|
|
February 24th, 2014
Looking for a high-quality fiberglass stock at a bargain price? Then check out the Kelbly over-run stocks at PMA Tool. You’ll find a wide variety of stocks on sale at extremely attractive prices (from $200 to $350.00). There are 3″-wide benchrest and F-Class stocks, Hunter Class benchrest stocks, and a variety of general-purpose hunting and varmint stocks. Most of the benchrest stocks are priced at $300.00 to $350.00 — that’s hundreds less than you’d ordinarily pay for a first-tier fiberglass stock from McMillan or other big name manufacturer.
And price isn’t the only attraction. With these Kelbly over-run stocks, there is no waiting. PMA Tool can ship you out a stock in a matter of days. By contrast, you might wait months to get a newly-made stock from another maker. PMA Tool has acquired dozens of Kelbly stocks so there is a large selection. If you go to the PMA website, you can select from three categories of stocks. Then choose a stock that has the appropriate inlet for your action. Some of the over-run stocks are inletted for Pandas, others for BATs, and some for other round actions.
February 23rd, 2014
Larry Bartholome (aka “LBart” on our Forum) is the current F-Open USA National Champion. He also won the F-Open division at the recent Berger Southwest Nationals. A “Senior Citizen” now, Larry is still at the top of the F-Class game. If you were to pick the top ten F-Open shooters on the planet, Larry would be on the short list, that’s for sure.
In a recent AccurateShooter Forum thread, there was a discussion of caliber/cartridge choice for F-Open shooting — specifically whether 6mm cartridges can be competitive at long-range (as opposed to mid-range).
Larry, who currently shoots a 7mm-270 WSM, offered some wise words. Here’s some sage advice from Larry, a champion who has triumphed at the highest level, against the toughest competition. F-Class competitors will benefit from reading what Larry has to say, and taking it to heart:
Cartridge Choice for F-Class — What Really Matters
Matches are won with what people decide to shoot. The people win matches, not the calibers. A person makes his decision on what he is going to shoot with and [that person] wins or loses based on the decision.
The smaller cases and bore sizes have advantages in less recoil and more inherent accuracy. They are easier to shoot well. Because they shoot smaller groups on average they make the 10 ring seem bigger. With light winds that helps.
When the wind gets to changing and picking up this advantage is negated by the wind drift advantages of the larger calibers. Once the switches and velocity changes get beyond the mind’s ability to stay up with them, the small caliber advantage is minuscule.
My own thought is I need all the help I can get. I know I can’t read the wind. I play the percentages. [My 7mm offers] good grouping, good wind drift, lower recoil than the 30s. My 7mm/270 WSM was shooting very well in Phoenix, just as the other Bartlein barrels shot well in Raton. The points lost were mine, not the rifle’s or the caliber.
When the wind flags and mirage are telling you to hold left and your bullets are going left, no caliber in the world will help you. You are the one steering those bullets.
Larry Bartholome
Team Berger/Norma
February 23rd, 2014
Every serious hand-loader should have at least one high-quality set of calipers — a serious tool that can reliably (and repeatably) measure to .001″ (and preferably, .0005″). Quality calipers made by Starrett, Mitutoyo (and other good manufacturers) aren’t cheap, but they will work well for decades.
In addition to the quality calipers you keep at home, every shooter have a “range kit” caliper set. This can be used to quickly measure Cartridge OAL, check base-to-ogive lengths of loaded ammo (with a comparator placed on the jaws), measure group size, and perform a myriad of other tasks at the range. You don’t want to spend a fortune on your range calipers — in the event that they are inadvertently left behind (or loaned to a fellow shooter and never returned).
Right now, Midsouth Shooters Supply is selling Electronic Digital Calipers for under $10.00 that fill the “range kit” role very nicely. Constructed with carbon fiber components, these Altraco calipers are light-weight and rust-resistant. Measurements are displayed in large, easy-to-read, high contrast numbers. And with the flick of a button you can switch between English (inch) and Metric (mm) read-outs. For $9.66 these are a bargain “back-up” set of calipers to be kept in a glove compartment or range kit. No they will not replace your Mitutoyo calipers, but you won’t cry if they get lost!
