but it will also show you the pressure changes as a front moves in, etc. which can play havoc w/ your calculated come-ups. Most altimeters are simply barometers that read in feet instead of inches of mercury.”
As Milanuk states, it is NOT altitude per se, but the LOCAL barometric pressure (sometimes called “station pressure”) that is key. The two atmospheric conditions that most effect bullet flight are air temperature, and barometric pressure. Normally, humidity has a negligible effect.
It’s important to remember that the barometric pressure reported on the radio (or internet) may be stated as a sea level equivalency. So in Denver (at 6,000 feet amsl), if the local pressure is 24″, the radio will report the barometric pressure to be 30″. If you do high altitude shooting at long range, bring along a Kestral, or remember to mentally correct the radio station’s pressure, by 1″ per 1,000 feet.”
You can do your own experimental calculations using JBM Online Ballistics (free to use). Here is an extreme example, with two printouts (generated with Point Blank software), one showing bullet trajectory at sea level (0′ altitude) and one at 20,000 feet. For demonstration sake, we assigned a low 0.2 BC to the bullet, with a velocity of 3000 fps.
Trajectory of Bullet fired at Sea Level
Trajectory of Bullet fired at 20,000 feet
if you want to learn more about all aspects of External Ballistics, ExteriorBallistics.com provides a variety of useful resources. In particular, on that site, Section 3.1 of the Sierra Manual is reprinted, covering Effects of Altitude and Atmospheric Pressure on bullet flight.
Share the post "How Altitude and Air Pressure Influence Ballistics"
October 18th, 2014
Frank Galli (aka “Lowlight”), the head honcho of Sniper’s Hide, has created a good 15-minute wind-reading video for the Scout web network. This video, a segment from the Sniper’s Hide Day One DVD, covers many of the important basics of wind reading. It’s a helpful introduction for those getting started in long-range rifle shooting.
Click Image to Go to Video Playback Page:
Quote 1: “On the range, people describe the wind as the Great Equalizer. Next to your drop, drift from wind is the second most important consideration for the long range precision rifle shooter. Unlike drop, which is predictable, the wind is a constantly changing factor.”
Quote 2: “Wind is like water. It’s important to understand how terrain will effect the wind, how it will change the direction, velocity and consistency. It’s responsible for turbulence, it’s responsible for unseen changes that will throw our shot off. Wind will ebb and flow just like waves crashing on the beach. We need to understand the frequency and velocity of each wave.”
CLICK HERE to Watch Wind-Reading Video.
Share the post "Video Introduction to Wind-Reading with Sniper’s Hide Boss"
October 18th, 2014
 In another month or two many Eastern and snow-belt shooting ranges halt operations for the winter. If you’re an avid rifleman who enjoys shooting regularly, the dark days of winter can bring withdrawal pains. The closure of outdoor ranges can mean months of forced inactivity… unless you have an all-weather indoor shooting solution.
Some clubs maintain their own indoor air rifle ranges where you can continue to shoot and train throughout the winter. If there are no such facilities nearby, Creedmoor Sports now offers a great solution for those who want to shoot indoors — even in your own basement or garage.
Creedmoor’s patented 10m Air Gun Range provides a target holder and a curtain-type backstop capable of stopping pellets with a muzzle velocity up to 600 fps. The target boxes can be positioned at various heights for prone, kneeling, and standing. Creedmoor says the hardened steel target boxes provide 100% containment for any pellet passing through the target.
The 10M Air Gun Range is available either in a 3-station configuration for $1514.00 (item 3AGR), or as a one-station (single-point) range for $325.00 (item AGR-SINGLE). Creedmoor’s Air Gun Range is a proven, heavy duty product — the only Air Rifle target system ever tested and approved by the U.S. Military. This system is currently being used in more than 600 schools nationwide, as well as the new CMP shooting facility in Alabama. The 3-station range easily dis-assembles for transport and storage, fitting inside a 34″ x 10″ x 8″ carry duffle.
The Portable Air Gun Range comes with a durable curtain/ backstop that sets up quickly and easily. The curtain provides ample stopping power for air pellets. However, this is NOT to be used with high-energy pneumatic hunting rifles (such as the .357 Benjamin Rogue) or rimfire or centerfire rounds. This is for standard airguns only. That could be a $100 Crosman, or a $3600.00 Model 9003 S2 Anschutz:
Share the post "Set Up Your Own 10m Indoor Air Rifle Range"
October 18th, 2014
While devotees of this site are hard-core accuracy addicts, who normally shoot tiny groups with sophisticated Benchrest and Varmint rifles, we should not overlook the pure fun of shooting a simple rifle at reactive targets.
