Around the nation, Tuesday, November 4 is Election Day. There are dozens of key Congressional seats up for grabs this year. In addition, important gun issues are on the ballot in many states. Remember, every vote counts — you can’t complain about local, state, and federal policies if you don’t bother to vote. We hope all our readers take the time to visit their local polling places tomorrow.
If you want to learn more about the upcoming election, and research the positions of candidates on gun rights issues, visit the NSSF’s GUNVOTE website. This resource highlights key U.S. Senate and House of Representatives races. The NSSF Election Guide allows you to browse state-by-state. There’s also a handy page with links to directories of local polling places for every state. So — do your homework and cast your vote tomorrow!
State Elections — Time of Reckoning for Hickenlooper?
In addition, the GUNVOTE site covers important Gubernatorial contests around the country. Here is a video about the Colorado Governor’s race. In 2013, Gov. John Hickenlooper signed tough anti-gun measures into law and has been trying to explain himself ever since. On Election Day, Colorado voters will decide whether Gov. Hickenlooper deserves another term in office.
Many of our readers use AR-type rifles for Service Rifle matches, varmint hunting, 3-Gun competition, or defensive use. AR-platform rifles can be configured in a multitude of ways to suit the application. But if you plan to put together your own purpose-built AR rifle, how do you get started?
For AR Do-It-Yourselfers, we suggest reading Glen Zedicker’s book, the Competitive AR15 Builders Guide. Following Zedicker’s New AR-15 Competitive Rifle (2008), the Builders Guide provides step-by-step instructions that will help non-professional, “home builders” assemble a competitive match or varmint rifle. This book isn’t for everyone — you need some basic gun assembly experience and an aptitude for tools. But the AR-15 Builders’ Guide provides a complete list of the tools you’ll need for the job, and Zedicker outlines all the procedures to build an AR-15 from start to finish.
Along with assembly methods, this book covers parts selection and preparation, not just hammers and pins. Creedmoor Sports explains: “Knowing how to get what you want, and be happy with the result, is truly the focus of this book. Doing it yourself gives you a huge advantage. The build will honestly have been done right, and you’ll know it! Little problems will have been fixed, function and performance enhancements will have been made, and the result is you’ll have a custom-grade rifle without paying custom-builder prices.”
The Competitive AR-15 Builders Guide is not available from most large book vendors. However, Amazon still has a few copies in stock. CLICK HERE to order.
Congratulations to James Crofts (F-TR) and to Emil Kovan (F-Open), our new 2014 F-Class U.S. National Champions. Crofts, F-TR Team USA Vice-Captain, won the F-TR Title with a 1574-59X score. Emil Kovan took the F-Open National Championship with a 1587-83X. Well done, gentlemen!
Battle of the Ages in F-TR Division
USA F-TR teammates James Crofts and Derek Rodgers entertained all with a 3-day battle that will be remembered for many years to come. James Crofts took home the title of US F-TR National Champion by just one point, scoring 1574-59X to Derek’s 1573-65X. These two great shooters, both at the top of their game, were neck and neck right down to the final shot. Rodgers had the higher X-Count but fell just one point short. He was shooting Berger 200gr Match Hybrid bullets with Varget powder. Crofts was also shooting heavy .30-caliber projectiles.
The battle between James Crofts (left) and Derek Rodgers (right) went down to the wire.
In the F-TR Division, William Litz was third with 1563-58X. Brad Sauve, 3-Time National Champ, was close behind, with 1563-54X, to finish fourth in a very high-scoring event.
James wanted to give credit to others who helped him along the way: “There are a lot of people that I need to thank that have helped me in my quest to become the U.S. National Champion, twice. First, I thank my family for giving me there unconditional support throughout it all. Second is Ray Bowman of Precision Rifle and Tool, he builds the best F-Class rifles in my opinion hands down. The rifle I used was the second F-TR rifle Ray has built for me. Thank you Ray.
