McRee’s Pre-Fit Barrel Option for Rems and Rem Clones — $412.50
Need a new barrel for your Remington-actioned hunting or tactical rifle? McRee’s Precision has you covered. McRee’s is now offering complete, no-gunsmithing re-barreling kits for Remington and Rem-clone actions. These feature a high-quality, pre-chambered “PRE-FIT” stainless barrel from Criterion, a Savage-style barrel nut, a recoil lug, and a special barrel-nut wrench. With this system you can easily re-barrel your favorite Remington rifle yourself in less than an hour. You don’t need to pay gunsmithing fees, or wait weeks (or months) for a busy smith to do the job.
McRee’s Precision Remington DIY Barrel Kit includes Criterion Pre-Fit Stainless Barrel, Barrel Nut, Recoil Lug, and Barrel Nut Wrench:
CLICK HERE for Barrel Specifications PDF Sheet
Right now McRee’s Precision is offering Rem-action Pre-Fit barrel packages (complete with barrel nut, recoil lug, and wrench) starting at just $412.50 (On Sale). Choose from four chamberings: .243 Win, .260 Rem, .308 Win, and .300 Win Mag. These Pre-Fit barrel kits are “100% complete and ready-to-install”. All you need to do is remove your current barrel, place the recoil lug, spin on the new tube, follow the instructions for setting head-space, then torque the barrel nut against the lug. NOTE: You may require a barrel vise and action wrench to remove the original barrel. Minor inletting changes may be needed forward of the action.
Product Tip from Ed LongRange. We welcome readers’ submissions.The folks at McRee’s Precision say their Pre-Fit system offers many advantages: “Remington Pre-Fitted Barrel Kits have become popular over the years. If Savage can do it, why not for our Remingtons? Our [Criterion-supplied] barrels are spec’d to the McRee standard of performance. We require a minimum of 0.5 MOA with good factory ammo and 0.2 MOA with quality handloads. There are several places to get the tools required to remove your factory barrel correctly. Once you have your barrel removed all you have to do is follow the normal Savage procedure to install your new barrel. We recommend that you contact your local gunsmith for the install. Feel free to call us with any questions.”
Similar Posts:
- The “REMAGE” Option — Pre-Fit Barrels for Rem 700 and Clones
- Pre-Fit DIY Barrel System for Remington-Type Actions
- Pre-Fit Barrel Kits for Remington and Rem-Clone Actions
- Remington Pre-Fit Barrels with Savage-Style Barrel Nut
- The “Remage” Option — Pre-fit Barrels for Rem-Type Actions
Share the post "McRee’s Pre-Fit Barrel Option for Rems and Rem Clones — $412.50"
Tags: Barrel, Barrel nut, Chambering, Criterion, Headspacing, McRee, McRee's Precision, Pre-Fit
“””barrels are spec’d to the McRee standard of performance. We require a minimum of 0.5 MOA with good factory ammo and 0.2 MOA with quality handloads.”””
Thats a bold accuracy prediction!!!
by chance do you make a pre fit kit for the Remington 788.
I couldn’t even begin to guess what their liability insurance premiums must be selling a product with so much potential for doing incorrectly
Hence go and no-go gauges.
Savage, and thousands of non-smiths, have been doing this for decades. Where’s the liability?
Good for them for allowing owners to swap bbls.