Nailing a nice, tight 1/4-moa group is very satisfying. But for pure unadulterated shooting fun, it’s hard to beat a slicked-up “race-ready”, Winchester-clone lever gun. In fact, this editor’s favorite rifle for “fun shooting” is my 20″ Uberti Model 1866 “Yellowboy” Lever gun. Shooting light-loaded 38 SPL rounds at steel targets from a standing position offers old-fashioned shooting satisfaction. On the “fun meter” this tops the scale. My rifle features a slicked-up action and lightened trigger. After a “CodyMatic” action job by cowboy gunsmith Cody Conagher, my Yellowboy’s lever can be cycled with just one finger. Trigger pull is about a pound and a quarter. The high-gloss, blued octagonal barrel is very accurate and the mirror-finish bore cleans up easily.
Based on the Model 1866 Winchester, Uberti’s Yellowboy, and its Model 1873 “older brother”, feature a toggle-link action that is extremely smooth. The toggle action design also keeps the linkages separate from the chamber so the gun runs extremely clean. After firing a hundred rounds or more, all you need to do is wipe off the bolt and breech-face with some solvent and run a bore-snake down the bore a few times. To be honest, the Yellowboy is more fun to shoot at steel than my AR Carbine. And maintenance-wise, for every five minutes I spend maintaining the 1866, I’ll spend an hour detail-stripping and cleaning the AR. The shooting-to-cleaning ratio favors the lever gun by orders of magnitude.
These Italian-made Winchester clones are very handsome, with nicely figured wood under a durable clearcoat. You can polish the brass receiver to keep it shiny, or leave it alone to develop an authentic, dulled patina. Uberti’s Model 1873 features a steel receiver with gorgeous color case-hardening.
After the fun factor, what’s the best thing about Uberti lever guns? Resale value. I can sell my 1866 for quite a bit more than I paid for it. Over the past decade, the price of Italian-made Uberti lever guns has been steadily rising. This means that older rifles fetch a premium on the used market.
Share the post "Fun Gun for the Family? Try a Repro 1866 or 1873 Lever Gun"
October 17th, 2014
This past week, the Western CMP Games have been underway in Phoenix, Arizona. (The Creedmoor Cup matches continue through Sunday, October 19.) The CMP has just released a large collection of photos from the 2014 Western Games. Here are some of our favorites. You’ll find over 1300 more images from this week’s activities online. CLICK HERE to view all the 2014 Western CMP Games photos, organized by day, October 10 through October 14.
M1 Carbine Match was very popular.
There was some shade for the Rimfire Sporter Match, at least during the prone stage.
Eye, Ear, and Cranial (Sun) Protection
Vintage Sniper Rifle Match competitors try to keep cool
A Small Arms Firing School (SAFS) was conducted on Friday, October 10.
Checking out the line-up of M1 Garands at the CMP Sales tent.
Two competitors sported vintage U.S. Marine Corps uniforms. Semper Fi!
 
DCM Emeritus Gary Anderson demonstrates use of sling in military rifle clinic.
Share the post "Western CMP Games Gallery"
October 17th, 2014
Natchez Shooters Supplies just announced a major 3-Day SALE on big name reloading gear. Prices on high-quality RCBS, Redding, Hornady, Lyman, and MEC products have been slashed. But this sale runs for three days only — the deals expire 10/19/2014. (NOTE: we are not sure if this means end of day 10/19 or if the deals expire at 11:59 pm on 10/18 — be forewarned).
If you are in need of a reloading press, electronic powder dispenser, or a vibratory tumbler, this is a great opportunity to save some serious coin. For example, the RCBS Chargemaster, which sells elsewhere for $340.00 – $375.00, is just $289.99. That price is way lower than we could find elsewhere. CLICK HERE for Natchez SALE
CLICK graphic below to see larger version with more products:
Sale tip by EdLongrange. We welcome reader submissions.
Share the post "Big 3-Day Sale at Natchez Shooters Supplies"
|