Next, [I want to thank] all my teammates from the NorthState X-Men: Phil Kelley, Tracy Hogg, Joseph Conley, Mike Hardy, Ian Klemm and Radoslaw Czupryna. Your quest for perfection and determination make us all better and it is my honor to be your coach and captain.
Last [I want to thank] all my team mates from F-TR Team USA — thank you all. I just hope I can represent our growing sport in a positive manner. — James E Crofts, 2012 and 2014 F-TR US FTR National Champion
Congratulations to all those who participated in the 2014 F-Class National Championship. There were many superb performances at this event, and new National individual and team records were set in Phoenix this past week. F-Class continues to grow in popularity, and with each passing year, the standard of precision improves, and the competition gets tougher.
Medal photo by Shiraz Balolia, Captain of Team Grizzly, winners of the F-Open Team Championship.
We are in the thick of hunting season. If you need to re-zero your favorite deer rifle, here is a dead-simple way to zero your rifle in two or three shots. The method is based on the principle of moving your cross-hairs to the point-of-impact (POI) of your first shot. You’ll need a good set of rests that will hold the gun steady while you (or a buddy) clicks the scope.
After bore-sighting, fire one round at the center of the target. Then place the rifle so the center of the cross-hairs is exactly on your original point of aim. Next, without disturbing the gun in any way, dial your turrets so that the center of the cross-hairs moves over the center of your group. That’s it. You’re now zeroed. Having a helper steady the gun as you click the turrets will make this “no-math” method work more effectively.
Click-to-Initial POI Zeroing Method Demonstrated
Simple Sight-In Procedure Put the center of your cross-hairs on the target and take one shot. Then reposition the rifle in your bags so the center of the reticle is back on the center of the target. Make sure the rifle is secure in this position (have a friend hold the rifle if necessary). Now, using your elevation and windage knobs (while looking through the scope), simply click the center of the cross-hairs to the middle of the bullet hole — without moving the rifle. You are moving the center of the reticle on to the bullet hole. Take a second shot. The second bullet hole should now be in the center of the target. Repeat the process if needed with a third shot. This procedure works at any distance.
There have been some remarkable team performances at the 2014 F-Class Nationals. With good conditions, talented shooters, and ultra-accurate rifles, three teams have “raised the bar” with record-breaking performances this week in Phoenix.
Team Long Shots Breaks Records with 800-42X Score at 1000 Yards
Congratulations to the Long Shots rifle team for breaking the 80-shot, 1000-yard, F-Open Civilian and Open Team Match National Records with a score of 800-42X. That is amazing shooting! Give credit to Michelle Gallagher, David Bailey, Ken Dickerman, David Gosnell, and Mark Walker.
Michelle Gallagher (as Snow White) on Halloween with her four team-mates.
Team Grizzly — F-Open National Champions
Shiraz Balolia reports: “Team Grizzly just won the F-Open National Team Championship. This is the third major match that Trudie Fay has coached four shooters into winning. She was also our coach when she coached us to a win at the last National Championship in Raton, and then again in February this year (2014) when we set a new National record in the Palma course in Phoenix at 800, 900, and 1000 yards. Trudie is a heck of a wind reader!” Shooters are: Kenny Adams, Shiraz Balolia (Captain), Emil Kovan, and John Myers.
Team Sinclair — Six-Time National F-TR Champions
Ray Gross Posted: “I just got home after the Team Sinclair victory dinner… teammate Derek Rodgers set a new 1000-yard national record Wednesday, then beat it for a new, higher, record Thursday. Then we won the team National Championship today and set a new National Record doing it! We are ‘stone cold’, 6-time National Champions. I’m proud to be a part.”
NEW PRODUCT REPORT by Dennis Santiago
At the recent Western CMP Games and Creedmoor Cup Matches in Phoenix, I received a box of the all-new .30-06 Match-Grade ammunition from Dennis DeMille of Creedmoor Sports. My job was to test the ammo (at the Games) and write about it. This box was part of Creedmoor’s 3-million-round production run for the Civilian Marksmanship Program (CMP). CLICK HERE for Ammo Sales.
Author Dennis Santiago (right) with Dennis Demille of Creedmoor Sports (left).