February 22nd, 2014
 Have some spare time on your hands? How would you like to read four YEARS of American Rifleman Magazine back-issues for FREE? That’s right, the past four years of the NRA’s popular magazine are available online in eZine format — and all the content is free. Just visit the American Rifleman Magazine Archive. You don’t need to be an NRA member, or pay for a subscription. The 2013, 2012, 2011, and 2010 archives are FREE. (NOTE: the most recent issue in this format is May 2013).
The eZine version of American Rifleman navigates like a conventional print magazine — so you start with an index at the front and you can flip pages from front-to-back. You can also navigate with thumbnails (on the left) and zoom in and out if you find items of interest. Those who prefer reading articles in a magazine-style format should enjoy the American Rifleman digital eZine archives.
 How to Find Back Issues
After loading the eReader, to access back issues, click on the “Archive” icon in the upper left corner of the page, then chose a year (2013, 2013, 2011, or 2010) and then click on a particular issue. Here are samples from the March, April, and May 2013 digital editions of American Rifleman. As you can see, you can view full two-page spreads, just as with a print magazine. You can navigate by flipping pages, or by clicking on the thumbnails in the left column:
From May 2013 Issue (This issue also has articles about WWII rifles.)
From April 2013 Issue (Includes New Products for 2013.)
From March 2013 Issue (This Optical Glossary is extensive and useful.)
February 22nd, 2014
If you have a spotting scope, and a smartphone, you can now be a long-range videographer. One of the great things about digital cameras and smartphones is that, with a simple adapter, they can easily capture video through a spotting scope. This way you can record a string of shots on a target, or a shot on a game animal, or even record mirage for later review and study. Video can be a great training tool, and it’s also fun to record adventures at the range or on a hunt.
Digiscoping adapters hold your camera or smartphone at a fixed position, allowing the camera lens to faithfully record the view through the spotting scope’s eyepiece. Such set-ups work surprisingly well, and most are quite affordable. Phone Skope makes a Universal Digiscoping Adapter for iPhones. Able to adjust to different eyepiece diameters, this unit works with a variety of spotting scopes.
If you have a Swarovski spotting scope, and an Apple iPhone 5/5s, you’re in luck. Swarovski just released a new digiscoping adapter for the latest generation of iPhones. This can be used with a Swaro spotter or other brand of spotting scope with the same eyepiece diameter.
Along with iPhone adapters, Swarovski makes a variety of adapters for mounting digital cameras. Swarovski shows how to use these camera adapters in a “how-to” video (see below). One of the many tips in the video concerns focus. Many people attach the camera or iPhone and then forget to focus the spotting scope properly. Swarovski’s experts say you should focus in two steps: 1) set general focus; then 2) focus very precisely on the particular object (or surface) of primary interest.
Video Tip from EdLongrange. We welcome reader submissions.
February 22nd, 2014
If you are looking for a premium-quality hunting scope, with a wide magnification range, here is a great opportunity. Leica has just discontinued the Leica ER Scope Series. These are excellent optics that will be sold on “close-out” basis through EuroOptic.com. These Leica ER Scopes will be offered by EuroOptic for as much as $600.00 off the regular price, with target turret models available for as little as $1179.00. These scopes all include Leica’s Lifetime Warranty. According to EuroOptic: “Quantities vary and there will not be any more once they are gone”.
Leica ER Rifle Scopes are rugged, bright, and precise. Each Leica ER Rifle Scope is designed for field use, with a long tube for easy mounting and eye relief to spare – perfect for large caliber hunting rifles. Choose from the Leica ER 2.5-10×42, an all around scope with a wide field of view for quick acquisition, or the Leica ER 3.5-14×42, a higher magnification scope with an optional ASV elevation turret.