The new .30-06 “Match-Grade” ammunition from Creedmoor is impressive. This ammo is made from top-quality components: brand new Lapua .30-06 brass and 167gr Lapua Scenar bullets. The ammo, optimized for 200-yard CMP Games tournaments, runs at 2720 fps. DeMille says the Standard Deviation (SD) is very tight with this ammo — comparable with precision hand loads. The low SD reflects great attention to detail in ammo assembly. Creedmoor’s industrial loader is run at half-speed to improve consistency. Charges are thrown precisely — I believe in two (2) half-charges.
When you hold the ammunition up to the light, each round appears a perfect clone of each other round — something that cannot be said for some other factory ammo (even so-called “match ammo”). This is about a close as one is likely to get to a precision hand load. The good news is that Creedmoor plans to produce similar ammunition in other chamberings.
The economics of the ammunition are equally intriguing. This ammo is being sold by the CMP for $1.30 per round. Think about that — new .30-06 Lapua brass sells for around $100.00 per hundred cases. So, you get to fire a precision match round for about 30 cents and have premier once-fired brass for future use. The price per rounds tells me that CMP isn’t making money on this — it is being sold at near cost to promote marksmanship.
Great Ammo at a Great Price
In offering this new .30-06 ammo at an affordable price, the CMP is making it possible for non-reloading competitors to have the same quality of ammunition as those who handload with premium components. This will be a major improvement for shooters of m1903s and M1 Garands. I think this ammo can be real equalizer for those who do not currently hand-load their own .30-06 ammunition. The CMP and Creedmoor Sports are to be commended for collaborating on this game-changing product introduction.
Where to get the Creedmoor Sports CMP .30-06 Ammo
The CMP is now selling the Creedmoor-produced .30-06 ammo on the CMP website, item #4C3006CS167-100 (click the “e-Store” button to launch shopping cart). The retail price is $130.00 per 100-round case (i.e. two boxes). That works out to $1.30 per round.*
.30-06 Ammo Performance
When someone hands you a box of ammo with a challenge how can you not throw all your match plans out the door and play? I was planning to fire the CMP GSM match with my M-1 Garand the next day using 150gr SMK handloads but I said, “What the heck. Let’s go for it.” You get five sighters in a GSM match which is plenty to zero with new ammo.
The ammo is optimized for shooting 200-yd CMP matches with rifles like my as-issued DCM M-1 Garand.
I shoot the M-1 Garand matches with a rebuilt 5-digit receiver gun with a 1950s barrel refurbished at Anniston Armory that I got from the DCM back in the day when the postman delivered them. It shoots true and has garnered its share of Western Games trinkets over the years including a number of golds and one of those coveted M-1 EIC 4 points medals. It’s a good platform for the test. Sighters revealed the Creedmoor ammo shoots about two minutes higher impact versus my pet load. The tale of the tape said 96-2X slow prone, 93-1X rapid prone and 81-1X offhand totaling 270-4X. The DCM machine took home a bronze in 2014.
Accuracy and Consistency
This Creedmoor ammo is indeed amazingly consistent. The slow prone stage was a pure joy to shoot. This ammunition is “brutally honest”. It will reveal every little error you make be it defocusing on your front sight drenching in sweat under the Phoenix sun, not being fast enough to reset your NPA mid-string in your rapid as the big gun moves you around or just being jittery on your feet during the back half of your offhand. With this ammo I felt confident to trust that any error was mine after each shot. There was no wondering about the ammo. I knew its feedback was accurate. That is a huge thing to be that confident in one’s gun and ammunition. I never felt that confident with HXP or even my handloads. If anything, I now know that even my ammo for the M1 Garand and M1903A3 will benefit from the same careful case preparation and assembly as my tactical rifle or long range ammo.
*At the Western CMP Games this Creedmoor .30-06 ammo was sold at a discounted price of $1.15 per round. That’s an example of the great deals one can get by attending CMP competitions.