Leica ER 2.5-10×42 Riflescopes | Leica ER 3.5-14×42 Riflescopes | Leica ERi Riflescopes
February 21st, 2014
Most F-TR rifles are essentially prone rifles adapted for use with bipod and rear bags. They feature prone or tactical-style stocks designed to allow a firm grip on the gun, with cheek, hand, and shoulder contact. This has worked very well. Unquestionably, a skilled F-TR shooter can achieve outstanding scores with such a configuration — it works. However, “there’s more than one way to skin a cat”.
At the Berger Southwest Nationals, Eric Stecker introduced a new type of rifle, and a new type of gun-handling, to the F-TR ranks. Shooting “free-recoil” style* (i.e. with virtually no contact on his rifle) Eric managed to finished second overall in F-TR (with the highest X-count), beating some past national champions in the process. Thinking “outside the box” worked for Stecker in Phoenix. The success of Eric’s benchrest-style rifle and shooting technique definitely drew the attention of other F-TR shooters.
Click photo to zoom
|
VOICE FILE: Eric Stecker Talks About the SWN and his Radical F-TR Rifle. |
Eric’s F-TR rig was built by John Pierce using a stiff, light Scoville carbon-fiber stock. The stock is so light that Eric’s rifle came in 1.5 pounds under the F-TR maximum weight limit (8.25kg or 18.18 pounds). The gun features a Pierce action, Bartlein barrel, Jewell trigger, and a Gen 1 Nightforce 15-55X52mm Comp scope. From the get-go, Eric’s strategy was to “aim small” and shoot his rig like a bench-gun. He actually focused on shooting really small groups rather that just trying to keep shots within scoring rings and “hold waterline”. With a .308 Win that could shoot bugholes at 100 yards, this strategy paid off.
 Rifle builder John Pierce explains the thinking behind this rifle: “The stock choice was mine — I had built two prototype rifles last year based on the premise that the game is Benchrest in the prone position. I still feel very strongly regarding [this concept]. I chose Bob Scoville for obvious reasons — he is an artisan and his stocks have won so much, they just flat work. We built Eric the latest configuration along these lines, and the tool worked for him. Without a doubt, Eric is a shooter, and we were all pleased to watch him perform so well.”
Eric sets up rifle before match. During live fire his hands do not contact the stock.
Eric employed a benchrest-style shooting technique with his F-TR rig — he shot pretty much free recoil, with no cheek pressure, no hand contact, and just a “whisper” of shoulder contact. Eric explains: “I shoot what’s called ‘free recoil’. Now the rifle is butted up against my shoulder very lightly, but no other part of my body touches the rifle except for my finger on the trigger.” Eric has even used this technique when shooting a 7mm cartridge in F-Open at other matches: “Someone suggested that this style wasn’t possible with the larger [7mm] cartridges, but I found it very successful so I continue to do it that way.”
|
VOICE FILE: Eric Stecker Talks About Shooting F-TR with Benchrest Technique. |
Eric also employed an unconventional strategy — he was focused on shooting small groups (not just holding ring values): “Since I have started shooting F-Class, I treat [the target] like a benchrest target. What I mean by that is that I regard the center as my first shot, and so my objective is to create the smallest group. So, I will hold whatever… is required to end up with the bullet ending up in the center — that’s probably true of any F-Class shooter, but I guess the perspective’s a little different when you have a benchrest background.” Eric explained that “maybe I aim a little smaller than others might”, because in the benchrest game, “the slightest miss ends up costing you quite dearly”.
Click to Zoom Photo (This is not Eric Stecker’s rifle, but a “sistership” built by John Pierce.)
Eric Talks about F-TR Trends
Will other F-TR shooters build rifles suited for free-recoil-style shooting? Eric isn’t sure: “I don’t know if this type of rifle is the future of F-TR. I shoot a lot of benchrest, so putting those kinds of components into an F-TR gun made a lot of sense to me. One thing I like about F-TR is that there are a lot of different types of approaches being tried and some of them are successful. So I think it’s still pretty wide-open[.] But I think the really great part of what we found at the Southwest Nationals is that shooting [with] a benchrest-style approach certainly doesn’t hurt you. What I mean by that is … aiming small, trying to make the group as tight as possible rather than trying to hit a particular area. I actually tried to shoot tight groups — that was a focus and that worked for me — I had quite a high X-Count.” NOTE: Eric finished with 51 Xs, 14 more than F-TR Grand Agg winner Radoslaw Czupryna (37X). James Crofts had the second highest X-Count with 48 Xs.
Even Berger’s Boss did pit duty at the Berger SW Nationals.
*”Free Recoil” style shooting has its variations. Some would say “pure free recoil” would not even allow shoulder contact. Eric Stecker lightly touches the back of the stock with his shoulder.
February 20th, 2014
Here at AccurateShooter.com we tend to focus on highly-accurate (1/2-MOA or better), custom-built bolt-action rifles. But for home defense, deer hunting, or just having fun with the grand-kids, factory-built firearms serve their purpose. With that in mind, we wondered, “Just what are the most popular mass-production firearms these days?” To get a complete answer you must consider both new AND “previously owned” sales figures. Gunbroker.com, the biggest firearms auction site, recently tallied the top-selling firearms in various categories. Below we present Gunbroker’s January 2014 “Best Sellers” among rifles and pistols.
Some things we expected — the Rem 700 is the top-ranking bolt-action rifle, and the Ruger 10/22 was the leading semi-auto rifle. But in the pistol rankings, there were some surprises. Despite being out of production, the Colt Python is the best-selling revolver. Why is an out-of-production gun a top-seller? First, high-grade Pythons are actually increasing in value, making this “snake” a good investment. Pythons are also highly accurate, beautifully-finished revolvers with superb triggers. These qualities make the guns highly desirable to serious shooters as well as collectors.
Top-Selling Firearms on Gunbroker.com
| Bolt-Action Rifle |
Semi-Auto Rifle |
Single-Shot Rifle |
Lever Rifle |
|
1. Remington 700
2. Winchester 70
3. Ruger 77
4. Ruger American Rifle
5. Ruger M77 |
1. Ruger 10/22
2. Smith & Wesson M&P
3. Ruger Mini-14
4. Kel Tec Sub 2000
5. Springfield M1A |
1. Ruger No. 1
2. T/C Pro Hunter
3. Winchester 1885
4. T/C Encore
5. Browning 1885 |
1. Winchester 94
2. Winchester 1894
3. Marlin 336
4. Marlin 1895
5. Marlin 1894 |
| Semi-Auto Pistols |
Revolvers |
Single-Shot Pistols |
|
1. Smith & Wesson M&P
2. Sig Sauer P226
3. Sig Sauer P238
4. Glock 42
5. Colt 1911 |
1. Colt Python
2. Smith & Wesson 686
3. Ruger Blackhawk
4. Smith & Wesson 629
5. Ruger GP-100 |
1. T/C Contender
2. Remington XP-100
3. T/C Encore
4. Bond Texas Defender
5. Colt Derringer |
Colt Python (Royal Blue) — An Appreciating Asset
February 19th, 2014
Want to get great gear for rock-bottom prices? Then visit www.Shooters-Supply.com. After 25 years Russ Haydon is retiring, and closing down his shooting supplies business. Virtually all remaining inventory is now 25% off (through the end of February). Much of the merchandise is being offered “at cost”. Call (253) 857-7557 for more information.
Russ Haydon’s Shooter’s Supply — A Quarter Century in Business
A quarter century at a single job is a good, long career for anyone, but even more so when it has been as the head of your own successful small business. Such is the case for Russ Haydon of Russ Haydon’s Shooters’ Supply. Russ is retiring after 24+ years of selling high quality precision shooting products to benchrest, target and varmint shooters. Now Russ and Marsha are moving toward another of life’s milestones, retirement.