Are you looking for some outdoors-oriented reading material? Do you enjoy classic hunting adventures from around the globe? Then log on to the NitroExpress.com Forum. There you’ll find links for literally hundreds of vintage hunting stories, and even complete books, such as Teddy Roosevelt’s classic African Game Trails and Good Hunting, plus the wonderful book African Campfires by Stewart E. White, one of Roosevelt’s close friends and hunting companions.
Among the downloadable titles are The Man-Eating Lions of Tsavo (leaflet edition) by Lt.Col. J. H. Patterson, the true tale that inspired the Hollywood movie, The Ghost and the Darkness, staring Michael Douglas and Val Kilmer. The online version of the Man-Eaters of Tsavo book (right) is a shorter, 140-page edition created for Chicago’s Field Museum, which purchased the skins of the lions from Patterson and put them on display.
RifleShooter online magazine has published a list of the Ten Best Bolt-Action Rifles of All Time. Ten classic rifle designs (including the Remington 700 and Winchester Model 70) are illustrated with a paragraph or two explaining their notable features.
These Top 10 lists are always controversial. While most readers might approve of half the entries, there are always some items on the Top 10 list that some readers would challenge. Here is RifleShooter’s Top 10 list. What do you think? Are there some other bolt-actions that are more deserving?
1. Springfield M1903
2. Mauser 98
3. Winchester Model 70
4. Remington Model 700
5. Weatherby V
6. Sako L61/AV
7. Savage Model 110
8. Ruger M77
9. Tikka T3
10. Mannlicher-Schonauer
Can sustained rapid-fire shooting with no cool-down period wear out a quality barrel more quickly? The answer is “Yes” according to Forum member LCazador, who recently did an interesting comparison test with two .243 Win barrels. He started off with two, identical, match-grade HV taper stainless barrels. Both were NEW at the start of testing, and LCazador shot the same load through each: 95gr match bullets with 38 grains of Hodgdon Varget. After giving both barrels the same, gentle 20-round break-in, 300 rounds were then fired through each barrel — in very different ways. Barrel condition and wear were monitored with a borescope.
Barrel One — Slow Fire, Cool Down Periods, Cleaning Every 50 Rounds
At the end of the 300-round test, Barrel One looked brand new. There was none of the severe fire cracking found in Barrel Two. This barrel was shot no more than 10 times without a cool down and firing was done at a much slower pace. Cleaning for this barrel was done every 50 shots.
Barrel Two — Fast Firing, No Waiting, Cleaning Every 100 Rounds
The second barrel, which received hard use and minimal cleaning, was severely damaged with severe fire cracking at the leade and throat. As a result, the barrel had to be re-chambered. This barrel was shot 100 rounds at time without cleaning and was shot up to 20 times in succession without a cool down.
Don’t let your barrel get too hot, and keep it clean. One afternoon can ruin a barrel!
Monitoring Barrel Wear with Borescope
Some folks worry too much about what their borescopes reveal — many barrels do not have to be “squeaky clean” to perform well. In fact some barrels run better after ten or more fouling shots. However, a borescope can be very helpful when your barrel starts losing accuracy for no apparent reason. Forum member FdShuster writes:
“A borescope is a positive way of backing up your suspicions when the rifle starts to throw an occasional (soon followed by more frequent) wild shot. Using the scope is also an excellent way to determine that the cause is barrel wear and not simply a need for a concentrated cleaning session to remove built up copper and more importantly, carbon fouling.
I’ve had a few barrels that gave every indication of being shot out. But I ‘scoped them out and found the cause to be nothing more than requiring a good cleaning. They then returned to their usual performance. There’s no guessing involved when you are able to get ‘up close and personal’ using the scope. The borescope also provides an excellent view of the all-important condition of the crown. My borescope is one of the most valuable investments I’ve ever made.”
Readers often ask us: “Is there an inexpensive way I can get started in position shooting?” The answer is “yes” — across the country CMP-affiliated clubs host Rimfire Sporter matches. You can use a wide variety of .22LR rimfire rifles — manual actions (such as a Winchester model 52) or semi-automatics (such as a Ruger 10/22). There are prone, sitting/kneeling, and standing stages. CMP rules provide separate classifications for scoped rifles, open-sighted rifles, and aperature-sighted rifles. The matches are fun, the ammo is inexpensive, and everyone has a good time while improving their marksmanship.