Russ and Marsha Haydon Say “Thank You” to Their Customers:
 Russ’s operation grew out of a life-long passion for shooting. Like so many youngsters, he started plinking in junior high and was always a good shot. He pursued his interest through brief employment in a gunshop and later competitive smallbore and benchrest shooting, but always as an aside to his regular job. With the support of his wife Marsha, Russ turned his firearm hobby into a fulltime business. More than once Russ has been complimented on his “candy store” gunshop called Russ Haydon’s Shooters’ Supply.
The predominantly mail-order business became widely known through magazine ads and word-of-mouth in the early 1990s. The advent of the internet added an international clientele for Haydon’s reloading products geared to high accuracy shooters. The Haydons have built a reputation for trustworthiness based on their fast, friendly, knowledgeable service.
With the operation winding down, nearly all inventory is being sold at 25% off the regular low prices. The website, www.shooters-supply.com, is continuously updated to display only in-stock items.
Of particular note is the remaining selection of Redding threaded dies and L.E. Wilson hand dies in various calibers and styles. At 25% off, the prices are near wholesale level. Other great buys are: Butch’s Bore Shine cleaning solvent, Sweets copper remover, and Dewey cleaning rods.
The rock-bottom prices are a means for Russ & Marsha to close out their inventory while saying “Thank You” for the many years of patronage of their business by the shooting public.
February 19th, 2014
The U.S. Marine Corps Scout/Sniper Association (USMC SSA) assists active-duty Marine Corps Scout Snipers and their families and the organization provides educational assistance to surviving dependents of the Marine snipers lost in combat. To further these ends, the USMC SSA is having a raffle with a prize package worth $12,000.00+. The main element of the prize is a .308 Win Surgeon Rifle in an Accuracy International AX AICSM40 Chassis.
For just $10.00 you can purchase a chance at winning this prize, a rifle and accessory package valued at over $12,000.00. You can purchase tickets online via a secure page on the U.S. Tactical Supply website. The Raffle drawing will be held March 17, 2014 (3/17/2014). That’s not far off, so act soon if you want to help this worthy cause.
CLICK HERE to Purchase Raffle Tickets ($10.00 each)
Raffle Prize Includes:
1. Surgeon Rifles – 591 Action SN#1775, with 24″ Krieger Barrel MTU Contour 1:10″ twist, 5R rifling, and Jewell Trigger set at 2.75 pounds.
2. U.S. Optics – LR-17 Mil 3.2-17xT Scope.
3. Accuracy International – AX AICSM40 Chassis.
4. Accuracy 1st Developmental Group – Applied Ballistics 4500NV Kestrel.
5. Badger Ordnance – 30mm MAX-50 Ultra High Scope rings, (3) 10 rd mags, (3) 5 rd mags.
6. SKB Cases – Custom hard case for rifle and accessories.
7. CorBon Ammunition – 200 rounds of 175 grain performance match ammunition.
8. TAB Gear – RAS USMC Precision Rifle Sling, rear bag and dope card.
9. U.S. Tactical Supply – One-Shot Package (data book kit) and HOG Saddle.
10. Bushnell – Tactical tripod with swivel head (same model issued to USMC Scout Snipers).
NOTE: Raffle is for U.S. Residents Only. Prize cannot ship outside the United States.
Charity Raffle FAQ
Q: Will there be runner-up prizes?
A: No, there will be one winner only. That one person will win ALL the items listed above.
Q: Where do I buy the raffle tickets? Can I buy more than one?
A: Go to the USMC SSA Raffle Page, and select “USTS USMC 8541 TKT” for your shopping cart. Use the “Quantity” field to set the number of tickets you buy — one or more than one.
Q: Is this legit? How do I know the funds will go to a good cause?
A. The U.S. Marine Corps Scout/Sniper Assn. is a non-profit, tax-exempt fraternal veterans association covered under IRS Ruling 501(C)(19). This is a legitimate, established group that does good works.
|