Our friend Dennis Santiago recently helped run a CMP Rimfire Sporter Match in Southern California. Dennis reports: “You want something challenging? Well that X-Ring 50 yards away is the diameter of a 50 cent piece, and there are people out there that can womp that thing with iron sights.”
The rapid-fire sitting or kneeling stage of a CMP-sanctioned .22 Sporter Match consists of two, 5-shot strings. A manually-operated or semi-automatic rifle may be used for this match. Below is a video Dennis made that shows a sitting/kneeling rapid fire stage.
Dennis notes: “There are six (6) stages of fire on a tough little target. Notice the rifles that can be used run the gamut from pump and bolt actions to variations on the semi-auto theme. All still require a good eye and a steady hold to earn one’s bragging rights for the day. A match takes about an hour and a half per relay. The slowest part of the match is initial sighting in. It’ll take longer than the allocated 5 minutes for the typical first timer coming to a club match.”
At Dennis’s Burbank Rifle & Revolver Club (BRRC), procedures are modified a little bit: “What we typically do at BRRC is run two relays. Experienced competitors shoot per the full rulebook. New shooters are afforded a bit more relaxed environment to make the experience more fun and inviting. We do the same thing in our M-1 Garand Clinic/Match series.”
Rimfire Sporter Match Basics
The CMP Rimfire Sporter Rifle Match is an inexpensive, fun-oriented competition using .22 caliber sporter rifles (plinking and small game rifles) commonly owned by most gun enthusiasts. To compete, all you need is a basic rifle, safety gear, and ammunition. No fancy, high-dollar rifles are required.
The event is shot with standard sporter-type, rimfire rifles weighing no more than 7 ½ lbs, with sights and sling. Rifles may be manually-operated or semi-automatic. Shooters with manually-operated actions are given extra time in the rapid-fire stage to compensate for the difference. (See Video).
There are three classes of competition — the standard “O Class” for open-sighted rifles, “T-Class” for telescope-sighted and rear aperture-sighted rifles and “Tactical Rimfire” class, which is a .22 caliber A4 or AR15 style rifle. Firing for all classes is done at 50 and 25 yards on a target with a 1.78″ ten-ring and an 18″ outer one-ring. Even new shooters can get hits on this target, but it’s still tough enough that no one yet has fired a perfect 600×600 score.
The Civilian Marksmanship Program (CMP) has a CMP Guide to Rimfire Sporter Shooting. This FREE, 50-page digital publication covers equipment, positions, course of fire, rules, scoring and much more. You’ll find helpful “how-to” sections on aiming, sight picture, hold control, and trigger control. Reading these instructional sections can benefit any prone or three-position competitive shooter.
Many of our readers use AR-type rifles for Service Rifle matches, varmint hunting, 3-Gun competition, or defensive use. AR-platform rifles can be configured in a multitude of ways to suit the application. But if you plan to put together your own purpose-built AR rifle, how do you get started?
Put the center of your cross-hairs on the target and take one shot. Then reposition the rifle in your bags so the center of the reticle is back on the center of the target. Make sure the rifle is secure in this position (have a friend hold the rifle if necessary). Now, using your elevation and windage knobs (while looking through the scope), simply click the center of the cross-hairs to the middle of the bullet hole — without moving the rifle. You are moving the center of the reticle on to the bullet hole. Take a second shot. The second bullet hole should now be in the center of the target. Repeat the process if needed with a third shot. This procedure works at any distance.
Among the downloadable titles are 
Monitoring Barrel Wear with Borescope
Our friend Dennis Santiago recently helped run a CMP Rimfire Sporter Match in Southern California. Dennis reports: “You want something challenging? Well that X-Ring 50 yards away is the diameter of a 50 cent piece, and there are people out there that can womp that thing with iron sights.”
